# This file was automatically generated by SWIG (https://www.swig.org).
# Version 4.4.1
#
# Do not make changes to this file unless you know what you are doing - modify
# the SWIG interface file instead.

from sys import version_info as _swig_python_version_info
# Import the low-level C/C++ module
if getattr(globals().get("__spec__"), "parent", None) or __package__ or "." in __name__:
    from . import _vsp_g
else:
    import _vsp_g

try:
    import builtins as __builtin__
except ImportError:
    import __builtin__

def _swig_repr(self):
    try:
        strthis = "proxy of " + self.this.__repr__()
    except __builtin__.Exception:
        strthis = ""
    return "<%s.%s; %s >" % (self.__class__.__module__, self.__class__.__name__, strthis,)


def _swig_setattr_nondynamic_instance_variable(set):
    def set_instance_attr(self, name, value):
        if name == "this":
            set(self, name, value)
        elif name == "thisown":
            self.this.own(value)
        elif hasattr(self, name) and isinstance(getattr(type(self), name), property):
            set(self, name, value)
        else:
            raise AttributeError("You cannot add instance attributes to %s" % self)
    return set_instance_attr


def _swig_setattr_nondynamic_class_variable(set):
    def set_class_attr(cls, name, value):
        if hasattr(cls, name) and not isinstance(getattr(cls, name), property):
            set(cls, name, value)
        else:
            raise AttributeError("You cannot add class attributes to %s" % cls)
    return set_class_attr


def _swig_add_metaclass(metaclass):
    """Class decorator for adding a metaclass to a SWIG wrapped class - a slimmed down version of six.add_metaclass"""
    def wrapper(cls):
        return metaclass(cls.__name__, cls.__bases__, cls.__dict__.copy())
    return wrapper


class _SwigNonDynamicMeta(type):
    """Meta class to enforce nondynamic attributes (no new attributes) for a class"""
    __setattr__ = _swig_setattr_nondynamic_class_variable(type.__setattr__)


class SwigPyIterator(object):
    r"""Proxy of C++ swig::SwigPyIterator class."""

    thisown = property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc="The membership flag")

    def __init__(self, *args, **kwargs):
        raise AttributeError("No constructor defined - class is abstract")
    __repr__ = _swig_repr
    __swig_destroy__ = _vsp_g.delete_SwigPyIterator

    def value(self):
        r"""value(SwigPyIterator self) -> PyObject *"""
        return _vsp_g.SwigPyIterator_value(self)

    def incr(self, n=1):
        r"""incr(SwigPyIterator self, size_t n=1) -> SwigPyIterator"""
        return _vsp_g.SwigPyIterator_incr(self, n)

    def decr(self, n=1):
        r"""decr(SwigPyIterator self, size_t n=1) -> SwigPyIterator"""
        return _vsp_g.SwigPyIterator_decr(self, n)

    def distance(self, x):
        r"""distance(SwigPyIterator self, SwigPyIterator x) -> ptrdiff_t"""
        return _vsp_g.SwigPyIterator_distance(self, x)

    def equal(self, x):
        r"""equal(SwigPyIterator self, SwigPyIterator x) -> bool"""
        return _vsp_g.SwigPyIterator_equal(self, x)

    def copy(self):
        r"""copy(SwigPyIterator self) -> SwigPyIterator"""
        return _vsp_g.SwigPyIterator_copy(self)

    def next(self):
        r"""next(SwigPyIterator self) -> PyObject *"""
        return _vsp_g.SwigPyIterator_next(self)

    def __next__(self):
        r"""__next__(SwigPyIterator self) -> PyObject *"""
        return _vsp_g.SwigPyIterator___next__(self)

    def previous(self):
        r"""previous(SwigPyIterator self) -> PyObject *"""
        return _vsp_g.SwigPyIterator_previous(self)

    def advance(self, n):
        r"""advance(SwigPyIterator self, ptrdiff_t n) -> SwigPyIterator"""
        return _vsp_g.SwigPyIterator_advance(self, n)

    def __eq__(self, x):
        r"""__eq__(SwigPyIterator self, SwigPyIterator x) -> bool"""
        return _vsp_g.SwigPyIterator___eq__(self, x)

    def __ne__(self, x):
        r"""__ne__(SwigPyIterator self, SwigPyIterator x) -> bool"""
        return _vsp_g.SwigPyIterator___ne__(self, x)

    def __iadd__(self, n):
        r"""__iadd__(SwigPyIterator self, ptrdiff_t n) -> SwigPyIterator"""
        return _vsp_g.SwigPyIterator___iadd__(self, n)

    def __isub__(self, n):
        r"""__isub__(SwigPyIterator self, ptrdiff_t n) -> SwigPyIterator"""
        return _vsp_g.SwigPyIterator___isub__(self, n)

    def __add__(self, n):
        r"""__add__(SwigPyIterator self, ptrdiff_t n) -> SwigPyIterator"""
        return _vsp_g.SwigPyIterator___add__(self, n)

    def __sub__(self, *args):
        r"""
        __sub__(SwigPyIterator self, ptrdiff_t n) -> SwigPyIterator
        __sub__(SwigPyIterator self, SwigPyIterator x) -> ptrdiff_t
        """
        return _vsp_g.SwigPyIterator___sub__(self, *args)
    def __iter__(self):
        return self

# Register SwigPyIterator in _vsp_g:
_vsp_g.SwigPyIterator_swigregister(SwigPyIterator)
class IntVector(object):
    r"""Proxy of C++ std::vector< int > class."""

    thisown = property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc="The membership flag")
    __repr__ = _swig_repr

    def iterator(self):
        r"""iterator(IntVector self) -> SwigPyIterator"""
        return _vsp_g.IntVector_iterator(self)
    def __iter__(self):
        return self.iterator()

    def __nonzero__(self):
        r"""__nonzero__(IntVector self) -> bool"""
        return _vsp_g.IntVector___nonzero__(self)

    def __bool__(self):
        r"""__bool__(IntVector self) -> bool"""
        return _vsp_g.IntVector___bool__(self)

    def __len__(self):
        r"""__len__(IntVector self) -> std::vector< int >::size_type"""
        return _vsp_g.IntVector___len__(self)

    def __getslice__(self, i, j):
        r"""__getslice__(IntVector self, std::vector< int >::difference_type i, std::vector< int >::difference_type j) -> IntVector"""
        return _vsp_g.IntVector___getslice__(self, i, j)

    def __setslice__(self, *args):
        r"""
        __setslice__(IntVector self, std::vector< int >::difference_type i, std::vector< int >::difference_type j)
        __setslice__(IntVector self, std::vector< int >::difference_type i, std::vector< int >::difference_type j, IntVector v)
        """
        return _vsp_g.IntVector___setslice__(self, *args)

    def __delslice__(self, i, j):
        r"""__delslice__(IntVector self, std::vector< int >::difference_type i, std::vector< int >::difference_type j)"""
        return _vsp_g.IntVector___delslice__(self, i, j)

    def __delitem__(self, *args):
        r"""
        __delitem__(IntVector self, std::vector< int >::difference_type i)
        __delitem__(IntVector self, SWIGPY_SLICEOBJECT * slice)
        """
        return _vsp_g.IntVector___delitem__(self, *args)

    def __getitem__(self, *args):
        r"""
        __getitem__(IntVector self, SWIGPY_SLICEOBJECT * slice) -> IntVector
        __getitem__(IntVector self, std::vector< int >::difference_type i) -> std::vector< int >::value_type const &
        """
        return _vsp_g.IntVector___getitem__(self, *args)

    def __setitem__(self, *args):
        r"""
        __setitem__(IntVector self, SWIGPY_SLICEOBJECT * slice, IntVector v)
        __setitem__(IntVector self, SWIGPY_SLICEOBJECT * slice)
        __setitem__(IntVector self, std::vector< int >::difference_type i, std::vector< int >::value_type const & x)
        """
        return _vsp_g.IntVector___setitem__(self, *args)

    def pop(self):
        r"""pop(IntVector self) -> std::vector< int >::value_type"""
        return _vsp_g.IntVector_pop(self)

    def append(self, x):
        r"""append(IntVector self, std::vector< int >::value_type const & x)"""
        return _vsp_g.IntVector_append(self, x)

    def empty(self):
        r"""empty(IntVector self) -> bool"""
        return _vsp_g.IntVector_empty(self)

    def size(self):
        r"""size(IntVector self) -> std::vector< int >::size_type"""
        return _vsp_g.IntVector_size(self)

    def swap(self, v):
        r"""swap(IntVector self, IntVector v)"""
        return _vsp_g.IntVector_swap(self, v)

    def begin(self):
        r"""begin(IntVector self) -> std::vector< int >::iterator"""
        return _vsp_g.IntVector_begin(self)

    def end(self):
        r"""end(IntVector self) -> std::vector< int >::iterator"""
        return _vsp_g.IntVector_end(self)

    def rbegin(self):
        r"""rbegin(IntVector self) -> std::vector< int >::reverse_iterator"""
        return _vsp_g.IntVector_rbegin(self)

    def rend(self):
        r"""rend(IntVector self) -> std::vector< int >::reverse_iterator"""
        return _vsp_g.IntVector_rend(self)

    def clear(self):
        r"""clear(IntVector self)"""
        return _vsp_g.IntVector_clear(self)

    def get_allocator(self):
        r"""get_allocator(IntVector self) -> std::vector< int >::allocator_type"""
        return _vsp_g.IntVector_get_allocator(self)

    def pop_back(self):
        r"""pop_back(IntVector self)"""
        return _vsp_g.IntVector_pop_back(self)

    def erase(self, *args):
        r"""
        erase(IntVector self, std::vector< int >::iterator pos) -> std::vector< int >::iterator
        erase(IntVector self, std::vector< int >::iterator first, std::vector< int >::iterator last) -> std::vector< int >::iterator
        """
        return _vsp_g.IntVector_erase(self, *args)

    def __init__(self, *args):
        r"""
        __init__(IntVector self) -> IntVector
        __init__(IntVector self, IntVector other) -> IntVector
        __init__(IntVector self, std::vector< int >::size_type size) -> IntVector
        __init__(IntVector self, std::vector< int >::size_type size, std::vector< int >::value_type const & value) -> IntVector
        """
        _vsp_g.IntVector_swiginit(self, _vsp_g.new_IntVector(*args))

    def push_back(self, x):
        r"""push_back(IntVector self, std::vector< int >::value_type const & x)"""
        return _vsp_g.IntVector_push_back(self, x)

    def front(self):
        r"""front(IntVector self) -> std::vector< int >::value_type const &"""
        return _vsp_g.IntVector_front(self)

    def back(self):
        r"""back(IntVector self) -> std::vector< int >::value_type const &"""
        return _vsp_g.IntVector_back(self)

    def assign(self, n, x):
        r"""assign(IntVector self, std::vector< int >::size_type n, std::vector< int >::value_type const & x)"""
        return _vsp_g.IntVector_assign(self, n, x)

    def resize(self, *args):
        r"""
        resize(IntVector self, std::vector< int >::size_type new_size)
        resize(IntVector self, std::vector< int >::size_type new_size, std::vector< int >::value_type const & x)
        """
        return _vsp_g.IntVector_resize(self, *args)

    def insert(self, *args):
        r"""
        insert(IntVector self, std::vector< int >::iterator pos, std::vector< int >::value_type const & x) -> std::vector< int >::iterator
        insert(IntVector self, std::vector< int >::iterator pos, std::vector< int >::size_type n, std::vector< int >::value_type const & x)
        """
        return _vsp_g.IntVector_insert(self, *args)

    def reserve(self, n):
        r"""reserve(IntVector self, std::vector< int >::size_type n)"""
        return _vsp_g.IntVector_reserve(self, n)

    def capacity(self):
        r"""capacity(IntVector self) -> std::vector< int >::size_type"""
        return _vsp_g.IntVector_capacity(self)
    __swig_destroy__ = _vsp_g.delete_IntVector

# Register IntVector in _vsp_g:
_vsp_g.IntVector_swigregister(IntVector)
class DoubleVector(object):
    r"""Proxy of C++ std::vector< double > class."""

    thisown = property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc="The membership flag")
    __repr__ = _swig_repr

    def iterator(self):
        r"""iterator(DoubleVector self) -> SwigPyIterator"""
        return _vsp_g.DoubleVector_iterator(self)
    def __iter__(self):
        return self.iterator()

    def __nonzero__(self):
        r"""__nonzero__(DoubleVector self) -> bool"""
        return _vsp_g.DoubleVector___nonzero__(self)

    def __bool__(self):
        r"""__bool__(DoubleVector self) -> bool"""
        return _vsp_g.DoubleVector___bool__(self)

    def __len__(self):
        r"""__len__(DoubleVector self) -> std::vector< double >::size_type"""
        return _vsp_g.DoubleVector___len__(self)

    def __getslice__(self, i, j):
        r"""__getslice__(DoubleVector self, std::vector< double >::difference_type i, std::vector< double >::difference_type j) -> DoubleVector"""
        return _vsp_g.DoubleVector___getslice__(self, i, j)

    def __setslice__(self, *args):
        r"""
        __setslice__(DoubleVector self, std::vector< double >::difference_type i, std::vector< double >::difference_type j)
        __setslice__(DoubleVector self, std::vector< double >::difference_type i, std::vector< double >::difference_type j, DoubleVector v)
        """
        return _vsp_g.DoubleVector___setslice__(self, *args)

    def __delslice__(self, i, j):
        r"""__delslice__(DoubleVector self, std::vector< double >::difference_type i, std::vector< double >::difference_type j)"""
        return _vsp_g.DoubleVector___delslice__(self, i, j)

    def __delitem__(self, *args):
        r"""
        __delitem__(DoubleVector self, std::vector< double >::difference_type i)
        __delitem__(DoubleVector self, SWIGPY_SLICEOBJECT * slice)
        """
        return _vsp_g.DoubleVector___delitem__(self, *args)

    def __getitem__(self, *args):
        r"""
        __getitem__(DoubleVector self, SWIGPY_SLICEOBJECT * slice) -> DoubleVector
        __getitem__(DoubleVector self, std::vector< double >::difference_type i) -> std::vector< double >::value_type const &
        """
        return _vsp_g.DoubleVector___getitem__(self, *args)

    def __setitem__(self, *args):
        r"""
        __setitem__(DoubleVector self, SWIGPY_SLICEOBJECT * slice, DoubleVector v)
        __setitem__(DoubleVector self, SWIGPY_SLICEOBJECT * slice)
        __setitem__(DoubleVector self, std::vector< double >::difference_type i, std::vector< double >::value_type const & x)
        """
        return _vsp_g.DoubleVector___setitem__(self, *args)

    def pop(self):
        r"""pop(DoubleVector self) -> std::vector< double >::value_type"""
        return _vsp_g.DoubleVector_pop(self)

    def append(self, x):
        r"""append(DoubleVector self, std::vector< double >::value_type const & x)"""
        return _vsp_g.DoubleVector_append(self, x)

    def empty(self):
        r"""empty(DoubleVector self) -> bool"""
        return _vsp_g.DoubleVector_empty(self)

    def size(self):
        r"""size(DoubleVector self) -> std::vector< double >::size_type"""
        return _vsp_g.DoubleVector_size(self)

    def swap(self, v):
        r"""swap(DoubleVector self, DoubleVector v)"""
        return _vsp_g.DoubleVector_swap(self, v)

    def begin(self):
        r"""begin(DoubleVector self) -> std::vector< double >::iterator"""
        return _vsp_g.DoubleVector_begin(self)

    def end(self):
        r"""end(DoubleVector self) -> std::vector< double >::iterator"""
        return _vsp_g.DoubleVector_end(self)

    def rbegin(self):
        r"""rbegin(DoubleVector self) -> std::vector< double >::reverse_iterator"""
        return _vsp_g.DoubleVector_rbegin(self)

    def rend(self):
        r"""rend(DoubleVector self) -> std::vector< double >::reverse_iterator"""
        return _vsp_g.DoubleVector_rend(self)

    def clear(self):
        r"""clear(DoubleVector self)"""
        return _vsp_g.DoubleVector_clear(self)

    def get_allocator(self):
        r"""get_allocator(DoubleVector self) -> std::vector< double >::allocator_type"""
        return _vsp_g.DoubleVector_get_allocator(self)

    def pop_back(self):
        r"""pop_back(DoubleVector self)"""
        return _vsp_g.DoubleVector_pop_back(self)

    def erase(self, *args):
        r"""
        erase(DoubleVector self, std::vector< double >::iterator pos) -> std::vector< double >::iterator
        erase(DoubleVector self, std::vector< double >::iterator first, std::vector< double >::iterator last) -> std::vector< double >::iterator
        """
        return _vsp_g.DoubleVector_erase(self, *args)

    def __init__(self, *args):
        r"""
        __init__(DoubleVector self) -> DoubleVector
        __init__(DoubleVector self, DoubleVector other) -> DoubleVector
        __init__(DoubleVector self, std::vector< double >::size_type size) -> DoubleVector
        __init__(DoubleVector self, std::vector< double >::size_type size, std::vector< double >::value_type const & value) -> DoubleVector
        """
        _vsp_g.DoubleVector_swiginit(self, _vsp_g.new_DoubleVector(*args))

    def push_back(self, x):
        r"""push_back(DoubleVector self, std::vector< double >::value_type const & x)"""
        return _vsp_g.DoubleVector_push_back(self, x)

    def front(self):
        r"""front(DoubleVector self) -> std::vector< double >::value_type const &"""
        return _vsp_g.DoubleVector_front(self)

    def back(self):
        r"""back(DoubleVector self) -> std::vector< double >::value_type const &"""
        return _vsp_g.DoubleVector_back(self)

    def assign(self, n, x):
        r"""assign(DoubleVector self, std::vector< double >::size_type n, std::vector< double >::value_type const & x)"""
        return _vsp_g.DoubleVector_assign(self, n, x)

    def resize(self, *args):
        r"""
        resize(DoubleVector self, std::vector< double >::size_type new_size)
        resize(DoubleVector self, std::vector< double >::size_type new_size, std::vector< double >::value_type const & x)
        """
        return _vsp_g.DoubleVector_resize(self, *args)

    def insert(self, *args):
        r"""
        insert(DoubleVector self, std::vector< double >::iterator pos, std::vector< double >::value_type const & x) -> std::vector< double >::iterator
        insert(DoubleVector self, std::vector< double >::iterator pos, std::vector< double >::size_type n, std::vector< double >::value_type const & x)
        """
        return _vsp_g.DoubleVector_insert(self, *args)

    def reserve(self, n):
        r"""reserve(DoubleVector self, std::vector< double >::size_type n)"""
        return _vsp_g.DoubleVector_reserve(self, n)

    def capacity(self):
        r"""capacity(DoubleVector self) -> std::vector< double >::size_type"""
        return _vsp_g.DoubleVector_capacity(self)
    __swig_destroy__ = _vsp_g.delete_DoubleVector

# Register DoubleVector in _vsp_g:
_vsp_g.DoubleVector_swigregister(DoubleVector)
class StringVector(object):
    r"""Proxy of C++ std::vector< std::string > class."""

    thisown = property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc="The membership flag")
    __repr__ = _swig_repr

    def iterator(self):
        r"""iterator(StringVector self) -> SwigPyIterator"""
        return _vsp_g.StringVector_iterator(self)
    def __iter__(self):
        return self.iterator()

    def __nonzero__(self):
        r"""__nonzero__(StringVector self) -> bool"""
        return _vsp_g.StringVector___nonzero__(self)

    def __bool__(self):
        r"""__bool__(StringVector self) -> bool"""
        return _vsp_g.StringVector___bool__(self)

    def __len__(self):
        r"""__len__(StringVector self) -> std::vector< std::string >::size_type"""
        return _vsp_g.StringVector___len__(self)

    def __getslice__(self, i, j):
        r"""__getslice__(StringVector self, std::vector< std::string >::difference_type i, std::vector< std::string >::difference_type j) -> StringVector"""
        return _vsp_g.StringVector___getslice__(self, i, j)

    def __setslice__(self, *args):
        r"""
        __setslice__(StringVector self, std::vector< std::string >::difference_type i, std::vector< std::string >::difference_type j)
        __setslice__(StringVector self, std::vector< std::string >::difference_type i, std::vector< std::string >::difference_type j, StringVector v)
        """
        return _vsp_g.StringVector___setslice__(self, *args)

    def __delslice__(self, i, j):
        r"""__delslice__(StringVector self, std::vector< std::string >::difference_type i, std::vector< std::string >::difference_type j)"""
        return _vsp_g.StringVector___delslice__(self, i, j)

    def __delitem__(self, *args):
        r"""
        __delitem__(StringVector self, std::vector< std::string >::difference_type i)
        __delitem__(StringVector self, SWIGPY_SLICEOBJECT * slice)
        """
        return _vsp_g.StringVector___delitem__(self, *args)

    def __getitem__(self, *args):
        r"""
        __getitem__(StringVector self, SWIGPY_SLICEOBJECT * slice) -> StringVector
        __getitem__(StringVector self, std::vector< std::string >::difference_type i) -> std::vector< std::string >::value_type const &
        """
        return _vsp_g.StringVector___getitem__(self, *args)

    def __setitem__(self, *args):
        r"""
        __setitem__(StringVector self, SWIGPY_SLICEOBJECT * slice, StringVector v)
        __setitem__(StringVector self, SWIGPY_SLICEOBJECT * slice)
        __setitem__(StringVector self, std::vector< std::string >::difference_type i, std::vector< std::string >::value_type const & x)
        """
        return _vsp_g.StringVector___setitem__(self, *args)

    def pop(self):
        r"""pop(StringVector self) -> std::vector< std::string >::value_type"""
        return _vsp_g.StringVector_pop(self)

    def append(self, x):
        r"""append(StringVector self, std::vector< std::string >::value_type const & x)"""
        return _vsp_g.StringVector_append(self, x)

    def empty(self):
        r"""empty(StringVector self) -> bool"""
        return _vsp_g.StringVector_empty(self)

    def size(self):
        r"""size(StringVector self) -> std::vector< std::string >::size_type"""
        return _vsp_g.StringVector_size(self)

    def swap(self, v):
        r"""swap(StringVector self, StringVector v)"""
        return _vsp_g.StringVector_swap(self, v)

    def begin(self):
        r"""begin(StringVector self) -> std::vector< std::string >::iterator"""
        return _vsp_g.StringVector_begin(self)

    def end(self):
        r"""end(StringVector self) -> std::vector< std::string >::iterator"""
        return _vsp_g.StringVector_end(self)

    def rbegin(self):
        r"""rbegin(StringVector self) -> std::vector< std::string >::reverse_iterator"""
        return _vsp_g.StringVector_rbegin(self)

    def rend(self):
        r"""rend(StringVector self) -> std::vector< std::string >::reverse_iterator"""
        return _vsp_g.StringVector_rend(self)

    def clear(self):
        r"""clear(StringVector self)"""
        return _vsp_g.StringVector_clear(self)

    def get_allocator(self):
        r"""get_allocator(StringVector self) -> std::vector< std::string >::allocator_type"""
        return _vsp_g.StringVector_get_allocator(self)

    def pop_back(self):
        r"""pop_back(StringVector self)"""
        return _vsp_g.StringVector_pop_back(self)

    def erase(self, *args):
        r"""
        erase(StringVector self, std::vector< std::string >::iterator pos) -> std::vector< std::string >::iterator
        erase(StringVector self, std::vector< std::string >::iterator first, std::vector< std::string >::iterator last) -> std::vector< std::string >::iterator
        """
        return _vsp_g.StringVector_erase(self, *args)

    def __init__(self, *args):
        r"""
        __init__(StringVector self) -> StringVector
        __init__(StringVector self, StringVector other) -> StringVector
        __init__(StringVector self, std::vector< std::string >::size_type size) -> StringVector
        __init__(StringVector self, std::vector< std::string >::size_type size, std::vector< std::string >::value_type const & value) -> StringVector
        """
        _vsp_g.StringVector_swiginit(self, _vsp_g.new_StringVector(*args))

    def push_back(self, x):
        r"""push_back(StringVector self, std::vector< std::string >::value_type const & x)"""
        return _vsp_g.StringVector_push_back(self, x)

    def front(self):
        r"""front(StringVector self) -> std::vector< std::string >::value_type const &"""
        return _vsp_g.StringVector_front(self)

    def back(self):
        r"""back(StringVector self) -> std::vector< std::string >::value_type const &"""
        return _vsp_g.StringVector_back(self)

    def assign(self, n, x):
        r"""assign(StringVector self, std::vector< std::string >::size_type n, std::vector< std::string >::value_type const & x)"""
        return _vsp_g.StringVector_assign(self, n, x)

    def resize(self, *args):
        r"""
        resize(StringVector self, std::vector< std::string >::size_type new_size)
        resize(StringVector self, std::vector< std::string >::size_type new_size, std::vector< std::string >::value_type const & x)
        """
        return _vsp_g.StringVector_resize(self, *args)

    def insert(self, *args):
        r"""
        insert(StringVector self, std::vector< std::string >::iterator pos, std::vector< std::string >::value_type const & x) -> std::vector< std::string >::iterator
        insert(StringVector self, std::vector< std::string >::iterator pos, std::vector< std::string >::size_type n, std::vector< std::string >::value_type const & x)
        """
        return _vsp_g.StringVector_insert(self, *args)

    def reserve(self, n):
        r"""reserve(StringVector self, std::vector< std::string >::size_type n)"""
        return _vsp_g.StringVector_reserve(self, n)

    def capacity(self):
        r"""capacity(StringVector self) -> std::vector< std::string >::size_type"""
        return _vsp_g.StringVector_capacity(self)
    __swig_destroy__ = _vsp_g.delete_StringVector

# Register StringVector in _vsp_g:
_vsp_g.StringVector_swigregister(StringVector)
class BoolVector(object):
    r"""Proxy of C++ std::vector< bool > class."""

    thisown = property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc="The membership flag")
    __repr__ = _swig_repr

    def iterator(self):
        r"""iterator(BoolVector self) -> SwigPyIterator"""
        return _vsp_g.BoolVector_iterator(self)
    def __iter__(self):
        return self.iterator()

    def __nonzero__(self):
        r"""__nonzero__(BoolVector self) -> bool"""
        return _vsp_g.BoolVector___nonzero__(self)

    def __bool__(self):
        r"""__bool__(BoolVector self) -> bool"""
        return _vsp_g.BoolVector___bool__(self)

    def __len__(self):
        r"""__len__(BoolVector self) -> std::vector< bool >::size_type"""
        return _vsp_g.BoolVector___len__(self)

    def __getslice__(self, i, j):
        r"""__getslice__(BoolVector self, std::vector< bool >::difference_type i, std::vector< bool >::difference_type j) -> BoolVector"""
        return _vsp_g.BoolVector___getslice__(self, i, j)

    def __setslice__(self, *args):
        r"""
        __setslice__(BoolVector self, std::vector< bool >::difference_type i, std::vector< bool >::difference_type j)
        __setslice__(BoolVector self, std::vector< bool >::difference_type i, std::vector< bool >::difference_type j, BoolVector v)
        """
        return _vsp_g.BoolVector___setslice__(self, *args)

    def __delslice__(self, i, j):
        r"""__delslice__(BoolVector self, std::vector< bool >::difference_type i, std::vector< bool >::difference_type j)"""
        return _vsp_g.BoolVector___delslice__(self, i, j)

    def __delitem__(self, *args):
        r"""
        __delitem__(BoolVector self, std::vector< bool >::difference_type i)
        __delitem__(BoolVector self, SWIGPY_SLICEOBJECT * slice)
        """
        return _vsp_g.BoolVector___delitem__(self, *args)

    def __getitem__(self, *args):
        r"""
        __getitem__(BoolVector self, SWIGPY_SLICEOBJECT * slice) -> BoolVector
        __getitem__(BoolVector self, std::vector< bool >::difference_type i) -> std::vector< bool >::value_type
        """
        return _vsp_g.BoolVector___getitem__(self, *args)

    def __setitem__(self, *args):
        r"""
        __setitem__(BoolVector self, SWIGPY_SLICEOBJECT * slice, BoolVector v)
        __setitem__(BoolVector self, SWIGPY_SLICEOBJECT * slice)
        __setitem__(BoolVector self, std::vector< bool >::difference_type i, std::vector< bool >::value_type x)
        """
        return _vsp_g.BoolVector___setitem__(self, *args)

    def pop(self):
        r"""pop(BoolVector self) -> std::vector< bool >::value_type"""
        return _vsp_g.BoolVector_pop(self)

    def append(self, x):
        r"""append(BoolVector self, std::vector< bool >::value_type x)"""
        return _vsp_g.BoolVector_append(self, x)

    def empty(self):
        r"""empty(BoolVector self) -> bool"""
        return _vsp_g.BoolVector_empty(self)

    def size(self):
        r"""size(BoolVector self) -> std::vector< bool >::size_type"""
        return _vsp_g.BoolVector_size(self)

    def swap(self, v):
        r"""swap(BoolVector self, BoolVector v)"""
        return _vsp_g.BoolVector_swap(self, v)

    def begin(self):
        r"""begin(BoolVector self) -> std::vector< bool >::iterator"""
        return _vsp_g.BoolVector_begin(self)

    def end(self):
        r"""end(BoolVector self) -> std::vector< bool >::iterator"""
        return _vsp_g.BoolVector_end(self)

    def rbegin(self):
        r"""rbegin(BoolVector self) -> std::vector< bool >::reverse_iterator"""
        return _vsp_g.BoolVector_rbegin(self)

    def rend(self):
        r"""rend(BoolVector self) -> std::vector< bool >::reverse_iterator"""
        return _vsp_g.BoolVector_rend(self)

    def clear(self):
        r"""clear(BoolVector self)"""
        return _vsp_g.BoolVector_clear(self)

    def get_allocator(self):
        r"""get_allocator(BoolVector self) -> std::vector< bool >::allocator_type"""
        return _vsp_g.BoolVector_get_allocator(self)

    def pop_back(self):
        r"""pop_back(BoolVector self)"""
        return _vsp_g.BoolVector_pop_back(self)

    def erase(self, *args):
        r"""
        erase(BoolVector self, std::vector< bool >::iterator pos) -> std::vector< bool >::iterator
        erase(BoolVector self, std::vector< bool >::iterator first, std::vector< bool >::iterator last) -> std::vector< bool >::iterator
        """
        return _vsp_g.BoolVector_erase(self, *args)

    def __init__(self, *args):
        r"""
        __init__(BoolVector self) -> BoolVector
        __init__(BoolVector self, BoolVector other) -> BoolVector
        __init__(BoolVector self, std::vector< bool >::size_type size) -> BoolVector
        __init__(BoolVector self, std::vector< bool >::size_type size, std::vector< bool >::value_type value) -> BoolVector
        """
        _vsp_g.BoolVector_swiginit(self, _vsp_g.new_BoolVector(*args))

    def push_back(self, x):
        r"""push_back(BoolVector self, std::vector< bool >::value_type x)"""
        return _vsp_g.BoolVector_push_back(self, x)

    def front(self):
        r"""front(BoolVector self) -> std::vector< bool >::value_type"""
        return _vsp_g.BoolVector_front(self)

    def back(self):
        r"""back(BoolVector self) -> std::vector< bool >::value_type"""
        return _vsp_g.BoolVector_back(self)

    def assign(self, n, x):
        r"""assign(BoolVector self, std::vector< bool >::size_type n, std::vector< bool >::value_type x)"""
        return _vsp_g.BoolVector_assign(self, n, x)

    def resize(self, *args):
        r"""
        resize(BoolVector self, std::vector< bool >::size_type new_size)
        resize(BoolVector self, std::vector< bool >::size_type new_size, std::vector< bool >::value_type x)
        """
        return _vsp_g.BoolVector_resize(self, *args)

    def insert(self, *args):
        r"""
        insert(BoolVector self, std::vector< bool >::iterator pos, std::vector< bool >::value_type x) -> std::vector< bool >::iterator
        insert(BoolVector self, std::vector< bool >::iterator pos, std::vector< bool >::size_type n, std::vector< bool >::value_type x)
        """
        return _vsp_g.BoolVector_insert(self, *args)

    def reserve(self, n):
        r"""reserve(BoolVector self, std::vector< bool >::size_type n)"""
        return _vsp_g.BoolVector_reserve(self, n)

    def capacity(self):
        r"""capacity(BoolVector self) -> std::vector< bool >::size_type"""
        return _vsp_g.BoolVector_capacity(self)
    __swig_destroy__ = _vsp_g.delete_BoolVector

# Register BoolVector in _vsp_g:
_vsp_g.BoolVector_swigregister(BoolVector)
class StringVecVec(object):
    r"""Proxy of C++ std::vector< std::vector< std::string > > class."""

    thisown = property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc="The membership flag")
    __repr__ = _swig_repr

    def iterator(self):
        r"""iterator(StringVecVec self) -> SwigPyIterator"""
        return _vsp_g.StringVecVec_iterator(self)
    def __iter__(self):
        return self.iterator()

    def __nonzero__(self):
        r"""__nonzero__(StringVecVec self) -> bool"""
        return _vsp_g.StringVecVec___nonzero__(self)

    def __bool__(self):
        r"""__bool__(StringVecVec self) -> bool"""
        return _vsp_g.StringVecVec___bool__(self)

    def __len__(self):
        r"""__len__(StringVecVec self) -> std::vector< std::vector< std::string > >::size_type"""
        return _vsp_g.StringVecVec___len__(self)

    def __getslice__(self, i, j):
        r"""__getslice__(StringVecVec self, std::vector< std::vector< std::string > >::difference_type i, std::vector< std::vector< std::string > >::difference_type j) -> StringVecVec"""
        return _vsp_g.StringVecVec___getslice__(self, i, j)

    def __setslice__(self, *args):
        r"""
        __setslice__(StringVecVec self, std::vector< std::vector< std::string > >::difference_type i, std::vector< std::vector< std::string > >::difference_type j)
        __setslice__(StringVecVec self, std::vector< std::vector< std::string > >::difference_type i, std::vector< std::vector< std::string > >::difference_type j, StringVecVec v)
        """
        return _vsp_g.StringVecVec___setslice__(self, *args)

    def __delslice__(self, i, j):
        r"""__delslice__(StringVecVec self, std::vector< std::vector< std::string > >::difference_type i, std::vector< std::vector< std::string > >::difference_type j)"""
        return _vsp_g.StringVecVec___delslice__(self, i, j)

    def __delitem__(self, *args):
        r"""
        __delitem__(StringVecVec self, std::vector< std::vector< std::string > >::difference_type i)
        __delitem__(StringVecVec self, SWIGPY_SLICEOBJECT * slice)
        """
        return _vsp_g.StringVecVec___delitem__(self, *args)

    def __getitem__(self, *args):
        r"""
        __getitem__(StringVecVec self, SWIGPY_SLICEOBJECT * slice) -> StringVecVec
        __getitem__(StringVecVec self, std::vector< std::vector< std::string > >::difference_type i) -> StringVector
        """
        return _vsp_g.StringVecVec___getitem__(self, *args)

    def __setitem__(self, *args):
        r"""
        __setitem__(StringVecVec self, SWIGPY_SLICEOBJECT * slice, StringVecVec v)
        __setitem__(StringVecVec self, SWIGPY_SLICEOBJECT * slice)
        __setitem__(StringVecVec self, std::vector< std::vector< std::string > >::difference_type i, StringVector x)
        """
        return _vsp_g.StringVecVec___setitem__(self, *args)

    def pop(self):
        r"""pop(StringVecVec self) -> StringVector"""
        return _vsp_g.StringVecVec_pop(self)

    def append(self, x):
        r"""append(StringVecVec self, StringVector x)"""
        return _vsp_g.StringVecVec_append(self, x)

    def empty(self):
        r"""empty(StringVecVec self) -> bool"""
        return _vsp_g.StringVecVec_empty(self)

    def size(self):
        r"""size(StringVecVec self) -> std::vector< std::vector< std::string > >::size_type"""
        return _vsp_g.StringVecVec_size(self)

    def swap(self, v):
        r"""swap(StringVecVec self, StringVecVec v)"""
        return _vsp_g.StringVecVec_swap(self, v)

    def begin(self):
        r"""begin(StringVecVec self) -> std::vector< std::vector< std::string > >::iterator"""
        return _vsp_g.StringVecVec_begin(self)

    def end(self):
        r"""end(StringVecVec self) -> std::vector< std::vector< std::string > >::iterator"""
        return _vsp_g.StringVecVec_end(self)

    def rbegin(self):
        r"""rbegin(StringVecVec self) -> std::vector< std::vector< std::string > >::reverse_iterator"""
        return _vsp_g.StringVecVec_rbegin(self)

    def rend(self):
        r"""rend(StringVecVec self) -> std::vector< std::vector< std::string > >::reverse_iterator"""
        return _vsp_g.StringVecVec_rend(self)

    def clear(self):
        r"""clear(StringVecVec self)"""
        return _vsp_g.StringVecVec_clear(self)

    def get_allocator(self):
        r"""get_allocator(StringVecVec self) -> std::vector< std::vector< std::string > >::allocator_type"""
        return _vsp_g.StringVecVec_get_allocator(self)

    def pop_back(self):
        r"""pop_back(StringVecVec self)"""
        return _vsp_g.StringVecVec_pop_back(self)

    def erase(self, *args):
        r"""
        erase(StringVecVec self, std::vector< std::vector< std::string > >::iterator pos) -> std::vector< std::vector< std::string > >::iterator
        erase(StringVecVec self, std::vector< std::vector< std::string > >::iterator first, std::vector< std::vector< std::string > >::iterator last) -> std::vector< std::vector< std::string > >::iterator
        """
        return _vsp_g.StringVecVec_erase(self, *args)

    def __init__(self, *args):
        r"""
        __init__(StringVecVec self) -> StringVecVec
        __init__(StringVecVec self, StringVecVec other) -> StringVecVec
        __init__(StringVecVec self, std::vector< std::vector< std::string > >::size_type size) -> StringVecVec
        __init__(StringVecVec self, std::vector< std::vector< std::string > >::size_type size, StringVector value) -> StringVecVec
        """
        _vsp_g.StringVecVec_swiginit(self, _vsp_g.new_StringVecVec(*args))

    def push_back(self, x):
        r"""push_back(StringVecVec self, StringVector x)"""
        return _vsp_g.StringVecVec_push_back(self, x)

    def front(self):
        r"""front(StringVecVec self) -> StringVector"""
        return _vsp_g.StringVecVec_front(self)

    def back(self):
        r"""back(StringVecVec self) -> StringVector"""
        return _vsp_g.StringVecVec_back(self)

    def assign(self, n, x):
        r"""assign(StringVecVec self, std::vector< std::vector< std::string > >::size_type n, StringVector x)"""
        return _vsp_g.StringVecVec_assign(self, n, x)

    def resize(self, *args):
        r"""
        resize(StringVecVec self, std::vector< std::vector< std::string > >::size_type new_size)
        resize(StringVecVec self, std::vector< std::vector< std::string > >::size_type new_size, StringVector x)
        """
        return _vsp_g.StringVecVec_resize(self, *args)

    def insert(self, *args):
        r"""
        insert(StringVecVec self, std::vector< std::vector< std::string > >::iterator pos, StringVector x) -> std::vector< std::vector< std::string > >::iterator
        insert(StringVecVec self, std::vector< std::vector< std::string > >::iterator pos, std::vector< std::vector< std::string > >::size_type n, StringVector x)
        """
        return _vsp_g.StringVecVec_insert(self, *args)

    def reserve(self, n):
        r"""reserve(StringVecVec self, std::vector< std::vector< std::string > >::size_type n)"""
        return _vsp_g.StringVecVec_reserve(self, n)

    def capacity(self):
        r"""capacity(StringVecVec self) -> std::vector< std::vector< std::string > >::size_type"""
        return _vsp_g.StringVecVec_capacity(self)
    __swig_destroy__ = _vsp_g.delete_StringVecVec

# Register StringVecVec in _vsp_g:
_vsp_g.StringVecVec_swigregister(StringVecVec)
class IntVecVec(object):
    r"""Proxy of C++ std::vector< std::vector< int > > class."""

    thisown = property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc="The membership flag")
    __repr__ = _swig_repr

    def iterator(self):
        r"""iterator(IntVecVec self) -> SwigPyIterator"""
        return _vsp_g.IntVecVec_iterator(self)
    def __iter__(self):
        return self.iterator()

    def __nonzero__(self):
        r"""__nonzero__(IntVecVec self) -> bool"""
        return _vsp_g.IntVecVec___nonzero__(self)

    def __bool__(self):
        r"""__bool__(IntVecVec self) -> bool"""
        return _vsp_g.IntVecVec___bool__(self)

    def __len__(self):
        r"""__len__(IntVecVec self) -> std::vector< std::vector< int > >::size_type"""
        return _vsp_g.IntVecVec___len__(self)

    def __getslice__(self, i, j):
        r"""__getslice__(IntVecVec self, std::vector< std::vector< int > >::difference_type i, std::vector< std::vector< int > >::difference_type j) -> IntVecVec"""
        return _vsp_g.IntVecVec___getslice__(self, i, j)

    def __setslice__(self, *args):
        r"""
        __setslice__(IntVecVec self, std::vector< std::vector< int > >::difference_type i, std::vector< std::vector< int > >::difference_type j)
        __setslice__(IntVecVec self, std::vector< std::vector< int > >::difference_type i, std::vector< std::vector< int > >::difference_type j, IntVecVec v)
        """
        return _vsp_g.IntVecVec___setslice__(self, *args)

    def __delslice__(self, i, j):
        r"""__delslice__(IntVecVec self, std::vector< std::vector< int > >::difference_type i, std::vector< std::vector< int > >::difference_type j)"""
        return _vsp_g.IntVecVec___delslice__(self, i, j)

    def __delitem__(self, *args):
        r"""
        __delitem__(IntVecVec self, std::vector< std::vector< int > >::difference_type i)
        __delitem__(IntVecVec self, SWIGPY_SLICEOBJECT * slice)
        """
        return _vsp_g.IntVecVec___delitem__(self, *args)

    def __getitem__(self, *args):
        r"""
        __getitem__(IntVecVec self, SWIGPY_SLICEOBJECT * slice) -> IntVecVec
        __getitem__(IntVecVec self, std::vector< std::vector< int > >::difference_type i) -> IntVector
        """
        return _vsp_g.IntVecVec___getitem__(self, *args)

    def __setitem__(self, *args):
        r"""
        __setitem__(IntVecVec self, SWIGPY_SLICEOBJECT * slice, IntVecVec v)
        __setitem__(IntVecVec self, SWIGPY_SLICEOBJECT * slice)
        __setitem__(IntVecVec self, std::vector< std::vector< int > >::difference_type i, IntVector x)
        """
        return _vsp_g.IntVecVec___setitem__(self, *args)

    def pop(self):
        r"""pop(IntVecVec self) -> IntVector"""
        return _vsp_g.IntVecVec_pop(self)

    def append(self, x):
        r"""append(IntVecVec self, IntVector x)"""
        return _vsp_g.IntVecVec_append(self, x)

    def empty(self):
        r"""empty(IntVecVec self) -> bool"""
        return _vsp_g.IntVecVec_empty(self)

    def size(self):
        r"""size(IntVecVec self) -> std::vector< std::vector< int > >::size_type"""
        return _vsp_g.IntVecVec_size(self)

    def swap(self, v):
        r"""swap(IntVecVec self, IntVecVec v)"""
        return _vsp_g.IntVecVec_swap(self, v)

    def begin(self):
        r"""begin(IntVecVec self) -> std::vector< std::vector< int > >::iterator"""
        return _vsp_g.IntVecVec_begin(self)

    def end(self):
        r"""end(IntVecVec self) -> std::vector< std::vector< int > >::iterator"""
        return _vsp_g.IntVecVec_end(self)

    def rbegin(self):
        r"""rbegin(IntVecVec self) -> std::vector< std::vector< int > >::reverse_iterator"""
        return _vsp_g.IntVecVec_rbegin(self)

    def rend(self):
        r"""rend(IntVecVec self) -> std::vector< std::vector< int > >::reverse_iterator"""
        return _vsp_g.IntVecVec_rend(self)

    def clear(self):
        r"""clear(IntVecVec self)"""
        return _vsp_g.IntVecVec_clear(self)

    def get_allocator(self):
        r"""get_allocator(IntVecVec self) -> std::vector< std::vector< int > >::allocator_type"""
        return _vsp_g.IntVecVec_get_allocator(self)

    def pop_back(self):
        r"""pop_back(IntVecVec self)"""
        return _vsp_g.IntVecVec_pop_back(self)

    def erase(self, *args):
        r"""
        erase(IntVecVec self, std::vector< std::vector< int > >::iterator pos) -> std::vector< std::vector< int > >::iterator
        erase(IntVecVec self, std::vector< std::vector< int > >::iterator first, std::vector< std::vector< int > >::iterator last) -> std::vector< std::vector< int > >::iterator
        """
        return _vsp_g.IntVecVec_erase(self, *args)

    def __init__(self, *args):
        r"""
        __init__(IntVecVec self) -> IntVecVec
        __init__(IntVecVec self, IntVecVec other) -> IntVecVec
        __init__(IntVecVec self, std::vector< std::vector< int > >::size_type size) -> IntVecVec
        __init__(IntVecVec self, std::vector< std::vector< int > >::size_type size, IntVector value) -> IntVecVec
        """
        _vsp_g.IntVecVec_swiginit(self, _vsp_g.new_IntVecVec(*args))

    def push_back(self, x):
        r"""push_back(IntVecVec self, IntVector x)"""
        return _vsp_g.IntVecVec_push_back(self, x)

    def front(self):
        r"""front(IntVecVec self) -> IntVector"""
        return _vsp_g.IntVecVec_front(self)

    def back(self):
        r"""back(IntVecVec self) -> IntVector"""
        return _vsp_g.IntVecVec_back(self)

    def assign(self, n, x):
        r"""assign(IntVecVec self, std::vector< std::vector< int > >::size_type n, IntVector x)"""
        return _vsp_g.IntVecVec_assign(self, n, x)

    def resize(self, *args):
        r"""
        resize(IntVecVec self, std::vector< std::vector< int > >::size_type new_size)
        resize(IntVecVec self, std::vector< std::vector< int > >::size_type new_size, IntVector x)
        """
        return _vsp_g.IntVecVec_resize(self, *args)

    def insert(self, *args):
        r"""
        insert(IntVecVec self, std::vector< std::vector< int > >::iterator pos, IntVector x) -> std::vector< std::vector< int > >::iterator
        insert(IntVecVec self, std::vector< std::vector< int > >::iterator pos, std::vector< std::vector< int > >::size_type n, IntVector x)
        """
        return _vsp_g.IntVecVec_insert(self, *args)

    def reserve(self, n):
        r"""reserve(IntVecVec self, std::vector< std::vector< int > >::size_type n)"""
        return _vsp_g.IntVecVec_reserve(self, n)

    def capacity(self):
        r"""capacity(IntVecVec self) -> std::vector< std::vector< int > >::size_type"""
        return _vsp_g.IntVecVec_capacity(self)
    __swig_destroy__ = _vsp_g.delete_IntVecVec

# Register IntVecVec in _vsp_g:
_vsp_g.IntVecVec_swigregister(IntVecVec)
class DoubleVecVec(object):
    r"""Proxy of C++ std::vector< std::vector< double > > class."""

    thisown = property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc="The membership flag")
    __repr__ = _swig_repr

    def iterator(self):
        r"""iterator(DoubleVecVec self) -> SwigPyIterator"""
        return _vsp_g.DoubleVecVec_iterator(self)
    def __iter__(self):
        return self.iterator()

    def __nonzero__(self):
        r"""__nonzero__(DoubleVecVec self) -> bool"""
        return _vsp_g.DoubleVecVec___nonzero__(self)

    def __bool__(self):
        r"""__bool__(DoubleVecVec self) -> bool"""
        return _vsp_g.DoubleVecVec___bool__(self)

    def __len__(self):
        r"""__len__(DoubleVecVec self) -> std::vector< std::vector< double > >::size_type"""
        return _vsp_g.DoubleVecVec___len__(self)

    def __getslice__(self, i, j):
        r"""__getslice__(DoubleVecVec self, std::vector< std::vector< double > >::difference_type i, std::vector< std::vector< double > >::difference_type j) -> DoubleVecVec"""
        return _vsp_g.DoubleVecVec___getslice__(self, i, j)

    def __setslice__(self, *args):
        r"""
        __setslice__(DoubleVecVec self, std::vector< std::vector< double > >::difference_type i, std::vector< std::vector< double > >::difference_type j)
        __setslice__(DoubleVecVec self, std::vector< std::vector< double > >::difference_type i, std::vector< std::vector< double > >::difference_type j, DoubleVecVec v)
        """
        return _vsp_g.DoubleVecVec___setslice__(self, *args)

    def __delslice__(self, i, j):
        r"""__delslice__(DoubleVecVec self, std::vector< std::vector< double > >::difference_type i, std::vector< std::vector< double > >::difference_type j)"""
        return _vsp_g.DoubleVecVec___delslice__(self, i, j)

    def __delitem__(self, *args):
        r"""
        __delitem__(DoubleVecVec self, std::vector< std::vector< double > >::difference_type i)
        __delitem__(DoubleVecVec self, SWIGPY_SLICEOBJECT * slice)
        """
        return _vsp_g.DoubleVecVec___delitem__(self, *args)

    def __getitem__(self, *args):
        r"""
        __getitem__(DoubleVecVec self, SWIGPY_SLICEOBJECT * slice) -> DoubleVecVec
        __getitem__(DoubleVecVec self, std::vector< std::vector< double > >::difference_type i) -> DoubleVector
        """
        return _vsp_g.DoubleVecVec___getitem__(self, *args)

    def __setitem__(self, *args):
        r"""
        __setitem__(DoubleVecVec self, SWIGPY_SLICEOBJECT * slice, DoubleVecVec v)
        __setitem__(DoubleVecVec self, SWIGPY_SLICEOBJECT * slice)
        __setitem__(DoubleVecVec self, std::vector< std::vector< double > >::difference_type i, DoubleVector x)
        """
        return _vsp_g.DoubleVecVec___setitem__(self, *args)

    def pop(self):
        r"""pop(DoubleVecVec self) -> DoubleVector"""
        return _vsp_g.DoubleVecVec_pop(self)

    def append(self, x):
        r"""append(DoubleVecVec self, DoubleVector x)"""
        return _vsp_g.DoubleVecVec_append(self, x)

    def empty(self):
        r"""empty(DoubleVecVec self) -> bool"""
        return _vsp_g.DoubleVecVec_empty(self)

    def size(self):
        r"""size(DoubleVecVec self) -> std::vector< std::vector< double > >::size_type"""
        return _vsp_g.DoubleVecVec_size(self)

    def swap(self, v):
        r"""swap(DoubleVecVec self, DoubleVecVec v)"""
        return _vsp_g.DoubleVecVec_swap(self, v)

    def begin(self):
        r"""begin(DoubleVecVec self) -> std::vector< std::vector< double > >::iterator"""
        return _vsp_g.DoubleVecVec_begin(self)

    def end(self):
        r"""end(DoubleVecVec self) -> std::vector< std::vector< double > >::iterator"""
        return _vsp_g.DoubleVecVec_end(self)

    def rbegin(self):
        r"""rbegin(DoubleVecVec self) -> std::vector< std::vector< double > >::reverse_iterator"""
        return _vsp_g.DoubleVecVec_rbegin(self)

    def rend(self):
        r"""rend(DoubleVecVec self) -> std::vector< std::vector< double > >::reverse_iterator"""
        return _vsp_g.DoubleVecVec_rend(self)

    def clear(self):
        r"""clear(DoubleVecVec self)"""
        return _vsp_g.DoubleVecVec_clear(self)

    def get_allocator(self):
        r"""get_allocator(DoubleVecVec self) -> std::vector< std::vector< double > >::allocator_type"""
        return _vsp_g.DoubleVecVec_get_allocator(self)

    def pop_back(self):
        r"""pop_back(DoubleVecVec self)"""
        return _vsp_g.DoubleVecVec_pop_back(self)

    def erase(self, *args):
        r"""
        erase(DoubleVecVec self, std::vector< std::vector< double > >::iterator pos) -> std::vector< std::vector< double > >::iterator
        erase(DoubleVecVec self, std::vector< std::vector< double > >::iterator first, std::vector< std::vector< double > >::iterator last) -> std::vector< std::vector< double > >::iterator
        """
        return _vsp_g.DoubleVecVec_erase(self, *args)

    def __init__(self, *args):
        r"""
        __init__(DoubleVecVec self) -> DoubleVecVec
        __init__(DoubleVecVec self, DoubleVecVec other) -> DoubleVecVec
        __init__(DoubleVecVec self, std::vector< std::vector< double > >::size_type size) -> DoubleVecVec
        __init__(DoubleVecVec self, std::vector< std::vector< double > >::size_type size, DoubleVector value) -> DoubleVecVec
        """
        _vsp_g.DoubleVecVec_swiginit(self, _vsp_g.new_DoubleVecVec(*args))

    def push_back(self, x):
        r"""push_back(DoubleVecVec self, DoubleVector x)"""
        return _vsp_g.DoubleVecVec_push_back(self, x)

    def front(self):
        r"""front(DoubleVecVec self) -> DoubleVector"""
        return _vsp_g.DoubleVecVec_front(self)

    def back(self):
        r"""back(DoubleVecVec self) -> DoubleVector"""
        return _vsp_g.DoubleVecVec_back(self)

    def assign(self, n, x):
        r"""assign(DoubleVecVec self, std::vector< std::vector< double > >::size_type n, DoubleVector x)"""
        return _vsp_g.DoubleVecVec_assign(self, n, x)

    def resize(self, *args):
        r"""
        resize(DoubleVecVec self, std::vector< std::vector< double > >::size_type new_size)
        resize(DoubleVecVec self, std::vector< std::vector< double > >::size_type new_size, DoubleVector x)
        """
        return _vsp_g.DoubleVecVec_resize(self, *args)

    def insert(self, *args):
        r"""
        insert(DoubleVecVec self, std::vector< std::vector< double > >::iterator pos, DoubleVector x) -> std::vector< std::vector< double > >::iterator
        insert(DoubleVecVec self, std::vector< std::vector< double > >::iterator pos, std::vector< std::vector< double > >::size_type n, DoubleVector x)
        """
        return _vsp_g.DoubleVecVec_insert(self, *args)

    def reserve(self, n):
        r"""reserve(DoubleVecVec self, std::vector< std::vector< double > >::size_type n)"""
        return _vsp_g.DoubleVecVec_reserve(self, n)

    def capacity(self):
        r"""capacity(DoubleVecVec self) -> std::vector< std::vector< double > >::size_type"""
        return _vsp_g.DoubleVecVec_capacity(self)
    __swig_destroy__ = _vsp_g.delete_DoubleVecVec

# Register DoubleVecVec in _vsp_g:
_vsp_g.DoubleVecVec_swigregister(DoubleVecVec)
class Vec3dVec(object):
    r"""Proxy of C++ std::vector< vec3d > class."""

    thisown = property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc="The membership flag")
    __repr__ = _swig_repr

    def iterator(self):
        r"""iterator(Vec3dVec self) -> SwigPyIterator"""
        return _vsp_g.Vec3dVec_iterator(self)
    def __iter__(self):
        return self.iterator()

    def __nonzero__(self):
        r"""__nonzero__(Vec3dVec self) -> bool"""
        return _vsp_g.Vec3dVec___nonzero__(self)

    def __bool__(self):
        r"""__bool__(Vec3dVec self) -> bool"""
        return _vsp_g.Vec3dVec___bool__(self)

    def __len__(self):
        r"""__len__(Vec3dVec self) -> std::vector< vec3d >::size_type"""
        return _vsp_g.Vec3dVec___len__(self)

    def __getslice__(self, i, j):
        r"""__getslice__(Vec3dVec self, std::vector< vec3d >::difference_type i, std::vector< vec3d >::difference_type j) -> Vec3dVec"""
        return _vsp_g.Vec3dVec___getslice__(self, i, j)

    def __setslice__(self, *args):
        r"""
        __setslice__(Vec3dVec self, std::vector< vec3d >::difference_type i, std::vector< vec3d >::difference_type j)
        __setslice__(Vec3dVec self, std::vector< vec3d >::difference_type i, std::vector< vec3d >::difference_type j, Vec3dVec v)
        """
        return _vsp_g.Vec3dVec___setslice__(self, *args)

    def __delslice__(self, i, j):
        r"""__delslice__(Vec3dVec self, std::vector< vec3d >::difference_type i, std::vector< vec3d >::difference_type j)"""
        return _vsp_g.Vec3dVec___delslice__(self, i, j)

    def __delitem__(self, *args):
        r"""
        __delitem__(Vec3dVec self, std::vector< vec3d >::difference_type i)
        __delitem__(Vec3dVec self, SWIGPY_SLICEOBJECT * slice)
        """
        return _vsp_g.Vec3dVec___delitem__(self, *args)

    def __getitem__(self, *args):
        r"""
        __getitem__(Vec3dVec self, SWIGPY_SLICEOBJECT * slice) -> Vec3dVec
        __getitem__(Vec3dVec self, std::vector< vec3d >::difference_type i) -> vec3d
        """
        return _vsp_g.Vec3dVec___getitem__(self, *args)

    def __setitem__(self, *args):
        r"""
        __setitem__(Vec3dVec self, SWIGPY_SLICEOBJECT * slice, Vec3dVec v)
        __setitem__(Vec3dVec self, SWIGPY_SLICEOBJECT * slice)
        __setitem__(Vec3dVec self, std::vector< vec3d >::difference_type i, vec3d x)
        """
        return _vsp_g.Vec3dVec___setitem__(self, *args)

    def pop(self):
        r"""pop(Vec3dVec self) -> vec3d"""
        return _vsp_g.Vec3dVec_pop(self)

    def append(self, x):
        r"""append(Vec3dVec self, vec3d x)"""
        return _vsp_g.Vec3dVec_append(self, x)

    def empty(self):
        r"""empty(Vec3dVec self) -> bool"""
        return _vsp_g.Vec3dVec_empty(self)

    def size(self):
        r"""size(Vec3dVec self) -> std::vector< vec3d >::size_type"""
        return _vsp_g.Vec3dVec_size(self)

    def swap(self, v):
        r"""swap(Vec3dVec self, Vec3dVec v)"""
        return _vsp_g.Vec3dVec_swap(self, v)

    def begin(self):
        r"""begin(Vec3dVec self) -> std::vector< vec3d >::iterator"""
        return _vsp_g.Vec3dVec_begin(self)

    def end(self):
        r"""end(Vec3dVec self) -> std::vector< vec3d >::iterator"""
        return _vsp_g.Vec3dVec_end(self)

    def rbegin(self):
        r"""rbegin(Vec3dVec self) -> std::vector< vec3d >::reverse_iterator"""
        return _vsp_g.Vec3dVec_rbegin(self)

    def rend(self):
        r"""rend(Vec3dVec self) -> std::vector< vec3d >::reverse_iterator"""
        return _vsp_g.Vec3dVec_rend(self)

    def clear(self):
        r"""clear(Vec3dVec self)"""
        return _vsp_g.Vec3dVec_clear(self)

    def get_allocator(self):
        r"""get_allocator(Vec3dVec self) -> std::vector< vec3d >::allocator_type"""
        return _vsp_g.Vec3dVec_get_allocator(self)

    def pop_back(self):
        r"""pop_back(Vec3dVec self)"""
        return _vsp_g.Vec3dVec_pop_back(self)

    def erase(self, *args):
        r"""
        erase(Vec3dVec self, std::vector< vec3d >::iterator pos) -> std::vector< vec3d >::iterator
        erase(Vec3dVec self, std::vector< vec3d >::iterator first, std::vector< vec3d >::iterator last) -> std::vector< vec3d >::iterator
        """
        return _vsp_g.Vec3dVec_erase(self, *args)

    def __init__(self, *args):
        r"""
        __init__(Vec3dVec self) -> Vec3dVec
        __init__(Vec3dVec self, Vec3dVec other) -> Vec3dVec
        __init__(Vec3dVec self, std::vector< vec3d >::size_type size) -> Vec3dVec
        __init__(Vec3dVec self, std::vector< vec3d >::size_type size, vec3d value) -> Vec3dVec
        """
        _vsp_g.Vec3dVec_swiginit(self, _vsp_g.new_Vec3dVec(*args))

    def push_back(self, x):
        r"""push_back(Vec3dVec self, vec3d x)"""
        return _vsp_g.Vec3dVec_push_back(self, x)

    def front(self):
        r"""front(Vec3dVec self) -> vec3d"""
        return _vsp_g.Vec3dVec_front(self)

    def back(self):
        r"""back(Vec3dVec self) -> vec3d"""
        return _vsp_g.Vec3dVec_back(self)

    def assign(self, n, x):
        r"""assign(Vec3dVec self, std::vector< vec3d >::size_type n, vec3d x)"""
        return _vsp_g.Vec3dVec_assign(self, n, x)

    def resize(self, *args):
        r"""
        resize(Vec3dVec self, std::vector< vec3d >::size_type new_size)
        resize(Vec3dVec self, std::vector< vec3d >::size_type new_size, vec3d x)
        """
        return _vsp_g.Vec3dVec_resize(self, *args)

    def insert(self, *args):
        r"""
        insert(Vec3dVec self, std::vector< vec3d >::iterator pos, vec3d x) -> std::vector< vec3d >::iterator
        insert(Vec3dVec self, std::vector< vec3d >::iterator pos, std::vector< vec3d >::size_type n, vec3d x)
        """
        return _vsp_g.Vec3dVec_insert(self, *args)

    def reserve(self, n):
        r"""reserve(Vec3dVec self, std::vector< vec3d >::size_type n)"""
        return _vsp_g.Vec3dVec_reserve(self, n)

    def capacity(self):
        r"""capacity(Vec3dVec self) -> std::vector< vec3d >::size_type"""
        return _vsp_g.Vec3dVec_capacity(self)

    def as_numpy(self):
        return _vsp_g.Vec3dVec_as_numpy(self)
    __swig_destroy__ = _vsp_g.delete_Vec3dVec

# Register Vec3dVec in _vsp_g:
_vsp_g.Vec3dVec_swigregister(Vec3dVec)
class Matrix4dVec(object):
    r"""Proxy of C++ std::vector< Matrix4d > class."""

    thisown = property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc="The membership flag")
    __repr__ = _swig_repr

    def iterator(self):
        r"""iterator(Matrix4dVec self) -> SwigPyIterator"""
        return _vsp_g.Matrix4dVec_iterator(self)
    def __iter__(self):
        return self.iterator()

    def __nonzero__(self):
        r"""__nonzero__(Matrix4dVec self) -> bool"""
        return _vsp_g.Matrix4dVec___nonzero__(self)

    def __bool__(self):
        r"""__bool__(Matrix4dVec self) -> bool"""
        return _vsp_g.Matrix4dVec___bool__(self)

    def __len__(self):
        r"""__len__(Matrix4dVec self) -> std::vector< Matrix4d >::size_type"""
        return _vsp_g.Matrix4dVec___len__(self)

    def __getslice__(self, i, j):
        r"""__getslice__(Matrix4dVec self, std::vector< Matrix4d >::difference_type i, std::vector< Matrix4d >::difference_type j) -> Matrix4dVec"""
        return _vsp_g.Matrix4dVec___getslice__(self, i, j)

    def __setslice__(self, *args):
        r"""
        __setslice__(Matrix4dVec self, std::vector< Matrix4d >::difference_type i, std::vector< Matrix4d >::difference_type j)
        __setslice__(Matrix4dVec self, std::vector< Matrix4d >::difference_type i, std::vector< Matrix4d >::difference_type j, Matrix4dVec v)
        """
        return _vsp_g.Matrix4dVec___setslice__(self, *args)

    def __delslice__(self, i, j):
        r"""__delslice__(Matrix4dVec self, std::vector< Matrix4d >::difference_type i, std::vector< Matrix4d >::difference_type j)"""
        return _vsp_g.Matrix4dVec___delslice__(self, i, j)

    def __delitem__(self, *args):
        r"""
        __delitem__(Matrix4dVec self, std::vector< Matrix4d >::difference_type i)
        __delitem__(Matrix4dVec self, SWIGPY_SLICEOBJECT * slice)
        """
        return _vsp_g.Matrix4dVec___delitem__(self, *args)

    def __getitem__(self, *args):
        r"""
        __getitem__(Matrix4dVec self, SWIGPY_SLICEOBJECT * slice) -> Matrix4dVec
        __getitem__(Matrix4dVec self, std::vector< Matrix4d >::difference_type i) -> Matrix4d
        """
        return _vsp_g.Matrix4dVec___getitem__(self, *args)

    def __setitem__(self, *args):
        r"""
        __setitem__(Matrix4dVec self, SWIGPY_SLICEOBJECT * slice, Matrix4dVec v)
        __setitem__(Matrix4dVec self, SWIGPY_SLICEOBJECT * slice)
        __setitem__(Matrix4dVec self, std::vector< Matrix4d >::difference_type i, Matrix4d x)
        """
        return _vsp_g.Matrix4dVec___setitem__(self, *args)

    def pop(self):
        r"""pop(Matrix4dVec self) -> Matrix4d"""
        return _vsp_g.Matrix4dVec_pop(self)

    def append(self, x):
        r"""append(Matrix4dVec self, Matrix4d x)"""
        return _vsp_g.Matrix4dVec_append(self, x)

    def empty(self):
        r"""empty(Matrix4dVec self) -> bool"""
        return _vsp_g.Matrix4dVec_empty(self)

    def size(self):
        r"""size(Matrix4dVec self) -> std::vector< Matrix4d >::size_type"""
        return _vsp_g.Matrix4dVec_size(self)

    def swap(self, v):
        r"""swap(Matrix4dVec self, Matrix4dVec v)"""
        return _vsp_g.Matrix4dVec_swap(self, v)

    def begin(self):
        r"""begin(Matrix4dVec self) -> std::vector< Matrix4d >::iterator"""
        return _vsp_g.Matrix4dVec_begin(self)

    def end(self):
        r"""end(Matrix4dVec self) -> std::vector< Matrix4d >::iterator"""
        return _vsp_g.Matrix4dVec_end(self)

    def rbegin(self):
        r"""rbegin(Matrix4dVec self) -> std::vector< Matrix4d >::reverse_iterator"""
        return _vsp_g.Matrix4dVec_rbegin(self)

    def rend(self):
        r"""rend(Matrix4dVec self) -> std::vector< Matrix4d >::reverse_iterator"""
        return _vsp_g.Matrix4dVec_rend(self)

    def clear(self):
        r"""clear(Matrix4dVec self)"""
        return _vsp_g.Matrix4dVec_clear(self)

    def get_allocator(self):
        r"""get_allocator(Matrix4dVec self) -> std::vector< Matrix4d >::allocator_type"""
        return _vsp_g.Matrix4dVec_get_allocator(self)

    def pop_back(self):
        r"""pop_back(Matrix4dVec self)"""
        return _vsp_g.Matrix4dVec_pop_back(self)

    def erase(self, *args):
        r"""
        erase(Matrix4dVec self, std::vector< Matrix4d >::iterator pos) -> std::vector< Matrix4d >::iterator
        erase(Matrix4dVec self, std::vector< Matrix4d >::iterator first, std::vector< Matrix4d >::iterator last) -> std::vector< Matrix4d >::iterator
        """
        return _vsp_g.Matrix4dVec_erase(self, *args)

    def __init__(self, *args):
        r"""
        __init__(Matrix4dVec self) -> Matrix4dVec
        __init__(Matrix4dVec self, Matrix4dVec other) -> Matrix4dVec
        __init__(Matrix4dVec self, std::vector< Matrix4d >::size_type size) -> Matrix4dVec
        __init__(Matrix4dVec self, std::vector< Matrix4d >::size_type size, Matrix4d value) -> Matrix4dVec
        """
        _vsp_g.Matrix4dVec_swiginit(self, _vsp_g.new_Matrix4dVec(*args))

    def push_back(self, x):
        r"""push_back(Matrix4dVec self, Matrix4d x)"""
        return _vsp_g.Matrix4dVec_push_back(self, x)

    def front(self):
        r"""front(Matrix4dVec self) -> Matrix4d"""
        return _vsp_g.Matrix4dVec_front(self)

    def back(self):
        r"""back(Matrix4dVec self) -> Matrix4d"""
        return _vsp_g.Matrix4dVec_back(self)

    def assign(self, n, x):
        r"""assign(Matrix4dVec self, std::vector< Matrix4d >::size_type n, Matrix4d x)"""
        return _vsp_g.Matrix4dVec_assign(self, n, x)

    def resize(self, *args):
        r"""
        resize(Matrix4dVec self, std::vector< Matrix4d >::size_type new_size)
        resize(Matrix4dVec self, std::vector< Matrix4d >::size_type new_size, Matrix4d x)
        """
        return _vsp_g.Matrix4dVec_resize(self, *args)

    def insert(self, *args):
        r"""
        insert(Matrix4dVec self, std::vector< Matrix4d >::iterator pos, Matrix4d x) -> std::vector< Matrix4d >::iterator
        insert(Matrix4dVec self, std::vector< Matrix4d >::iterator pos, std::vector< Matrix4d >::size_type n, Matrix4d x)
        """
        return _vsp_g.Matrix4dVec_insert(self, *args)

    def reserve(self, n):
        r"""reserve(Matrix4dVec self, std::vector< Matrix4d >::size_type n)"""
        return _vsp_g.Matrix4dVec_reserve(self, n)

    def capacity(self):
        r"""capacity(Matrix4dVec self) -> std::vector< Matrix4d >::size_type"""
        return _vsp_g.Matrix4dVec_capacity(self)
    __swig_destroy__ = _vsp_g.delete_Matrix4dVec

# Register Matrix4dVec in _vsp_g:
_vsp_g.Matrix4dVec_swigregister(Matrix4dVec)
ABS = _vsp_g.ABS
r"""Absolute position"""
REL = _vsp_g.REL
r"""Relative position"""
SELIG_AF_EXPORT = _vsp_g.SELIG_AF_EXPORT
r"""Selig airfoil file format"""
BEZIER_AF_EXPORT = _vsp_g.BEZIER_AF_EXPORT
r"""Bezier airfoil file format"""
ALIGN_LEFT = _vsp_g.ALIGN_LEFT
r"""Align to left"""
ALIGN_CENTER = _vsp_g.ALIGN_CENTER
r"""Align to center"""
ALIGN_RIGHT = _vsp_g.ALIGN_RIGHT
r"""Align to right"""
ALIGN_PIXEL = _vsp_g.ALIGN_PIXEL
r"""Align to specified pixel"""
ALIGN_TOP = _vsp_g.ALIGN_TOP
r"""Align to top"""
ALIGN_MIDDLE = _vsp_g.ALIGN_MIDDLE
r"""Align to middle"""
ALIGN_BOTTOM = _vsp_g.ALIGN_BOTTOM
r"""Align to bottom"""
NUM_ALIGN_TYPE = _vsp_g.NUM_ALIGN_TYPE
r"""Number of alignment types"""
ANG_RAD = _vsp_g.ANG_RAD
r"""Radians"""
ANG_DEG = _vsp_g.ANG_DEG
r"""Degrees"""
ANG_0 = _vsp_g.ANG_0
r"""Zero deg"""
ANG_90 = _vsp_g.ANG_90
r"""90 deg"""
ANG_180 = _vsp_g.ANG_180
r"""180 deg"""
ANG_270 = _vsp_g.ANG_270
r"""270 deg"""
NUM_ANG = _vsp_g.NUM_ANG
r"""Number of angle choices"""
ATMOS_TYPE_US_STANDARD_1976 = _vsp_g.ATMOS_TYPE_US_STANDARD_1976
r"""US Standard Atmosphere 1976 (default)"""
ATMOS_TYPE_HERRINGTON_1966 = _vsp_g.ATMOS_TYPE_HERRINGTON_1966
r"""USAF 1966"""
ATMOS_TYPE_MANUAL_P_R = _vsp_g.ATMOS_TYPE_MANUAL_P_R
r"""Manual: pressure and density control"""
ATMOS_TYPE_MANUAL_P_T = _vsp_g.ATMOS_TYPE_MANUAL_P_T
r"""Manual: pressure and temperature control"""
ATMOS_TYPE_MANUAL_R_T = _vsp_g.ATMOS_TYPE_MANUAL_R_T
r"""Manual: density and temperature control"""
ATMOS_TYPE_MANUAL_RE_L = _vsp_g.ATMOS_TYPE_MANUAL_RE_L
r"""Manual: Reynolds number and length control"""
ATTACH_TRANS_NONE = _vsp_g.ATTACH_TRANS_NONE
r"""No parent attachment for translations"""
ATTACH_TRANS_COMP = _vsp_g.ATTACH_TRANS_COMP
r"""Translation relative to parent body axes"""
ATTACH_TRANS_UV = _vsp_g.ATTACH_TRANS_UV
r"""Translation relative to parent surface coordinate frame"""
ATTACH_TRANS_RST = _vsp_g.ATTACH_TRANS_RST
r"""Translation relative to parent per-section volume coordinate frame"""
ATTACH_TRANS_LMN = _vsp_g.ATTACH_TRANS_LMN
r"""Translation relative to parent uniform volume coordinate frame"""
ATTACH_TRANS_EtaMN = _vsp_g.ATTACH_TRANS_EtaMN
r"""Translation relative to wing parent uniform eta volume coordinate frame"""
ATTACH_TRANS_NUM_TYPES = _vsp_g.ATTACH_TRANS_NUM_TYPES
r"""Number of translation attachment types"""
ATTACH_ROT_NONE = _vsp_g.ATTACH_ROT_NONE
r"""No parent attachment for rotations"""
ATTACH_ROT_COMP = _vsp_g.ATTACH_ROT_COMP
r"""Rotation relative to parent body axes"""
ATTACH_ROT_UV = _vsp_g.ATTACH_ROT_UV
r"""Rotation relative to parent surface coordinate frame"""
ATTACH_ROT_RST = _vsp_g.ATTACH_ROT_RST
r"""Rotation relative to parent per-section volume coordinate frame"""
ATTACH_ROT_LMN = _vsp_g.ATTACH_ROT_LMN
r"""Rotation relative to parent uniform volume coordinate frame"""
ATTACH_ROT_EtaMN = _vsp_g.ATTACH_ROT_EtaMN
r"""Rotation relative to wing parent eta volume coordinate frame"""
ATTACH_ROT_NUM_TYPES = _vsp_g.ATTACH_ROT_NUM_TYPES
r"""Number of rotation attachment types"""
ATTROBJ_PARM = _vsp_g.ATTROBJ_PARM
r"""Parm"""
ATTROBJ_GEOM = _vsp_g.ATTROBJ_GEOM
r"""Geom"""
ATTROBJ_VEH = _vsp_g.ATTROBJ_VEH
r"""Vehicle"""
ATTROBJ_SUBSURF = _vsp_g.ATTROBJ_SUBSURF
r"""SubSurf"""
ATTROBJ_MEASURE = _vsp_g.ATTROBJ_MEASURE
r"""Measure"""
ATTROBJ_LINK = _vsp_g.ATTROBJ_LINK
r"""Link"""
ATTROBJ_ADVLINK = _vsp_g.ATTROBJ_ADVLINK
r"""Adv Link"""
ATTROBJ_ATTR = _vsp_g.ATTROBJ_ATTR
r"""Attribute"""
ATTROBJ_COLLECTION = _vsp_g.ATTROBJ_COLLECTION
r"""Attribute Collection"""
ATTROBJ_XSEC = _vsp_g.ATTROBJ_XSEC
r"""Cross Section"""
ATTROBJ_SEC = _vsp_g.ATTROBJ_SEC
r"""Wing Section"""
ATTROBJ_MODE = _vsp_g.ATTROBJ_MODE
r"""Mode"""
ATTROBJ_SET = _vsp_g.ATTROBJ_SET
r"""Geom Set"""
ATTROBJ_VARGROUP = _vsp_g.ATTROBJ_VARGROUP
r"""Var Preset Group"""
ATTROBJ_VARSETTING = _vsp_g.ATTROBJ_VARSETTING
r"""Var Preset Setting"""
ATTROBJ_FREE = _vsp_g.ATTROBJ_FREE
r"""Unattached attribute"""
ATTR_GROUP_NONE = _vsp_g.ATTR_GROUP_NONE
r"""No event (user attributes)"""
ATTR_GROUP_WATERMARK = _vsp_g.ATTR_GROUP_WATERMARK
r"""Watermark group"""
NUM_ATTR_EVENT_GROUPS = _vsp_g.NUM_ATTR_EVENT_GROUPS
r"""Number attribute event groups"""
AUX_GEOM_ROTOR_TIP_PATH = _vsp_g.AUX_GEOM_ROTOR_TIP_PATH
r"""Rotor tip path"""
AUX_GEOM_ROTOR_BURST = _vsp_g.AUX_GEOM_ROTOR_BURST
r"""Rotor burst zone"""
AUX_GEOM_THREE_PT_GROUND = _vsp_g.AUX_GEOM_THREE_PT_GROUND
r"""Three contact point ground plane"""
AUX_GEOM_TWO_PT_GROUND = _vsp_g.AUX_GEOM_TWO_PT_GROUND
r"""Two contact point ground plane"""
AUX_GEOM_ONE_PT_GROUND = _vsp_g.AUX_GEOM_ONE_PT_GROUND
r"""One contact point ground plane"""
AUX_GEOM_THREE_PT_CCE = _vsp_g.AUX_GEOM_THREE_PT_CCE
r"""Three contact point composite clearance envelope"""
AUX_GEOM_SUPER_CONE = _vsp_g.AUX_GEOM_SUPER_CONE
r"""Super cone (XSecCurve based profile)"""
AUX_GEOM_SINGLE_GEAR = _vsp_g.AUX_GEOM_SINGLE_GEAR
r"""Single (potentially) off nominal gear"""
AUX_GEOM_ROTOR_FRAGMENT = _vsp_g.AUX_GEOM_ROTOR_FRAGMENT
r"""AC 20-128 A rotor fragment"""
AUX_GEOM_THROWN_BLADE = _vsp_g.AUX_GEOM_THROWN_BLADE
r"""AC 25.905-1 thrown blade"""
AUX_GEOM_TIRE_SPRAY = _vsp_g.AUX_GEOM_TIRE_SPRAY
r"""ESDU 83042a Tire spray pattern"""
AUX_GEOM_WHEEL_TIRE_FAILURE = _vsp_g.AUX_GEOM_WHEEL_TIRE_FAILURE
r"""AMC 25.734 Wheel and tire failure models"""
NUM_AUX_GEOM_MODES = _vsp_g.NUM_AUX_GEOM_MODES
r"""Number of auxiliary geom modes."""
BOGIE_CENTER_DIST = _vsp_g.BOGIE_CENTER_DIST
r"""Distance between centers"""
BOGIE_CENTER_DIST_FRAC = _vsp_g.BOGIE_CENTER_DIST_FRAC
r"""Fractional distance between centers"""
BOGIE_GAP = _vsp_g.BOGIE_GAP
r"""Gap"""
BOGIE_GAP_FRAC = _vsp_g.BOGIE_GAP_FRAC
r"""Fractional gap"""
NUM_BOGIE_SPACING_TYPE = _vsp_g.NUM_BOGIE_SPACING_TYPE
r"""Number of bogie spacing control modes"""
BOR_FLOWTHROUGH = _vsp_g.BOR_FLOWTHROUGH
r"""Flowthrough mode (default)"""
BOR_UPPER = _vsp_g.BOR_UPPER
r"""Upper surface mode"""
BOR_LOWER = _vsp_g.BOR_LOWER
r"""Lower surface mode"""
BOR_NUM_MODES = _vsp_g.BOR_NUM_MODES
r"""Number of Body of Revolution modes"""
MAX_CAMB = _vsp_g.MAX_CAMB
r"""Input maximum camber, calculate ideal lift coefficient"""
DESIGN_CL = _vsp_g.DESIGN_CL
r"""Input ideal lift coefficient, calculate maximum camber"""
CAM_TOP = _vsp_g.CAM_TOP
r"""Camera top view"""
CAM_FRONT = _vsp_g.CAM_FRONT
r"""Camera front view"""
CAM_FRONT_YUP = _vsp_g.CAM_FRONT_YUP
r"""Camera front Y-up view"""
CAM_LEFT = _vsp_g.CAM_LEFT
r"""Camera left view"""
CAM_LEFT_ISO = _vsp_g.CAM_LEFT_ISO
r"""Camera left isometric view"""
CAM_BOTTOM = _vsp_g.CAM_BOTTOM
r"""Camera bottom view"""
CAM_REAR = _vsp_g.CAM_REAR
r"""Camera rear view"""
CAM_RIGHT = _vsp_g.CAM_RIGHT
r"""Camera right view"""
CAM_RIGHT_ISO = _vsp_g.CAM_RIGHT_ISO
r"""Camera right isometric view"""
CAM_CENTER = _vsp_g.CAM_CENTER
r"""Camera center view"""
NO_END_CAP = _vsp_g.NO_END_CAP
r"""No end cap"""
FLAT_END_CAP = _vsp_g.FLAT_END_CAP
r"""Flat end cap"""
ROUND_END_CAP = _vsp_g.ROUND_END_CAP
r"""Round end cap"""
EDGE_END_CAP = _vsp_g.EDGE_END_CAP
r"""Edge end cap"""
SHARP_END_CAP = _vsp_g.SHARP_END_CAP
r"""Sharp end cap"""
POINT_END_CAP = _vsp_g.POINT_END_CAP
r"""Point end cap"""
ROUND_EXT_END_CAP_NONE = _vsp_g.ROUND_EXT_END_CAP_NONE
r"""Extended round end cap, but not extended"""
ROUND_EXT_END_CAP_LE = _vsp_g.ROUND_EXT_END_CAP_LE
r"""Extended round end cap, extend LE"""
ROUND_EXT_END_CAP_TE = _vsp_g.ROUND_EXT_END_CAP_TE
r"""Extended round end cap, extend TE"""
ROUND_EXT_END_CAP_BOTH = _vsp_g.ROUND_EXT_END_CAP_BOTH
r"""Extended round end cap, extend both"""
NUM_END_CAP_OPTIONS = _vsp_g.NUM_END_CAP_OPTIONS
r"""Number of end cap options"""
CFD_MIN_EDGE_LEN = _vsp_g.CFD_MIN_EDGE_LEN
r"""Minimum mesh edge length"""
CFD_MAX_EDGE_LEN = _vsp_g.CFD_MAX_EDGE_LEN
r"""Maximum mesh edge length"""
CFD_MAX_GAP = _vsp_g.CFD_MAX_GAP
r"""Maximum mesh edge gap"""
CFD_NUM_CIRCLE_SEGS = _vsp_g.CFD_NUM_CIRCLE_SEGS
r"""Number of edge segments to resolve circle"""
CFD_GROWTH_RATIO = _vsp_g.CFD_GROWTH_RATIO
r"""Maximum allowed edge growth ratio"""
CFD_LIMIT_GROWTH_FLAG = _vsp_g.CFD_LIMIT_GROWTH_FLAG
r"""Rigorous 3D growth limiting flag"""
CFD_INTERSECT_SUBSURFACE_FLAG = _vsp_g.CFD_INTERSECT_SUBSURFACE_FLAG
r"""Flag to intersect sub-surfaces"""
CFD_HALF_MESH_FLAG = _vsp_g.CFD_HALF_MESH_FLAG
r"""Flag to generate a half mesh"""
CFD_FAR_FIELD_FLAG = _vsp_g.CFD_FAR_FIELD_FLAG
r"""Flag to generate a far field mesh"""
CFD_FAR_MAX_EDGE_LEN = _vsp_g.CFD_FAR_MAX_EDGE_LEN
r"""Maximum far field mesh edge length"""
CFD_FAR_MAX_GAP = _vsp_g.CFD_FAR_MAX_GAP
r"""Maximum far field mesh edge gap"""
CFD_FAR_NUM_CIRCLE_SEGS = _vsp_g.CFD_FAR_NUM_CIRCLE_SEGS
r"""Number of far field edge segments to resolve circle"""
CFD_FAR_SIZE_ABS_FLAG = _vsp_g.CFD_FAR_SIZE_ABS_FLAG
r"""Relative or absolute size flag"""
CFD_FAR_LENGTH = _vsp_g.CFD_FAR_LENGTH
r"""Far field length"""
CFD_FAR_WIDTH = _vsp_g.CFD_FAR_WIDTH
r"""Far field width"""
CFD_FAR_HEIGHT = _vsp_g.CFD_FAR_HEIGHT
r"""Far field height"""
CFD_FAR_X_SCALE = _vsp_g.CFD_FAR_X_SCALE
r"""Far field X scale"""
CFD_FAR_Y_SCALE = _vsp_g.CFD_FAR_Y_SCALE
r"""Far field Y scale"""
CFD_FAR_Z_SCALE = _vsp_g.CFD_FAR_Z_SCALE
r"""Far field Z scale"""
CFD_FAR_LOC_MAN_FLAG = _vsp_g.CFD_FAR_LOC_MAN_FLAG
r"""Far field location flag: centered or manual"""
CFD_FAR_LOC_X = _vsp_g.CFD_FAR_LOC_X
r"""Far field X location"""
CFD_FAR_LOC_Y = _vsp_g.CFD_FAR_LOC_Y
r"""Far field Y location"""
CFD_FAR_LOC_Z = _vsp_g.CFD_FAR_LOC_Z
r"""Far field Z location"""
CFD_SRF_XYZ_FLAG = _vsp_g.CFD_SRF_XYZ_FLAG
r"""Flag to include X,Y,Z intersection curves in export files"""
CFD_STL_FILE_NAME = _vsp_g.CFD_STL_FILE_NAME
r"""STL export type"""
CFD_POLY_FILE_NAME = _vsp_g.CFD_POLY_FILE_NAME
r"""POLY export type"""
CFD_TRI_FILE_NAME = _vsp_g.CFD_TRI_FILE_NAME
r"""TRI export type"""
CFD_OBJ_FILE_NAME = _vsp_g.CFD_OBJ_FILE_NAME
r"""OBJ export type"""
CFD_DAT_FILE_NAME = _vsp_g.CFD_DAT_FILE_NAME
r"""DAT export type"""
CFD_KEY_FILE_NAME = _vsp_g.CFD_KEY_FILE_NAME
r"""KEY export type"""
CFD_GMSH_FILE_NAME = _vsp_g.CFD_GMSH_FILE_NAME
r"""GMSH export type"""
CFD_TKEY_FILE_NAME = _vsp_g.CFD_TKEY_FILE_NAME
r"""TKEY export type"""
CFD_FACET_FILE_NAME = _vsp_g.CFD_FACET_FILE_NAME
r"""FACET export type"""
CFD_VSPGEOM_FILE_NAME = _vsp_g.CFD_VSPGEOM_FILE_NAME
r"""VSPGEOM export type"""
CFD_NUM_FILE_NAMES = _vsp_g.CFD_NUM_FILE_NAMES
r"""Number of CFD Mesh export file types"""
POINT_SOURCE = _vsp_g.POINT_SOURCE
r"""Point source"""
LINE_SOURCE = _vsp_g.LINE_SOURCE
r"""Line source"""
BOX_SOURCE = _vsp_g.BOX_SOURCE
r"""Box source"""
ULINE_SOURCE = _vsp_g.ULINE_SOURCE
r"""Constant U Line source"""
WLINE_SOURCE = _vsp_g.WLINE_SOURCE
r"""Constant W Line source"""
NUM_SOURCE_TYPES = _vsp_g.NUM_SOURCE_TYPES
r"""Number of CFD Mesh source types"""
TAG = _vsp_g.TAG
r"""Color mesh by tag value (component, subsurface, part, etc)"""
REASON = _vsp_g.REASON
r"""Color mesh by local edge length reason"""
CF_LAM_BLASIUS = _vsp_g.CF_LAM_BLASIUS
r"""Blasius laminar Cf equation"""
CF_LAM_BLASIUS_W_HEAT = _vsp_g.CF_LAM_BLASIUS_W_HEAT
r"""Blasius laminar Cf equation with heat (NOT IMPLEMENTED)"""
CF_TURB_EXPLICIT_FIT_SPALDING = _vsp_g.CF_TURB_EXPLICIT_FIT_SPALDING
r"""Explicit Fit of Spalding turbulent Cf equation"""
CF_TURB_EXPLICIT_FIT_SPALDING_CHI = _vsp_g.CF_TURB_EXPLICIT_FIT_SPALDING_CHI
r"""Explicit Fit of Spalding and Chi turbulent Cf equation"""
CF_TURB_EXPLICIT_FIT_SCHOENHERR = _vsp_g.CF_TURB_EXPLICIT_FIT_SCHOENHERR
r"""Explicit Fit of Schoenherr turbulent Cf equation"""
DO_NOT_USE_CF_TURB_IMPLICIT_KARMAN = _vsp_g.DO_NOT_USE_CF_TURB_IMPLICIT_KARMAN
r"""Implicit Karman turbulent Cf equation (DO NOT USE)"""
CF_TURB_IMPLICIT_SCHOENHERR = _vsp_g.CF_TURB_IMPLICIT_SCHOENHERR
r"""Implicit Schoenherr turbulent Cf equation"""
CF_TURB_IMPLICIT_KARMAN_SCHOENHERR = _vsp_g.CF_TURB_IMPLICIT_KARMAN_SCHOENHERR
r"""Implicit Karman-Schoenherr turbulent Cf equation"""
CF_TURB_POWER_LAW_BLASIUS = _vsp_g.CF_TURB_POWER_LAW_BLASIUS
r"""Power Law Blasius turbulent Cf equation"""
CF_TURB_POWER_LAW_PRANDTL_LOW_RE = _vsp_g.CF_TURB_POWER_LAW_PRANDTL_LOW_RE
r"""Power Law Prandtl Low Re turbulent Cf equation"""
CF_TURB_POWER_LAW_PRANDTL_MEDIUM_RE = _vsp_g.CF_TURB_POWER_LAW_PRANDTL_MEDIUM_RE
r"""Power Law Prandtl Medium Re turbulent Cf equation"""
CF_TURB_POWER_LAW_PRANDTL_HIGH_RE = _vsp_g.CF_TURB_POWER_LAW_PRANDTL_HIGH_RE
r"""Power Law Prandtl High Re turbulent Cf equation"""
CF_TURB_SCHLICHTING_COMPRESSIBLE = _vsp_g.CF_TURB_SCHLICHTING_COMPRESSIBLE
r"""Schlichting Compressible turbulent Cf equation"""
DO_NOT_USE_CF_TURB_SCHLICHTING_INCOMPRESSIBLE = _vsp_g.DO_NOT_USE_CF_TURB_SCHLICHTING_INCOMPRESSIBLE
r"""Schlichting Incompressible turbulent Cf equation (DO NOT USE)"""
DO_NOT_USE_CF_TURB_SCHLICHTING_PRANDTL = _vsp_g.DO_NOT_USE_CF_TURB_SCHLICHTING_PRANDTL
r"""Schlichting-Prandtl turbulent Cf equation (DO NOT USE)"""
DO_NOT_USE_CF_TURB_SCHULTZ_GRUNOW_HIGH_RE = _vsp_g.DO_NOT_USE_CF_TURB_SCHULTZ_GRUNOW_HIGH_RE
r"""Schultz-Grunow High Re turbulent Cf equation (DO NOT USE)"""
CF_TURB_SCHULTZ_GRUNOW_SCHOENHERR = _vsp_g.CF_TURB_SCHULTZ_GRUNOW_SCHOENHERR
r"""Schultz-Grunow Estimate of Schoenherr turbulent Cf equation."""
DO_NOT_USE_CF_TURB_WHITE_CHRISTOPH_COMPRESSIBLE = _vsp_g.DO_NOT_USE_CF_TURB_WHITE_CHRISTOPH_COMPRESSIBLE
r"""White-Christoph Compressible turbulent Cf equation (DO NOT USE)"""
CF_TURB_ROUGHNESS_SCHLICHTING_AVG = _vsp_g.CF_TURB_ROUGHNESS_SCHLICHTING_AVG
r"""Roughness Schlichting Avg turbulent Cf equation."""
DO_NOT_USE_CF_TURB_ROUGHNESS_SCHLICHTING_LOCAL = _vsp_g.DO_NOT_USE_CF_TURB_ROUGHNESS_SCHLICHTING_LOCAL
r"""Roughness Schlichting Local turbulent Cf equation (DO NOT USE)"""
DO_NOT_USE_CF_TURB_ROUGHNESS_WHITE = _vsp_g.DO_NOT_USE_CF_TURB_ROUGHNESS_WHITE
r"""Roughness White turbulent Cf equation (DO NOT USE)"""
CF_TURB_ROUGHNESS_SCHLICHTING_AVG_FLOW_CORRECTION = _vsp_g.CF_TURB_ROUGHNESS_SCHLICHTING_AVG_FLOW_CORRECTION
r"""Roughness Schlichting Avg Compressible turbulent Cf equation."""
CF_TURB_HEATTRANSFER_WHITE_CHRISTOPH = _vsp_g.CF_TURB_HEATTRANSFER_WHITE_CHRISTOPH
r"""Heat Transfer White-Christoph turbulent Cf equation."""
CHEVRON_NONE = _vsp_g.CHEVRON_NONE
r"""No chevron."""
CHEVRON_PARTIAL = _vsp_g.CHEVRON_PARTIAL
r"""One or more chevrons of limited extent."""
CHEVRON_FULL = _vsp_g.CHEVRON_FULL
r"""Full period of chevrons."""
CHEVRON_NUM_TYPES = _vsp_g.CHEVRON_NUM_TYPES
r"""Number of chevron types."""
CHEVRON_W01_SE = _vsp_g.CHEVRON_W01_SE
r"""Start and End"""
CHEVRON_W01_CW = _vsp_g.CHEVRON_W01_CW
r"""Center and Width"""
CHEVRON_W01_NUM_MODES = _vsp_g.CHEVRON_W01_NUM_MODES
r"""Number of chevron W parameter mode types."""
COLLISION_OK = _vsp_g.COLLISION_OK
r"""No Error."""
COLLISION_INTERSECT_NO_SOLUTION = _vsp_g.COLLISION_INTERSECT_NO_SOLUTION
r"""Touching, no solution"""
COLLISION_CLEAR_NO_SOLUTION = _vsp_g.COLLISION_CLEAR_NO_SOLUTION
r"""Not touching, no solution"""
NO_FILE_TYPE = _vsp_g.NO_FILE_TYPE
r"""No export file type"""
COMP_GEOM_TXT_TYPE = _vsp_g.COMP_GEOM_TXT_TYPE

COMP_GEOM_CSV_TYPE = _vsp_g.COMP_GEOM_CSV_TYPE

DRAG_BUILD_TSV_TYPE_DEPRECATED = _vsp_g.DRAG_BUILD_TSV_TYPE_DEPRECATED

SLICE_TXT_TYPE = _vsp_g.SLICE_TXT_TYPE

MASS_PROP_TXT_TYPE = _vsp_g.MASS_PROP_TXT_TYPE

DEGEN_GEOM_CSV_TYPE = _vsp_g.DEGEN_GEOM_CSV_TYPE

DEGEN_GEOM_M_TYPE = _vsp_g.DEGEN_GEOM_M_TYPE

CFD_STL_TYPE = _vsp_g.CFD_STL_TYPE

CFD_POLY_TYPE = _vsp_g.CFD_POLY_TYPE

CFD_TRI_TYPE = _vsp_g.CFD_TRI_TYPE

CFD_OBJ_TYPE = _vsp_g.CFD_OBJ_TYPE

CFD_DAT_TYPE = _vsp_g.CFD_DAT_TYPE

CFD_KEY_TYPE = _vsp_g.CFD_KEY_TYPE

CFD_GMSH_TYPE = _vsp_g.CFD_GMSH_TYPE

CFD_SRF_TYPE_DEPRECATED = _vsp_g.CFD_SRF_TYPE_DEPRECATED

CFD_TKEY_TYPE = _vsp_g.CFD_TKEY_TYPE

PROJ_AREA_CSV_TYPE = _vsp_g.PROJ_AREA_CSV_TYPE

WAVE_DRAG_TXT_TYPE = _vsp_g.WAVE_DRAG_TXT_TYPE

VSPAERO_PANEL_TRI_TYPE = _vsp_g.VSPAERO_PANEL_TRI_TYPE

DRAG_BUILD_CSV_TYPE = _vsp_g.DRAG_BUILD_CSV_TYPE

CFD_FACET_TYPE = _vsp_g.CFD_FACET_TYPE

CFD_CURV_TYPE_DEPRECATED = _vsp_g.CFD_CURV_TYPE_DEPRECATED

CFD_PLOT3D_TYPE_DEPRECATED = _vsp_g.CFD_PLOT3D_TYPE_DEPRECATED

CFD_VSPGEOM_TYPE = _vsp_g.CFD_VSPGEOM_TYPE

VSPAERO_VSPGEOM_TYPE = _vsp_g.VSPAERO_VSPGEOM_TYPE

U_TRIM = _vsp_g.U_TRIM
r"""Trim by U coordinate"""
L_TRIM = _vsp_g.L_TRIM
r"""Trim by L coordinate"""
ETA_TRIM = _vsp_g.ETA_TRIM
r"""Trim by Eta coordinate"""
NUM_TRIM_TYPES = _vsp_g.NUM_TRIM_TYPES
r"""Number of conformal component trim types"""
DELIM_COMMA = _vsp_g.DELIM_COMMA
r"""Comma delimiter"""
DELIM_USCORE = _vsp_g.DELIM_USCORE
r"""Underscore delimiter"""
DELIM_SPACE = _vsp_g.DELIM_SPACE
r"""Space delimiter"""
DELIM_NONE = _vsp_g.DELIM_NONE
r"""No delimiter"""
DELIM_NUM_TYPES = _vsp_g.DELIM_NUM_TYPES
r"""Number of delimiter types"""
DEPTH_FRONT = _vsp_g.DEPTH_FRONT
r"""Set 3D background before model"""
DEPTH_REAR = _vsp_g.DEPTH_REAR
r"""Set 3D background behind model"""
DEPTH_FREE = _vsp_g.DEPTH_FREE
r"""Set 3D background at specified location"""
NUM_DEPTH_TYPE = _vsp_g.NUM_DEPTH_TYPE
r"""Number of depth types"""
SET_3D = _vsp_g.SET_3D
r"""3D DXF export (default)"""
SET_2D = _vsp_g.SET_2D
r"""2D DXF export"""
X_DIR = _vsp_g.X_DIR
r"""X direction"""
Y_DIR = _vsp_g.Y_DIR

Z_DIR = _vsp_g.Z_DIR

ALL_DIR = _vsp_g.ALL_DIR

DISPLAY_BEZIER = _vsp_g.DISPLAY_BEZIER
r"""Display the normal Bezier surface (default)"""
DISPLAY_DEGEN_SURF = _vsp_g.DISPLAY_DEGEN_SURF
r"""Display as surface Degen Geom"""
DISPLAY_DEGEN_PLATE = _vsp_g.DISPLAY_DEGEN_PLATE
r"""Display as plate Degen Geom"""
DISPLAY_DEGEN_CAMBER = _vsp_g.DISPLAY_DEGEN_CAMBER
r"""Display as camber Degen Geom"""
GEOM_DRAW_WIRE = _vsp_g.GEOM_DRAW_WIRE
r"""Draw the wireframe mesh (see through)"""
GEOM_DRAW_HIDDEN = _vsp_g.GEOM_DRAW_HIDDEN
r"""Draw the hidden mesh"""
GEOM_DRAW_SHADE = _vsp_g.GEOM_DRAW_SHADE
r"""Draw the shaded mesh"""
GEOM_DRAW_TEXTURE = _vsp_g.GEOM_DRAW_TEXTURE
r"""Draw the textured mesh"""
GEOM_DRAW_NONE = _vsp_g.GEOM_DRAW_NONE
r"""Do not draw anything"""
ENGINE_GEOM_NONE = _vsp_g.ENGINE_GEOM_NONE
r"""Component is not an integrated flowpath component."""
ENGINE_GEOM_INLET = _vsp_g.ENGINE_GEOM_INLET
r"""Component represents integrated flowpath inlet."""
ENGINE_GEOM_INLET_OUTLET = _vsp_g.ENGINE_GEOM_INLET_OUTLET
r"""Component represents integrated flowpath inlet and outlet."""
ENGINE_GEOM_OUTLET = _vsp_g.ENGINE_GEOM_OUTLET
r"""Component represents integrated flowpath outlet."""
ENGINE_GEOM_IO_NUM_TYPES = _vsp_g.ENGINE_GEOM_IO_NUM_TYPES
r"""Number of integrated flowpath component types."""
ENGINE_GEOM_FLOWTHROUGH = _vsp_g.ENGINE_GEOM_FLOWTHROUGH
r"""Component is modeled as flowthrough engine."""
ENGINE_GEOM_TO_LIP = _vsp_g.ENGINE_GEOM_TO_LIP
r"""Component is modeled to the lip."""
ENGINE_GEOM_FLOWPATH = _vsp_g.ENGINE_GEOM_FLOWPATH
r"""Component flowpath is modeled."""
ENGINE_GEOM_TO_FACE = _vsp_g.ENGINE_GEOM_TO_FACE
r"""Component is modeled to face."""
ENGINE_GEOM_NUM_TYPES = _vsp_g.ENGINE_GEOM_NUM_TYPES
r"""Number of integrated flowpath modeling types."""
ENGINE_LOC_INDEX = _vsp_g.ENGINE_LOC_INDEX
r"""Integrated flowpath key point identified by XSec index."""
ENGINE_LOC_U = _vsp_g.ENGINE_LOC_U
r"""Integrated flowpath key point identified by U parameter."""
ENGINE_LOC_INLET_LIP = _vsp_g.ENGINE_LOC_INLET_LIP
r"""Integrated flowpath key point is inlet lip."""
ENGINE_LOC_INLET_FACE = _vsp_g.ENGINE_LOC_INLET_FACE
r"""Integrated flowpath key point is inlet face."""
ENGINE_LOC_OUTLET_LIP = _vsp_g.ENGINE_LOC_OUTLET_LIP
r"""Integrated flowpath key point is outlet lip."""
ENGINE_LOC_OUTLET_FACE = _vsp_g.ENGINE_LOC_OUTLET_FACE
r"""Integrated flowpath key point is outlet face."""
ENGINE_LOC_NUM = _vsp_g.ENGINE_LOC_NUM
r"""Number of integrated flowpath key point locations."""
ENGINE_MODE_FLOWTHROUGH = _vsp_g.ENGINE_MODE_FLOWTHROUGH
r"""Represent integrated flowpath as flowthrough engine."""
ENGINE_MODE_FLOWTHROUGH_NEG = _vsp_g.ENGINE_MODE_FLOWTHROUGH_NEG
r"""Represent integrated flowpath as flowthrough engine with negative flowpath."""
ENGINE_MODE_FLOWTHROUGH_NEG_ONLY = _vsp_g.ENGINE_MODE_FLOWTHROUGH_NEG_ONLY
r"""Represent ONLY the integrated flowpath as flowthrough engine with negative flowpath."""
ENGINE_MODE_TO_LIP = _vsp_g.ENGINE_MODE_TO_LIP
r"""Represent integrated flowpath to the lip."""
ENGINE_MODE_TO_FACE = _vsp_g.ENGINE_MODE_TO_FACE
r"""Represent integrated flowpath to the face."""
ENGINE_MODE_TO_FACE_NEG = _vsp_g.ENGINE_MODE_TO_FACE_NEG
r"""Represent integrated flowpath to the face with negative flowpath to the face."""
ENGINE_MODE_TO_FACE_NEG_ONLY = _vsp_g.ENGINE_MODE_TO_FACE_NEG_ONLY
r"""Represent ONLY the integrated flowpath to the face with negative flowpath to the face."""
ENGINE_MODE_EXTEND = _vsp_g.ENGINE_MODE_EXTEND
r"""Represent integrated flowpath with farfield extensions."""
ENGINE_MODE_NUM_TYPES = _vsp_g.ENGINE_MODE_NUM_TYPES
r"""Number of integrated flowpath representations."""
VSP_UNKNOWN = _vsp_g.VSP_UNKNOWN
r"""Unknown error"""
VSP_OK = _vsp_g.VSP_OK
r"""No error"""
VSP_INVALID_PTR = _vsp_g.VSP_INVALID_PTR
r"""Invalid pointer error"""
VSP_INVALID_TYPE = _vsp_g.VSP_INVALID_TYPE
r"""Invalid type error"""
VSP_CANT_FIND_TYPE = _vsp_g.VSP_CANT_FIND_TYPE
r"""Can't find type error"""
VSP_CANT_FIND_PARM = _vsp_g.VSP_CANT_FIND_PARM
r"""Can't find parm error"""
VSP_CANT_FIND_NAME = _vsp_g.VSP_CANT_FIND_NAME
r"""Can't find name error"""
VSP_INVALID_GEOM_ID = _vsp_g.VSP_INVALID_GEOM_ID
r"""Invalid Geom ID error"""
VSP_FILE_DOES_NOT_EXIST = _vsp_g.VSP_FILE_DOES_NOT_EXIST
r"""File does not exist error"""
VSP_FILE_WRITE_FAILURE = _vsp_g.VSP_FILE_WRITE_FAILURE
r"""File write failure error"""
VSP_FILE_READ_FAILURE = _vsp_g.VSP_FILE_READ_FAILURE
r"""File read failure error"""
VSP_WRONG_GEOM_TYPE = _vsp_g.VSP_WRONG_GEOM_TYPE
r"""Wrong Geom type error"""
VSP_WRONG_XSEC_TYPE = _vsp_g.VSP_WRONG_XSEC_TYPE
r"""Wrong XSec type error"""
VSP_WRONG_FILE_TYPE = _vsp_g.VSP_WRONG_FILE_TYPE
r"""Wrong file type error"""
VSP_INDEX_OUT_RANGE = _vsp_g.VSP_INDEX_OUT_RANGE
r"""Index out of range error"""
VSP_INVALID_XSEC_ID = _vsp_g.VSP_INVALID_XSEC_ID
r"""Invalid XSec ID error"""
VSP_INVALID_ID = _vsp_g.VSP_INVALID_ID
r"""Invalid ID error"""
VSP_CANT_SET_NOT_EQ_PARM = _vsp_g.VSP_CANT_SET_NOT_EQ_PARM
r"""Can't set NotEqParm error"""
VSP_AMBIGUOUS_SUBSURF = _vsp_g.VSP_AMBIGUOUS_SUBSURF
r"""Ambiguous flow-through sub-surface error"""
VSP_INVALID_VARPRESET_SETNAME = _vsp_g.VSP_INVALID_VARPRESET_SETNAME
r"""Invalid Variable Preset set name error"""
VSP_INVALID_VARPRESET_GROUPNAME = _vsp_g.VSP_INVALID_VARPRESET_GROUPNAME
r"""Invalid Variable Preset group name error"""
VSP_CONFORMAL_PARENT_UNSUPPORTED = _vsp_g.VSP_CONFORMAL_PARENT_UNSUPPORTED
r"""Unsupported Conformal Geom parent error"""
VSP_UNEXPECTED_RESET_REMAP_ID = _vsp_g.VSP_UNEXPECTED_RESET_REMAP_ID
r"""Unexpected reset remap ID error"""
VSP_INVALID_INPUT_VAL = _vsp_g.VSP_INVALID_INPUT_VAL
r"""Invalid input value error"""
VSP_INVALID_CF_EQN = _vsp_g.VSP_INVALID_CF_EQN
r"""Invalid friction coefficient equation error"""
VSP_INVALID_DRIVERS = _vsp_g.VSP_INVALID_DRIVERS
r"""Invalid drivers for driver group"""
VSP_ADV_LINK_BUILD_FAIL = _vsp_g.VSP_ADV_LINK_BUILD_FAIL
r"""Advanced link build failure"""
VSP_DEPRECATED = _vsp_g.VSP_DEPRECATED
r"""This capability has been deprecated and is not longer supported"""
VSP_LINK_LOOP_DETECTED = _vsp_g.VSP_LINK_LOOP_DETECTED
r"""A parameter link loop was detected and stopped"""
VSP_LINK_OUTPUT_NOT_ASSIGNED = _vsp_g.VSP_LINK_OUTPUT_NOT_ASSIGNED
r"""An output of a parameter link was not set"""
VSP_DUPLICATE_NAME = _vsp_g.VSP_DUPLICATE_NAME
r"""A duplicate name has been provided"""
VSP_GUI_DEVICE_DEACTIVATED = _vsp_g.VSP_GUI_DEVICE_DEACTIVATED
r"""A deactivated GUI device was touched"""
VSP_COULD_NOT_CREATE_BACKGROUND3D = _vsp_g.VSP_COULD_NOT_CREATE_BACKGROUND3D
r"""Could not create and add Background3D"""
VSP_NUM_ERROR_CODE = _vsp_g.VSP_NUM_ERROR_CODE
r"""Total number of VSP error codes"""
EXCRESCENCE_COUNT = _vsp_g.EXCRESCENCE_COUNT
r"""Drag counts excressence type"""
EXCRESCENCE_CD = _vsp_g.EXCRESCENCE_CD
r"""Drag coefficient excressence type"""
EXCRESCENCE_PERCENT_GEOM = _vsp_g.EXCRESCENCE_PERCENT_GEOM
r"""Percent of parent Geom drag coefficient excressence type"""
EXCRESCENCE_MARGIN = _vsp_g.EXCRESCENCE_MARGIN
r"""Percent margin excressence type"""
EXCRESCENCE_DRAGAREA = _vsp_g.EXCRESCENCE_DRAGAREA
r"""Drag area (D/q) excressence type"""
EXPORT_FELISA = _vsp_g.EXPORT_FELISA
r"""FELISA export type (NOT IMPLEMENTED)"""
EXPORT_XSEC = _vsp_g.EXPORT_XSEC
r"""XSec (\*.hrm) export type"""
EXPORT_STL = _vsp_g.EXPORT_STL
r"""Stereolith (\*.stl) export type"""
EXPORT_AWAVE = _vsp_g.EXPORT_AWAVE
r"""AWAVE export type (NOT IMPLEMENTED)"""
EXPORT_NASCART = _vsp_g.EXPORT_NASCART
r"""NASCART (\*.dat) export type"""
EXPORT_POVRAY = _vsp_g.EXPORT_POVRAY
r"""POVRAY (\*.pov) export type"""
EXPORT_CART3D = _vsp_g.EXPORT_CART3D
r"""Cart3D (\*.tri) export type"""
EXPORT_VSPGEOM = _vsp_g.EXPORT_VSPGEOM
r"""VSPGeom (\*.vspgeom) export type"""
EXPORT_VORXSEC = _vsp_g.EXPORT_VORXSEC
r"""VORXSEC  export type (NOT IMPLEMENTED)"""
EXPORT_XSECGEOM = _vsp_g.EXPORT_XSECGEOM
r"""XSECGEOM export type (NOT IMPLEMENTED)"""
EXPORT_GMSH = _vsp_g.EXPORT_GMSH
r"""Gmsh (\*.msh) export type"""
EXPORT_X3D = _vsp_g.EXPORT_X3D
r"""X3D (\*.x3d) export type"""
EXPORT_STEP = _vsp_g.EXPORT_STEP
r"""STEP (\*.stp) export type"""
EXPORT_PLOT3D = _vsp_g.EXPORT_PLOT3D
r"""PLOT3D (\*.p3d) export type"""
EXPORT_IGES = _vsp_g.EXPORT_IGES
r"""IGES (\*.igs) export type"""
EXPORT_BEM = _vsp_g.EXPORT_BEM
r"""Blade Element (\*.bem) export type"""
EXPORT_DXF = _vsp_g.EXPORT_DXF
r"""AutoCAD (\*.dxf) export type"""
EXPORT_FACET = _vsp_g.EXPORT_FACET
r"""Xpatch (\*.facet) export type"""
EXPORT_SVG = _vsp_g.EXPORT_SVG
r"""SVG (\*.svg) export type"""
EXPORT_PMARC = _vsp_g.EXPORT_PMARC
r"""PMARC 12 (\*.pmin) export type"""
EXPORT_OBJ = _vsp_g.EXPORT_OBJ
r"""OBJ (\*.obj) export type"""
EXPORT_SELIG_AIRFOIL = _vsp_g.EXPORT_SELIG_AIRFOIL
r"""Airfoil points (\*.dat) export type"""
EXPORT_BEZIER_AIRFOIL = _vsp_g.EXPORT_BEZIER_AIRFOIL
r"""Airfoil curves (\*.bz) export type"""
EXPORT_IGES_STRUCTURE = _vsp_g.EXPORT_IGES_STRUCTURE
r"""IGES structure (\*.igs) export type"""
EXPORT_STEP_STRUCTURE = _vsp_g.EXPORT_STEP_STRUCTURE
r"""STEP structure (\*.stp) export type"""
FEA_BCM_USER = _vsp_g.FEA_BCM_USER
r"""FEA boundary condition constraints user defined."""
FEA_BCM_ALL = _vsp_g.FEA_BCM_ALL
r"""FEA boundary condition constrains all DOF."""
FEA_BCM_PIN = _vsp_g.FEA_BCM_PIN
r"""FEA boundary condition pin constraints."""
FEA_BCM_SYMM = _vsp_g.FEA_BCM_SYMM
r"""FEA boundary condition symmetrical constraints."""
FEA_BCM_ASYMM = _vsp_g.FEA_BCM_ASYMM
r"""FEA boundary condition antisymmetrical constraints."""
FEA_NUM_BCM_MODES = _vsp_g.FEA_NUM_BCM_MODES
r"""Number of FEA boundary condition constraint types."""
FEA_BC_STRUCTURE = _vsp_g.FEA_BC_STRUCTURE
r"""FEA boundary condition assigned to structure."""
FEA_BC_PART = _vsp_g.FEA_BC_PART
r"""FEA boundary condition assigned to part."""
FEA_BC_SUBSURF = _vsp_g.FEA_BC_SUBSURF
r"""FEA boundary condition assigned to subsurface."""
FEA_NUM_BC_TYPES = _vsp_g.FEA_NUM_BC_TYPES
r"""Number of FEA boundary condition definition types."""
FEA_XSEC_GENERAL = _vsp_g.FEA_XSEC_GENERAL
r"""General XSec type"""
FEA_XSEC_CIRC = _vsp_g.FEA_XSEC_CIRC
r"""Circle XSec type"""
FEA_XSEC_PIPE = _vsp_g.FEA_XSEC_PIPE
r"""Pipe XSec type"""
FEA_XSEC_I = _vsp_g.FEA_XSEC_I
r"""I XSec type"""
FEA_XSEC_RECT = _vsp_g.FEA_XSEC_RECT
r"""Rectangle XSec type"""
FEA_XSEC_BOX = _vsp_g.FEA_XSEC_BOX
r"""Box XSec type"""
FEA_MASS_FILE_NAME = _vsp_g.FEA_MASS_FILE_NAME
r"""FEA Mesh mass export type"""
FEA_NASTRAN_FILE_NAME = _vsp_g.FEA_NASTRAN_FILE_NAME
r"""FEA Mesh NASTRAN export type"""
FEA_NKEY_FILE_NAME = _vsp_g.FEA_NKEY_FILE_NAME
r"""FEA Mesh NKey export type"""
FEA_CALCULIX_FILE_NAME = _vsp_g.FEA_CALCULIX_FILE_NAME
r"""FEA Mesh Calculix export type"""
FEA_STL_FILE_NAME = _vsp_g.FEA_STL_FILE_NAME
r"""FEA Mesh STL export type"""
FEA_GMSH_FILE_NAME = _vsp_g.FEA_GMSH_FILE_NAME
r"""FEA Mesh GMSH export type"""
FEA_SRF_FILE_NAME = _vsp_g.FEA_SRF_FILE_NAME
r"""FEA Mesh SRF export type"""
FEA_CURV_FILE_NAME = _vsp_g.FEA_CURV_FILE_NAME
r"""FEA Mesh CURV export type"""
FEA_PLOT3D_FILE_NAME = _vsp_g.FEA_PLOT3D_FILE_NAME
r"""FEA Mesh PLOT3D export type"""
FEA_IGES_FILE_NAME = _vsp_g.FEA_IGES_FILE_NAME
r"""FEA Mesh trimmed IGES export type"""
FEA_STEP_FILE_NAME = _vsp_g.FEA_STEP_FILE_NAME
r"""FEA Mesh trimmed STEP export type"""
FEA_NUM_FILE_NAMES = _vsp_g.FEA_NUM_FILE_NAMES
r"""Number of FEA Mesh export type."""
FEA_FIX_PT_ON_BODY = _vsp_g.FEA_FIX_PT_ON_BODY
r"""On body fixed point type"""
FEA_FIX_PT_GLOBAL_XYZ = _vsp_g.FEA_FIX_PT_GLOBAL_XYZ
r"""Global XYZ off body fixed point type"""
FEA_FIX_PT_DELTA_XYZ = _vsp_g.FEA_FIX_PT_DELTA_XYZ
r"""Delta XYZ off body fixed point type"""
FEA_FIX_PT_DELTA_UVN = _vsp_g.FEA_FIX_PT_DELTA_UVN
r"""Delta UVN off body fixed point type"""
FEA_FIX_PT_GEOM_ORIGIN = _vsp_g.FEA_FIX_PT_GEOM_ORIGIN
r"""Geom origin off body fixed point type"""
FEA_FIX_PT_GEOM_CG = _vsp_g.FEA_FIX_PT_GEOM_CG
r"""Geom CG off body fixed point type"""
FEA_NUM_FIX_PT_TYPES = _vsp_g.FEA_NUM_FIX_PT_TYPES
r"""Number of off body fixed point types"""
FEA_ISOTROPIC = _vsp_g.FEA_ISOTROPIC
r"""Isotropic material"""
FEA_ENG_ORTHO = _vsp_g.FEA_ENG_ORTHO
r"""Orthotropic material in engineering parameters"""
FEA_ENG_ORTHO_TRANS_ISO = _vsp_g.FEA_ENG_ORTHO_TRANS_ISO
r"""Orthotropic material with transverse isotropy assumed in engineering parameters"""
FEA_LAMINATE = _vsp_g.FEA_LAMINATE
r"""Laminate buildup material"""
FEA_NUM_MAT_TYPES = _vsp_g.FEA_NUM_MAT_TYPES
r"""Number of FEA material types"""
FEA_ORIENT_GLOBAL_X = _vsp_g.FEA_ORIENT_GLOBAL_X
r"""FEA Global X material orientation"""
FEA_ORIENT_GLOBAL_Y = _vsp_g.FEA_ORIENT_GLOBAL_Y
r"""FEA Global Y material orientation"""
FEA_ORIENT_GLOBAL_Z = _vsp_g.FEA_ORIENT_GLOBAL_Z
r"""FEA Global Z material orientation"""
FEA_ORIENT_COMP_X = _vsp_g.FEA_ORIENT_COMP_X
r"""FEA Comp X material orientation"""
FEA_ORIENT_COMP_Y = _vsp_g.FEA_ORIENT_COMP_Y
r"""FEA Comp Y material orientation"""
FEA_ORIENT_COMP_Z = _vsp_g.FEA_ORIENT_COMP_Z
r"""FEA Comp Z material orientation"""
FEA_ORIENT_PART_U = _vsp_g.FEA_ORIENT_PART_U
r"""FEA Part U material orientation"""
FEA_ORIENT_PART_V = _vsp_g.FEA_ORIENT_PART_V
r"""FEA Part V material orientation"""
FEA_ORIENT_OML_U = _vsp_g.FEA_ORIENT_OML_U
r"""FEA OML U material orientation"""
FEA_ORIENT_OML_V = _vsp_g.FEA_ORIENT_OML_V
r"""FEA OML V material orientation"""
FEA_ORIENT_OML_R = _vsp_g.FEA_ORIENT_OML_R
r"""FEA OML R material orientation"""
FEA_ORIENT_OML_S = _vsp_g.FEA_ORIENT_OML_S
r"""FEA OML S material orientation"""
FEA_ORIENT_OML_T = _vsp_g.FEA_ORIENT_OML_T
r"""FEA OML T material orientation"""
FEA_NUM_ORIENT_TYPES = _vsp_g.FEA_NUM_ORIENT_TYPES
r"""Number of FEA material orientation types"""
FEA_DEPRECATED = _vsp_g.FEA_DEPRECATED
r"""Flag for deprecated element type option"""
FEA_SHELL = _vsp_g.FEA_SHELL
r"""Shell (tris) FEA element type"""
FEA_BEAM = _vsp_g.FEA_BEAM
r"""Beam FEA element type"""
FEA_SHELL_AND_BEAM = _vsp_g.FEA_SHELL_AND_BEAM
r"""Both Shell and Beam FEA element types"""
FEA_NO_ELEMENTS = _vsp_g.FEA_NO_ELEMENTS
r"""FEA part with no elements"""
FEA_NUM_ELEMENT_TYPES = _vsp_g.FEA_NUM_ELEMENT_TYPES
r"""Number of FEA element type choices"""
FEA_SLICE = _vsp_g.FEA_SLICE
r"""Slice FEA Part type"""
FEA_RIB = _vsp_g.FEA_RIB
r"""Rib FEA Part type"""
FEA_SPAR = _vsp_g.FEA_SPAR
r"""Spar FEA Part type"""
FEA_FIX_POINT = _vsp_g.FEA_FIX_POINT
r"""Fixed Point FEA Part type"""
FEA_DOME = _vsp_g.FEA_DOME
r"""Dome FEA Part type"""
FEA_RIB_ARRAY = _vsp_g.FEA_RIB_ARRAY
r"""Rib array FEA Part type"""
FEA_SLICE_ARRAY = _vsp_g.FEA_SLICE_ARRAY
r"""Slice array FEA Part type"""
FEA_SKIN = _vsp_g.FEA_SKIN
r"""Skin FEA Part type"""
FEA_TRIM = _vsp_g.FEA_TRIM
r"""Trim FEA Part type"""
FEA_POLY_SPAR = _vsp_g.FEA_POLY_SPAR
r"""Poly Spar FEA Part type"""
FEA_NUM_TYPES = _vsp_g.FEA_NUM_TYPES
r"""Number of FEA Part types"""
NO_NORMAL = _vsp_g.NO_NORMAL
r"""FEA Rib or Rib Array has no set perpendicular edge"""
LE_NORMAL = _vsp_g.LE_NORMAL
r"""FEA Rib or Rib Array is set perpendicular to the leading edge"""
TE_NORMAL = _vsp_g.TE_NORMAL
r"""FEA Rib or Rib Array is set perpendicular to the trailing edge"""
SPAR_NORMAL = _vsp_g.SPAR_NORMAL
r"""FEA Rib or Rib Array is set perpendicular to an FEA Spar"""
FEA_KEEP = _vsp_g.FEA_KEEP
r"""Keep shell elements"""
FEA_DELETE = _vsp_g.FEA_DELETE
r"""Delete shell elements"""
FEA_NUM_SHELL_TREATMENT_TYPES = _vsp_g.FEA_NUM_SHELL_TREATMENT_TYPES
r"""Number of FEA subsurface treatment choices"""
XY_BODY = _vsp_g.XY_BODY
r"""Slice is parallel to parent Geom body XY plane"""
YZ_BODY = _vsp_g.YZ_BODY
r"""Slice is parallel to parent Geom body YZ plane"""
XZ_BODY = _vsp_g.XZ_BODY
r"""Slice is parallel to parent Geom body XZ plane"""
XY_ABS = _vsp_g.XY_ABS
r"""Slice is parallel to absolute XY plane"""
YZ_ABS = _vsp_g.YZ_ABS
r"""Slice is parallel to absolute YZ plane"""
XZ_ABS = _vsp_g.XZ_ABS
r"""Slice is parallel to absolute XZ plane"""
SPINE_NORMAL = _vsp_g.SPINE_NORMAL
r"""Slice is perpendicular to thespine of the parent Geom"""
POLY_SPAR_POINT_U01 = _vsp_g.POLY_SPAR_POINT_U01
r"""Spar points span specified in U01"""
POLY_SPAR_POINT_U0N = _vsp_g.POLY_SPAR_POINT_U0N
r"""Spar points span specified in U0N"""
POLY_SPAR_POINT_ETA = _vsp_g.POLY_SPAR_POINT_ETA
r"""Spar points span specified in eta"""
NUM_POLY_SPAR_POINT_TYPES = _vsp_g.NUM_POLY_SPAR_POINT_TYPES
r"""Number of poly spar point types"""
SI_UNIT = _vsp_g.SI_UNIT
r"""FEA Files output in (m, kg)"""
CGS_UNIT = _vsp_g.CGS_UNIT
r"""FEA Files output in (cm, g)"""
MPA_UNIT = _vsp_g.MPA_UNIT
r"""FEA Files output in (mm, tonne)"""
BFT_UNIT = _vsp_g.BFT_UNIT
r"""FEA Files output in (ft, slug)"""
BIN_UNIT = _vsp_g.BIN_UNIT
r"""FEA Files output in (in, lbf*sec^2/in)"""
FF_B_MANUAL = _vsp_g.FF_B_MANUAL
r"""Manual FF equation"""
FF_B_SCHEMENSKY_FUSE = _vsp_g.FF_B_SCHEMENSKY_FUSE
r"""Schemensky Fuselage FF equation"""
FF_B_SCHEMENSKY_NACELLE = _vsp_g.FF_B_SCHEMENSKY_NACELLE
r"""Schemensky Nacelle FF equation"""
FF_B_HOERNER_STREAMBODY = _vsp_g.FF_B_HOERNER_STREAMBODY
r"""Hoerner Streamlined Body FF equation"""
FF_B_TORENBEEK = _vsp_g.FF_B_TORENBEEK
r"""Torenbeek FF equation"""
FF_B_SHEVELL = _vsp_g.FF_B_SHEVELL
r"""Shevell FF equation"""
FF_B_COVERT = _vsp_g.FF_B_COVERT
r"""Covert FF equation"""
FF_B_JENKINSON_FUSE = _vsp_g.FF_B_JENKINSON_FUSE
r"""Jenkinson Fuselage FF equation"""
FF_B_JENKINSON_WING_NACELLE = _vsp_g.FF_B_JENKINSON_WING_NACELLE
r"""Jenkinson Wing Nacelle FF equation"""
FF_B_JENKINSON_AFT_FUSE_NACELLE = _vsp_g.FF_B_JENKINSON_AFT_FUSE_NACELLE
r"""Jenkinson Aft Fuselage Nacelle FF equation"""
FF_W_MANUAL = _vsp_g.FF_W_MANUAL
r"""Manual FF equation"""
FF_W_EDET_CONV = _vsp_g.FF_W_EDET_CONV
r"""EDET Conventional Airfoil FF equation"""
FF_W_EDET_ADV = _vsp_g.FF_W_EDET_ADV
r"""EDET Advanced Airfoil FF equation"""
FF_W_HOERNER = _vsp_g.FF_W_HOERNER
r"""Hoerner FF equation"""
FF_W_COVERT = _vsp_g.FF_W_COVERT
r"""Covert FF equation"""
FF_W_SHEVELL = _vsp_g.FF_W_SHEVELL
r"""Shevell FF equation"""
FF_W_KROO = _vsp_g.FF_W_KROO
r"""Kroo FF equation"""
FF_W_TORENBEEK = _vsp_g.FF_W_TORENBEEK
r"""Torenbeek FF equation"""
FF_W_DATCOM = _vsp_g.FF_W_DATCOM
r"""DATCOM FF equation"""
FF_W_SCHEMENSKY_6_SERIES_AF = _vsp_g.FF_W_SCHEMENSKY_6_SERIES_AF
r"""Schemensky 6 Series Airfoil FF equation"""
FF_W_SCHEMENSKY_4_SERIES_AF = _vsp_g.FF_W_SCHEMENSKY_4_SERIES_AF
r"""Schemensky 4 Series Airfoil FF equation"""
FF_W_JENKINSON_WING = _vsp_g.FF_W_JENKINSON_WING
r"""Jenkinson Wing FF equation"""
FF_W_JENKINSON_TAIL = _vsp_g.FF_W_JENKINSON_TAIL
r"""Jenkinson Tail FF equation"""
FF_W_SCHEMENSKY_SUPERCRITICAL_AF = _vsp_g.FF_W_SCHEMENSKY_SUPERCRITICAL_AF
r"""Schemensky Supercritical Airfoil FF equation"""
ONE_THIRD_ROTOR_FRAGMENT = _vsp_g.ONE_THIRD_ROTOR_FRAGMENT
r"""One third rotor fragment"""
INTERMEDIATE_FRAGMENT = _vsp_g.INTERMEDIATE_FRAGMENT
r"""Intermediate rotor fragment"""
ALTERNATE_FRAGMENT = _vsp_g.ALTERNATE_FRAGMENT
r"""Alternate rotor fragment model"""
FAN_FRAGMENT = _vsp_g.FAN_FRAGMENT
r"""Fan blade fragment"""
SMALL_FRAGMENT = _vsp_g.SMALL_FRAGMENT
r"""Small fragment"""
GENERIC_FRAGMENT = _vsp_g.GENERIC_FRAGMENT
r"""Generic fragment"""
NUM_FRAGMENT_MODES = _vsp_g.NUM_FRAGMENT_MODES
r"""Number of auxiliary geom modes."""
PD_UNITS_IMPERIAL = _vsp_g.PD_UNITS_IMPERIAL
r"""Imperial unit system"""
PD_UNITS_METRIC = _vsp_g.PD_UNITS_METRIC
r"""Metric unit system"""
OPEN = _vsp_g.OPEN
r"""Browse files that already exist"""
SAVE = _vsp_g.SAVE
r"""Browse file system and enter file name"""
NUM_FILE_CHOOSER_MODES = _vsp_g.NUM_FILE_CHOOSER_MODES
r"""Number of file chooser modes"""
FC_OPENVSP = _vsp_g.FC_OPENVSP
r"""OpenVSP's own file chooser with directory preferences."""
FC_NATIVE = _vsp_g.FC_NATIVE
r"""Operating system's native file chooser"""
NUM_FILE_CHOOSER_TYPES = _vsp_g.NUM_FILE_CHOOSER_TYPES
r"""Number of file chooser types"""
GDEV_TAB = _vsp_g.GDEV_TAB
r"""Custom GUI Tab"""
GDEV_SCROLL_TAB = _vsp_g.GDEV_SCROLL_TAB
r"""Custom GUI Fl_Scroll and Tab"""
GDEV_GROUP = _vsp_g.GDEV_GROUP
r"""Custom GUI Group"""
GDEV_PARM_BUTTON = _vsp_g.GDEV_PARM_BUTTON
r"""Custom GUI ParmButton"""
GDEV_INPUT = _vsp_g.GDEV_INPUT
r"""Custom GUI Input"""
GDEV_OUTPUT = _vsp_g.GDEV_OUTPUT
r"""Custom GUI Output"""
GDEV_SLIDER = _vsp_g.GDEV_SLIDER
r"""Custom GUI Slider"""
GDEV_SLIDER_ADJ_RANGE = _vsp_g.GDEV_SLIDER_ADJ_RANGE
r"""Custom GUI SliderAdjRangeInput"""
GDEV_CHECK_BUTTON = _vsp_g.GDEV_CHECK_BUTTON
r"""Custom GUI CheckButton"""
GDEV_CHECK_BUTTON_BIT = _vsp_g.GDEV_CHECK_BUTTON_BIT
r"""Custom GUI CheckButtonBit"""
GDEV_RADIO_BUTTON = _vsp_g.GDEV_RADIO_BUTTON
r"""Custom GUI RadioButton"""
GDEV_TOGGLE_BUTTON = _vsp_g.GDEV_TOGGLE_BUTTON
r"""Custom GUI ToggleButton"""
GDEV_TOGGLE_BUTTON_FREE = _vsp_g.GDEV_TOGGLE_BUTTON_FREE
r"""Custom GUI ToggleButton without Parm"""
GDEV_TOGGLE_RADIO_GROUP = _vsp_g.GDEV_TOGGLE_RADIO_GROUP
r"""Custom GUI ToggleRadioGroup (NOT IMPLEMENTED)"""
GDEV_TRIGGER_BUTTON = _vsp_g.GDEV_TRIGGER_BUTTON
r"""Custom GUI TriggerButton"""
GDEV_COUNTER = _vsp_g.GDEV_COUNTER
r"""Custom GUI Counter"""
GDEV_CHOICE = _vsp_g.GDEV_CHOICE
r"""Custom GUI Choice"""
GDEV_ADD_CHOICE_ITEM = _vsp_g.GDEV_ADD_CHOICE_ITEM
r"""Add item to custom GUI Choice"""
GDEV_SLIDER_INPUT = _vsp_g.GDEV_SLIDER_INPUT
r"""Custom GUI SliderInput"""
GDEV_SLIDER_ADJ_RANGE_INPUT = _vsp_g.GDEV_SLIDER_ADJ_RANGE_INPUT
r"""Custom GUI SliderAdjRangeInput"""
GDEV_SLIDER_ADJ_RANGE_TWO_INPUT = _vsp_g.GDEV_SLIDER_ADJ_RANGE_TWO_INPUT
r"""Custom GUI SliderAdjRangeInput with two inputs (NOT IMPLEMENTED)"""
GDEV_FRACT_PARM_SLIDER = _vsp_g.GDEV_FRACT_PARM_SLIDER
r"""Custom GUI FractParmSlider"""
GDEV_STRING_INPUT = _vsp_g.GDEV_STRING_INPUT
r"""Custom GUI StringInput"""
GDEV_INDEX_SELECTOR = _vsp_g.GDEV_INDEX_SELECTOR
r"""Custom GUI IndexSelector"""
GDEV_COLOR_PICKER = _vsp_g.GDEV_COLOR_PICKER
r"""Custom GUI ColorPicker"""
GDEV_YGAP = _vsp_g.GDEV_YGAP
r"""Custom GUI Y gap"""
GDEV_DIVIDER_BOX = _vsp_g.GDEV_DIVIDER_BOX
r"""Custom GUI divider box"""
GDEV_BEGIN_SAME_LINE = _vsp_g.GDEV_BEGIN_SAME_LINE
r"""Set begin same line flag for custom GUI"""
GDEV_END_SAME_LINE = _vsp_g.GDEV_END_SAME_LINE
r"""Set end same line flag for custom GUI"""
GDEV_FORCE_WIDTH = _vsp_g.GDEV_FORCE_WIDTH
r"""Set forced width for custom GUI"""
GDEV_SET_FORMAT = _vsp_g.GDEV_SET_FORMAT
r"""Set format label for custom GUI"""
NUM_GDEV_TYPES = _vsp_g.NUM_GDEV_TYPES
r"""Number of GDEV types"""
ALL_GDEV_TYPES = _vsp_g.ALL_GDEV_TYPES
r"""Flag for all GDEV types"""
GEAR_CONFIGURATION_DOWN = _vsp_g.GEAR_CONFIGURATION_DOWN
r"""Gear drawn down"""
GEAR_CONFIGURATION_UP = _vsp_g.GEAR_CONFIGURATION_UP
r"""Gear drawn up"""
GEAR_CONFIGURATION_UP_AND_DOWN = _vsp_g.GEAR_CONFIGURATION_UP_AND_DOWN
r"""Gear drawn both up and down"""
GEAR_CONFIGURATION_INTERMEDIATE = _vsp_g.GEAR_CONFIGURATION_INTERMEDIATE
r"""Gear drawn somewhere beteween down and up"""
GEAR_CONFIGURATION_ALL = _vsp_g.GEAR_CONFIGURATION_ALL
r"""Gear drawn in all configurations"""
NUM_GEAR_CONFIGURATION_MODES = _vsp_g.NUM_GEAR_CONFIGURATION_MODES
r"""Number of gear configuration choices"""
GEAR_STOWED_POSITION = _vsp_g.GEAR_STOWED_POSITION
r"""Specified by stowed position"""
GEAR_MECHANISM = _vsp_g.GEAR_MECHANISM
r"""Specified by mechanism"""
NUM_GEAR_RETRACT_MODES = _vsp_g.NUM_GEAR_RETRACT_MODES
r"""Number of gear retract choices"""
GEAR_SUSPENSION_NOMINAL = _vsp_g.GEAR_SUSPENSION_NOMINAL
r"""Gear suspension at nominal extension"""
GEAR_SUSPENSION_COMPRESSED = _vsp_g.GEAR_SUSPENSION_COMPRESSED
r"""Gear suspension is compressed"""
GEAR_SUSPENSION_EXTENDED = _vsp_g.GEAR_SUSPENSION_EXTENDED
r"""Gear suspension is extended"""
NUM_GEAR_SUSPENSION_MODES = _vsp_g.NUM_GEAR_SUSPENSION_MODES
r"""Number of gear suspension choices"""
MALE = _vsp_g.MALE
r"""Male Human component"""
FEMALE = _vsp_g.FEMALE
r"""Female Human component"""
EXTERNAL_INTERFERENCE = _vsp_g.EXTERNAL_INTERFERENCE
r"""Interference between mutually external bodies"""
PACKAGING_INTERFERENCE = _vsp_g.PACKAGING_INTERFERENCE
r"""Interference when one body is internal to another"""
EXTERNAL_SELF_INTERFERENCE = _vsp_g.EXTERNAL_SELF_INTERFERENCE
r"""Interference between multiple surfaces of one Geom / Set"""
PLANE_STATIC_DISTANCE_INTERFERENCE = _vsp_g.PLANE_STATIC_DISTANCE_INTERFERENCE
r"""Interference between surfaces and a plane"""
PLANE_2PT_ANGLE_INTERFERENCE = _vsp_g.PLANE_2PT_ANGLE_INTERFERENCE
r"""Interference angle between surfaces and a plane"""
GEAR_CG_TIPBACK_ANALYSIS = _vsp_g.GEAR_CG_TIPBACK_ANALYSIS
r"""Calculate tipback angle"""
PLANE_1PT_ANGLE_INTERFERENCE = _vsp_g.PLANE_1PT_ANGLE_INTERFERENCE
r"""Interference roll angle between surfaces and a plane"""
GEAR_WEIGHT_DISTRIBUTION_ANALYSIS = _vsp_g.GEAR_WEIGHT_DISTRIBUTION_ANALYSIS
r"""Calculate distribution of weight across landing gear"""
GEAR_TIPOVER_ANALYSIS = _vsp_g.GEAR_TIPOVER_ANALYSIS
r"""Calculate tipover angle"""
GEAR_TURN_ANALYSIS = _vsp_g.GEAR_TURN_ANALYSIS
r"""Calculate ground manueveribility"""
VISIBLE_FROM_POINT_ANALYSIS = _vsp_g.VISIBLE_FROM_POINT_ANALYSIS
r"""Calculate az,el domain visible from a point"""
CCE_INTERFERENCE = _vsp_g.CCE_INTERFERENCE
r"""Interference with composite clearance envelope"""
LINEAR_SWEPT_VOLUME_ANALYSIS = _vsp_g.LINEAR_SWEPT_VOLUME_ANALYSIS
r"""Interference with linear swept volume"""
VISIBLE_AT_SURF_ANALYSIS = _vsp_g.VISIBLE_AT_SURF_ANALYSIS
r"""Calculate visibility of a surface from a direction"""
RISK_ANGLE = _vsp_g.RISK_ANGLE
r"""Calculate risk angle for thrown debris"""
COMP_GEOM = _vsp_g.COMP_GEOM
r"""Calculate wetted area and volume"""
PLANAR_SLICE = _vsp_g.PLANAR_SLICE
r"""Calculate planar slices and area distribution"""
PROJ_AREA = _vsp_g.PROJ_AREA
r"""Calculate projected area"""
MASS_PROP = _vsp_g.MASS_PROP
r"""Calculate mass properties"""
AERO_CENTER = _vsp_g.AERO_CENTER
r"""Calculate aero center of single lifting surface"""
NUM_INTERFERENCE_TYPES = _vsp_g.NUM_INTERFERENCE_TYPES
r"""Number of interference check types"""
POD_GEOM_SCREEN = _vsp_g.POD_GEOM_SCREEN
r"""Pod geom screen"""
FUSELAGE_GEOM_SCREEN = _vsp_g.FUSELAGE_GEOM_SCREEN
r"""Fuselage geom screen"""
MS_WING_GEOM_SCREEN = _vsp_g.MS_WING_GEOM_SCREEN
r"""Wing geom screen"""
BLANK_GEOM_SCREEN = _vsp_g.BLANK_GEOM_SCREEN
r"""Blank geom screen"""
MESH_GEOM_SCREEN = _vsp_g.MESH_GEOM_SCREEN
r"""Mesh geom screen"""
NGON_MESH_GEOM_SCREEN = _vsp_g.NGON_MESH_GEOM_SCREEN
r"""NGon Mesh geom screen"""
STACK_GEOM_SCREEN = _vsp_g.STACK_GEOM_SCREEN
r"""Stack geom screen"""
CUSTOM_GEOM_SCREEN = _vsp_g.CUSTOM_GEOM_SCREEN
r"""Custom geom screen"""
PT_CLOUD_GEOM_SCREEN = _vsp_g.PT_CLOUD_GEOM_SCREEN
r"""Point cloud geom screen"""
PROP_GEOM_SCREEN = _vsp_g.PROP_GEOM_SCREEN
r"""Propeller geom screen"""
HINGE_GEOM_SCREEN = _vsp_g.HINGE_GEOM_SCREEN
r"""Hinge geom screen"""
MULT_GEOM_SCREEN = _vsp_g.MULT_GEOM_SCREEN
r"""Multiple geom screen"""
CONFORMAL_SCREEN = _vsp_g.CONFORMAL_SCREEN
r"""Conformal geom screen"""
ELLIPSOID_GEOM_SCREEN = _vsp_g.ELLIPSOID_GEOM_SCREEN
r"""Ellipsoid geom screen"""
BOR_GEOM_SCREEN = _vsp_g.BOR_GEOM_SCREEN
r"""Body of revolution geom screen"""
WIRE_FRAME_GEOM_SCREEN = _vsp_g.WIRE_FRAME_GEOM_SCREEN
r"""Wireframe geom screen"""
HUMAN_GEOM_SCREEN = _vsp_g.HUMAN_GEOM_SCREEN
r"""Human geom screen"""
ROUTING_GEOM_SCREEN = _vsp_g.ROUTING_GEOM_SCREEN
r"""Routing geom screen"""
AUXILIARY_GEOM_SCREEN = _vsp_g.AUXILIARY_GEOM_SCREEN
r"""Auxiliary geom screen"""
GEAR_GEOM_SCREEN = _vsp_g.GEAR_GEOM_SCREEN
r"""Gear geom screen"""
COBRA_GEOM_SCREEN = _vsp_g.COBRA_GEOM_SCREEN
r"""Cobra body geom screen"""
NUM_GEOM_SCREENS = _vsp_g.NUM_GEOM_SCREENS
r"""Number of geom screens"""
ALL_GEOM_SCREENS = _vsp_g.ALL_GEOM_SCREENS
r"""All geom screens"""
VSP_ADV_LINK_SCREEN = _vsp_g.VSP_ADV_LINK_SCREEN
r"""Advanced linking screen"""
VSP_ADV_LINK_VAR_RENAME_SCREEN = _vsp_g.VSP_ADV_LINK_VAR_RENAME_SCREEN
r"""Advanced link variable rename screen"""
VSP_AERO_STRUCT_SCREEN = _vsp_g.VSP_AERO_STRUCT_SCREEN
r"""Aero / structural analysis screen"""
VSP_AIRFOIL_CURVES_EXPORT_SCREEN = _vsp_g.VSP_AIRFOIL_CURVES_EXPORT_SCREEN
r"""Airfoil curves export screen"""
VSP_AIRFOIL_POINTS_EXPORT_SCREEN = _vsp_g.VSP_AIRFOIL_POINTS_EXPORT_SCREEN
r"""Airfoil points screen"""
VSP_ATTRIBUTE_EXPLORER_SCREEN = _vsp_g.VSP_ATTRIBUTE_EXPLORER_SCREEN
r"""Attribute details screen"""
VSP_BACKGROUND_SCREEN = _vsp_g.VSP_BACKGROUND_SCREEN
r"""Background control screen"""
VSP_BACKGROUND3D_SCREEN = _vsp_g.VSP_BACKGROUND3D_SCREEN
r"""Background3D control screen"""
VSP_BACKGROUND3D_PREVIEW_SCREEN = _vsp_g.VSP_BACKGROUND3D_PREVIEW_SCREEN
r"""Background3D preview screen"""
VSP_BEM_OPTIONS_SCREEN = _vsp_g.VSP_BEM_OPTIONS_SCREEN
r"""Blade element method options screen"""
VSP_CFD_MESH_SCREEN = _vsp_g.VSP_CFD_MESH_SCREEN
r"""CFD Mesh screen"""
VSP_CLIPPING_SCREEN = _vsp_g.VSP_CLIPPING_SCREEN
r"""Clipping screen"""
VSP_COMP_GEOM_SCREEN = _vsp_g.VSP_COMP_GEOM_SCREEN
r"""CompGeom screen"""
VSP_COR_SCREEN = _vsp_g.VSP_COR_SCREEN
r"""Center of rotation screen"""
VSP_CURVE_EDIT_SCREEN = _vsp_g.VSP_CURVE_EDIT_SCREEN
r"""Curve edit screen"""
VSP_DEGEN_GEOM_SCREEN = _vsp_g.VSP_DEGEN_GEOM_SCREEN
r"""Degen geom screen"""
VSP_DESIGN_VAR_SCREEN = _vsp_g.VSP_DESIGN_VAR_SCREEN
r"""Design variables screen"""
VSP_DXF_OPTIONS_SCREEN = _vsp_g.VSP_DXF_OPTIONS_SCREEN
r"""DXF options screen"""
VSP_EXPORT_SCREEN = _vsp_g.VSP_EXPORT_SCREEN
r"""Export screen"""
VSP_FEA_PART_EDIT_SCREEN = _vsp_g.VSP_FEA_PART_EDIT_SCREEN
r"""FEA Part edit screen"""
VSP_FEA_XSEC_SCREEN = _vsp_g.VSP_FEA_XSEC_SCREEN
r"""FEA XSec screen"""
VSP_FIT_MODEL_SCREEN = _vsp_g.VSP_FIT_MODEL_SCREEN
r"""Fit model screen"""
VSP_IGES_OPTIONS_SCREEN = _vsp_g.VSP_IGES_OPTIONS_SCREEN
r"""IGES options screen"""
VSP_IGES_STRUCTURE_OPTIONS_SCREEN = _vsp_g.VSP_IGES_STRUCTURE_OPTIONS_SCREEN
r"""IGES structure options screen"""
VSP_EXPORT_CUSTOM_SCRIPT = _vsp_g.VSP_EXPORT_CUSTOM_SCRIPT
r"""Custom geom export screen"""
VSP_GEOMETRY_ANALYSIS_SCREEN = _vsp_g.VSP_GEOMETRY_ANALYSIS_SCREEN
r"""Geometry analysis screen"""
VSP_IMPORT_SCREEN = _vsp_g.VSP_IMPORT_SCREEN
r"""Import screen"""
VSP_LIGHTING_SCREEN = _vsp_g.VSP_LIGHTING_SCREEN
r"""Lighting screen"""
VSP_MANAGE_GEOM_SCREEN = _vsp_g.VSP_MANAGE_GEOM_SCREEN
r"""Manage geom screen"""
VSP_MANAGE_TEXTURE_SCREEN = _vsp_g.VSP_MANAGE_TEXTURE_SCREEN
r"""Texture mapping screen"""
VSP_MASS_PROP_SCREEN = _vsp_g.VSP_MASS_PROP_SCREEN
r"""Mass properties screen"""
VSP_MATERIAL_EDIT_SCREEN = _vsp_g.VSP_MATERIAL_EDIT_SCREEN
r"""Material edit screen"""
VSP_MEASURE_SCREEN = _vsp_g.VSP_MEASURE_SCREEN
r"""Measure screen"""
VSP_MODE_EDITOR_SCREEN = _vsp_g.VSP_MODE_EDITOR_SCREEN
r"""Mode editor screen"""
VSP_NERF_MANAGE_GEOM_SCREEN = _vsp_g.VSP_NERF_MANAGE_GEOM_SCREEN
r"""NERF'ed (limited to make safe) Manage geom screen"""
VSP_SNAP_TO_SCREEN = _vsp_g.VSP_SNAP_TO_SCREEN
r"""Snap to screen"""
VSP_PARASITE_DRAG_SCREEN = _vsp_g.VSP_PARASITE_DRAG_SCREEN
r"""Parasite drg screen"""
VSP_PARM_DEBUG_SCREEN = _vsp_g.VSP_PARM_DEBUG_SCREEN
r"""Parameter debug screen"""
VSP_PARM_LINK_SCREEN = _vsp_g.VSP_PARM_LINK_SCREEN
r"""Parameter linking screen"""
VSP_PARM_SCREEN = _vsp_g.VSP_PARM_SCREEN
r"""Parameter screen"""
VSP_PICK_SET_SCREEN = _vsp_g.VSP_PICK_SET_SCREEN
r"""Pick set screen"""
VSP_PREFERENCES_SCREEN = _vsp_g.VSP_PREFERENCES_SCREEN
r"""Preferences screen"""
VSP_PROJECTION_SCREEN = _vsp_g.VSP_PROJECTION_SCREEN
r"""Projected area screen"""
VSP_PSLICE_SCREEN = _vsp_g.VSP_PSLICE_SCREEN
r"""Planar slicing screen"""
VSP_RESULTS_VIEWER_SCREEN = _vsp_g.VSP_RESULTS_VIEWER_SCREEN
r"""Results viewing screen"""
VSP_SCREENSHOT_SCREEN = _vsp_g.VSP_SCREENSHOT_SCREEN
r"""Screenshot screen"""
VSP_SELECT_FILE_SCREEN = _vsp_g.VSP_SELECT_FILE_SCREEN
r"""Select file screen"""
VSP_SET_EDITOR_SCREEN = _vsp_g.VSP_SET_EDITOR_SCREEN
r"""Set editor screen"""
VSP_STEP_OPTIONS_SCREEN = _vsp_g.VSP_STEP_OPTIONS_SCREEN
r"""STEP options screen"""
VSP_STEP_STRUCTURE_OPTIONS_SCREEN = _vsp_g.VSP_STEP_STRUCTURE_OPTIONS_SCREEN
r"""STEP structure options screen"""
VSP_STL_OPTIONS_SCREEN = _vsp_g.VSP_STL_OPTIONS_SCREEN
r"""STL options screen"""
VSP_STRUCT_SCREEN = _vsp_g.VSP_STRUCT_SCREEN
r"""Structure definition screen"""
VSP_STRUCT_ASSEMBLY_SCREEN = _vsp_g.VSP_STRUCT_ASSEMBLY_SCREEN
r"""Structure assembly screen"""
VSP_SURFACE_INTERSECTION_SCREEN = _vsp_g.VSP_SURFACE_INTERSECTION_SCREEN
r"""Surface intersection screen"""
VSP_SVG_OPTIONS_SCREEN = _vsp_g.VSP_SVG_OPTIONS_SCREEN
r"""SVG options screen"""
VSP_USER_PARM_SCREEN = _vsp_g.VSP_USER_PARM_SCREEN
r"""User parameter screen"""
VSP_VAR_PRESET_SCREEN = _vsp_g.VSP_VAR_PRESET_SCREEN
r"""Variable presets editor screen"""
VSP_VEH_NOTES_SCREEN = _vsp_g.VSP_VEH_NOTES_SCREEN
r"""Vehicle notes screen"""
VSP_VEH_SCREEN = _vsp_g.VSP_VEH_SCREEN
r"""Veh geom screen"""
VSP_VIEW_SCREEN = _vsp_g.VSP_VIEW_SCREEN
r"""Adjust viewpoint screen"""
VSP_VSPAERO_PLOT_SCREEN = _vsp_g.VSP_VSPAERO_PLOT_SCREEN
r"""VSPAERO results manager screen"""
VSP_VSPAERO_SCREEN = _vsp_g.VSP_VSPAERO_SCREEN
r"""VSPAERO screen"""
VSP_XSEC_SCREEN = _vsp_g.VSP_XSEC_SCREEN
r"""XSec screen"""
VSP_WAVEDRAG_SCREEN = _vsp_g.VSP_WAVEDRAG_SCREEN
r"""Wave drag screen"""
VSP_MAIN_SCREEN = _vsp_g.VSP_MAIN_SCREEN
r"""Main screen"""
VSP_NUM_SCREENS = _vsp_g.VSP_NUM_SCREENS
r"""Number of screens"""
VSP_ALL_SCREENS = _vsp_g.VSP_ALL_SCREENS
r"""Flag for all screens"""
EDIT_XSEC_CIRCLE = _vsp_g.EDIT_XSEC_CIRCLE
r"""Circle initialized as cubic Bezier type"""
EDIT_XSEC_ELLIPSE = _vsp_g.EDIT_XSEC_ELLIPSE
r"""Ellipse initialized as PCHIP type"""
EDIT_XSEC_RECTANGLE = _vsp_g.EDIT_XSEC_RECTANGLE
r"""Rectangle initialized as linear type"""
NUM_INIT_EDIT_XSEC_TYPES = _vsp_g.NUM_INIT_EDIT_XSEC_TYPES
r"""Number of initializable edit curve types"""
IMPORT_STL = _vsp_g.IMPORT_STL
r"""Stereolith (\*.stl) import"""
IMPORT_NASCART = _vsp_g.IMPORT_NASCART
r"""NASCART (\*.dat) import"""
IMPORT_CART3D_TRI = _vsp_g.IMPORT_CART3D_TRI
r"""Cart3D (\*.try) import"""
IMPORT_XSEC_MESH = _vsp_g.IMPORT_XSEC_MESH
r"""XSec as Tri Mesh (\*.hrm) import"""
IMPORT_PTS = _vsp_g.IMPORT_PTS
r"""Point Cloud (\*.pts) import"""
IMPORT_V2 = _vsp_g.IMPORT_V2
r"""OpenVSP v2 (\*.vsp) import"""
IMPORT_BEM = _vsp_g.IMPORT_BEM
r"""Blade Element (\*.bem) import"""
IMPORT_XSEC_WIRE = _vsp_g.IMPORT_XSEC_WIRE
r"""XSec as Wireframe (\*.hrm) import"""
IMPORT_P3D_WIRE = _vsp_g.IMPORT_P3D_WIRE
r"""Plot3D as Wireframe (\*.p3d) import"""
INTERSECT_SRF_FILE_NAME = _vsp_g.INTERSECT_SRF_FILE_NAME
r"""SRF intersection file type"""
INTERSECT_CURV_FILE_NAME = _vsp_g.INTERSECT_CURV_FILE_NAME
r"""CURV intersection file type"""
INTERSECT_PLOT3D_FILE_NAME = _vsp_g.INTERSECT_PLOT3D_FILE_NAME
r"""PLOT3D intersection file type"""
INTERSECT_IGES_FILE_NAME = _vsp_g.INTERSECT_IGES_FILE_NAME
r"""IGES intersection file type"""
INTERSECT_STEP_FILE_NAME = _vsp_g.INTERSECT_STEP_FILE_NAME
r"""STEP intersection file type"""
INTERSECT_NUM_FILE_NAMES = _vsp_g.INTERSECT_NUM_FILE_NAMES
r"""Number of surface intersection file types"""
LEN_MM = _vsp_g.LEN_MM
r"""Millimeter"""
LEN_CM = _vsp_g.LEN_CM
r"""Centimeter"""
LEN_M = _vsp_g.LEN_M
r"""Meter"""
LEN_IN = _vsp_g.LEN_IN
r"""Inch"""
LEN_FT = _vsp_g.LEN_FT
r"""Feet"""
LEN_YD = _vsp_g.LEN_YD
r"""Yard"""
LEN_UNITLESS = _vsp_g.LEN_UNITLESS
r"""Unitless"""
NUM_LEN_UNIT = _vsp_g.NUM_LEN_UNIT
r"""Number of length unit types"""
MASS_UNIT_G = _vsp_g.MASS_UNIT_G
r"""Gram"""
MASS_UNIT_KG = _vsp_g.MASS_UNIT_KG
r"""Kilogram"""
MASS_UNIT_TONNE = _vsp_g.MASS_UNIT_TONNE
r"""Tonne"""
MASS_UNIT_LBM = _vsp_g.MASS_UNIT_LBM
r"""Pound-mass"""
MASS_UNIT_SLUG = _vsp_g.MASS_UNIT_SLUG
r"""Slug"""
MASS_LBFSEC2IN = _vsp_g.MASS_LBFSEC2IN
r"""lbf*sec^2/in"""
NUM_MASS_UNIT = _vsp_g.NUM_MASS_UNIT
r"""Number of mass unit types"""
NO_REASON = _vsp_g.NO_REASON
r"""No reason determined."""
MAX_LEN_CONSTRAINT = _vsp_g.MAX_LEN_CONSTRAINT
r"""Maximum edge length."""
CURV_GAP = _vsp_g.CURV_GAP
r"""Maximum gap curvature based criteria."""
CURV_NCIRCSEG = _vsp_g.CURV_NCIRCSEG
r"""Minimum number of segments to define a circle curvature based criteria."""
SOURCES = _vsp_g.SOURCES
r"""Mesh sources."""
MIN_LEN_CONSTRAINT = _vsp_g.MIN_LEN_CONSTRAINT
r"""Minimum edge length."""
MIN_LEN_CONSTRAINT_CURV_GAP = _vsp_g.MIN_LEN_CONSTRAINT_CURV_GAP
r"""Maximum gap constrained by minimum length."""
MIN_LEN_CONSTRAINT_CURV_NCIRCSEG = _vsp_g.MIN_LEN_CONSTRAINT_CURV_NCIRCSEG
r"""Number of segments to define a circle constrained by minimum length."""
MIN_LEN_CONSTRAINT_SOURCES = _vsp_g.MIN_LEN_CONSTRAINT_SOURCES
r"""Mesh sources constrained by minimum length (not applied)."""
GROW_LIMIT_MAX_LEN_CONSTRAINT = _vsp_g.GROW_LIMIT_MAX_LEN_CONSTRAINT
r"""Maximum growth limit from maximum edge length (not used, growth limited small to large)."""
GROW_LIMIT_CURV_GAP = _vsp_g.GROW_LIMIT_CURV_GAP
r"""Maximum growth limit from maximum gap."""
GROW_LIMIT_CURV_NCIRCSEG = _vsp_g.GROW_LIMIT_CURV_NCIRCSEG
r"""Maximum growth limit from number of segments to define a circle."""
GROW_LIMIT_SOURCES = _vsp_g.GROW_LIMIT_SOURCES
r"""Maximum growth limit from mesh sources."""
GROW_LIMIT_MIN_LEN_CONSTRAINT = _vsp_g.GROW_LIMIT_MIN_LEN_CONSTRAINT
r"""Maximum growth limit from minimum length constraint."""
GROW_LIMIT_MIN_LEN_CONSTRAINT_CURV_GAP = _vsp_g.GROW_LIMIT_MIN_LEN_CONSTRAINT_CURV_GAP
r"""Maximum growth limit from maximum gap constrained by minimum length."""
GROW_LIMIT_MIN_LEN_CONSTRAINT_CURV_NCIRCSEG = _vsp_g.GROW_LIMIT_MIN_LEN_CONSTRAINT_CURV_NCIRCSEG
r"""Maximum growth limit from number of segments to define a circle constrained by minimum length."""
GROW_LIMIT_MIN_LEN_CONSTRAINT_SOURCES = _vsp_g.GROW_LIMIT_MIN_LEN_CONSTRAINT_SOURCES
r"""Maximum growth limit from sources constrained by minimum length."""
NUM_MESH_REASON = _vsp_g.NUM_MESH_REASON
r"""Number of reasons that can set the mesh local minimum edge length."""
MIN_LEN_INCREMENT = _vsp_g.MIN_LEN_INCREMENT
r"""Reason increment when adding minimum length constraint."""
GROW_LIMIT_INCREMENT = _vsp_g.GROW_LIMIT_INCREMENT
r"""Reason increment when adding growth limit constraint."""
MIN_GROW_LIMIT = _vsp_g.MIN_GROW_LIMIT
r"""Reason marker for minimum reason to apply growth limit."""
TRI_MESH_TYPE = _vsp_g.TRI_MESH_TYPE
r"""Triangle mesh"""
QUAD_MESH_TYPE = _vsp_g.QUAD_MESH_TYPE
r"""Quadrilateral mesh"""
NGON_MESH_TYPE = _vsp_g.NGON_MESH_TYPE
r"""N-gon mesh"""
NUM_MESH_TYPE = _vsp_g.NUM_MESH_TYPE
r"""Number of mesh types"""
EXTENT_FORWARD_INF = _vsp_g.EXTENT_FORWARD_INF
r"""Forward beyond extent of model."""
EXTENT_REVERSE_INF = _vsp_g.EXTENT_REVERSE_INF
r"""Reverse beyond extent of model."""
EXTENT_FORWARD_FINITE = _vsp_g.EXTENT_FORWARD_FINITE
r"""Forward displacement."""
EXTENT_REVERSE_FINITE = _vsp_g.EXTENT_REVERSE_FINITE
r"""Reverse displacement."""
EXTENT_SLIDER_FULL = _vsp_g.EXTENT_SLIDER_FULL
r"""Full range of slider motion."""
EXTENT_SLIDER_BEFORE = _vsp_g.EXTENT_SLIDER_BEFORE
r"""Slider motion from start to current position."""
EXTENT_SLIDER_AFTER = _vsp_g.EXTENT_SLIDER_AFTER
r"""Slider motion from current position to end."""
MOTION_NUM_EXTENT_TYPES = _vsp_g.MOTION_NUM_EXTENT_TYPES
r"""Number of swept volume extent types."""
ID_LENGTH_PRESET_GROUP = _vsp_g.ID_LENGTH_PRESET_GROUP
r"""ID for Var Preset Groups are length 5"""
ID_LENGTH_PRESET_SETTING = _vsp_g.ID_LENGTH_PRESET_SETTING
r"""ID for Var Preset Settings are length 6"""
ID_LENGTH_ATTR = _vsp_g.ID_LENGTH_ATTR
r"""ID for Attributes are length 8"""
ID_LENGTH_ATTRCOLL = _vsp_g.ID_LENGTH_ATTRCOLL
r"""ID for Attribute Collections are length 9"""
ID_LENGTH_PARMCONTAINER = _vsp_g.ID_LENGTH_PARMCONTAINER
r"""ID for Parm Containers are length 10"""
ID_LENGTH_PARM = _vsp_g.ID_LENGTH_PARM
r"""ID for Parms are length 11"""
PARM_DOUBLE_TYPE = _vsp_g.PARM_DOUBLE_TYPE
r"""Double Parm type (Parm)"""
PARM_INT_TYPE = _vsp_g.PARM_INT_TYPE
r"""Integer Parm type (IntParm)"""
PARM_BOOL_TYPE = _vsp_g.PARM_BOOL_TYPE
r"""Bool Parm type (BoolParm)"""
PARM_FRACTION_TYPE = _vsp_g.PARM_FRACTION_TYPE
r"""Fraction Parm type (FractionParm)"""
PARM_LIMITED_INT_TYPE = _vsp_g.PARM_LIMITED_INT_TYPE
r"""Limited integer Parm type (LimIntParm)"""
PARM_NOTEQ_TYPE = _vsp_g.PARM_NOTEQ_TYPE
r"""Not equal Parm type (NotEqParm)"""
PARM_POWER_INT_TYPE = _vsp_g.PARM_POWER_INT_TYPE
r"""Power integer Parm type (PowIntParm)"""
PATCH_NONE = _vsp_g.PATCH_NONE
r"""No patch"""
PATCH_POINT = _vsp_g.PATCH_POINT
r"""Point patch type"""
PATCH_LINE = _vsp_g.PATCH_LINE
r"""Line patch type"""
PATCH_COPY = _vsp_g.PATCH_COPY
r"""Copy patch type"""
PATCH_HALFWAY = _vsp_g.PATCH_HALFWAY
r"""Halfway patch type"""
PATCH_NUM_TYPES = _vsp_g.PATCH_NUM_TYPES
r"""Number of patch types"""
LINEAR = _vsp_g.LINEAR
r"""Linear curve type"""
PCHIP = _vsp_g.PCHIP
r"""Piecewise Cubic Hermite Interpolating Polynomial curve type"""
CEDIT = _vsp_g.CEDIT
r"""Cubic Bezier curve type"""
APPROX_CEDIT = _vsp_g.APPROX_CEDIT
r"""Approximate curve as Cubic Bezier"""
NUM_PCURV_TYPE = _vsp_g.NUM_PCURV_TYPE
r"""Number of curve types"""
PRES_UNIT_PSF = _vsp_g.PRES_UNIT_PSF
r"""Pounds per square foot"""
PRES_UNIT_PSI = _vsp_g.PRES_UNIT_PSI
r"""Pounds per square inch"""
PRES_UNIT_BA = _vsp_g.PRES_UNIT_BA
r"""Barye"""
PRES_UNIT_PA = _vsp_g.PRES_UNIT_PA
r"""Pascal"""
PRES_UNIT_KPA = _vsp_g.PRES_UNIT_KPA
r"""Kilopascal"""
PRES_UNIT_MPA = _vsp_g.PRES_UNIT_MPA
r"""Megapascal"""
PRES_UNIT_INCHHG = _vsp_g.PRES_UNIT_INCHHG
r"""Inch of mercury"""
PRES_UNIT_MMHG = _vsp_g.PRES_UNIT_MMHG
r"""Millimeter of mercury"""
PRES_UNIT_MMH20 = _vsp_g.PRES_UNIT_MMH20
r"""Millimeter of water"""
PRES_UNIT_MB = _vsp_g.PRES_UNIT_MB
r"""Millibar"""
PRES_UNIT_ATM = _vsp_g.PRES_UNIT_ATM
r"""Atmosphere"""
NUM_PRES_UNIT = _vsp_g.NUM_PRES_UNIT
r"""Number of pressure unit choices"""
NO_BOUNDARY = _vsp_g.NO_BOUNDARY
r"""No boundary"""
SET_BOUNDARY = _vsp_g.SET_BOUNDARY
r"""Set boundary"""
GEOM_BOUNDARY = _vsp_g.GEOM_BOUNDARY
r"""Geom boundary"""
NUM_PROJ_BNDY_OPTIONS = _vsp_g.NUM_PROJ_BNDY_OPTIONS
r"""Number of projected area boundary options"""
X_PROJ = _vsp_g.X_PROJ
r"""Project in X axis direction"""
Y_PROJ = _vsp_g.Y_PROJ
r"""Project in Y axis direction"""
Z_PROJ = _vsp_g.Z_PROJ
r"""Project in Z axis direction"""
GEOM_PROJ = _vsp_g.GEOM_PROJ
r"""Project toward a Geom"""
VEC_PROJ = _vsp_g.VEC_PROJ
r"""Project along a 3D vector"""
NUM_PROJ_DIR_OPTIONS = _vsp_g.NUM_PROJ_DIR_OPTIONS
r"""Number of Projected Area direction types"""
SET_TARGET = _vsp_g.SET_TARGET
r"""Set target type"""
GEOM_TARGET = _vsp_g.GEOM_TARGET
r"""Geom target type"""
MODE_TARGET = _vsp_g.MODE_TARGET
r"""Mode target type"""
Z_TARGET = _vsp_g.Z_TARGET
r"""Z plane target type"""
XYZ_TARGET = _vsp_g.XYZ_TARGET
r"""XYZ point target type"""
NUM_PROJ_TGT_OPTIONS = _vsp_g.NUM_PROJ_TGT_OPTIONS
r"""Number of Projected Area target types"""
PROP_AZI_UNIFORM = _vsp_g.PROP_AZI_UNIFORM
r"""Propeller blades are uniformly spaced"""
PROP_AZI_FREE = _vsp_g.PROP_AZI_FREE
r"""Propeller blades are free to spaced arbitrarially"""
PROP_AZI_BALANCED = _vsp_g.PROP_AZI_BALANCED
r"""Propeller blade balance is enforced"""
NUM_PROP_AZI = _vsp_g.NUM_PROP_AZI
r"""Number of propeller blade azimuth modes"""
PROP_BLADE_TRADITIONAL = _vsp_g.PROP_BLADE_TRADITIONAL
r"""Traditional straight blades"""
PROP_BLADE_NONTRADITIONAL = _vsp_g.PROP_BLADE_NONTRADITIONAL
r"""Non-traditional blades"""
NUM_PROP_BLADE_MODES = _vsp_g.NUM_PROP_BLADE_MODES
r"""Number of propeller blade modes"""
RPM_PROP_DRIVER = _vsp_g.RPM_PROP_DRIVER
r"""RPM driver"""
CT_PROP_DRIVER = _vsp_g.CT_PROP_DRIVER
r"""Thrust coefficient driver"""
CP_PROP_DRIVER = _vsp_g.CP_PROP_DRIVER
r"""Power coefficient driver"""
T_PROP_DRIVER = _vsp_g.T_PROP_DRIVER
r"""Thrust driver"""
ETA_PROP_DRIVER = _vsp_g.ETA_PROP_DRIVER
r"""Prop efficiency driver"""
J_PROP_DRIVER = _vsp_g.J_PROP_DRIVER
r"""Advance ratio driver"""
P_PROP_DRIVER = _vsp_g.P_PROP_DRIVER
r"""Power driver"""
CQ_PROP_DRIVER = _vsp_g.CQ_PROP_DRIVER
r"""Torque coefficient driver"""
Q_PROP_DRIVER = _vsp_g.Q_PROP_DRIVER
r"""Torque driver"""
NUM_PROP_DRIVER = _vsp_g.NUM_PROP_DRIVER
r"""Number of actuator disk drivers"""
PROP_BLADES = _vsp_g.PROP_BLADES
r"""Propeller Geom is defined by individual propeller blades"""
PROP_BOTH = _vsp_g.PROP_BOTH
r"""Propeller Geom is defined by blades and a disk together"""
PROP_DISK = _vsp_g.PROP_DISK
r"""Propeller Geom is defined by a flat circular disk"""
PROP_CHORD = _vsp_g.PROP_CHORD
r"""Chord parameterization"""
PROP_TWIST = _vsp_g.PROP_TWIST
r"""Twist parameterization"""
PROP_RAKE = _vsp_g.PROP_RAKE
r"""Rake parameterization"""
PROP_SKEW = _vsp_g.PROP_SKEW
r"""Skew parameterization"""
PROP_SWEEP = _vsp_g.PROP_SWEEP
r"""Sweep parameterization"""
PROP_THICK = _vsp_g.PROP_THICK
r"""Thickness parameterization"""
PROP_CLI = _vsp_g.PROP_CLI
r"""Induced lift coefficient parameterization"""
PROP_AXIAL = _vsp_g.PROP_AXIAL
r"""Axial parameterization"""
PROP_TANGENTIAL = _vsp_g.PROP_TANGENTIAL
r"""Tangential parameterization"""
NUM_PROP_PCURVE = _vsp_g.NUM_PROP_PCURVE
r"""Number of propeller blade curve parameterization options"""
REORDER_MOVE_UP = _vsp_g.REORDER_MOVE_UP
r"""Move up one position"""
REORDER_MOVE_DOWN = _vsp_g.REORDER_MOVE_DOWN
r"""Move down one position"""
REORDER_MOVE_TOP = _vsp_g.REORDER_MOVE_TOP
r"""Move to top"""
REORDER_MOVE_BOTTOM = _vsp_g.REORDER_MOVE_BOTTOM
r"""Move to bottom"""
NUM_REORDER_TYPES = _vsp_g.NUM_REORDER_TYPES
r"""Number reordering instructions"""
MANUAL_REF = _vsp_g.MANUAL_REF
r"""Manually specify the reference areas and lengths"""
COMPONENT_REF = _vsp_g.COMPONENT_REF
r"""Use a particular wing to calculate the reference area and lengths"""
NUM_REF_TYPES = _vsp_g.NUM_REF_TYPES
r"""Number of wing reference types"""
INVALID_TYPE = _vsp_g.INVALID_TYPE
r"""Invalid data type"""
BOOL_DATA = _vsp_g.BOOL_DATA
r"""Bool data type"""
INT_DATA = _vsp_g.INT_DATA
r"""Integer data type"""
DOUBLE_DATA = _vsp_g.DOUBLE_DATA
r"""Double data type"""
STRING_DATA = _vsp_g.STRING_DATA
r"""String data type"""
VEC3D_DATA = _vsp_g.VEC3D_DATA
r"""Vec3d data type"""
INT_MATRIX_DATA = _vsp_g.INT_MATRIX_DATA
r"""Int matrix data type"""
DOUBLE_MATRIX_DATA = _vsp_g.DOUBLE_MATRIX_DATA
r"""Double matrix data type"""
ATTR_COLLECTION_DATA = _vsp_g.ATTR_COLLECTION_DATA
r"""Attribute collection data type"""
PARM_REFERENCE_DATA = _vsp_g.PARM_REFERENCE_DATA
r"""Parm reference data type"""
MESH_INDEXED_TRI = _vsp_g.MESH_INDEXED_TRI
r"""Indexed triangulated mesh Geom type"""
MESH_SLICE_TRI = _vsp_g.MESH_SLICE_TRI
r"""Sliced Triangulated mesh Geom type"""
GEOM_XSECS = _vsp_g.GEOM_XSECS
r"""GeomXSec Geom type"""
MESH_INDEX_AND_SLICE_TRI = _vsp_g.MESH_INDEX_AND_SLICE_TRI
r"""Both indexed and sliced triangulated mesh Geom type"""
RHO_UNIT_SLUG_FT3 = _vsp_g.RHO_UNIT_SLUG_FT3
r"""Slug per cubic foot"""
RHO_UNIT_G_CM3 = _vsp_g.RHO_UNIT_G_CM3
r"""Gram per cubic centimeter"""
RHO_UNIT_KG_M3 = _vsp_g.RHO_UNIT_KG_M3
r"""Kilogram per cubic meter"""
RHO_UNIT_TONNE_MM3 = _vsp_g.RHO_UNIT_TONNE_MM3
r"""Tonne per cubic millimeter"""
RHO_UNIT_LBM_FT3 = _vsp_g.RHO_UNIT_LBM_FT3
r"""Pound-mass per cubic foot"""
RHO_UNIT_LBFSEC2_IN4 = _vsp_g.RHO_UNIT_LBFSEC2_IN4
r"""Pound-force-second squared per inch to the fourth"""
RHO_UNIT_LBM_IN3 = _vsp_g.RHO_UNIT_LBM_IN3
r"""Pound-mass per cubic inch"""
NUM_RHO_UNIT = _vsp_g.NUM_RHO_UNIT
r"""Number of density unit options"""
ROUTE_PT_COMP = _vsp_g.ROUTE_PT_COMP
r"""Routing point relative to parent body axes"""
ROUTE_PT_UV = _vsp_g.ROUTE_PT_UV
r"""Routing point relative to parent surface coordinate frame"""
ROUTE_PT_RST = _vsp_g.ROUTE_PT_RST
r"""Routing point relative to parent per-section volume coordinate frame"""
ROUTE_PT_LMN = _vsp_g.ROUTE_PT_LMN
r"""Routing point relative to parent uniform volume coordinate frame"""
ROUTE_PT_EtaMN = _vsp_g.ROUTE_PT_EtaMN
r"""Routing point relative to wing parent uniform eta volume coordinate frame"""
ROUTE_PT_NUM_TYPES = _vsp_g.ROUTE_PT_NUM_TYPES
r"""Number of routing point coordinate types"""
ROUTE_PT_DELTA_XYZ = _vsp_g.ROUTE_PT_DELTA_XYZ
r"""Routing point ofset in global axes"""
ROUTE_PT_DELTA_COMP = _vsp_g.ROUTE_PT_DELTA_COMP
r"""Routing point offset in parent body frame"""
ROUTE_PT_DELTA_UVN = _vsp_g.ROUTE_PT_DELTA_UVN
r"""Routing point offset in parent surface coordinate frame"""
ROUTE_PT_DELTA_NUM_TYPES = _vsp_g.ROUTE_PT_DELTA_NUM_TYPES
r"""Number of routing point offset coordinate types"""
SCALE_WIDTH = _vsp_g.SCALE_WIDTH
r"""Scale image to match desired width with 1:1 AR"""
SCALE_HEIGHT = _vsp_g.SCALE_HEIGHT
r"""Scale image to match desired height with 1:1 AR"""
SCALE_WIDTH_HEIGHT = _vsp_g.SCALE_WIDTH_HEIGHT
r"""Scale image to match desired width and height"""
SCALE_RESOLUTION = _vsp_g.SCALE_RESOLUTION
r"""Scale image to specified resolution"""
SCALE_WIDTH_AR = _vsp_g.SCALE_WIDTH_AR
r"""Scale image to match desired width with specified AR"""
SCALE_HEIGHT_AR = _vsp_g.SCALE_HEIGHT_AR
r"""Scale image to match desired height with specified AR"""
NUM_SCALE_TYPES = _vsp_g.NUM_SCALE_TYPES
r"""Number of ways to scale 3D background image."""
SET_NONE = _vsp_g.SET_NONE
r"""None set"""
SET_ALL = _vsp_g.SET_ALL
r"""All set"""
SET_SHOWN = _vsp_g.SET_SHOWN
r"""Shown set"""
SET_NOT_SHOWN = _vsp_g.SET_NOT_SHOWN
r"""Not shown set"""
SET_FIRST_USER = _vsp_g.SET_FIRST_USER
r"""First user-defined set"""
MIN_NUM_USER = _vsp_g.MIN_NUM_USER
r"""Minimum number of user sets"""
MAX_NUM_SETS = _vsp_g.MAX_NUM_SETS
r"""Maximum possible number of sets"""
STEP_SHELL = _vsp_g.STEP_SHELL
r"""Manifold shell surface STEP file representation"""
STEP_BREP = _vsp_g.STEP_BREP
r"""Manifold solid BREP STEP file representation"""
SS_INC_TREAT_AS_PARENT = _vsp_g.SS_INC_TREAT_AS_PARENT
r"""Treat the sub-surface the same as the parent"""
SS_INC_SEPARATE_TREATMENT = _vsp_g.SS_INC_SEPARATE_TREATMENT
r"""Treat the sub-surface separately from the parent"""
SS_INC_ZERO_DRAG = _vsp_g.SS_INC_ZERO_DRAG
r"""No drag contribution for the sub-surface"""
INSIDE = _vsp_g.INSIDE
r"""The interior of the sub-surface is its surface"""
OUTSIDE = _vsp_g.OUTSIDE
r"""The exterior of the sub-surface is its surface"""
NONE = _vsp_g.NONE
r"""No part of the parent surface belongs to the sub-surface"""
CONST_U = _vsp_g.CONST_U
r"""Constant U sub-surface"""
CONST_W = _vsp_g.CONST_W
r"""Constant W sub-surface"""
SS_LINE = _vsp_g.SS_LINE
r"""Line sub-surface type"""
SS_RECTANGLE = _vsp_g.SS_RECTANGLE
r"""Rectangle sub-surface type"""
SS_ELLIPSE = _vsp_g.SS_ELLIPSE
r"""Ellipse sub-surface type"""
SS_CONTROL = _vsp_g.SS_CONTROL
r"""Control sub-surface type"""
SS_LINE_ARRAY = _vsp_g.SS_LINE_ARRAY
r"""Line array sub-surface type"""
SS_FINITE_LINE = _vsp_g.SS_FINITE_LINE
r"""Finite line sub-surface type"""
SS_XSEC_CURVE = _vsp_g.SS_XSEC_CURVE
r"""XSecCurve based sub-surface type"""
SS_INTERSECT = _vsp_g.SS_INTERSECT
r"""Intersection derived sub-surface type"""
SS_NUM_TYPES = _vsp_g.SS_NUM_TYPES
r"""Number of sub-surface types"""
SYM_XY = _vsp_g.SYM_XY
r"""XY planar symmetry."""
SYM_XZ = _vsp_g.SYM_XZ
r"""XZ planar symmetry."""
SYM_YZ = _vsp_g.SYM_YZ
r"""YZ planar symmetry."""
SYM_ROT_X = _vsp_g.SYM_ROT_X
r"""X rotational symmetry."""
SYM_ROT_Y = _vsp_g.SYM_ROT_Y
r"""Y rotational symmetry."""
SYM_ROT_Z = _vsp_g.SYM_ROT_Z
r"""Z rotational symmetry."""
SYM_PLANAR_TYPES = _vsp_g.SYM_PLANAR_TYPES
r"""Number of planar symmetry types."""
SYM_NUM_TYPES = _vsp_g.SYM_NUM_TYPES
r"""Number of symmetry types."""
SYM_NONE = _vsp_g.SYM_NONE
r"""No cross section symmetry."""
SYM_RL = _vsp_g.SYM_RL
r"""Right/left cross section symmetry."""
SYM_TB = _vsp_g.SYM_TB
r"""Top/bottom cross section symmetry."""
SYM_ALL = _vsp_g.SYM_ALL
r"""All cross section symmetry."""
TEMP_UNIT_K = _vsp_g.TEMP_UNIT_K
r"""Kelvin"""
TEMP_UNIT_C = _vsp_g.TEMP_UNIT_C
r"""Celsius"""
TEMP_UNIT_F = _vsp_g.TEMP_UNIT_F
r"""Fahrenheit"""
TEMP_UNIT_R = _vsp_g.TEMP_UNIT_R
r"""Rankine"""
NUM_TEMP_UNIT = _vsp_g.NUM_TEMP_UNIT
r"""Number of temperature unit choices"""
TIRE_NOMINAL_CLEARANCE = _vsp_g.TIRE_NOMINAL_CLEARANCE
r"""Tire nominal shape"""
TIRE_GROWTH_CLEARANCE = _vsp_g.TIRE_GROWTH_CLEARANCE
r"""Tire growth (spinning) clearance"""
TIRE_CLEARANCE = _vsp_g.TIRE_CLEARANCE
r"""TRA clearance envelope"""
NUM_TIRE_CLEARANCE_MODES = _vsp_g.NUM_TIRE_CLEARANCE_MODES
r"""Number of tire clearance modes"""
TIRE_STATIC_LODED_CONTACT = _vsp_g.TIRE_STATIC_LODED_CONTACT
r"""Tire static loaded radius"""
TIRE_NOMINAL_CONTACT = _vsp_g.TIRE_NOMINAL_CONTACT
r"""Tire nominal radius"""
TIRE_GROWTH_CONTACT = _vsp_g.TIRE_GROWTH_CONTACT
r"""Tire growth (spinning) radius"""
TIRE_FLAT_CONTACT = _vsp_g.TIRE_FLAT_CONTACT
r"""Tire flat tire radius"""
NUM_TIRE_CONTACT_MODES = _vsp_g.NUM_TIRE_CONTACT_MODES
r"""Number of tire radius modes"""
TIRE_DIM_IN = _vsp_g.TIRE_DIM_IN
r"""Tire dimensions in inches"""
TIRE_DIM_MODEL = _vsp_g.TIRE_DIM_MODEL
r"""Tire dimensions in model units"""
TIRE_DIM_FRAC = _vsp_g.TIRE_DIM_FRAC
r"""Tire dimensions as fractions"""
NUM_TIRE_DIM_MODES = _vsp_g.NUM_TIRE_DIM_MODES
r"""Number of tire dimension choices"""
TIRE_TRA = _vsp_g.TIRE_TRA
r"""Full TRA model"""
TIRE_FAIR_FLANGE = _vsp_g.TIRE_FAIR_FLANGE
r"""TRA with faired flange / flank"""
TIRE_FAIR_WHEEL = _vsp_g.TIRE_FAIR_WHEEL
r"""TRA with faired wheel"""
TIRE_BALLOON = _vsp_g.TIRE_BALLOON
r"""Balloon tire"""
TIRE_BALLOON_WHEEL = _vsp_g.TIRE_BALLOON_WHEEL
r"""Balloon tire with wheel"""
TIRE_BALLOON_FAIR_WHEEL = _vsp_g.TIRE_BALLOON_FAIR_WHEEL
r"""Balloon tire with faired wheel"""
NUM_TIRE_MODES = _vsp_g.NUM_TIRE_MODES
r"""Number of tire choices"""
V_UNIT_FT_S = _vsp_g.V_UNIT_FT_S
r"""Feet per second"""
V_UNIT_M_S = _vsp_g.V_UNIT_M_S
r"""Meter per second"""
V_UNIT_MPH = _vsp_g.V_UNIT_MPH
r"""Mile per hour"""
V_UNIT_KM_HR = _vsp_g.V_UNIT_KM_HR
r"""Kilometer per hour"""
V_UNIT_KEAS = _vsp_g.V_UNIT_KEAS
r"""Knots equivalent airspeed"""
V_UNIT_KTAS = _vsp_g.V_UNIT_KTAS
r"""Knots true airspeed"""
V_UNIT_MACH = _vsp_g.V_UNIT_MACH
r"""Mach"""
VIEW_1 = _vsp_g.VIEW_1
r"""One 2D view"""
VIEW_2HOR = _vsp_g.VIEW_2HOR
r"""Two horizontal 2D views"""
VIEW_2VER = _vsp_g.VIEW_2VER
r"""Two vertical 2D views"""
VIEW_4 = _vsp_g.VIEW_4
r"""Four 2D views"""
ROT_0 = _vsp_g.ROT_0
r"""No rotation"""
ROT_90 = _vsp_g.ROT_90
r"""90 degree rotation"""
ROT_180 = _vsp_g.ROT_180
r"""180 degree rotation"""
ROT_270 = _vsp_g.ROT_270
r"""270 degree rotation"""
VIEW_LEFT = _vsp_g.VIEW_LEFT
r"""Left 2D view type"""
VIEW_RIGHT = _vsp_g.VIEW_RIGHT
r"""Right 2D view type"""
VIEW_TOP = _vsp_g.VIEW_TOP
r"""Top 2D view type"""
VIEW_BOTTOM = _vsp_g.VIEW_BOTTOM
r"""Bottom 2D view type"""
VIEW_FRONT = _vsp_g.VIEW_FRONT
r"""Front 2D view type"""
VIEW_REAR = _vsp_g.VIEW_REAR
r"""Rear 2D view type"""
VIEW_NONE = _vsp_g.VIEW_NONE
r"""No 2D view type"""
VIEW_NUM_TYPES = _vsp_g.VIEW_NUM_TYPES
r"""Number of 2D view types"""
NOISE_FLYBY = _vsp_g.NOISE_FLYBY
r"""Set up fly by noise analysis in VSPAERO for PSU-WOPWOP"""
NOISE_FOOTPRINT = _vsp_g.NOISE_FOOTPRINT
r"""Set up footprint noise analysis in VSPAERO for PSU-WOPWOP"""
NOISE_STEADY = _vsp_g.NOISE_STEADY
r"""Set up steady state noise analysis in VSPAERO for PSU-WOPWOP"""
NOISE_SI = _vsp_g.NOISE_SI
r"""Assume geometry and VSPAERO inputs in SI (m N kg s) for PSU-WOPWOP"""
NOISE_ENGLISH = _vsp_g.NOISE_ENGLISH
r"""Assume geometry and VSPAERO inputs in english (ft lbf slug s) units, will convert to SI (m N kg s) for PSU-WOPWOP"""
VSPAERO_PROP_STATIC = _vsp_g.VSPAERO_PROP_STATIC
r"""Model propellers as static, non-rotating blades -- i.e. used as a wing."""
VSPAERO_PROP_UNSTEADY = _vsp_g.VSPAERO_PROP_UNSTEADY
r"""Model propellers as unsteady rotating blades"""
VSPAERO_PROP_PSEUDO_STEADY = _vsp_g.VSPAERO_PROP_PSEUDO_STEADY
r"""Model propellers with pseudo steady model"""
VSPAERO_PROP_NUM_MODES = _vsp_g.VSPAERO_PROP_NUM_MODES
r"""Number of ways to model propeller blades in VSPAERO"""
STABILITY_OFF = _vsp_g.STABILITY_OFF
r"""No stability analysis (off)"""
STABILITY_DEFAULT = _vsp_g.STABILITY_DEFAULT
r"""Steady 6DOF stability analysis"""
STABILITY_P_ANALYSIS = _vsp_g.STABILITY_P_ANALYSIS
r"""Unsteady roll stability analysis"""
STABILITY_Q_ANALYSIS = _vsp_g.STABILITY_Q_ANALYSIS
r"""Unsteady pitch stability analysis"""
STABILITY_R_ANALYSIS = _vsp_g.STABILITY_R_ANALYSIS
r"""Unsteady yaw stability analysis"""
STABILITY_PITCH = _vsp_g.STABILITY_PITCH
r"""Simplified pitch stability analysis"""
STABILITY_ADJOINT = _vsp_g.STABILITY_ADJOINT
r"""Steady 6DOF stability analysis using adjoint"""
STABILITY_NUM_TYPES = _vsp_g.STABILITY_NUM_TYPES
r"""Number of stability analysis types"""
STALL_OFF = _vsp_g.STALL_OFF
r"""Stall modeling off"""
STALL_ON = _vsp_g.STALL_ON
r"""Stall modeling on"""
CFD_NORMAL = _vsp_g.CFD_NORMAL
r"""Normal CFD Mesh surface"""
CFD_NEGATIVE = _vsp_g.CFD_NEGATIVE
r"""Negative volume CFD Mesh surface"""
CFD_TRANSPARENT = _vsp_g.CFD_TRANSPARENT
r"""Transparent CFD Mesh surface"""
CFD_STRUCTURE = _vsp_g.CFD_STRUCTURE
r"""FEA structure CFD Mesh surface"""
CFD_STIFFENER = _vsp_g.CFD_STIFFENER
r"""FEA stiffener CFD Mesh surface"""
CFD_MEASURE_DUCT = _vsp_g.CFD_MEASURE_DUCT
r"""Measure duct cross sectional area surface"""
CFD_NUM_TYPES = _vsp_g.CFD_NUM_TYPES
r"""Number of CFD Mesh surface types"""
NORMAL_SURF = _vsp_g.NORMAL_SURF
r"""Normal VSP surface"""
WING_SURF = _vsp_g.WING_SURF
r"""Wing VSP surface"""
DISK_SURF = _vsp_g.DISK_SURF
r"""Disk VSP surface"""
NUM_SURF_TYPES = _vsp_g.NUM_SURF_TYPES
r"""Number of VSP surface types"""
WHEEL_TIRE_1LG = _vsp_g.WHEEL_TIRE_1LG
r"""Large tire debris"""
WHEEL_TIRE_1SM = _vsp_g.WHEEL_TIRE_1SM
r"""Small tire debris"""
WHEEL_TIRE_2 = _vsp_g.WHEEL_TIRE_2
r"""Wheel flange debris"""
WHEEL_TIRE_3E = _vsp_g.WHEEL_TIRE_3E
r"""Flailing tire strip extended"""
WHEEL_TIRE_3R = _vsp_g.WHEEL_TIRE_3R
r"""Flailing tire strip retracted"""
WHEEL_TIRE_4 = _vsp_g.WHEEL_TIRE_4
r"""Tire burst pressure (Not implemented)"""
NUM_WHEEL_TIRE_FAILURE_MODES = _vsp_g.NUM_WHEEL_TIRE_FAILURE_MODES
r"""Number of wheel and tire failure modes"""
W_RIGHT_0 = _vsp_g.W_RIGHT_0
r"""Chevron start/ends at right (W = 0) of cross section"""
W_BOTTOM = _vsp_g.W_BOTTOM
r"""Chevron start/ends at bottom of cross section"""
W_LEFT = _vsp_g.W_LEFT
r"""Chevron start/ends at left of cross section"""
W_TOP = _vsp_g.W_TOP
r"""Chevron start/ends at top of cross section"""
W_RIGHT_1 = _vsp_g.W_RIGHT_1
r"""Chevron start/ends at right (W = 1) of cross section"""
W_FREE = _vsp_g.W_FREE
r"""Chevron start/ends at user specified point on cross section"""
BLEND_FREE = _vsp_g.BLEND_FREE
r"""Free blending"""
BLEND_ANGLES = _vsp_g.BLEND_ANGLES
r"""Blend based on angles (sweep & dihedral)"""
BLEND_MATCH_IN_LE_TRAP = _vsp_g.BLEND_MATCH_IN_LE_TRAP
r"""Match inboard leading edge trapezoid"""
BLEND_MATCH_IN_TE_TRAP = _vsp_g.BLEND_MATCH_IN_TE_TRAP
r"""Match inboard trailing edge trapezoid"""
BLEND_MATCH_OUT_LE_TRAP = _vsp_g.BLEND_MATCH_OUT_LE_TRAP
r"""Match outboard leading edge trapezoid"""
BLEND_MATCH_OUT_TE_TRAP = _vsp_g.BLEND_MATCH_OUT_TE_TRAP
r"""Match outboard trailing edge trapezoid"""
BLEND_MATCH_IN_ANGLES = _vsp_g.BLEND_MATCH_IN_ANGLES
r"""Match inboard angles"""
BLEND_MATCH_LE_ANGLES = _vsp_g.BLEND_MATCH_LE_ANGLES
r"""Match leading edge angles"""
BLEND_NUM_TYPES = _vsp_g.BLEND_NUM_TYPES
r"""Number of blending types"""
AR_WSECT_DRIVER = _vsp_g.AR_WSECT_DRIVER
r"""Aspect ratio driver"""
SPAN_WSECT_DRIVER = _vsp_g.SPAN_WSECT_DRIVER
r"""Span driver"""
AREA_WSECT_DRIVER = _vsp_g.AREA_WSECT_DRIVER
r"""Area driver"""
TAPER_WSECT_DRIVER = _vsp_g.TAPER_WSECT_DRIVER
r"""Taper driver"""
AVEC_WSECT_DRIVER = _vsp_g.AVEC_WSECT_DRIVER
r"""Average chord driver"""
ROOTC_WSECT_DRIVER = _vsp_g.ROOTC_WSECT_DRIVER
r"""Root chord driver"""
TIPC_WSECT_DRIVER = _vsp_g.TIPC_WSECT_DRIVER
r"""Tip chord driver"""
SECSWEEP_WSECT_DRIVER = _vsp_g.SECSWEEP_WSECT_DRIVER
r"""Section sweep driver"""
NUM_WSECT_DRIVER = _vsp_g.NUM_WSECT_DRIVER
r"""Number of wing section drivers"""
SWEEP_WSECT_DRIVER = _vsp_g.SWEEP_WSECT_DRIVER

SWEEPLOC_WSECT_DRIVER = _vsp_g.SWEEPLOC_WSECT_DRIVER

SECSWEEPLOC_WSECT_DRIVER = _vsp_g.SECSWEEPLOC_WSECT_DRIVER

XDDM_VAR = _vsp_g.XDDM_VAR
r"""Variable XDDM type"""
XDDM_CONST = _vsp_g.XDDM_CONST
r"""Constant XDDM type"""
CLOSE_NONE = _vsp_g.CLOSE_NONE
r"""No closure"""
CLOSE_SKEWLOW = _vsp_g.CLOSE_SKEWLOW
r"""Skew lower closure"""
CLOSE_SKEWUP = _vsp_g.CLOSE_SKEWUP
r"""Skew upper closure"""
CLOSE_SKEWBOTH = _vsp_g.CLOSE_SKEWBOTH
r"""Skew both closure"""
CLOSE_EXTRAP = _vsp_g.CLOSE_EXTRAP
r"""Extrapolate closure"""
CLOSE_NUM_TYPES = _vsp_g.CLOSE_NUM_TYPES
r"""Number of XSec closure types"""
XS_UNDEFINED = _vsp_g.XS_UNDEFINED

XS_POINT = _vsp_g.XS_POINT
r"""Point XSec"""
XS_CIRCLE = _vsp_g.XS_CIRCLE
r"""Circle XSec"""
XS_ELLIPSE = _vsp_g.XS_ELLIPSE
r"""Ellipse XSec"""
XS_SUPER_ELLIPSE = _vsp_g.XS_SUPER_ELLIPSE
r"""Super ellipse XSec"""
XS_ROUNDED_RECTANGLE = _vsp_g.XS_ROUNDED_RECTANGLE
r"""Rounded rectangle XSec"""
XS_GENERAL_FUSE = _vsp_g.XS_GENERAL_FUSE
r"""General fuselage XSec"""
XS_FILE_FUSE = _vsp_g.XS_FILE_FUSE
r"""Fuselage file XSec"""
XS_FOUR_SERIES = _vsp_g.XS_FOUR_SERIES
r"""Four series XSec"""
XS_SIX_SERIES = _vsp_g.XS_SIX_SERIES
r"""Six series XSec"""
XS_BICONVEX = _vsp_g.XS_BICONVEX
r"""Biconvex XSec"""
XS_WEDGE = _vsp_g.XS_WEDGE
r"""Wedge XSec"""
XS_EDIT_CURVE = _vsp_g.XS_EDIT_CURVE
r"""Generic Edit Curve XSec"""
XS_FILE_AIRFOIL = _vsp_g.XS_FILE_AIRFOIL
r"""Airfoil file XSec"""
XS_CST_AIRFOIL = _vsp_g.XS_CST_AIRFOIL
r"""CST airfoil XSec"""
XS_VKT_AIRFOIL = _vsp_g.XS_VKT_AIRFOIL
r"""VKT airfoil XSec"""
XS_FOUR_DIGIT_MOD = _vsp_g.XS_FOUR_DIGIT_MOD
r"""Four digit modified XSec"""
XS_FIVE_DIGIT = _vsp_g.XS_FIVE_DIGIT
r"""Five digit XSec"""
XS_FIVE_DIGIT_MOD = _vsp_g.XS_FIVE_DIGIT_MOD
r"""Five digit modified XSec"""
XS_ONE_SIX_SERIES = _vsp_g.XS_ONE_SIX_SERIES
r"""One six series XSec"""
XS_AC25_773 = _vsp_g.XS_AC25_773
r"""FAA AC 25.773 pilot view requirement"""
XS_NUM_TYPES = _vsp_g.XS_NUM_TYPES
r"""Number of XSec types"""
WIDTH_XSEC_DRIVER = _vsp_g.WIDTH_XSEC_DRIVER
r"""Width driver"""
AREA_XSEC_DRIVER = _vsp_g.AREA_XSEC_DRIVER
r"""Area driver"""
HEIGHT_XSEC_DRIVER = _vsp_g.HEIGHT_XSEC_DRIVER
r"""Height driver"""
HWRATIO_XSEC_DRIVER = _vsp_g.HWRATIO_XSEC_DRIVER
r"""Height/width ratio driver"""
NUM_XSEC_DRIVER = _vsp_g.NUM_XSEC_DRIVER
r"""Number of XSec drivers"""
CIRCLE_NUM_XSEC_DRIVER = _vsp_g.CIRCLE_NUM_XSEC_DRIVER

FLAP_NONE = _vsp_g.FLAP_NONE
r"""No flap"""
FLAP_PLAIN = _vsp_g.FLAP_PLAIN
r"""Plain flap"""
FLAP_NUM_TYPES = _vsp_g.FLAP_NUM_TYPES
r"""Number of flap types"""
XSEC_BOTH_SIDES = _vsp_g.XSEC_BOTH_SIDES
r"""Both sides"""
XSEC_LEFT_SIDE = _vsp_g.XSEC_LEFT_SIDE
r"""Left side"""
XSEC_RIGHT_SIDE = _vsp_g.XSEC_RIGHT_SIDE
r"""Right side"""
TRIM_NONE = _vsp_g.TRIM_NONE
r"""No trimming"""
TRIM_X = _vsp_g.TRIM_X
r"""Trim XSec by X"""
TRIM_THICK = _vsp_g.TRIM_THICK
r"""Trim XSec by thickness"""
TRIM_NUM_TYPES = _vsp_g.TRIM_NUM_TYPES
r"""Number of trimming types"""
XSEC_FUSE = _vsp_g.XSEC_FUSE
r"""Fuselage XSec Geom"""
XSEC_STACK = _vsp_g.XSEC_STACK
r"""Stack XSec Geom"""
XSEC_WING = _vsp_g.XSEC_WING
r"""Wing XSec Geom"""
XSEC_CUSTOM = _vsp_g.XSEC_CUSTOM
r"""Custom XSec Geom"""
XSEC_PROP = _vsp_g.XSEC_PROP
r"""Propeller XSec Geom"""
XSEC_NUM_TYPES = _vsp_g.XSEC_NUM_TYPES
r"""Number of XSec types"""
XS_SHIFT_LE = _vsp_g.XS_SHIFT_LE
r"""Shift leading edge"""
XS_SHIFT_MID = _vsp_g.XS_SHIFT_MID

XS_SHIFT_TE = _vsp_g.XS_SHIFT_TE

class ErrorObj(object):
    r"""ErrorObj is defined by an error code enum and associated error string."""

    thisown = property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc="The membership flag")
    __repr__ = _swig_repr

    def __init__(self, *args):
        r"""
        __init__(ErrorObj self) -> ErrorObj
        __init__(ErrorObj self, vsp::ERROR_CODE err_code, string const & err_str) -> ErrorObj
        __init__(ErrorObj self, ErrorObj _from) -> ErrorObj
        """
        _vsp_g.ErrorObj_swiginit(self, _vsp_g.new_ErrorObj(*args))
    __swig_destroy__ = _vsp_g.delete_ErrorObj

    def GetErrorCode(self):
        r"""
        Get the ERROR_CODE enum of the last raised error


        .. code-block:: python

            err = PopLastError()

            if err.GetErrorCode() != vsp.VSP_CANT_FIND_PARM:
                print( "---> Error: API PopLast" )


        See also: ERROR_CODE
        :rtype: int
        :return: ERROR_CODE error code enum
        """
        return _vsp_g.ErrorObj_GetErrorCode(self)

    def GetErrorString(self):
        r"""
        Get the error string of the last raised error


        .. code-block:: python

            #==== Check For API Errors ====##
            while GetNumTotalErrors() > 0:
                err = PopLastError()
                print( err.GetErrorString() )


        :rtype: string
        :return: Error string
        """
        return _vsp_g.ErrorObj_GetErrorString(self)
    m_ErrorCode = property(_vsp_g.ErrorObj_m_ErrorCode_get, _vsp_g.ErrorObj_m_ErrorCode_set, doc=r"""m_ErrorCode : vsp::ERROR_CODE""")
    m_ErrorString = property(_vsp_g.ErrorObj_m_ErrorString_get, _vsp_g.ErrorObj_m_ErrorString_set, doc=r"""m_ErrorString : string""")

    def NoError(self):
        r"""NoError(ErrorObj self)"""
        return _vsp_g.ErrorObj_NoError(self)

# Register ErrorObj in _vsp_g:
_vsp_g.ErrorObj_swigregister(ErrorObj)
class ErrorMgrSingleton(object):
    r"""Proxy of C++ vsp::ErrorMgrSingleton class."""

    thisown = property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc="The membership flag")

    def __init__(self, *args, **kwargs):
        raise AttributeError("No constructor defined")
    __repr__ = _swig_repr

    def GetErrorLastCallFlag(self):
        r"""
        Check if there was an error on the last call to the API


        .. code-block:: python

            #==== Force API to silence error messages ====##
            SilenceErrors()

            #==== Bogus Call To Create API Error ====##
            print( "---> Test Error Handling" )

            SetParmVal( "BogusParmID", 23.0 )

            if not GetErrorLastCallFlag():
                print( "---> Error: API GetErrorLastCallFlag" )

            #==== Tell API to print error messages ====##
            PrintOnErrors()


        :rtype: boolean
        :return: False if no error, true otherwise
        """
        return _vsp_g.ErrorMgrSingleton_GetErrorLastCallFlag(self)

    def GetNumTotalErrors(self):
        r"""
        Count the total number of errors on the stack


        .. code-block:: python

            #==== Force API to silence error messages ====##
            SilenceErrors()

            print( "Creating an API error" )
            SetParmVal( "ABCDEFG", "Test_Name", "Test_Group", 123.4 )

            #==== Check For API Errors ====##
            while GetNumTotalErrors() > 0:
                err = PopLastError()
                print( err.GetErrorString() )

            #==== Tell API to print error messages ====##
            PrintOnErrors()


        :rtype: int
        :return: Number of errors
        """
        return _vsp_g.ErrorMgrSingleton_GetNumTotalErrors(self)

    def PopLastError(self):
        r"""
        Pop (remove) and return the most recent error from the stack. Note, errors are printed on occurrence by default.


        .. code-block:: python

            #==== Force API to silence error messages ====##
            SilenceErrors()

            print( "Creating an API error" )
            SetParmVal( "ABCDEFG", "Test_Name", "Test_Group", 123.4 )

            #==== Check For API Errors ====##
            while GetNumTotalErrors() > 0:
                err = PopLastError()
                print( err.GetErrorString() )

            #==== Tell API to print error messages ====##
            PrintOnErrors()


        :rtype: :py:class:`ErrorObj`
        :return: Error object
        """
        return _vsp_g.ErrorMgrSingleton_PopLastError(self)

    def GetLastError(self):
        r"""
        Return the most recent error from the stack (does NOT pop error off the stack)


        .. code-block:: python

            #==== Force API to silence error messages ====##
            SilenceErrors()

            print( "Creating an API error" )
            SetParmVal( "ABCDEFG", "Test_Name", "Test_Group", 123.4 )

            #==== Check For API Errors ====##
            err = GetLastError()

            print( err.GetErrorString() )

            #==== Tell API to print error messages ====##
            PrintOnErrors()


        See also: SilenceErrors, PrintOnErrors;
        :rtype: :py:class:`ErrorObj`
        :return: Error object
        """
        return _vsp_g.ErrorMgrSingleton_GetLastError(self)

    def PopErrorAndPrint(self, stream):
        r"""PopErrorAndPrint(ErrorMgrSingleton self, FILE * stream) -> bool"""
        return _vsp_g.ErrorMgrSingleton_PopErrorAndPrint(self, stream)

    def SilenceErrors(self):
        r"""
        Prevent errors from printing to stdout as they occur.


        .. code-block:: python

            #==== Force API to silence error messages ====##
            SilenceErrors()

            print( "Creating an API error" )
            SetParmVal( "ABCDEFG", "Test_Name", "Test_Group", 123.4 )

            #==== Tell API to print error messages ====##
            PrintOnErrors()


        See also: PrintOnErrors
        """
        return _vsp_g.ErrorMgrSingleton_SilenceErrors(self)

    def PrintOnErrors(self):
        r"""
        Cause errors to be printed to stdout as they occur.


        .. code-block:: python

            #==== Force API to silence error messages ====##
            SilenceErrors()

            print( "Creating an API error" )
            SetParmVal( "ABCDEFG", "Test_Name", "Test_Group", 123.4 )

            #==== Tell API to print error messages ====##
            PrintOnErrors()


        See also: SilenceErrors
        """
        return _vsp_g.ErrorMgrSingleton_PrintOnErrors(self)

    def AddError(self, code, desc):
        r"""AddError(ErrorMgrSingleton self, vsp::ERROR_CODE code, string const & desc)"""
        return _vsp_g.ErrorMgrSingleton_AddError(self, code, desc)

    def NoError(self):
        r"""NoError(ErrorMgrSingleton self)"""
        return _vsp_g.ErrorMgrSingleton_NoError(self)

    def MessageCallback(self, _from, data):
        r"""MessageCallback(ErrorMgrSingleton self, MessageBase const * _from, MessageData const & data)"""
        return _vsp_g.ErrorMgrSingleton_MessageCallback(self, _from, data)

    @staticmethod
    def getInstance():
        r"""getInstance() -> ErrorMgrSingleton"""
        return _vsp_g.ErrorMgrSingleton_getInstance()

# Register ErrorMgrSingleton in _vsp_g:
_vsp_g.ErrorMgrSingleton_swigregister(ErrorMgrSingleton)

def VSPCheckSetup():
    r"""
    Check if OpenVSP has been initialized successfully. If not, the OpenVSP instance will be exited. This call should be placed at the
    beginning of all API scripts.


    .. code-block:: python


        VSPCheckSetup()

        # Continue to do things...



    """
    return _vsp_g.VSPCheckSetup()

def VSPRenew():
    r"""
    Clear and reinitialize OpenVSP to all default settings


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        SetParmVal( pod_id, "Y_Rel_Location", "XForm", 2.0 )

        VSPRenew()

        if  len(FindGeoms()) != 0 : print( "ERROR: VSPRenew" )


    """
    return _vsp_g.VSPRenew()

def Update(update_managers=True):
    r"""
    Update the entire vehicle and all lower level children. An input, which is true by default, is available to specify
    if managers should be updated as well. The managers are typically updated by their respective GUI, so must be
    updated through the API as well to avoid unexpected behavior.


    .. code-block:: python

        fid = AddGeom( "FUSELAGE", "" )             # Add Fuselage

        xsec_surf = GetXSecSurf( fid, 0 )           # Get First (and Only) XSec Surf

        num_xsecs = GetNumXSec( xsec_surf )

        #==== Set Tan Angles At Nose/Tail
        SetXSecTanAngles( GetXSec( xsec_surf, 0 ), XSEC_BOTH_SIDES, 90, -1.0e12, -1.0e12, -1.0e12 )
        SetXSecTanAngles( GetXSec( xsec_surf, num_xsecs - 1 ), XSEC_BOTH_SIDES, -90, -1.0e12, -1.0e12, -1.0e12 )

        Update()       # Force Surface Update


    :type update_managers: boolean, optional
    :param update_managers: bool Flag to indicate if managers should be updated
    """
    return _vsp_g.Update(update_managers)

def VSPExit(error_code):
    r"""
    Exit the program with a specific error code
    :param [in]: error_code int Error code
    """
    return _vsp_g.VSPExit(error_code)

def VSPCrash(crash_type):
    r"""
    Cause OpenVSP to crash in a variety of ways.
    :param [in]: crash_type int Type of crash to attempt.
    """
    return _vsp_g.VSPCrash(crash_type)

def GetAndResetUpdateCount():
    r"""
    Return the OpenVSP update count and also reset it to zero.

    The OpenVSP update count tracks how many times the GUI has been told to update screens (set to dirty).  It
    provides a simple means of testing whether the OpenVSP state has possibly changed (non-zero returned).

    :rtype: int
    :return: int OpenVSP update count
    """
    return _vsp_g.GetAndResetUpdateCount()

def GetVSPVersion():
    r"""
    Get the version of the OpenVSP instance currently running


    .. code-block:: python

        print( "The current OpenVSP version is: ", False )

        print( GetVSPVersion() )


    :rtype: string
    :return: string OpenVSP version string (i.e. "OpenVSP 3.17.1")
    """
    return _vsp_g.GetVSPVersion()

def GetVSPVersionMajor():
    r"""
    Get the major version of the OpenVSP instance currently running as an integer


    .. code-block:: python

        print( "The current OpenVSP version is: ", False )

        major = GetVSPVersionMajor()
        minor = GetVSPVersionMinor()
        change = GetVSPVersionChange()

        print( f"{major}.{minor}.{change}" )


    :rtype: int
    :return: int OpenVSP major version number (i.e. 3 in 3.X.Y)
    """
    return _vsp_g.GetVSPVersionMajor()

def GetVSPVersionMinor():
    r"""
    Get the minor version of the OpenVSP instance currently running as an integer


    .. code-block:: python

        print( "The current OpenVSP version is: ", False )

        major = GetVSPVersionMajor()
        minor = GetVSPVersionMinor()
        change = GetVSPVersionChange()

        print( f"{major}.{minor}.{change}" )


    :rtype: int
    :return: int OpenVSP minor version number (i.e. X in 3.X.Y)
    """
    return _vsp_g.GetVSPVersionMinor()

def GetVSPVersionChange():
    r"""
    Get the change version of the OpenVSP instance currently running as an integer


    .. code-block:: python

        print( "The current OpenVSP version is: ", False )

        major = GetVSPVersionMajor()
        minor = GetVSPVersionMinor()
        change = GetVSPVersionChange()

        print( f"{major}.{minor}.{change}" )


    :rtype: int
    :return: int OpenVSP change version number (i.e. Y in 3.X.Y)
    """
    return _vsp_g.GetVSPVersionChange()

def GetVSPExePath():
    r"""
    Get the path to the OpenVSP executable. OpenVSP will assume that the VSPAERO, VSPSLICER, and VSPVIEWER are in the same directory unless
    instructed otherwise.


    .. code-block:: python

        print( "The current VSP executable path is: ", False )

        print( GetVSPExePath() )


    See also: SetVSPAEROPath, CheckForVSPAERO, GetVSPAEROPath
    :rtype: string
    :return: string Path to the OpenVSP executable
    """
    return _vsp_g.GetVSPExePath()

def SetVSPAEROPath(path):
    r"""
    Set the path to the VSPAERO executables (Solver, Viewer, and Slicer). By default, OpenVSP will assume that the VSPAERO executables are in the
    same directory as the VSP executable. However, this may need to be changed when using certain API languages like MATLAB and Python. For example,
    Python may treat the location of the Python executable as the VSP executable path, so either the VSPAERO executable needs to be moved to the same
    directory or this function can be called to tell Python where to look for VSPAERO.


    .. code-block:: python

        if  not CheckForVSPAERO( GetVSPExePath() ) :
            vspaero_path = "C:/Users/example_user/Documents/OpenVSP_3.4.5"
            SetVSPAEROPath( vspaero_path )


    See also: GetVSPExePath, CheckForVSPAERO, GetVSPAEROPath
    :param [in]: path string Absolute path to directory containing VSPAERO executable
    :rtype: boolean
    :return: bool Flag that indicates whether or not the path was set correctly
    """
    return _vsp_g.SetVSPAEROPath(path)

def GetVSPAEROPath():
    r"""
    Get the path that OpenVSP will use to look for all VSPAERO executables (Solver, Slicer, and Viewer) when attempting to execute
    VSPAERO. If the VSPAERO executables are not in this location, they must either be copied there or the VSPAERO path must be set
    using SetVSPAEROPath.


    .. code-block:: python

        if  not CheckForVSPAERO( GetVSPAEROPath() ) :
            print( "VSPAERO is not where OpenVSP thinks it is. I should move the VSPAERO executable or call SetVSPAEROPath." )


    See also: GetVSPExePath, CheckForVSPAERO, SetVSPAEROPath
    :rtype: string
    :return: string Path OpenVSP will look for VSPAERO
    """
    return _vsp_g.GetVSPAEROPath()

def CheckForVSPAERO(path):
    r"""
    Check if all VSPAERO executables (Solver, Viewer, and Slicer) are in a given directory. Note that this function will return false
    if only one or two VSPAERO executables are found. An error message will indicate the executables that are missing. This may be
    acceptable, as only the Solver is needed in all cases. The Viewer and Slicer may not be needed.


    .. code-block:: python

        vspaero_path = "C:/Users/example_user/Documents/OpenVSP_3.4.5"

        if  CheckForVSPAERO( vspaero_path ) :
            SetVSPAEROPath( vspaero_path )


    See also: GetVSPExePath, GetVSPAEROPath, SetVSPAEROPath
    :param [in]: path string Absolute path to check for VSPAERO executables
    :rtype: boolean
    :return: bool Flag that indicates if all VSPAERO executables are found or not
    """
    return _vsp_g.CheckForVSPAERO(path)

def SetVSPHelpPath(path):
    r"""
    Set the path to the OpenVSP help files. By default, OpenVSP will assume that the OpenVSP help directory is in the
    same directory as the VSP executable. However, this may need to be changed when using certain API languages like MATLAB and Python. For example,
    Python may treat the location of the Python executable as the VSP executable path, so either the VSPAERO executable needs to be moved to the same
    directory or this function can be called to tell Python where to look for help.


    .. code-block:: python

        if  not CheckForVSPHelp( GetVSPExePath() ) :
            vsphelp_path = "C:/Users/example_user/Documents/OpenVSP_3.4.5/help"
            SetVSPHelpPath( vsphelp_path )


    See also: GetVSPExePath, CheckForVSPHelp, GetVSPHelpPath
    :param [in]: path string Absolute path to directory containing OpenVSP help files
    :rtype: boolean
    :return: bool Flag that indicates whether or not the path was set correctly
    """
    return _vsp_g.SetVSPHelpPath(path)

def GetVSPHelpPath():
    r"""
    Get the path that OpenVSP will use to look for all OpenVSP help files. If the OpenVSP help files are not in this location,
    they must either be copied there or the VSPHelp path must be set using SetVSPHelpPath.


    .. code-block:: python

        if  not CheckForVSPHelp( GetVSPHelpPath() ) :
            print( "VSPAERO is not where OpenVSP thinks it is. I should move the VSPAERO executable or call SetVSPAEROPath." )


    See also: GetVSPExePath, CheckForVSPHelp, SetVSPHelpPath
    :rtype: string
    :return: string Path OpenVSP will look for help files
    """
    return _vsp_g.GetVSPHelpPath()

def CheckForVSPHelp(path):
    r"""
    Check if all OpenVSP help files are in a given directory.


    .. code-block:: python

        vsphelp_path = "C:/Users/example_user/Documents/OpenVSP_3.4.5/help"

        if  CheckForVSPHelp( vsphelp_path ) :
            SetVSPHelpPath( vsphelp_path )


    See also: GetVSPExePath, GetVSPAEROPath, SetVSPHelpPath
    :param [in]: path string Absolute path to check for VSPAERO executables
    :rtype: boolean
    :return: bool Flag that indicates if OpenVSP help files are found or not
    """
    return _vsp_g.CheckForVSPHelp(path)

def RegisterCFDMeshAnalyses():
    r"""RegisterCFDMeshAnalyses()"""
    return _vsp_g.RegisterCFDMeshAnalyses()

def LimitedIntersectSurfaces(geomvec, ptchains, uwchains):
    r"""LimitedIntersectSurfaces(StringVector geomvec, vector< vector< vec3d > > & ptchains, vector< vector< vec3d > > & uwchains)"""
    return _vsp_g.LimitedIntersectSurfaces(geomvec, ptchains, uwchains)

def ReadVSPFile(file_name):
    r"""
    Load an OpenVSP project from a VSP3 file


    .. code-block:: python

        fid = AddGeom( "FUSELAGE", "" )             # Add Fuselage

        fname = "example_fuse.vsp3"

        SetVSP3FileName( fname )

        Update()

        #==== Save Vehicle to File ====//
        print( "\tSaving vehicle file to: ", False )

        print( fname )

        WriteVSPFile( GetVSPFileName(), SET_ALL )

        #==== Reset Geometry ====//
        print( "--->Resetting VSP model to blank slate\n" )

        ClearVSPModel()

        ReadVSPFile( fname )


    :param [in]: file_name string \*.vsp3 file name
    """
    return _vsp_g.ReadVSPFile(file_name)

def WriteVSPFile(*args):
    r"""
    Save the current OpenVSP project to a VSP3 file


    .. code-block:: python

        fid = AddGeom( "FUSELAGE", "" )             # Add Fuselage

        fname = "example_fuse.vsp3"

        SetVSP3FileName( fname )

        Update()

        #==== Save Vehicle to File ====//
        print( "\tSaving vehicle file to: ", False )

        print( fname )

        WriteVSPFile( GetVSPFileName(), SET_ALL )

        #==== Reset Geometry ====//
        print( "--->Resetting VSP model to blank slate\n" )

        ClearVSPModel()

        ReadVSPFile( fname )


    :param [in]: file_name string \*.vsp3 file name
    :param [in]: set int Set index to write (i.e. SET_ALL)
    """
    return _vsp_g.WriteVSPFile(*args)

def SetVSP3FileName(file_name):
    r"""
    Set the file name of a OpenVSP project


    .. code-block:: python

        fid = AddGeom( "FUSELAGE", "" )             # Add Fuselage

        fname = "example_fuse.vsp3"

        SetVSP3FileName( fname )

        Update()

        #==== Save Vehicle to File ====//
        print( "\tSaving vehicle file to: ", False )

        print( fname )

        WriteVSPFile( GetVSPFileName(), SET_ALL )

        #==== Reset Geometry ====//
        print( "--->Resetting VSP model to blank slate\n" )

        ClearVSPModel()

        ReadVSPFile( fname )


    :param [in]: file_name string File name
    """
    return _vsp_g.SetVSP3FileName(file_name)

def GetVSPFileName():
    r"""
    Get the file name of the current OpenVSP project


    .. code-block:: python

        fid = AddGeom( "FUSELAGE", "" )             # Add Fuselage

        fname = "example_fuse.vsp3"

        SetVSP3FileName( fname )

        Update()

        #==== Save Vehicle to File ====//
        print( "\tSaving vehicle file to: ", False )

        print( fname )

        WriteVSPFile( GetVSPFileName(), SET_ALL )


    :rtype: string
    :return: string File name for the current OpenVSP project
    """
    return _vsp_g.GetVSPFileName()

def ClearVSPModel():
    r"""
    Clear the current OpenVSP model


    .. code-block:: python

        fid = AddGeom( "FUSELAGE", "" )             # Add Fuselage

        #==== Reset Geometry ====//
        print( "--->Resetting VSP model to blank slate\n" )
        ClearVSPModel()


    """
    return _vsp_g.ClearVSPModel()

def InsertVSPFile(file_name, parent_geom_id):
    r"""
    Insert an external OpenVSP project into the current project. All Geoms in the external project are placed as children of the specified parent.
    If no parent or an invalid parent is given, the Geoms are inserted at the top level.
    :param [in]: file_name string \*.vsp3 filename
    :param [in]: parent_geom_id string Parent geom ID (ignored with empty string)
    """
    return _vsp_g.InsertVSPFile(file_name, parent_geom_id)

def ExportFile(*args):
    r"""
    Export a file from OpenVSP. Many formats are available, such as STL, IGES, and SVG. If a mesh is generated for a particular export,
    the ID of the MeshGeom will be returned. If no mesh is generated an empty string will be returned.


    .. code-block:: python

        wid = AddGeom( "WING" )             # Add Wing

        ExportFile( "Airfoil_Metadata.csv", SET_ALL, EXPORT_SELIG_AIRFOIL )

        mesh_id = ExportFile( "Example_Mesh.msh", SET_ALL, EXPORT_GMSH )
        DeleteGeom( mesh_id ) # Delete the mesh generated by the GMSH export


    See also: EXPORT_TYPE
    :param [in]: file_name string Export file name
    :param [in]: thick_set int Set index to export (i.e. SET_ALL)
    :param [in]: file_type int File type enum (i.e. EXPORT_IGES)
    :param [in]: subsFlag int Flag to tag subsurfaces if MeshGeom is created
    :param [in]: thin_set int Set index to export as degenerate geometry (i.e. SET_NONE)
    :param [in]: useMode bool Flag determine if mode is used instead of sets
    :param [in]: modeID string ID of Mode to use
    :rtype: string
    :return: string Mesh Geom ID if the export generates a mesh
    """
    return _vsp_g.ExportFile(*args)

def ImportFile(file_name, file_type, parent):
    r"""
    Import a file into OpenVSP. Many formats are available, such as NASCART, V2, and BEM). The imported Geom, mesh, or other object is inserted
    as a child of the specified parent. If no parent or an invalid parent is given, the import will be done at the top level.
    See also: IMPORT_TYPE
    :param [in]: file_name string Import file name
    :param [in]: file_type int File type enum (i.e. IMPORT_PTS)
    :param [in]: parent string Parent Geom ID (ignored with empty string)
    """
    return _vsp_g.ImportFile(file_name, file_type, parent)

def SetBEMPropID(prop_id):
    r"""
    Set the ID of the propeller to be exported to a BEM file. Call this function before ExportFile.


    .. code-block:: python

        #==== Add Prop Geometry ====//
        prop_id = AddGeom( "PROP" )

        SetBEMPropID( prop_id )

        ExportFile( "ExampleBEM.bem", SET_ALL, EXPORT_BEM )


    See also: EXPORT_TYPE, ExportFile
    :param [in]: prop_id string Propeller Geom ID
    """
    return _vsp_g.SetBEMPropID(prop_id)

def ReadApplyDESFile(file_name):
    r"""
    Read in and apply a design file (\*.des) to the current OpenVSP project
    :param [in]: file_name string \*.des input file
    """
    return _vsp_g.ReadApplyDESFile(file_name)

def WriteDESFile(file_name):
    r"""
    Write all design variables to a design file (\*.des)
    :param [in]: file_name string \*.des output file
    """
    return _vsp_g.WriteDESFile(file_name)

def ReadApplyXDDMFile(file_name):
    r"""
    Read in and apply a Cart3D XDDM file (\*.xddm) to the current OpenVSP project
    :param [in]: file_name string \*.xddm input file
    """
    return _vsp_g.ReadApplyXDDMFile(file_name)

def WriteXDDMFile(file_name):
    r"""
    Write all design variables to a Cart3D XDDM file (\*.xddm)
    :param [in]: file_name string \*.xddm output file
    """
    return _vsp_g.WriteXDDMFile(file_name)

def GetNumDesignVars():
    r"""
    Get the number of design variables
    :rtype: int
    :return: int Number of design variables
    """
    return _vsp_g.GetNumDesignVars()

def AddDesignVar(parm_id, type):
    r"""
    Add a design variable
    See also: XDDM_QUANTITY_TYPE
    :param [in]: parm_id string Parm ID
    :param [in]: type int XDDM type enum (XDDM_VAR or XDDM_CONST)
    """
    return _vsp_g.AddDesignVar(parm_id, type)

def DeleteAllDesignVars():
    r"""Delete all design variables"""
    return _vsp_g.DeleteAllDesignVars()

def GetDesignVar(index):
    r"""
    Get the Parm ID of the specified design variable
    :param [in]: index int Index of design variable
    :rtype: string
    :return: string Parm ID
    """
    return _vsp_g.GetDesignVar(index)

def GetDesignVarType(index):
    r"""
    Get the XDDM type of the specified design variable
    See also: XDDM_QUANTITY_TYPE
    :param [in]: index int Index of design variable
    :rtype: int
    :return: int XDDM type enum (XDDM_VAR or XDDM_CONST)
    """
    return _vsp_g.GetDesignVarType(index)

def SetComputationFileName(file_type, file_name):
    r"""
    Get the file name of a specified file type. Note, this function cannot be used to set FEA Mesh file names.


    .. code-block:: python

        #==== Set File Name ====//
        SetComputationFileName( DEGEN_GEOM_CSV_TYPE, "TestDegenScript.csv" )

        #==== Run Degen Geom ====//
        ComputeDegenGeom( SET_ALL, DEGEN_GEOM_CSV_TYPE )


    See also: COMPUTATION_FILE_TYPE, SetFeaMeshFileName
    :param [in]: file_type int File type enum (i.e. CFD_TRI_TYPE, COMP_GEOM_TXT_TYPE)
    :param [in]: file_name string File name
    """
    return _vsp_g.SetComputationFileName(file_type, file_name)

def ComputeMassProps(set, num_slices, idir):
    r"""
    Compute mass properties for the components in the set. Alternatively can be run through the Analysis Manager with 'MassProp'.


    .. code-block:: python

        #==== Test Mass Props ====//
        pid = AddGeom( "POD", "" )

        mesh_id = ComputeMassProps( SET_ALL, 20, X_DIR )

        mass_res_id = FindLatestResultsID( "Mass_Properties" )

        double_arr = GetDoubleResults( mass_res_id, "Total_Mass" )

        if  len(double_arr) != 1 : print( "---> Error: API ComputeMassProps" )


    See also: SetAnalysisInputDefaults, PrintAnalysisInputs, ExecAnalysis
    :param [in]: set int Set index (i.e. SET_ALL)
    :param [in]: num_slices int Number of slices
    :param [in]: idir int Direction of slicing for integration
    :rtype: string
    :return: string MeshGeom ID
    """
    return _vsp_g.ComputeMassProps(set, num_slices, idir)

def ComputeCompGeom(set, half_mesh, file_export_types):
    r"""
    Mesh, intersect, and trim components in the set. Alternatively can be run through the Analysis Manager with 'CompGeom'.


    .. code-block:: python

        #==== Add Pod Geom ====//
        pid = AddGeom( "POD", "" )

        #==== Run CompGeom And Get Results ====//
        mesh_id = ComputeCompGeom( SET_ALL, False, 0 )                      # Half Mesh false and no file export

        comp_res_id = FindLatestResultsID( "Comp_Geom" )                    # Find Results ID

        double_arr = GetDoubleResults( comp_res_id, "Wet_Area" )    # Extract Results


    See also: SetAnalysisInputDefaults, PrintAnalysisInputs, ExecAnalysis, COMPUTATION_FILE_TYPE
    :param [in]: set int Set index (i.e. SET_ALL)
    :param [in]: half_mesh bool Flag to ignore surfaces on the negative side of the XZ plane (e.g. symmetry)
    :param [in]: file_export_types int CompGeom file type to export (supports XOR i.e. COMP_GEOM_CSV_TYPE & COMP_GEOM_TXT_TYPE )
    :rtype: string
    :return: string MeshGeom ID
    """
    return _vsp_g.ComputeCompGeom(set, half_mesh, file_export_types)

def ComputePlaneSlice(set, num_slices, norm, auto_bnd, start_bnd=0, end_bnd=0, measureduct=False):
    r"""
    Slice and mesh the components in the set. Alternatively can be run through the Analysis Manager with 'PlanarSlice'.


    .. code-block:: python

        #==== Add Pod Geom ====//
        pid = AddGeom( "POD", "" )

        #==== Test Plane Slice ====//
        slice_mesh_id = ComputePlaneSlice( 0, 6, vec3d( 0.0, 0.0, 1.0 ), True )

        pslice_results = FindLatestResultsID( "Slice" )

        double_arr = GetDoubleResults( pslice_results, "Slice_Area" )

        if  len(double_arr) != 6 : print( "---> Error: API ComputePlaneSlice" )


    See also: SetAnalysisInputDefaults, PrintAnalysisInputs, ExecAnalysis
    :param [in]: set int Set index (i.e. SET_ALL)
    :param [in]: num_slices int Number of slices
    :param [in]: norm vec3d Normal axis for all slices
    :param [in]: auto_bnd bool Flag to automatically set the start and end bound locations
    :param [in]: start_bnd double Location of the first slice along the normal axis (default: 0.0)
    :param [in]: end_bnd double Location of the last slice along the normal axis (default: 0.0)
    :param [in]: measureduct bool Flag to measure negative area inside positive area (default: false)
    :rtype: string
    :return: string MeshGeom ID
    """
    return _vsp_g.ComputePlaneSlice(set, num_slices, norm, auto_bnd, start_bnd, end_bnd, measureduct)

def ComputeDegenGeom(set, file_export_types):
    r"""
    Compute the degenerate geometry representation for the components in the set. Alternatively can be run through the Analysis Manager with 'DegenGeom' or 'VSPAERODegenGeom'.


    .. code-block:: python

        #==== Set File Name ====//
        SetComputationFileName( DEGEN_GEOM_CSV_TYPE, "TestDegenScript.csv" )

        #==== Run Degen Geom ====//
        ComputeDegenGeom( SET_ALL, DEGEN_GEOM_CSV_TYPE )


    See also: SetAnalysisInputDefaults, PrintAnalysisInputs, ExecAnalysis, COMPUTATION_FILE_TYPE
    :param [in]: set int Set index (i.e. SET_ALL)
    :param [in]: file_export_types int DegenGeom file type to export (supports XOR i.e DEGEN_GEOM_M_TYPE & DEGEN_GEOM_CSV_TYPE)
    """
    return _vsp_g.ComputeDegenGeom(set, file_export_types)

def ComputeCFDMesh(set, degenset, file_export_types):
    r"""
    Create a CFD Mesh for the components in the set. This analysis cannot be run through the Analysis Manager.


    .. code-block:: python

        #==== CFDMesh Method Facet Export =====//
        SetComputationFileName( CFD_FACET_TYPE, "TestCFDMeshFacet_API.facet" )

       print( "\tComputing CFDMesh..." )

        ComputeCFDMesh( SET_ALL, SET_NONE, CFD_FACET_TYPE )


    See also: COMPUTATION_FILE_TYPE
    :param [in]: set int Set index (i.e. SET_ALL)
    :param [in]: degenset int DegenSet index (i.e. SET_NONE)
    :param [in]: file_export_types int CFD Mesh file type to export (supports XOR i.e CFD_SRF_TYPE & CFD_STL_TYPE)
    """
    return _vsp_g.ComputeCFDMesh(set, degenset, file_export_types)

def SetCFDMeshVal(type, val):
    r"""
    Set the value of a specific CFD Mesh option


    .. code-block:: python

        SetCFDMeshVal( CFD_MIN_EDGE_LEN, 1.0 )


    See also: CFD_CONTROL_TYPE
    :param [in]: type int CFD Mesh control type enum (i.e. CFD_GROWTH_RATIO)
    :param [in]: val double Value to set
    """
    return _vsp_g.SetCFDMeshVal(type, val)

def SetCFDWakeFlag(geom_id, flag):
    r"""
    Activate or deactivate the CFD Mesh wake for a particular Geom. Note, the wake flag is only applicable for wing-type surfaces.
    Also, this function is simply an alternative to setting the value of the Parm with the available Parm setting API functions.


    .. code-block:: python

        #==== Add Wing Geom ====//
        wid = AddGeom( "WING", "" )

        SetCFDWakeFlag( wid, True )
        # This is equivalent to SetParmValUpdate( wid, "Wake", "Shape", 1.0 )
        # To change the scale: SetParmValUpdate( wid, "WakeScale", "WakeSettings", 10.0 )
        # To change the angle: SetParmValUpdate( wid, "WakeAngle", "WakeSettings", -5.0 )


    See also: SetParmVal, SetParmValUpdate
    :param [in]: geom_id string Geom ID
    :param [in]: flag bool True to activate, false to deactivate
    """
    return _vsp_g.SetCFDWakeFlag(geom_id, flag)

def DeleteAllCFDSources():
    r"""
    Delete all CFD Mesh sources for all Geoms


    .. code-block:: python

        #==== Add Pod Geom ====//
        pid = AddGeom( "POD", "" )

        AddCFDSource( POINT_SOURCE, pid, 0, 0.25, 2.0, 0.5, 0.5 )      # Add A Point Source

        DeleteAllCFDSources()


    """
    return _vsp_g.DeleteAllCFDSources()

def AddDefaultSources():
    r"""
    Add default CFD Mesh sources for all Geoms


    .. code-block:: python

        #==== Add Pod Geom ====//
        pid = AddGeom( "POD", "" )

        AddDefaultSources() # 3 Sources: Def_Fwd_PS, Def_Aft_PS, Def_Fwd_Aft_LS


    """
    return _vsp_g.AddDefaultSources()

def AddCFDSource(type, geom_id, surf_index, l1, r1, u1, w1, l2=0, r2=0, u2=0, w2=0):
    r"""
    Add a CFD Mesh default source for the indicated Geom. Note, certain input params may not be used depending on the source type


    .. code-block:: python

        #==== Add Pod Geom ====//
        pid = AddGeom( "POD", "" )

        AddCFDSource( POINT_SOURCE, pid, 0, 0.25, 2.0, 0.5, 0.5 )      # Add A Point Source


    See also: CFD_MESH_SOURCE_TYPE
    :param [in]: type int CFD Mesh source type( i.e.BOX_SOURCE )
    :param [in]: geom_id string Geom ID
    :param [in]: surf_index int Main surface index
    :param [in]: l1 double Source first edge length
    :param [in]: r1 double Source first radius
    :param [in]: u1 double Source first U location
    :param [in]: w1 double Source first W location
    :param [in]: l2 double Source second edge length
    :param [in]: r2 double Source second radius
    :param [in]: u2 double Source second U location
    :param [in]: w2 double Source second W location
    """
    return _vsp_g.AddCFDSource(type, geom_id, surf_index, l1, r1, u1, w1, l2, r2, u2, w2)

def GetVSPAERORefWingID():
    r"""
    Get ID of the current VSPAERO reference Geom
    :rtype: string
    :return: string Reference Geom ID
    """
    return _vsp_g.GetVSPAERORefWingID()

def SetVSPAERORefWingID(geom_id):
    r"""
    Set the current VSPAERO reference Geom ID


    .. code-block:: python

        #==== Add Wing Geom and set some parameters =====//
        wing_id = AddGeom( "WING" )

        SetGeomName( wing_id, "MainWing" )

        #==== Add Vertical tail and set some parameters =====//
        vert_id = AddGeom( "WING" )

        SetGeomName( vert_id, "Vert" )

        SetParmValUpdate( vert_id, "TotalArea", "WingGeom", 10.0 )
        SetParmValUpdate( vert_id, "X_Rel_Location", "XForm", 8.5 )
        SetParmValUpdate( vert_id, "X_Rel_Rotation", "XForm", 90 )

        #==== Set VSPAERO Reference lengths & areas ====//
        SetVSPAERORefWingID( wing_id ) # Set as reference wing for VSPAERO

        print( "VSPAERO Reference Wing ID: ", False )

        print( GetVSPAERORefWingID() )


    :param [in]: geom_id string Reference Geom ID
    """
    return _vsp_g.SetVSPAERORefWingID(geom_id)

def GetNumAnalysis():
    r"""
    Get the number of analysis types available in the Analysis Manager


    .. code-block:: python

        nanalysis = GetNumAnalysis()

        print( f"Number of registered analyses: {nanalysis}" )


    :rtype: int
    :return: int Number of analyses
    """
    return _vsp_g.GetNumAnalysis()

def ListAnalysis():
    r"""
    Get the name of every available analysis in the Analysis Manager


    .. code-block:: python

        analysis_array = ListAnalysis()

        print( "List of Available Analyses: " )

        for i in range(int( len(analysis_array) )):

            print( "    " + analysis_array[i] )


    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of analysis names
    """
    return _vsp_g.ListAnalysis()

def GetAnalysisInputNames(analysis):
    r"""
    Get the name of every available input for a particular analysis


    .. code-block:: python

        analysis_name = "VSPAEROComputeGeometry"

        in_names =  GetAnalysisInputNames( analysis_name )

        print("Analysis Inputs: ")

        for i in range(int( len(in_names) )):

            print( ( "\t" + in_names[i] + "\n" ) )


    :param [in]: analysis string Analysis name
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of input names
    """
    return _vsp_g.GetAnalysisInputNames(analysis)

def GetAnalysisDoc(analysis):
    r"""
    Get the analysis documentation string


    .. code-block:: python

        analysis_name = "VSPAEROComputeGeometry"

        doc = GetAnalysisDoc( analysis_name )


    :param [in]: analysis string Analysis name
    :rtype: string
    :return: string Documentation string
    """
    return _vsp_g.GetAnalysisDoc(analysis)

def GetAnalysisInputDoc(analysis, name):
    r"""
    Get the documentation string for the particular analysis and input




    :param [in]: analysis string Analysis name
    :param [in]: name string Input name
    :rtype: string
    :return: string Documentation string
    """
    return _vsp_g.GetAnalysisInputDoc(analysis, name)

def ExecAnalysis(analysis):
    r"""
    Execute an analysis through the Analysis Manager


    .. code-block:: python

        analysis_name = "VSPAEROComputeGeometry"

        res_id = ExecAnalysis( analysis_name )


    :param [in]: analysis string Analysis name
    :rtype: string
    :return: string Result ID
    """
    return _vsp_g.ExecAnalysis(analysis)

def GetNumAnalysisInputData(analysis, name):
    r"""
    Get the documentation string for the particular analysis and input
    :param [in]: analysis string Analysis name
    :param [in]: name string Input name
    :rtype: int
    :return: int Documentation string
    """
    return _vsp_g.GetNumAnalysisInputData(analysis, name)

def GetAnalysisInputType(analysis, name):
    r"""
    Get the data type for a particulat analysis type and input


    .. code-block:: python

        analysis = "VSPAEROComputeGeometry"

        inp_array = GetAnalysisInputNames( analysis )

        for j in range(int( len(inp_array) )):

            typ = GetAnalysisInputType( analysis, inp_array[j] )


    See also: RES_DATA_TYPE
    :param [in]: analysis string Analysis name
    :param [in]: name string Input name
    :rtype: int
    :return: int Data type enum (i.e. DOUBLE_DATA)
    """
    return _vsp_g.GetAnalysisInputType(analysis, name)

def GetIntAnalysisInput(analysis, name, index=0):
    r"""
    Get the current integer values for the particular analysis, input, and data index


    .. code-block:: python

        #==== Analysis: VSPAero Compute Geometry ====//
        analysis_name = "VSPAEROComputeGeometry"

        # Set to panel method
        thick_set = GetIntAnalysisInput( analysis_name, "GeomSet" )
        thin_set = GetIntAnalysisInput( analysis_name, "ThinGeomSet" )

        thick_set = [vsp.SET_NONE]
        thin_set = [vsp.SET_ALL]

        SetIntAnalysisInput( analysis_name, "GeomSet", thick_set )
        SetIntAnalysisInput( analysis_name, "ThinGeomSet", thin_set )


    See also: RES_DATA_TYPE, SetIntAnalysisInput
    :param [in]: analysis string Analysis name
    :param [in]: name string Input name
    :param [in]: index int Data index
    :rtype: std::vector< int,std::allocator< int > >
    :return: vector<int> Array of analysis input values
    """
    return _vsp_g.GetIntAnalysisInput(analysis, name, index)

def GetDoubleAnalysisInput(analysis, name, index=0):
    r"""
    Get the current double values for the particular analysis, input, and data index


    .. code-block:: python

        vinfFCinput = list( GetDoubleAnalysisInput( "ParasiteDrag", "Vinf" ) )

        vinfFCinput[0] = 629

        SetDoubleAnalysisInput( "ParasiteDrag", "Vinf", vinfFCinput )


    See also: RES_DATA_TYPE, SetDoubleAnalysisInput
    :param [in]: analysis string Analysis name
    :param [in]: name string Input name
    :param [in]: index int Data index
    :rtype: std::vector< double,std::allocator< double > >
    :return: vector<double> Array of analysis input values
    """
    return _vsp_g.GetDoubleAnalysisInput(analysis, name, index)

def GetStringAnalysisInput(analysis, name, index=0):
    r"""
    Get the current string values for the particular analysis, input, and data index


    .. code-block:: python

        fileNameInput = GetStringAnalysisInput( "ParasiteDrag", "FileName" )

        fileNameInput = ["ParasiteDragExample"]

        SetStringAnalysisInput( "ParasiteDrag", "FileName", fileNameInput )


    See also: RES_DATA_TYPE, SetStringAnalysisInput
    :param [in]: analysis string Analysis name
    :param [in]: name string Input name
    :param [in]: index int Data index
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of analysis input values
    """
    return _vsp_g.GetStringAnalysisInput(analysis, name, index)

def GetVec3dAnalysisInput(analysis, name, index=0):
    r"""
    Get the current vec3d values for the particular analysis, input, and data index


    .. code-block:: python

        # PlanarSlice
        norm = GetVec3dAnalysisInput( "PlanarSlice", "Norm" )

        norm[0].set_xyz( 0.23, 0.6, 0.15 )

        SetVec3dAnalysisInput( "PlanarSlice", "Norm", norm )


    See also: RES_DATA_TYPE, SetVec3dAnalysisInput
    :param [in]: analysis string Analysis name
    :param [in]: name string Input name
    :param [in]: index int Data index
    :rtype: std::vector< vec3d,std::allocator< vec3d > >
    :return: vector<vec3d> Array of analysis input values
    """
    return _vsp_g.GetVec3dAnalysisInput(analysis, name, index)

def SetAnalysisInputDefaults(analysis):
    r"""
    Set all input values to their defaults for a specific analysis


     .. code-block:: python

         #==== Analysis: VSPAero Compute Geometry ====//
         analysis_name = "VSPAEROComputeGeometry"

         # Set defaults
         SetAnalysisInputDefaults( analysis_name )


     :param [in]: analysis string Analysis name
    """
    return _vsp_g.SetAnalysisInputDefaults(analysis)

def SetIntAnalysisInput(analysis, name, indata, index=0):
    r"""
    Set the value of a particular analysis input of integer type


    .. code-block:: python

        #==== Analysis: VSPAero Compute Geometry ====//
        analysis_name = "VSPAEROComputeGeometry"

        # Set to panel method
        thick_set = GetIntAnalysisInput( analysis_name, "GeomSet" )
        thin_set = GetIntAnalysisInput( analysis_name, "ThinGeomSet" )

        thick_set = [vsp.SET_NONE]
        thin_set = [vsp.SET_ALL]

        SetIntAnalysisInput( analysis_name, "GeomSet", thick_set )
        SetIntAnalysisInput( analysis_name, "ThinGeomSet", thin_set )


    See also: GetIntAnalysisInput
    :param [in]: analysis string Analysis name
    :param [in]: name string Input name
    :param [in]: indata vector<int> Array of integer values to set the input to
    :param [in]: index int Data index
    """
    return _vsp_g.SetIntAnalysisInput(analysis, name, indata, index)

def SetDoubleAnalysisInput(analysis, name, indata, index=0):
    r"""
    Set the value of a particular analysis input of double type


    .. code-block:: python

        #==== Analysis: CpSlicer ====//
        analysis_name = "CpSlicer"

        # Setup cuts
        ycuts = []
        ycuts.append( 2.0 )
        ycuts.append( 4.5 )
        ycuts.append( 8.0 )

        SetDoubleAnalysisInput( analysis_name, "YSlicePosVec", ycuts, 0 )


    See also: GetDoubleAnalysisInput
    :param [in]: analysis string Analysis name
    :param [in]: name string Input name
    :param [in]: indata vector<double> Array of double values to set the input to
    :param [in]: index int Data index
    """
    return _vsp_g.SetDoubleAnalysisInput(analysis, name, indata, index)

def SetStringAnalysisInput(analysis, name, indata, index=0):
    r"""
    Set the value of a particular analysis input of string type


    .. code-block:: python

        fileNameInput = GetStringAnalysisInput( "ParasiteDrag", "FileName" )

        fileNameInput = ["ParasiteDragExample"]

        SetStringAnalysisInput( "ParasiteDrag", "FileName", fileNameInput )


    See also: GetStringAnalysisInput
    :param [in]: analysis string Analysis name
    :param [in]: name string Input name
    :param [in]: indata vector<string> Array of string values to set the input to
    :param [in]: index int Data index
    """
    return _vsp_g.SetStringAnalysisInput(analysis, name, indata, index)

def SetVec3dAnalysisInput(analysis, name, indata, index=0):
    r"""
    Set the value of a particular analysis input of vec3d type


    .. code-block:: python

        # PlanarSlice
        norm = GetVec3dAnalysisInput( "PlanarSlice", "Norm" )

        norm[0].set_xyz( 0.23, 0.6, 0.15 )

        SetVec3dAnalysisInput( "PlanarSlice", "Norm", norm )


    See also: GetVec3dAnalysisInput
    :param [in]: analysis string Analysis name
    :param [in]: name string Input name
    :param [in]: indata vector<vec3d> Array of vec3d values to set the input to
    :param [in]: index int Data index
    """
    return _vsp_g.SetVec3dAnalysisInput(analysis, name, indata, index)

def PrintAnalysisInputs(analysis_name):
    r"""
    Print to stdout all current input values for a specific analysis


    .. code-block:: python

        #==== Analysis: VSPAero Compute Geometry ====//
        analysis_name = "VSPAEROComputeGeometry"

        # list inputs, type, and current values
        PrintAnalysisInputs( analysis_name )


    :param [in]: analysis_name string Name of analysis
    """
    return _vsp_g.PrintAnalysisInputs(analysis_name)

def PrintAnalysisDocs(analysis_name):
    r"""
    Print to stdout all current input documentation for a specific analysis


    .. code-block:: python

        #==== Analysis: VSPAero Compute Geometry ====//
        analysis_name = "VSPAEROComputeGeometry"

        # list inputs, type, and documentation
        PrintAnalysisDocs( analysis_name )


    :param [in]: analysis_name string Name of analysis
    """
    return _vsp_g.PrintAnalysisDocs(analysis_name)

def AddGeometryAnalysis():
    r"""
    Add a new Geometry Analysis case to the Geometry Analysis Manager. The Geometry Analysis Manager
    allows users to configure and execute geometric analysis tasks typical of the aircraft design process,
    such as wetted area, projected area, mass properties, clearance, and visibility analyses.


    .. code-block:: python

        ##==== GeometryAnalysis: Add and configure a case ====##
        ga_id = AddGeometryAnalysis()
        print( "Added Geometry Analysis: ", ga_id )

    See also: DeleteGeometryAnalysis, DeleteAllGeometryAnalyses, GetAllGeometryAnalysesIDVec
    :rtype: string
    :return: string ID of the newly created Geometry Analysis case
    """
    return _vsp_g.AddGeometryAnalysis()

def DeleteGeometryAnalysis(id):
    r"""
    Delete a specific Geometry Analysis case from the Geometry Analysis Manager.


    .. code-block:: python

        ##==== GeometryAnalysis: Delete a specific case ====##
        ga_id = AddGeometryAnalysis()
        DeleteGeometryAnalysis( ga_id )

    See also: AddGeometryAnalysis, DeleteAllGeometryAnalyses, GetAllGeometryAnalysesIDVec
    :param [in]: id string ID of the Geometry Analysis case to delete
    """
    return _vsp_g.DeleteGeometryAnalysis(id)

def DeleteAllGeometryAnalyses():
    r"""
    Delete all Geometry Analysis cases from the Geometry Analysis Manager.


    .. code-block:: python

        ##==== GeometryAnalysis: Delete all cases ====##
        ga_id_1 = AddGeometryAnalysis()
        ga_id_2 = AddGeometryAnalysis()
        DeleteAllGeometryAnalyses()
        ga_ids = GetAllGeometryAnalysesIDVec()
        print( "Number of Geometry Analyses after delete: ", len( ga_ids ) )

    See also: AddGeometryAnalysis, DeleteGeometryAnalysis, GetAllGeometryAnalysesIDVec
    """
    return _vsp_g.DeleteAllGeometryAnalyses()

def GetAllGeometryAnalysesIDVec():
    r"""
    Get a vector of all Geometry Analysis case IDs in the Geometry Analysis Manager.


    .. code-block:: python

        ##==== GeometryAnalysis: List all cases ====##
        ga_id_1 = AddGeometryAnalysis()
        ga_id_2 = AddGeometryAnalysis()
        ga_ids = GetAllGeometryAnalysesIDVec()
        for ga_id in ga_ids:
            print( "Geometry Analysis ID: ", ga_id )

    See also: AddGeometryAnalysis, DeleteGeometryAnalysis, DeleteAllGeometryAnalyses
    :rtype: vector< string >
    :return: vector<string> Array of all Geometry Analysis case IDs
    """
    return _vsp_g.GetAllGeometryAnalysesIDVec()

def SetActiveGeometryAnalysis(id):
    r"""
    Set the active Geometry Analysis case.  The active case is the one drawn in the
    Geometry Analysis GUI (and captured by ScreenGrab).  Setting it does not require the
    GUI to be present.


    .. code-block:: python

        ga_id = AddGeometryAnalysis()
        SetActiveGeometryAnalysis( ga_id )

    See also: GetActiveGeometryAnalysis, AddGeometryAnalysis
    :param [in]: id string Geometry Analysis case ID (empty string for none)
    """
    return _vsp_g.SetActiveGeometryAnalysis(id)

def GetActiveGeometryAnalysis():
    r"""
    Get the ID of the active Geometry Analysis case.


    .. code-block:: python

        ga_id = AddGeometryAnalysis()
        SetActiveGeometryAnalysis( ga_id )
        active = GetActiveGeometryAnalysis()

    See also: SetActiveGeometryAnalysis
    :rtype: string
    :return: string Active Geometry Analysis case ID (empty string if none)
    """
    return _vsp_g.GetActiveGeometryAnalysis()

def MakeMeshGeom(ga_id):
    r"""
    Create a MeshGeom from the results of the specified Geometry Analysis case and return the new Geom's ID.
    The case must have been evaluated first (run the "GeometryAnalysis" analysis for the case) so that its
    result meshes exist.  The resulting MeshGeom is added to the model and made the active Geom.


    .. code-block:: python

        ga_id = AddGeometryAnalysis()
        # ... configure the case's Parms (interference type, primary/secondary geoms or sets, ...) ...

        # Evaluate the case through the Analysis framework so that its result meshes exist.
        SetAnalysisInputDefaults( "GeometryAnalysis" )

        SetStringAnalysisInput( "GeometryAnalysis", "CaseID", [ga_id] )

        ExecAnalysis( "GeometryAnalysis" )

        # Turn the case's result meshes into a MeshGeom.
        mesh_id = MakeMeshGeom( ga_id )

    See also: AddGeometryAnalysis, SetActiveGeometryAnalysis
    :param [in]: ga_id string Geometry Analysis case ID
    :rtype: string
    :return: string Geom ID of the newly created MeshGeom
    """
    return _vsp_g.MakeMeshGeom(ga_id)

def SummarizeAttributes():
    r"""
    Print a tab-delimited summary of all Attributes in the vehicle, denoting Name, Type, Data, Description, and path from Root of vehicle to Attribute


    .. code-block:: python

        ##==== Attributes: SummarizeAttributes ====##
        SummaryText = SummarizeAttributes()
        print( SummaryText )


    :rtype: string
    :return: string Tab-delimited summary of all Attributes in vehicle
    """
    return _vsp_g.SummarizeAttributes()

def SummarizeAttributesAsTree():
    r"""
    Print a plain-text tree summary of all Attribute in the vehicle, each branch node showing the name and ID of the VSP object in the path to the attribute


    .. code-block:: python

        ##==== Attributes: SummarizeAttributesAsTree ====##
        SummaryTextTree = SummarizeAttributesAsTree();
        print( SummaryTextTree )


    :rtype: string
    :return: string Plain-text attribute tree of vehicle
    """
    return _vsp_g.SummarizeAttributesAsTree()

def FindAllAttributes():
    r"""
    Returns a vector of string IDs for all Attributes in the vehicle


    .. code-block:: python

        ##==== Attributes: FindAllAttributes ====##
        AttrIDs = FindAllAttributes()
        for AttrID in AttrIDs:
            print( AttrID )


    :rtype: vector< string >
    :return: vector <string> Vector of All Attribute IDs
    """
    return _vsp_g.FindAllAttributes()

def FindAttributesByName(search_str):
    r"""
    Returns all attributes that contain the string search_str within their name, case insensitive


    .. code-block:: python

        ##==== Attributes: FindAttributesByName ====##
        AttrIDs = FindAttributesByName( "Watermark" )
        for AttrID in AttrIDs:
            print( AttrID )


    :rtype: vector< string >
    :return: vector <string> Vector of string IDs of matching Attributes
    :param [in]: search_str string for filtering attributes in model
    """
    return _vsp_g.FindAttributesByName(search_str)

def FindAttributeByName(search_str, index):
    r"""
    Searches all attributes that contain the search string, case insensitive, and returns the user-specified index


    .. code-block:: python

        ##==== Attributes: FindAttributeByName ====##
        AttrID = FindAttributeByName( "Watermark", 0 )
        print( AttrID )


    :rtype: string
    :return: string Returns a StringID of the attribute indexed/searched by user, if found
    :param [in]: search_str string for filtering attributes in model
    :param [in]: index int for indexing which of the vector of found attributes to select
    """
    return _vsp_g.FindAttributeByName(search_str, index)

def FindAttributeInCollection(obj_id, search_str, index):
    r"""
    Searches all attributes in an OpenVSP object or AttributeCollection that contain the search string, case insensitive, and returns the user-specified index.
    Works either with the ID of an object that contains an attributeCollection or just the ID of an attributeCollection.


    .. code-block:: python

        ##==== Attributes: FindAttributeInCollection ====##
        VehID = GetVehicleID()
        AttrID = FindAttributeInCollection( VehID, 'Watermark', 0 )
        print( AttrID )


    :rtype: string
    :return: string Returns a StringID of the attribute indexed/searched by user, if found
    :param [in]: obj_id string id of object to search within for attributes
    :param [in]: search_str string for filtering attributes in object
    :param [in]: index int for indexing which of the vector of found attributes to select
    """
    return _vsp_g.FindAttributeInCollection(obj_id, search_str, index)

def FindAttributeNamesInCollection(collID):
    r"""
    Return a list of all attribute Names within an attribute collection


    .. code-block:: python

        ##==== Attributes: FindAttributeNamesInCollection ====##
        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        AttrNames = FindAttributeNamesInCollection( CollID )
        for AttrName in AttrNames:
            print( AttrName )


    :rtype: vector< string >
    :return: vector<string> Array of result names
    :param [in]: collID string ID of an attribute collection
    """
    return _vsp_g.FindAttributeNamesInCollection(collID)

def FindAttributesInCollection(collID):
    r"""
    Get all attribute IDs within a single AttributeCollection, referenced by collID


    .. code-block:: python

        ##==== Attributes: FindAttributesInCollection ====##
        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        AttrIDs = FindAttributesInCollection( CollID )
        for AttrID in AttrIDs:
            print( AttrID )


    :rtype: vector< string >
    :return: vector<string> Vector of attribute IDs in an attribute collection.
    :param [in]: collID string ID of an attribute collection
    """
    return _vsp_g.FindAttributesInCollection(collID)

def FindAttributedObjects():
    r"""
    Get array of IDs of all OpenVSP entities that have populated attributeCollections
    Includes attributeGroups


    .. code-block:: python

        ##==== Attributes: FindAttributedObjects ====##
        AttachIDs = FindAttributedObjects()
        for AttachID in AttachIDs:
            print( AttachID )


    :rtype: vector< string >
    :return: vector<string> Array of IDs of entities in OpenVSP that contain populated attribute collections
    """
    return _vsp_g.FindAttributedObjects()

def GetObjectType(attachID):
    r"""
    Get the type of an OpenVSP Entity by ID


    .. code-block:: python

        ##==== Attributes: GetObjectType ====##
        AttachIDs = FindAttributedObjects()
        for AttachID in AttachIDs:
            ObjType = GetObjectType( AttachID )
            print( ObjType )


    :rtype: int
    :return: int return string of object name
    :param [in]: attachID string ID of an OpenVSP object
    """
    return _vsp_g.GetObjectType(attachID)

def GetObjectTypeName(attachID):
    r"""
    Get the named type of an OpenVSP Entity by ID


    .. code-block:: python

        AttachIDs = FindAttributedObjects()
        for AttachID in AttachIDs:
            ObjTypeName = GetObjectTypeName( AttachID )
            print( ObjTypeName )


    :rtype: string
    :return: string return string of object name
    :param [in]: attachID string ID of an OpenVSP object
    """
    return _vsp_g.GetObjectTypeName(attachID)

def GetObjectName(attachID):
    r"""
    Get the name of an OpenVSP Entity by ID


    .. code-block:: python

        ##==== Attributes: GetObjectName ====##
        AttachIDs = FindAttributedObjects()
        for AttachID in AttachIDs:
            ObjName = GetObjectName( AttachID )
            print( ObjName )


    :rtype: string
    :return: string return string of object name
    :param [in]: attachID string ID of an OpenVSP object
    """
    return _vsp_g.GetObjectName(attachID)

def GetObjectParent(id):
    r"""
    Get the string ID of the entity's parent
    Attributes -> Attribute Collections
    Attribute Collections -> Objects that contain attribute Collections
    Geoms->Parent Geoms
    Parms->ParmContainers
    etc.


    .. code-block:: python

        ##==== Attributes: GetObjectParent ====##

        WingID = AddGeom( "WING" )
        PodID = AddGeom( "POD", WingID )
        ParentID = GetObjectParent( PodID )

        if ParentID == WingID:
            print( "Parent of Pod is Wing")

        #Get first attribute in vehicle as an example
        AttrID = FindAllAttributes()[0]
        CollID = GetObjectParent( AttrID )
        CollParentObjID = GetObjectParent( CollID )
        print( CollParentObjID )


    :rtype: string
    :return: string ID of object parent
    """
    return _vsp_g.GetObjectParent(id)

def GetChildCollection(attachID):
    r"""
    Get collection ID from any OpenVSP object
    If ID is an attribute collection, return the same ID back
    If ID is an attribute group, return its nested collection


    .. code-block:: python

        ##==== Attributes: GetChildCollection =====##
        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        print( CollID )



    :rtype: string
    :return: string String ID of attribute collection associated with the attachID
    :param [in]: attachID string ID of an OpenVSP object
    """
    return _vsp_g.GetChildCollection(attachID)

def GetGeomSetCollection(index):
    r"""
    Get collection ID from a vehicle's GeomSet


    .. code-block:: python

        ##==== Attributes: GetGeomSetCollection =====##
        CollID = GetGeomSetCollection( 0 )
        print( CollID )


    :rtype: string
    :return: string String ID of attribute collection associated with the geom set
    :param [in]: index int Geom set
    """
    return _vsp_g.GetGeomSetCollection(index)

def GetAttributeName(attrID):
    r"""
    Return the name of an attribute by its ID


    .. code-block:: python

        ##==== Attributes: GetAttributeName =====##

        AttrIDs = FindAllAttributes()

        for AttrID in AttrIDs:
            AttrName = GetAttributeName( AttrID )
            print( AttrName )


    :param [in]: attrID string ID of an attribute
    :rtype: string
    :return: string name of attribute
    """
    return _vsp_g.GetAttributeName(attrID)

def GetAttributeID(collID, attributeName, index):
    r"""
    Return the ID of an attribute by its name and collection ID


    .. code-block:: python

        ##==== Attributes: GetAttributeID =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        AttrNames = FindAttributeNamesInCollection( CollID )
        for AttrName in AttrNames:
            AttrID = GetAttributeID( CollID, AttrName, 0 )
            print( AttrID )



    :rtype: string
    :return: string String ID of attribute based on collectionID and name
    :param [in]: collID string ID of an attribute collection
    :param [in]: attributeName string name of an attribute in that collection
    :param [in]: index int index of attribute in collection
    """
    return _vsp_g.GetAttributeID(collID, attributeName, index)

def GetAttributeDoc(attrID):
    r"""
    Return string doc of attribute by its ID


    .. code-block:: python

        ##==== Attributes: GetAttributeDoc =====##
        AttrID = FindAllAttributes()[0]
        AttrDoc = GetAttributeDoc(AttrID)
        print( AttrDoc )


    :rtype: string
    :return: string Return string doc of attribute by its ID
    :param [in]: attrID string ID of attribute
    """
    return _vsp_g.GetAttributeDoc(attrID)

def GetAttributeType(attrID):
    r"""
    Get int enum type of attribute by ID
    Use in conjunction with GetAttributeTypeName for getting strings or with the following enums

        BOOL_DATA
        INT_DATA
        DOUBLE_DATA
        STRING_DATA
        VEC3D_DATA
        INT_MATRIX_DATA
        DOUBLE_MATRIX_DATA
        NAMEVAL_COLLECTION_DATA
        ATTR_COLLECTION_DATA



    .. code-block:: python

        ##==== Attributes: GetAttributeType =====##
        AttrID = FindAllAttributes()[0]
        AttrType = GetAttributeType( AttrID )
        print( AttrType )


    :rtype: int
    :return: int Int type of attribute
    :param [in]: attrID string ID of attribute
    """
    return _vsp_g.GetAttributeType(attrID)

def GetAttributeTypeName(attrID):
    r"""
    Get the attribute's type as a string


    .. code-block:: python

        ##==== Attributes: GetAttributeTypeName =====##
        AttrID = FindAllAttributes()[0]
        AttributeTypeName = GetAttributeTypeName( AttrID )
        print( AttributeTypeName )



    :rtype: string
    :return: string Type of attribute as string
    :param [in]: attrID string ID of attribute
    """
    return _vsp_g.GetAttributeTypeName(attrID)

def GetAttributeBoolVal(attrID):
    r"""
    Get the boolean value of a bool-type attribute


    .. code-block:: python

        ##==== Attribute: GetAttributeBoolVal  =====##
        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        InitVal = True
        AttrID = AddAttributeBool( CollID, "TestBoolAttr", InitVal )

        GetVal = GetAttributeBoolVal( AttrID )
        if GetVal[0] == InitVal:
            print( "Got matching Bool Value from Attribute" )
        else:
            print( "GetAttributeBoolVal error!" )


    :rtype: vector< int >
    :return: vector<int> Bool value of attribute
    :param [in]: attrID string ID of attribute
    """
    return _vsp_g.GetAttributeBoolVal(attrID)

def GetAttributeIntVal(attrID):
    r"""
    Get the integer value of an int-type attribute


    .. code-block:: python

        ##==== Attribute: GetAttributeIntVal  =====//
        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        InitVal = 55
        AttrID = AddAttributeInt( CollID, "TestIntAttr", InitVal )

        GetVal = GetAttributeIntVal( AttrID )
        if GetVal[0] == InitVal:
            print( "Got matching Int Value from Attribute" )
        else:
            print( "GetAttributeIntVal error!" )


    :rtype: vector< int >
    :return: vector<int> Int value of attribute
    :param [in]: attrID string ID of attribute
    """
    return _vsp_g.GetAttributeIntVal(attrID)

def GetAttributeDoubleVal(attrID):
    r"""
    Get the double value of a double-type attribute


    .. code-block:: python

        ##==== Attribute: GetAttributeDoubleVal  =====##
        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        InitVal = 3.14159
        AttrID = AddAttributeDouble( CollID, "TestDoubleAttr", InitVal )

        GetVal = GetAttributeDoubleVal( AttrID )
        if GetVal[0] == InitVal:
            print( "Got matching Double Value from Attribute" )
        else:
            print( "GetAttributeDoubleVal error!" )


    :rtype: vector< double >
    :return: vector<double> Double value of attribute
    :param [in]: attrID string ID of attribute
    """
    return _vsp_g.GetAttributeDoubleVal(attrID)

def GetAttributeStringVal(attrID):
    r"""
    Get the string value of a string-type attribute


    .. code-block:: python

        ##==== Attribute: GetAttributeStringVal  =====##
        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        InitVal = "Hello_World_of_Attributes"
        AttrID = AddAttributeString( CollID, "TestStringAttr", InitVal )

        GetVal = GetAttributeStringVal( AttrID )
        if GetVal[0] == InitVal:
            print( "Got matching String Value from Attribute" )
        else:
            print( "GetAttributeStringVal error!" )


    :rtype: vector< string >
    :return: vector<string> String value of attribute
    :param [in]: attrID string ID of attribute
    """
    return _vsp_g.GetAttributeStringVal(attrID)

def GetAttributeParmID(attrID):
    r"""
    Get the parm value of a parm-type attribute


    .. code-block:: python

        ##==== Attribute: GetAttributeParmID  =====##
        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )

        PodID = AddGeom( "POD", "" )
        print( "---> Test Get Parm Val" )
        ParmArray = GetGeomParmIDs( PodID )

        ParmID = ParmArray[0]
        AttrID = AddAttributeParm( CollID, "TestParmAttr", ParmID )

        GetID = GetAttributeParmID( AttrID )

        if GetID[0] == ParmID:
            print( "Got matching Parm ID from Attribute" )
        else:
            print( "GetAttributeParmID error!" )


    :rtype: vector< string >
    :return: vector<string> Parm value of attribute
    :param [in]: attrID string ID of attribute
    """
    return _vsp_g.GetAttributeParmID(attrID)

def GetAttributeParmVal(attrID):
    r"""
    Get the parm value of a parm-type attribute


    .. code-block:: python

        ##==== Attribute: GetAttributeParmVal  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )

        PodID = AddGeom( "POD", "" )
        print( "---> Test Get Parm Val" )
        ParmArray = GetGeomParmIDs( PodID )

        ParmID = ParmArray[0]
        AttrID = AddAttributeParm( CollID, "TestParmAttr", ParmID )

        InitVal = GetParmVal( ParmID )
        GetVal = GetAttributeParmVal( AttrID )

        if GetVal[0] == InitVal:
            print( "Got matching Parm Value from Attribute" )
        else:
            print( "GetAttributeParmVal error!" )



    :rtype: vector< double >
    :return: vector <double> Parm value of attribute
    :param [in]: attrID string ID of attribute
    """
    return _vsp_g.GetAttributeParmVal(attrID)

def GetAttributeParmName(attrID):
    r"""
    Get the name of the referenced parm of a parm-type attribute


    .. code-block:: python

        ##==== Attribute: GetAttributeParmName  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        PodID = AddGeom( "POD", "" )
        print( "---> Test Get Parm Val" )
        ParmArray = GetGeomParmIDs( PodID )
        AttrName = 'Example_Parm_Attr'
        ParmID = ParmArray[0]
        AddAttributeParm( CollID, AttrName, ParmID )
        AttrID = GetAttributeID( CollID, AttrName, 0 )
        ParmName = GetAttributeParmName( AttrID )[0]
        if ParmName == GetParmName( ParmID ):
            print( "Got matching Parm Name from Attribute" )
        else:
            print( "GetAttributeParmName error!" )



    :rtype: vector< string >
    :return: vector <string> Parm name of attribute
    :param [in]: attrID string ID of attribute
    """
    return _vsp_g.GetAttributeParmName(attrID)

def GetAttributeVec3dVal(attrID):
    r"""
    Get the vec3d value of a string-type attribute


    .. code-block:: python

        ##==== Attribute: GetAttributeVec3dVal  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        InitVal = vec3d([1., 0.5, -4.])
        AttrID = AddAttributeVec3d( CollID, "TestVec3dAttr", [InitVal] )

        Vec3dVal = GetAttributeVec3dVal( AttrID )
        if ( Vec3dVal[0].x() == InitVal.x() ) and ( Vec3dVal[0].y() == InitVal.y() ) and ( Vec3dVal[0].z() == InitVal.z() ):
            print( "Got matching Vec3d Value from Attribute" )
        else:
            print( "GetAttributeVec3dVal error!" )


    :rtype: vector< vec3d >
    :return: vector<vec3d> Vec3d value of attribute
    :param [in]: attrID string ID of attribute
    """
    return _vsp_g.GetAttributeVec3dVal(attrID)

def GetAttributeIntMatrixVal(attrID):
    r"""
    Get the Int Matrix of an Int-matrix-type attribute


    .. code-block:: python

        ##==== Attribute: GetAttributeIntMatrixVal  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        InitVal = [[0, 1,],[-4, -1000]]
        AttrID = AddAttributeIntMatrix( CollID, "TestIntMatrixAttr", InitVal )

        IntMatrixVal = GetAttributeIntMatrixVal( AttrID )
        IntMatrixVal = [list(row) for row in IntMatrixVal]

        if IntMatrixVal == InitVal:
            print( "Got matching IntMatrix Value from Attribute" )
        else:
            print( "GetAttributeIntMatrixVal error!" )



    :rtype: vector< vector< int > >
    :return: vector<vector <int\>> Int Matrix value of attribute as vector < vector < int > >
    :param [in]: attrID string ID of attribute
    """
    return _vsp_g.GetAttributeIntMatrixVal(attrID)

def GetAttributeDoubleMatrixVal(attrID):
    r"""
    Get the Double Matrix of an Double-matrix-type attribute


    .. code-block:: python

        ##==== Attribute: GetAttributeDoubleMatrixVal  =====##
        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        InitVal = [[0., 1.,],[-4., -1000.]]
        AttrID = AddAttributeDoubleMatrix( CollID, "TestDoubleMatrixAttr", InitVal )

        DblMatrixVal = GetAttributeDoubleMatrixVal( AttrID )
        DblMatrixVal = [list(row) for row in DblMatrixVal]

        if DblMatrixVal == InitVal:
            print( "Got matching Double Matrix Value from Attribute" )
        else:
            print( "GetAttributeDoubleMatrixVal error!" )


    :rtype: vector< vector< double > >
    :return: vector<vector <double\>> Double Matrix value of attribute as vector < vector < Double > >
    :param [in]: attrID string ID of attribute
    """
    return _vsp_g.GetAttributeDoubleMatrixVal(attrID)

def SetAttributeName(attrID, name):
    r"""
    Set the name of an Attribute by ID


    .. code-block:: python

        ##==== Attribute: SetAttributeName  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        InitVal = "Hello_World_of_Attributes"
        AttrID = AddAttributeString( CollID, "TestStringAttr", InitVal )

        NameString = 'NewName_Example'
        SetAttributeName( AttrID, NameString )
        AttrName = GetAttributeName( AttrID )
        if NameString == AttrName:
            print( "Got matching name from Attribute")
        else:
            print( "SetAttributeName error!" )


    :param [in]: attrID string of attribute ID
    :param [in]: name string name for attribute
    """
    return _vsp_g.SetAttributeName(attrID, name)

def SetAttributeDoc(attrID, doc):
    r"""
    Set the docstring of an Attribute by ID


    .. code-block:: python

        ##==== Attribute: SetAttributeDoc  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        InitVal = "Hello_World_of_Attributes"
        AttrID = AddAttributeString( CollID, "TestStringAttr", InitVal )

        DocString = 'New_docstring_for_attribute'

        SetAttributeDoc( AttrID, DocString )
        NewDocString = GetAttributeDoc( AttrID )
        if NewDocString == DocString:
            print( "Got matching DocString from Attribute")
        else:
            print( "SetAttributeDoc error!" )


    :param [in]: attrID string of attribute ID
    :param [in]: doc string of documentation for attribute
    """
    return _vsp_g.SetAttributeDoc(attrID, doc)

def SetAttributeBool(attrID, value):
    r"""
    Set the Bool value of a bool-type Attribute by ID


    .. code-block:: python

        ##==== Attribute: SetAttributeBool  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        InitVal = True
        AttrID = AddAttributeBool( CollID, "TestBoolAttr", InitVal )

        SetVal = False
        SetAttributeBool( AttrID, SetVal )

        GetVal = GetAttributeBoolVal( AttrID )
        if GetVal[0] == SetVal:
            print( "Set matching Bool Value from Attribute" )
        else:
            print( "SetAttributeBoolVal error!" )


    :param [in]: attrID string of attribute ID
    :param [in]: value bool boolean value for attribute
    """
    return _vsp_g.SetAttributeBool(attrID, value)

def SetAttributeInt(attrID, value):
    r"""
    Set the Int value of an int-type Attribute by ID


    .. code-block:: python

        ##==== Attribute: SetAttributeInt  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        InitVal = 55
        AttrID = AddAttributeInt( CollID, "TestIntAttr", InitVal )

        NewIntVal = -55

        SetAttributeInt( AttrID, NewIntVal )
        GetVal = GetAttributeIntVal( AttrID )
        if GetVal[0] == NewIntVal:
            print( "Set matching Int Value from Attribute" )
        else:
            print( "SetAttributeIntVal error!" )


    :param [in]: attrID string of attribute ID
    :param [in]: value int value for attribute
    """
    return _vsp_g.SetAttributeInt(attrID, value)

def SetAttributeDouble(attrID, value):
    r"""
    Set the Double value of a double-type Attribute by ID


    .. code-block:: python

        ##==== Attribute: SetAttributeDouble  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        InitVal = 3.14159
        AttrID = AddAttributeDouble( CollID, "TestDoubleAttr", InitVal )

        DoubleVal = 3.15

        SetAttributeDouble( AttrID, DoubleVal )

        GetVal = GetAttributeDoubleVal( AttrID )
        if GetVal[0] == DoubleVal:
            print( "Set matching Double Value from Attribute" )
        else:
            print( "SetAttributeDoubleVal error!" )


    :param [in]: attrID string of attribute ID
    :param [in]: value double value for attribute
    """
    return _vsp_g.SetAttributeDouble(attrID, value)

def SetAttributeString(attrID, value):
    r"""
    Set the String value of a string-type Attribute by ID


    .. code-block:: python

        ##==== Attribute: SetAttributeString  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        InitVal = "Hello_World_of_Attributes"
        AttrID = AddAttributeString( CollID, "TestStringAttr", InitVal )

        StringVal = "Du bist supergeil!"
        SetAttributeString( AttrID, StringVal )

        GetVal = GetAttributeStringVal( AttrID )
        if GetVal[0] == StringVal:
            print( "Got matching String Value from Attribute" )
        else:
            print( "GetAttributeStringVal error!" )


    :param [in]: attrID string of attribute ID
    :param [in]: value string value for attribute
    """
    return _vsp_g.SetAttributeString(attrID, value)

def SetAttributeParmID(attrID, value):
    r"""
    Set the ParmID value of a Parm-type Attribute by ID


    .. code-block:: python

        ##==== Attribute: SetAttributeParmID  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )

        PodID = AddGeom( "POD", "" )
        print( "---> Test Get Parm Val" )
        ParmArray = GetGeomParmIDs( PodID )

        ParmID = ParmArray[0]
        AttrID = AddAttributeParm( CollID, "TestParmAttr", ParmID )

        NewParmID = ParmArray[1]
        SetAttributeParmID( AttrID, NewParmID )
        GetID = GetAttributeParmID( AttrID )

        if GetID[0] == NewParmID:
            print( "Set matching Parm ID from Attribute" )
        else:
            print( "SetAttributeParmID error!" )


    :param [in]: attrID string of attribute ID
    :param [in]: value string value for attribute
    """
    return _vsp_g.SetAttributeParmID(attrID, value)

def SetAttributeVec3d(attrID, value):
    r"""
    Set the Vec3d value of a Vec3d-type Attribute by ID


    .. code-block:: python

        ##==== Attribute: SetAttributeVec3d  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        InitVal = vec3d([1., 0.5, -4.])
        AttrID = AddAttributeVec3d( CollID, "TestVec3dAttr", [InitVal] )

        Vec3dVal = vec3d([0.5, 0.75, -0.4])
        SetAttributeVec3d( AttrID, [Vec3dVal] )

        GetVal = GetAttributeVec3dVal( AttrID )
        if ( GetVal[0].x() == Vec3dVal.x() ) and ( GetVal[0].y() == Vec3dVal.y() ) and ( GetVal[0].z() == Vec3dVal.z() ):
            print( "Set matching Vec3d Value from Attribute" )
        else:
            print( "SetAttributeVec3dVal error!" )


    :param [in]: attrID string of attribute ID
    :param [in]: value vec3d value for attribute
    """
    return _vsp_g.SetAttributeVec3d(attrID, value)

def SetAttributeIntMatrix(attrID, value):
    r"""
    Set the int matrix of a int-matrix-type Attribute by ID


    .. code-block:: python

        ##==== Attribute: SetAttributeIntMatrix  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        InitVal = [[0, 1,],[-4, -1000]]
        AttrID = AddAttributeIntMatrix( CollID, "TestIntMatrixAttr", InitVal )

        ImatVal = [[1,5],[-8,0]]
        SetAttributeIntMatrix( AttrID, ImatVal )

        IntMatrixVal = GetAttributeIntMatrixVal( AttrID )
        IntMatrixVal = [list(row) for row in IntMatrixVal]

        if IntMatrixVal == ImatVal:
            print( "Set matching IntMatrix Value from Attribute" )
        else:
            print( "SetAttributeIntMatrixVal error!" )


    :param [in]: attrID string of attribute ID
    :param [in]: value int matrix value for attribute
    """
    return _vsp_g.SetAttributeIntMatrix(attrID, value)

def SetAttributeDoubleMatrix(attrID, value):
    r"""
    Set the double matrix of a double-matrix-type Attribute by ID


    .. code-block:: python

        ##==== Attribute: SetAttributeDoubleMatrix  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        InitVal = [[0., 1.,],[-4., -1000.]]
        AttrID = AddAttributeDoubleMatrix( CollID, "TestDoubleMatrixAttr", InitVal )

        NewDmatVal = [[0.,1.5],[8.4,1.1566]]
        SetAttributeDoubleMatrix( AttrID, NewDmatVal )

        DblMatrixVal = GetAttributeDoubleMatrixVal( AttrID )
        DblMatrixVal = [list(row) for row in DblMatrixVal]

        if DblMatrixVal == NewDmatVal:
            print( "Got matching Double Matrix Value from Attribute" )
        else:
            print( "GetAttributeDoubleMatrixVal error!" )


    :param [in]: attrID string of attribute ID
    :param [in]: value double matrix value for attribute
    """
    return _vsp_g.SetAttributeDoubleMatrix(attrID, value)

def DeleteAttribute(attrID):
    r"""
    Delete attribute by attribute ID


    .. code-block:: python

        ##==== Attribute: DeleteAttribute  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        InitVal = "This_Attribute_Will_Be_Deleted"
        AttrID = AddAttributeString( CollID, "TestStringAttr", InitVal )


        AttrIDs = FindAllAttributes()
        AttrAdded = AttrID in AttrIDs

        DeleteAttribute( AttrID )
        NewAttrIDs = FindAllAttributes()
        AttrDeleted = AttrID not in NewAttrIDs

        if AttrAdded and AttrDeleted:
            print( "Attribute successfully deleted" )
        else:
            print( "DeleteAttribute error!" )


    :param [in]: attrID string of attribute ID
    """
    return _vsp_g.DeleteAttribute(attrID)

def AddAttributeBool(collID, attributeName, value):
    r"""
    Add a boolean attribute by name to an attribute collection


    .. code-block:: python

        ##==== Attribute: AddAttributeBool  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        InitVal = True
        AttrID = AddAttributeBool( CollID, "TestBoolAttr", InitVal )

        GetVal = GetAttributeBoolVal( AttrID )
        if GetVal[0] == InitVal:
            print( "Added Bool Attribute" )
        else:
            print( "AddAttributeBool error!" )


    :param [in]: collID string ID of attribute collection
    :param [in]: attributeName string name of new attribute
    :param [in]: value bool boolean value of new attribute
    """
    return _vsp_g.AddAttributeBool(collID, attributeName, value)

def AddAttributeInt(collID, attributeName, value):
    r"""
    Add a integer attribute by name to an attribute collection


    .. code-block:: python

        ##==== Attribute: AddAttributeInt  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        InitVal = 55
        AttrID = AddAttributeInt( CollID, "TestIntAttr", InitVal )

        GetVal = GetAttributeIntVal( AttrID )
        if GetVal[0] == InitVal:
            print( "Added Int Attribute" )
        else:
            print( "AddAttributeInt error!" )


    :param [in]: collID string ID of attribute collection
    :param [in]: attributeName string name of new attribute
    :param [in]: value int integer value of new attribute
    """
    return _vsp_g.AddAttributeInt(collID, attributeName, value)

def AddAttributeDouble(collID, attributeName, value):
    r"""
    Add a double attribute by name to an attribute collection


    .. code-block:: python

        ##==== Attribute: AddAttributeDouble  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        AttrName = 'Example_Double_Attr'
        DoubleValue = 3.14159
        AttrID = AddAttributeDouble( CollID, AttrName, DoubleValue )

        GetVal = GetAttributeDoubleVal( AttrID )
        if GetVal[0] == DoubleValue:
            print( "Added Double Attribute" )
        else:
            print( "AddAttributeDouble error!" )


    :param [in]: collID string ID of attribute collection
    :param [in]: attributeName string name of new attribute
    :param [in]: value double value of new attribute
    """
    return _vsp_g.AddAttributeDouble(collID, attributeName, value)

def AddAttributeString(collID, attributeName, value):
    r"""
    Add a string attribute by name to an attribute collection


    .. code-block:: python

        ##==== Attribute: AddAttributeString  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        AttrName = 'Example_String_Attr'
        StringValue = 'Example_String_Attr_DataVal'
        AttrID = AddAttributeString( CollID, AttrName, StringValue )

        GetVal = GetAttributeStringVal( AttrID )
        if GetVal[0] == StringValue:
            print( "Added String Attribute" )
        else:
            print( "AddAttributeString error!" )


    :param [in]: collID string ID of attribute collection
    :param [in]: attributeName string name of new attribute
    :param [in]: value string value of new attribute
    """
    return _vsp_g.AddAttributeString(collID, attributeName, value)

def AddAttributeParm(collID, attributeName, parmID):
    r"""
    Add a parm attribute by name to an attribute collection


    .. code-block:: python

        ##==== Attribute: AddAttributeParm  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        pid = AddGeom( "POD", "" )
        print( "---> Test Add Parm Attr" )
        parm_array = GetGeomParmIDs( pid )
        AttrName = 'Example_Parm_Attr'
        ParmID = parm_array[0]
        AttrID = AddAttributeParm( CollID, AttrName, ParmID )

        GetVal = GetAttributeParmID( AttrID )
        if GetVal[0] == ParmID:
            print( "Added Parm Attribute" )
        else:
            print( "AddAttributeParm error!" )



    :param [in]: collID string ID of attribute collection
    :param [in]: attributeName string name of new attribute
    :param [in]: parmID string Parm ID to add to attribute
    """
    return _vsp_g.AddAttributeParm(collID, attributeName, parmID)

def AddAttributeVec3d(collID, attributeName, value):
    r"""
    Add a Vec3d attribute by name to an attribute collection
    use vec3d() to create a vec3d object to pass into the args!


    .. code-block:: python

        ##==== Attribute: AddAttributeVec3d  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        AttrName = 'Example_Vec3D_Attr'
        Vec3dVal = vec3d( 0.5, 0.75, -0.4 )
        AttrID = AddAttributeVec3d( CollID, AttrName, [Vec3dVal] )

        GetVal = GetAttributeVec3dVal( AttrID )
        if ( GetVal[0].x() == Vec3dVal.x() ) and ( GetVal[0].y() == Vec3dVal.y() ) and ( GetVal[0].z() == Vec3dVal.z() ):
            print( "Added Vec3d Attribute" )
        else:
            print( "AddAttributeVec3d error!" )


    :param [in]: collID string ID of attribute collection
    :param [in]: attributeName string name of new attribute
    :param [in]: value vector <vec3d> Vec3d value of new attribute
    """
    return _vsp_g.AddAttributeVec3d(collID, attributeName, value)

def AddAttributeIntMatrix(collID, attributeName, value):
    r"""
    Add an Int Matrix attribute by name to an attribute collection
    use nested vectors/arrays of ints for matrix argument


    .. code-block:: python

        ##==== Attribute: AddAttributeIntMatrix  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        AttrName = 'Example_IntMatrix_Attr'
        IntMatrix = [[1,5],[-8,0]]
        AttrID = AddAttributeIntMatrix( CollID, AttrName, IntMatrix )

        IntMatrixVal = GetAttributeIntMatrixVal( AttrID )
        IntMatrixVal = [list(row) for row in IntMatrixVal]

        if IntMatrixVal == IntMatrix:
            print( "Added IntMatrix Attribute" )
        else:
            print( "AddAttributeIntMatrix error!" )


    :param [in]: collID string ID of attribute collection
    :param [in]: attributeName string name of new attribute
    :param [in]: value int matrix value of new attribute
    """
    return _vsp_g.AddAttributeIntMatrix(collID, attributeName, value)

def AddAttributeDoubleMatrix(collID, attributeName, value):
    r"""
    Add an Double Matrix attribute by name to an attribute collection
    use nested vectors/arrays of ints for matrix argument


    .. code-block:: python

        ##==== Attribute: AddAttributeDoubleMatrix  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        AttrName = 'Example_DoubleMat_Attr'
        DoubleMatrix = [[0.,1.5],[8.4,1.1566]]
        AttrID = AddAttributeDoubleMatrix( CollID, AttrName, DoubleMatrix )

        DoubleMatrixVal = GetAttributeDoubleMatrixVal( AttrID )
        DoubleMatrixVal = [list(row) for row in DoubleMatrixVal]

        if DoubleMatrixVal == DoubleMatrix:
            print( "Added DoubleMatrix Attribute" )
        else:
            print( "AddAttributeDoubleMatrix error!" )


    :param [in]: collID string ID of attribute collection
    :param [in]: attributeName string name of new attribute
    :param [in]: value vector <vector <double>> Double matrix value of new attribute
    """
    return _vsp_g.AddAttributeDoubleMatrix(collID, attributeName, value)

def AddAttributeGroup(collID, attributeName):
    r"""
    Add an empty Attribute Group-type attribute by name to an attribute collection


    .. code-block:: python

        ##==== Attribute: AddAttributeGroup  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        AttrName = 'Example_Attr_Group'
        AttrID = AddAttributeGroup( CollID, AttrName )
        if GetAttributeType( AttrID ) == ATTR_COLLECTION_DATA:
            print( "Added Attribute Group" )
        else:
            print( "AddAttributeGroup error!" )



    :param [in]: collID string ID of attribute collection
    :param [in]: attributeName string name of new attribute group
    """
    return _vsp_g.AddAttributeGroup(collID, attributeName)

def CopyAttribute(attrID):
    r"""
    Copy an attribute to the clipboard by attributeID


    .. code-block:: python

        ##==== Attribute: CopyAttribute  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        AttrName = 'Example_String_Attr'
        StringValue = 'Example_String_Attr_DataVal'
        AttrID = AddAttributeString( CollID, AttrName, StringValue )
        CopyError = CopyAttribute( AttrID )
        if not CopyError:
            print("Successfully copied Attribute")
        else:
            print("CopyAttribute Error!")

    :param [in]: attrID string ID of attribute to be copied
    """
    return _vsp_g.CopyAttribute(attrID)

def CutAttribute(attrID):
    r"""
    Cut an attribute from its collection to the clipboard by attributeID


    .. code-block:: python

        ##==== Attribute: CopyAttribute  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        AttrName = 'Example_String_Attr'
        StringValue = 'Example_String_Attr_DataVal'
        AttrID = AddAttributeString( CollID, AttrName, StringValue )
        CutAttribute( AttrID )

        NewCollID = GetChildCollection( "_AttrWMGroup" )
        NewAttrIDs = PasteAttribute( NewCollID )

        MatchIDs = NewAttrIDs[0] == AttrID
        Attr_Cut_Check = AttrID not in FindAttributesInCollection( CollID )
        if MatchIDs and Attr_Cut_Check:
            print("Successfully cut Attribute")
        else:
            print("CutAttribute Error!")


    :param [in]: attrID string ID of attribute to be copied
    """
    return _vsp_g.CutAttribute(attrID)

def PasteAttribute(coll_id):
    r"""
    Paste the attribute clipboard to the specified objectID
    ObjectID can be any OpenVSP entity that contains a AttributeCollection or simply the attributeCollectionID
    Returns a vector of pasted attributes IDs, if any


    .. code-block:: python

        ##==== Attribute: PasteAttribute  =====##

        VehID = GetVehicleID()
        CollID = GetChildCollection( VehID )
        AttrName = 'Example_String_Attr'
        StringValue = 'Example_String_Attr_DataVal'
        AttrID = AddAttributeString( CollID, AttrName, StringValue )
        CutAttribute( AttrID )

        NewCollID = GetChildCollection( "_AttrWMGroup" )
        NewAttrIDs = PasteAttribute( NewCollID )

        MatchIDs = NewAttrIDs[0] == AttrID
        Attr_Cut_Check = AttrID not in FindAttributesInCollection( CollID )
        Attr_Paste_Check = AttrID in FindAttributesInCollection( NewCollID )
        if MatchIDs and Attr_Cut_Check and Attr_Paste_Check:
            print("Successfully pasted Attribute")
        else:
            print("PasteAttribute Error!")


    :param [in]: coll_id string ID of destination for pasting attribute into
    """
    return _vsp_g.PasteAttribute(coll_id)

def GetAllResultsNames():
    r"""
    Get the name of all results in the Results Manager


    .. code-block:: python

        #==== Write Some Fake Test Results =====//
        WriteTestResults()

        results_array = GetAllResultsNames()

        for i in range(int( len(results_array) )):

            resid = FindLatestResultsID( results_array[i] )
            PrintResults( resid )


    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of result names
    """
    return _vsp_g.GetAllResultsNames()

def GetAllDataNames(results_id):
    r"""
    Get all data names for a particular result


    .. code-block:: python

        #==== Write Some Fake Test Results =====//
        WriteTestResults()

        res_id = FindResultsID( "Test_Results" )

        data_names = GetAllDataNames( res_id )

        if  len(data_names) != 5 : print( "---> Error: API GetAllDataNames" )


    :param [in]: results_id string Result ID
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of result names
    """
    return _vsp_g.GetAllDataNames(results_id)

def GetNumResults(name):
    r"""
    Get the number of results for a particular result name


    .. code-block:: python

        #==== Write Some Fake Test Results =====//
        WriteTestResults()

        if ( GetNumResults( "Test_Results" ) != 2 ): print( "---> Error: API GetNumResults" )


    :param [in]: name string Input name
    :rtype: int
    :return: int Number of results
    """
    return _vsp_g.GetNumResults(name)

def GetResultsName(results_id):
    r"""
    Get the name of a result given its ID


    .. code-block:: python

        #==== Analysis: VSPAero Compute Geometry ====//
        analysis_name = "VSPAEROComputeGeometry"

        # Set defaults
        SetAnalysisInputDefaults( analysis_name )

        res_id = ( ExecAnalysis( analysis_name ) )

        print( "Results Name: ", False )

        print( GetResultsName( res_id ) )


    :param [in]: results_id string Result ID
    :rtype: string
    :return: string Result name
    """
    return _vsp_g.GetResultsName(results_id)

def GetResultsSetDoc(results_id):
    r"""
    Get the documentation string for a result given its ID


    .. code-block:: python

        #==== Analysis: VSPAero Compute Geometry ====//
        analysis_name = "VSPAEROComputeGeometry"

        # Set defaults
        SetAnalysisInputDefaults( analysis_name )

        res_id = ( ExecAnalysis( analysis_name ) )

        print( "Results doc: ", False )

        print( GetResultsSetDoc( res_id ) )


    :param [in]: results_id string Result ID
    :rtype: string
    :return: string Result documentation string
    """
    return _vsp_g.GetResultsSetDoc(results_id)

def GetResultsEntryDoc(results_id, data_name):
    r"""GetResultsEntryDoc(std::string const & results_id, std::string const & data_name) -> std::string"""
    return _vsp_g.GetResultsEntryDoc(results_id, data_name)

def FindResultsID(name, index=0):
    r"""
    Find a results ID given its name and index


    .. code-block:: python

        #==== Write Some Fake Test Results =====//
        WriteTestResults()

        res_id = FindResultsID( "Test_Results" )

        if  len(res_id) == 0 : print( "---> Error: API FindResultsID" )


    :param [in]: name string Result name
    :param [in]: index int Result index
    :rtype: string
    :return: string Result ID
    """
    return _vsp_g.FindResultsID(name, index)

def FindLatestResultsID(name):
    r"""
    Find the latest results ID for particular result name


    .. code-block:: python

        #==== Write Some Fake Test Results =====//
        WriteTestResults()

        results_array = GetAllResultsNames()

        for i in range(int( len(results_array) )):

            resid = FindLatestResultsID( results_array[i] )
            PrintResults( resid )


    :param [in]: name string Result name
    :rtype: string
    :return: string Result ID
    """
    return _vsp_g.FindLatestResultsID(name)

def GetNumData(results_id, data_name):
    r"""
    Get the number of data values for a given result ID and data name


    .. code-block:: python

        #==== Write Some Fake Test Results =====//
        WriteTestResults()

        res_id = FindResultsID( "Test_Results" )

        if ( GetNumData( res_id, "Test_Int" ) != 2 ): print( "---> Error: API GetNumData " )

        int_arr = GetIntResults( res_id, "Test_Int", 0 )

        if  int_arr[0] != 1 : print( "---> Error: API GetIntResults" )

        int_arr = GetIntResults( res_id, "Test_Int", 1 )

        if  int_arr[0] != 2 : print( "---> Error: API GetIntResults" )


    :param [in]: results_id string Result ID
    :param [in]: data_name string Data name
    :rtype: int
    :return: int Number of data values
    """
    return _vsp_g.GetNumData(results_id, data_name)

def GetResultsType(results_id, data_name):
    r"""
    Get the data type for a given result ID and data name


    .. code-block:: python

        #==== Write Some Fake Test Results =====//
        WriteTestResults()

        res_id = FindResultsID( "Test_Results" )

        res_array = GetAllDataNames( res_id )

        for j in range(int( len(res_array) )):

            typ = GetResultsType( res_id, res_array[j] )


    See also: RES_DATA_TYPE
    :param [in]: results_id string Result ID
    :param [in]: data_name string Data name
    :rtype: int
    :return: int Data type enum (i.e. DOUBLE_DATA)
    """
    return _vsp_g.GetResultsType(results_id, data_name)

def GetIntResults(id, name, index=0):
    r"""
    Get all integer values for a particular result, name, and index


    .. code-block:: python

        #==== Write Some Fake Test Results =====//
        WriteTestResults()

        res_id = FindResultsID( "Test_Results" )

        if ( GetNumData( res_id, "Test_Int" ) != 2 ): print( "---> Error: API GetNumData " )

        int_arr = GetIntResults( res_id, "Test_Int", 0 )

        if  int_arr[0] != 1 : print( "---> Error: API GetIntResults" )

        int_arr = GetIntResults( res_id, "Test_Int", 1 )

        if  int_arr[0] != 2 : print( "---> Error: API GetIntResults" )


    :param [in]: id string Result ID
    :param [in]: name string Data name
    :param [in]: index int Data index
    :rtype: std::vector< int,std::allocator< int > >
    :return: vector<int> Array of data values
    """
    return _vsp_g.GetIntResults(id, name, index)

def GetDoubleResults(id, name, index=0):
    r"""
    Get all double values for a particular result, name, and index


    .. code-block:: python

        #==== Add Pod Geom ====//
        pid = AddGeom( "POD", "" )

        #==== Run CompGeom And View Results ====//
        mesh_id = ComputeCompGeom( SET_ALL, False, 0 )                      # Half Mesh false and no file export

        comp_res_id = FindLatestResultsID( "Comp_Geom" )                    # Find Results ID

        double_arr = GetDoubleResults( comp_res_id, "Wet_Area" )    # Extract Results


    :param [in]: id string Result ID
    :param [in]: name string Data name
    :param [in]: index int Data index
    :rtype: std::vector< double,std::allocator< double > >
    :return: vector<double> Array of data values
    """
    return _vsp_g.GetDoubleResults(id, name, index)

def GetDoubleMatResults(id, name, index=0):
    r"""
    Get all matrix (vector<vector<double>>) values for a particular result, name, and index
    :param [in]: id string Result ID
    :param [in]: name string Data name
    :param [in]: index int Data index
    :rtype: std::vector< std::vector< double,std::allocator< double > >,std::allocator< std::vector< double,std::allocator< double > > > >
    :return: vector<vector<double\>> 2D array of data values
    """
    return _vsp_g.GetDoubleMatResults(id, name, index)

def GetStringResults(id, name, index=0):
    r"""
    Get all string values for a particular result, name, and index


    .. code-block:: python

        #==== Write Some Fake Test Results =====//
        WriteTestResults()

        res_id = FindResultsID( "Test_Results" )

        str_arr = GetStringResults( res_id, "Test_String" )

        if ( str_arr[0] != "This Is A Test" ): print( "---> Error: API GetStringResults" )


    :param [in]: id string Result ID
    :param [in]: name string Data name
    :param [in]: index int Data index
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of data values
    """
    return _vsp_g.GetStringResults(id, name, index)

def GetVec3dResults(id, name, index=0):
    r"""
    Get all vec3d values for a particular result, name, and index


    .. code-block:: python

        #==== Write Some Fake Test Results =====//

        tol = 0.00001

        WriteTestResults()

        res_id = FindLatestResultsID( "Test_Results" )

        vec3d_vec = GetVec3dResults( res_id, "Test_Vec3d" )

        print( "X: ", False )
        print( vec3d_vec[0].x(), False )

        print( "\tY: ", False )
        print( vec3d_vec[0].y(), False )

        print( "\tZ: ", False )
        print( vec3d_vec[0].z() )


    :param [in]: id string Result ID
    :param [in]: name string Data name
    :param [in]: index int Data index
    :rtype: std::vector< vec3d,std::allocator< vec3d > >
    :return: vector<vec3d> Array of data values
    """
    return _vsp_g.GetVec3dResults(id, name, index)

def CreateGeomResults(geom_id, name):
    r"""
    Create a new result for a Geom


    .. code-block:: python

        #==== Test Comp Geom ====//
        gid1 = AddGeom( "POD", "" )

        mesh_id = ComputeCompGeom( 0, False, 0 )

        #==== Test Comp Geom Mesh Results ====//
        mesh_geom_res_id = CreateGeomResults( mesh_id, "Comp_Mesh" )

        int_arr = GetIntResults( mesh_geom_res_id, "Num_Tris" )

        if  int_arr[0] < 4 : print( "---> Error: API CreateGeomResults" )


    :param [in]: geom_id string Geom ID
    :param [in]: name string Result name
    :rtype: string
    :return: string Result ID
    """
    return _vsp_g.CreateGeomResults(geom_id, name)

def DeleteAllResults():
    r"""
    Delete all results


    .. code-block:: python

        #==== Test Comp Geom ====//
        gid1 = AddGeom( "POD", "" )

        mesh_id = ComputeCompGeom( 0, False, 0 )

        #==== Test Comp Geom Mesh Results ====//
        mesh_geom_res_id = CreateGeomResults( mesh_id, "Comp_Mesh" )

        DeleteAllResults()

        if ( GetNumResults( "Comp_Mesh" ) != 0 ): print( "---> Error: API DeleteAllResults" )


    """
    return _vsp_g.DeleteAllResults()

def DeleteResult(id):
    r"""
    Delete a particular result


    .. code-block:: python

        #==== Test Comp Geom ====//
        gid1 = AddGeom( "POD", "" )

        mesh_id = ComputeCompGeom( 0, False, 0 )

        #==== Test Comp Geom Mesh Results ====//
        mesh_geom_res_id = CreateGeomResults( mesh_id, "Comp_Mesh" )

        DeleteResult( mesh_geom_res_id )

        if ( GetNumResults( "Comp_Mesh" ) != 0 ): print( "---> Error: API DeleteResult" )


    :param [in]: id string Result ID
    """
    return _vsp_g.DeleteResult(id)

def WriteResultsCSVFile(id, file_name):
    r"""
    Export a result to CSV


    .. code-block:: python

        # Add Pod Geom
        pid = AddGeom( "POD" )

        analysis_name = "VSPAEROComputeGeometry"

        rid = ExecAnalysis( analysis_name )

        WriteResultsCSVFile( rid, "CompGeomRes.csv" )


    :param [in]: id string Rsult ID
    :param [in]: file_name string CSV output file name
    """
    return _vsp_g.WriteResultsCSVFile(id, file_name)

def PrintResults(results_id):
    r"""
    Print a result's name value pairs to stdout


    .. code-block:: python

        # Add Pod Geom
        pid = AddGeom( "POD" )

        analysis_name = "VSPAEROComputeGeometry"

        rid = ExecAnalysis( analysis_name )

        # Get & Display Results
        PrintResults( rid )


    :param [in]: results_id string Result ID
    """
    return _vsp_g.PrintResults(results_id)

def PrintResultsDocs(results_id):
    r"""
    Print a result's names and documentation to stdout


    .. code-block:: python

        # Add Pod Geom
        pid = AddGeom( "POD" )

        analysis_name = "VSPAEROComputeGeometry"

        rid = ExecAnalysis( analysis_name )

        # Get & Display Results Docs
        PrintResultsDocs( rid )


    :param [in]: results_id string Result ID
    """
    return _vsp_g.PrintResultsDocs(results_id)

def WriteTestResults():
    r"""
    Generate some example results for testing.


    .. code-block:: python

        #==== Write Some Fake Test Results =====//
        WriteTestResults()

        results_array = GetAllResultsNames()

        for i in range( len( results_array ) ):
            resid = FindLatestResultsID( results_array[i] )
            PrintResults( resid )


    """
    return _vsp_g.WriteTestResults()

def InitGUI():
    r"""
    Low level routine that should be called to set up GUI before running StartGUI()


    .. code-block:: python


        InitGUI()


    """
    return _vsp_g.InitGUI()

def StartGUI():
    r"""
    Launch the interactive OpenVSP GUI.  In a multi-threaded environment, this must be called from the main thread only.
    This starts the GUI event loop.  It will also show the main screen and screens displayed when StopGUI() was
    previously called.


    .. code-block:: python


        StartGUI()


    """
    return _vsp_g.StartGUI()

def EnableStopGUIMenuItem():
    r"""
    Enable Stop GUI Menu Item from the OpenVSP GUI.

    Typically used for the blocking-mode OpenVSP GUI from the API.

    This will add a "Stop GUI" option to the file pulldown menu and will also cause the exit button on the
    window frame to have the same effect.  When selected, these options will stop the OpenVSP GUI event loop,
    returning control to the API program.  OpenVSP will not terminate, the model will remain in memory and will
    be responsive to subsequent API calls.



    .. code-block:: python


        EnableStopGUIMenuItem()
        StartGUI()



    See also: DisableStopGUIMenuItem
    """
    return _vsp_g.EnableStopGUIMenuItem()

def DisableStopGUIMenuItem():
    r"""
    Disable Stop GUI Menu Item from the OpenVSP GUI.

    This reverses the operation of EnableStopGUIMenuItem.



    .. code-block:: python


        EnableStopGUIMenuItem()
        DisableStopGUIMenuItem()
        StartGUI()



    See also: EnableStopGUIMenuItem
    """
    return _vsp_g.DisableStopGUIMenuItem()

def StopGUI():
    r"""
    Stop OpenVSP GUI event loop and hide screens.  Keep OpenVSP running and in memory.


    .. code-block:: python


        StartGUI()

        StopGUI()

        StartGUI()



    See also: StartGUI
    """
    return _vsp_g.StopGUI()

def PopupMsg(msg):
    r"""
    Cause OpenVSP to display a popup message.


    .. code-block:: python


        StartGUI()

        PopupMsg( "This is a popup message." )



    :param [in]: msg string Message to display.
    """
    return _vsp_g.PopupMsg(msg)

def UpdateGUI():
    r"""
    Tell OpenVSP that the GUI needs to be updated.


    .. code-block:: python


        StartGUI()

        pod_id = AddGeom( "POD" )

        length = FindParm( pod_id, "Length", "Design" )

        SetParmVal( length, 13.0 )

        UpdateGUI()



    See also: StartGUI
    """
    return _vsp_g.UpdateGUI()

def IsGUIBuild():
    r"""
    Test if the current OpenVSP build includes graphics capabilities.


    .. code-block:: python


        if ( IsGUIBuild() ):
            print( "OpenVSP build is graphics capable." )
        else:
            print( "OpenVSP build is not graphics capable." )



    :rtype: boolean
    :return: bool True if the current OpenVSP build includes graphics capabilities.  False otherwise.
    """
    return _vsp_g.IsGUIBuild()

def Lock():
    r"""
    Obtain the lock on the OpenVSP GUI event loop.  This will prevent the interactive GUI from
    updating or accepting user input until the lock is released -- thereby allowing longer-time
    commands including analyses to execute without the chance of the OpenVSP state changing during
    execution.



    .. code-block:: python


        StartGUI()

        pod_id = AddGeom( "POD" )

        Lock()
        rid = ExecAnalysis( "CompGeom" )

        mesh_id_vec = GetStringResults( rid, "Mesh_GeomID" )

        DeleteGeomVec( mesh_id_vec )
        Unlock()



    See also: Unlock
    """
    return _vsp_g.Lock()

def Unlock():
    r"""
    Release the lock on the OpenVSP GUI event loop.



    .. code-block:: python


        StartGUI()

        pod_id = AddGeom( "POD" )

        Lock()
        rid = ExecAnalysis( "CompGeom" )

        mesh_id_vec = GetStringResults( rid, "Mesh_GeomID" )

        DeleteGeomVec( mesh_id_vec )
        Unlock()



    See also: Lock
    """
    return _vsp_g.Unlock()

def IsEventLoopRunning():
    r"""
    Test if the OpenVSP GUI event loop is running.



    .. code-block:: python


        StartGUI()

        if ( IsEventLoopRunning() ):
            print( "Event loop is running." )


    :rtype: boolean
    :return: bool True if the OpenVSP GUI event loop is running.  False otherwise.
    """
    return _vsp_g.IsEventLoopRunning()

def ScreenGrab(fname, w, h, transparentBG, autocrop=False):
    r"""
    Capture the specified screen and save to file. Note, VSP_USE_FLTK must be defined


    .. code-block:: python

        screenw = 2000                                             # Set screenshot width and height
        screenh = 2000

        fname = "test_screen_grab.png"

        ScreenGrab( fname, screenw, screenh, True, True )                # Take PNG screenshot


    :param [in]: fname string Output file name
    :param [in]: w int Width of screen grab
    :param [in]: h int Height of screen grab
    :param [in]: transparentBG bool Transparent background flag
    :param [in]: autocrop bool Automatically crop transparent background flag
    """
    return _vsp_g.ScreenGrab(fname, w, h, transparentBG, autocrop)

def SetViewAxis(vaxis):
    r"""
    Toggle viewing the axis


    .. code-block:: python

        SetViewAxis( False )                                           # Turn off axis marker in corner of viewscreen


    :param [in]: vaxis bool True to show the axis, false to hide the axis
    """
    return _vsp_g.SetViewAxis(vaxis)

def SetShowBorders(brdr):
    r"""
    Toggle viewing the border frame


    .. code-block:: python

        SetShowBorders( False )                                        # Turn off red/black border on active window


    :param [in]: brdr bool True to show the border frame, false to hide the border frame
    """
    return _vsp_g.SetShowBorders(brdr)

def SetGeomDrawType(geom_id, type):
    r"""
    Set the draw type of the specified geometry


    .. code-block:: python

        pid = AddGeom( "POD", "" )                             # Add Pod for testing

        SetGeomDrawType( pid, GEOM_DRAW_SHADE )                       # Make pod appear as shaded


    See also: DRAW_TYPE
    :param [in]: geom_id string Geom ID
    :param [in]: type int Draw type enum (i.e. GEOM_DRAW_SHADE)
    """
    return _vsp_g.SetGeomDrawType(geom_id, type)

def SetGeomWireColor(geom_id, r, g, b):
    r"""
    Set the wireframe color of the specified geometry


    .. code-block:: python

        pid = AddGeom( "POD", "" )

        SetGeomWireColor( pid, 0, 0, 255 )


    :param [in]: geom_id string Geom ID
    :param [in]: r int Red component of color [0, 255]
    :param [in]: g int Green component of color [0, 255]
    :param [in]: b int Blue component of color [0, 255]
    """
    return _vsp_g.SetGeomWireColor(geom_id, r, g, b)

def SetGeomDisplayType(geom_id, type):
    r"""
    Set the display type of the specified geometry


    .. code-block:: python

        pid = AddGeom( "POD" )                             # Add Pod for testing

        SetGeomDisplayType( pid, DISPLAY_DEGEN_PLATE )                       # Make pod appear as Bezier plate (Degen Geom)


    See also: DISPLAY_TYPE
    :param [in]: geom_id string Geom ID
    :param [in]: type int Display type enum (i.e. DISPLAY_BEZIER)
    """
    return _vsp_g.SetGeomDisplayType(geom_id, type)

def SetGeomMaterialName(geom_id, name):
    r"""
    Set the visualization material the specified geometry


    .. code-block:: python

        pid = AddGeom( "POD" )

        SetGeomMaterialName( pid, "Ruby" )

    :param [in]: geom_id string Geom ID
    :param [in]: name string Material name
    """
    return _vsp_g.SetGeomMaterialName(geom_id, name)

def AddMaterial(name, ambient, diffuse, specular, emissive, alpha, shininess):
    r"""
    Set the visualization material the specified geometry


    .. code-block:: python

        pid = AddGeom( "POD" )

        AddMaterial( "RedGlass", vec3d( 44, 2, 2 ), vec3d( 156, 10, 10 ), vec3d( 185, 159, 159 ), vec3d( 44, 2, 2 ), 30, 0.4 )

        SetGeomMaterialName( pid, "RedGlass" )

    :param [in]: name string Material name
    :param [in]: ambient vec3d Ambient color RGB triple on scale [0, 255]
    :param [in]: diffuse vec3d Diffuse color RGB triple on scale [0, 255]
    :param [in]: specular vec3d Specular color RGB triple on scale [0, 255]
    :param [in]: emissive vec3d Emissive color RGB triple on scale [0, 255]
    :param [in]: shininess double Shininess exponent on scale [0, 127]
    :param [in]: alpha double Transparency factor on scale [0, 1]
    """
    return _vsp_g.AddMaterial(name, ambient, diffuse, specular, emissive, alpha, shininess)

def GetMaterialNames():
    r"""
    Get the names of all visualization materials


    .. code-block:: python

        mat_array = GetMaterialNames()

        for i in range(int( len(mat_array) )):
            print( mat_array[i] )


    :rtype: vector< string >
    :return: vector<string> Array of material names
    """
    return _vsp_g.GetMaterialNames()

def SetBackground(r, g, b):
    r"""
    Set the background color


    .. code-block:: python

        SetBackground( 1.0, 1.0, 1.0 )                                 # Set background to bright white


    :param [in]: r double Red 8-bit unsigned integer (range: 0-255)
    :param [in]: g double Green 8-bit unsigned integer (range: 0-255)
    :param [in]: b double Blue 8-bit unsigned integer (range: 0-255)
    """
    return _vsp_g.SetBackground(r, g, b)

def SetAllViews(view):
    r"""
    Set the view of all viewports


    .. code-block:: python

        SetAllViews( CAM_CENTER )


    :param [in]: view int CAMERA_VIEW enum
    """
    return _vsp_g.SetAllViews(view)

def SetView(viewport, view):
    r"""
    Set the view of a particular viewports


    .. code-block:: python

        SetView( 0, CAM_CENTER )


    :param [in]: viewport int Viewport to set view
    :param [in]: view int CAMERA_VIEW enum
    """
    return _vsp_g.SetView(viewport, view)

def FitAllViews():
    r"""
    Fit contents to all viewports


    .. code-block:: python

        FitAllViews()


    """
    return _vsp_g.FitAllViews()

def ResetViews():
    r"""
    Reset views of all viewports


    .. code-block:: python

        ResetViews()


    """
    return _vsp_g.ResetViews()

def SetWindowLayout(r, c):
    r"""
    Set the rows and columns of the window layout


    .. code-block:: python

        SetWindowLayout( 2, 2 )


    :param [in]: r int Number of viewport rows
    :param [in]: c int Number of viewport columns
    """
    return _vsp_g.SetWindowLayout(r, c)

def SetGUIElementDisable(e, state):
    r"""
    Set whether all instances of GUI device type are disabled


    .. code-block:: python

        SetGUIElementDisable( GDEV_INPUT, True )

    :param [in]: e int GDEV enum for GUI device type
    :param [in]: state bool True to disable GUI device type
    """
    return _vsp_g.SetGUIElementDisable(e, state)

def SetGUIScreenDisable(s, state):
    r"""
    Set whether screen is disabled


    .. code-block:: python

        SetGUIScreenDisable( VSP_CFD_MESH_SCREEN, True )

    :param [in]: s int GUI_VSP_SCREEN enum for screen
    :param [in]: state bool True to disable screen
    """
    return _vsp_g.SetGUIScreenDisable(s, state)

def SetGeomScreenDisable(s, state):
    r"""
    Set whether geom screen is disabled


    .. code-block:: python

        SetGeomScreenDisable( ALL_GEOM_SCREENS, True )

    :param [in]: s int GUI_GEOM_SCREEN enum for geom screen
    :param [in]: state bool True to disable geom screen
    """
    return _vsp_g.SetGeomScreenDisable(s, state)

def HideScreen(s):
    r"""
    Hide an OpenVSP GUI screen


    .. code-block:: python

        HideScreen( VSP_CFD_MESH_SCREEN )

    :param [in]: s int GUI_VSP_SCREEN enum for screen
    """
    return _vsp_g.HideScreen(s)

def ShowScreen(s):
    r"""
    Show an OpenVSP GUI screen


    .. code-block:: python

        ShowScreen( VSP_CFD_MESH_SCREEN )

    :param [in]: s int GUI_VSP_SCREEN enum for screen
    """
    return _vsp_g.ShowScreen(s)

def GetGeomTypes():
    r"""
    Get an array of all Geom types (i.e FUSELAGE, POD, etc.)


    .. code-block:: python

        #==== Add Pod Geometries ====//
        pod1 = AddGeom( "POD", "" )
        pod2 = AddGeom( "POD", "" )

        type_array = GetGeomTypes()

        if ( type_array[0] != "POD" ): print( "---> Error: API GetGeomTypes  " )


    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of Geom type names
    """
    return _vsp_g.GetGeomTypes()

def AddGeom(*args):
    r"""
    Add a new Geom of given type as a child of the specified parent. If no parent or an invalid parent is given, the Geom is placed at the top level


    .. code-block:: python

        #==== Add Wing Geometry ====//
        wing_id = AddGeom( "WING" )


    :param [in]: type string Geom type (i.e FUSELAGE, POD, etc.)
    :param [in]: parent string Parent Geom ID
    :rtype: string
    :return: string Geom ID
    """
    return _vsp_g.AddGeom(*args)

def UpdateGeom(geom_id):
    r"""
    Perform an update for the specified Geom


    .. code-block:: python

        #==== Add Wing Geometry ====//
        wing_id = AddGeom( "WING" )

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        SetParmVal( pod_id, "X_Rel_Location", "XForm", 5.0 )

        UpdateGeom( pod_id ) # Faster than updating the whole vehicle


    See also: Update()
    :param [in]: geom_id string Geom ID
    """
    return _vsp_g.UpdateGeom(geom_id)

def DeleteGeom(geom_id):
    r"""
    Delete a particular Geom


    .. code-block:: python

        #==== Add Wing Geometry ====//
        wing_id = AddGeom( "WING" )

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        DeleteGeom( wing_id )


    :param [in]: geom_id string Geom ID
    """
    return _vsp_g.DeleteGeom(geom_id)

def DeleteGeomVec(del_vec):
    r"""
    Delete multiple Geoms


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pid = AddGeom( "POD", "" )

        rid = ExecAnalysis( "CompGeom" )

        mesh_id_vec = GetStringResults( rid, "Mesh_GeomID" )

        DeleteGeomVec( mesh_id_vec )


    :param [in]: del_vec vector<string> Vector of Geom IDs
    """
    return _vsp_g.DeleteGeomVec(del_vec)

def CutGeomToClipboard(geom_id):
    r"""
    Cut Geom from current location and store on clipboard


    .. code-block:: python

        #==== Add Pod Geometries ====//
        pid1 = AddGeom( "POD", "" )
        pid2 = AddGeom( "POD", "" )

        CutGeomToClipboard( pid1 )

        PasteGeomClipboard( pid2 ) # Paste Pod 1 as child of Pod 2

        geom_ids = FindGeoms()

        if  len(geom_ids) != 2 : print( "---> Error: API Cut/Paste Geom  " )


    See also: PasteGeomClipboard
    :param [in]: geom_id string Geom ID
    """
    return _vsp_g.CutGeomToClipboard(geom_id)

def CopyGeomToClipboard(geom_id):
    r"""
    Copy Geom from current location and store on clipboard


    .. code-block:: python

        #==== Add Pod Geometries ====//
        pid1 = AddGeom( "POD", "" )
        pid2 = AddGeom( "POD", "" )

        CopyGeomToClipboard( pid1 )

        PasteGeomClipboard( pid2 ) # Paste Pod 1 as child of Pod 2

        geom_ids = FindGeoms()

        if  len(geom_ids) != 3 : print( "---> Error: API Copy/Paste Geom  " )


    See also: PasteGeomClipboard
    :param [in]: geom_id string Geom ID
    """
    return _vsp_g.CopyGeomToClipboard(geom_id)

def PasteGeomClipboard(*args):
    r"""
    Paste Geom from clipboard into the model. The Geom is pasted as a child of the specified parent, but will be placed at top level if no parent or an invalid one is provided.


    .. code-block:: python

        #==== Add Pod Geometries ====//
        pid1 = AddGeom( "POD", "" )
        pid2 = AddGeom( "POD", "" )

        CutGeomToClipboard( pid1 )

        PasteGeomClipboard( pid2 ) # Paste Pod 1 as child of Pod 2

        geom_ids = FindGeoms()

        if  len(geom_ids) != 2 : print( "---> Error: API Cut/Paste Geom  " )


    :param [in]: parent string Parent Geom ID
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Vector of pasted Geom IDs
    """
    return _vsp_g.PasteGeomClipboard(*args)

def FindGeoms():
    r"""
    Find and return all Geom IDs in the model


    .. code-block:: python

        #==== Add Pod Geometries ====//
        pod1 = AddGeom( "POD", "" )
        pod2 = AddGeom( "POD", "" )

        #==== There Should Be Two Geoms =====//
        geom_ids = FindGeoms()

        if  len(geom_ids) != 2 : print( "---> Error: API FindGeoms " )


    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of all Geom IDs
    """
    return _vsp_g.FindGeoms()

def FindGeomsWithName(name):
    r"""
    Find and return all Geom IDs with the specified name


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pid = AddGeom( "POD", "" )

        SetGeomName( pid, "ExamplePodName" )

        geom_ids = FindGeomsWithName( "ExamplePodName" )

        if  len(geom_ids) != 1 :
            print( "---> Error: API FindGeomsWithName " )


    See also: FindGeom
    :param [in]: name string Geom name
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of Geom IDs
    """
    return _vsp_g.FindGeomsWithName(name)

def FindGeom(name, index):
    r"""
    Find and return the Geom ID with the specified name at given index. Equivalent to FindGeomsWithName( name )[index].


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pid = AddGeom( "POD", "" )

        SetGeomName( pid, "ExamplePodName" )

        geom_id = FindGeom( "ExamplePodName", 0 )

        geom_ids = FindGeomsWithName( "ExamplePodName" )

        if  geom_ids[0] != geom_id :
            print( "---> Error: API FindGeom & FindGeomsWithName" )


    See also: FindGeomsWithName
    :param [in]: name string Geom name
    :param [in]: index
    :rtype: string
    :return: string Geom ID with name at specified index
    """
    return _vsp_g.FindGeom(name, index)

def SetGeomName(geom_id, name):
    r"""
    Set the name of the specified Geom


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pid = AddGeom( "POD", "" )

        SetGeomName( pid, "ExamplePodName" )

        geom_ids = FindGeomsWithName( "ExamplePodName" )

        if  len(geom_ids) != 1 :
            print( "---> Error: API FindGeomsWithName " )


    :param [in]: geom_id string Geom ID
    :param [in]: name string Geom name
    """
    return _vsp_g.SetGeomName(geom_id, name)

def GetGeomName(geom_id):
    r"""
    Get the name of a specific Geom


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pid = AddGeom( "POD", "" )

        SetGeomName( pid, "ExamplePodName" )

        name_str = "Geom Name: " + GetGeomName( pid )

        print( name_str )


    :param [in]: geom_id string Geom ID
    :rtype: string
    :return: string Geom name
    """
    return _vsp_g.GetGeomName(geom_id)

def GetGeomParmIDs(geom_id):
    r"""
    Get all Parm IDs associated with this Geom Parm container


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pid = AddGeom( "POD", "" )

        print( "---> Test Get Parm Arrays" )

        parm_array = GetGeomParmIDs( pid )

        if  len(parm_array) < 1 : print( "---> Error: API GetGeomParmIDs " )


    :param [in]: geom_id string Geom ID
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of Parm IDs
    """
    return _vsp_g.GetGeomParmIDs(geom_id)

def GetGeomTypeName(geom_id):
    r"""
    Get the type name of specified Geom (i.e. FUSELAGE)


    .. code-block:: python

        #==== Add Wing Geometry ====//
        wing_id = AddGeom( "WING" )

        print( "Geom Type Name: ", False )

        print( GetGeomTypeName( wing_id ) )


    :param [in]: geom_id string Geom ID
    :rtype: string
    :return: string Geom type name
    """
    return _vsp_g.GetGeomTypeName(geom_id)

def GetParm(geom_id, name, group):
    r"""
    Get Parm ID


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pid = AddGeom( "POD" )

        lenid = GetParm( pid, "Length", "Design" )

        if  not ValidParm( lenid ) : print( "---> Error: API GetParm  " )


    :param [in]: geom_id string Geom ID
    :param [in]: name string Parm name
    :param [in]: group string Parm group name
    :rtype: string
    :return: string Parm ID
    """
    return _vsp_g.GetParm(geom_id, name, group)

def SetGeomParent(geom_id, parent_id):
    r"""
    Get the parent Geom ID for the input child Geom. "NONE" is returned if the Geom has no parent.


    .. code-block:: python

        #==== Reparent two PodGeoms ====#
        pod1 = AddGeom( "POD" )
        pod2 = AddGeom( "POD", pod1 )
        pod3 = AddGeom ("POD" )

        veh_id = GetVehicleID()

        SetGeomParent( pod2, veh_id )
        SetGeomParent( pod3, pod1 )

        pod2_parent = GetGeomParent( pod2 )
        pod3_parent = GetGeomParent( pod3 )

        if ( pod2_parent != "NONE" or pod3_parent != pod1 ):
            print( "SetGeomParent error!" )


    :param [in]: geom_id string Geom ID
    :param [in]: parent_id string Parent Geom ID
    """
    return _vsp_g.SetGeomParent(geom_id, parent_id)

def GetGeomParent(geom_id):
    r"""
    Get the parent Geom ID for the input child Geom. "NONE" is returned if the Geom has no parent.


    .. code-block:: python

        #==== Add Parent and Child Geometry ====//
        pod1 = AddGeom( "POD" )

        pod2 = AddGeom( "POD", pod1 )

        print( "Parent ID of Pod #2: ", False )

        print( GetGeomParent( pod2 ) )


    :param [in]: geom_id string Geom ID
    :rtype: string
    :return: string Parent Geom ID
    """
    return _vsp_g.GetGeomParent(geom_id)

def GetGeomChildren(geom_id):
    r"""
    Get the IDs for each child of the input parent Geom.


    .. code-block:: python

        #==== Add Parent and Child Geometry ====//
        pod1 = AddGeom( "POD" )

        pod2 = AddGeom( "POD", pod1 )

        pod3 = AddGeom( "POD", pod2 )

        print( "Children of Pod #1: " )

        children = GetGeomChildren( pod1 )

        for i in range(int( len(children) )):

            print( "\t", False )
            print( children[i] )


    :param [in]: geom_id string Geom ID
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Vector of child Geom IDs
    """
    return _vsp_g.GetGeomChildren(geom_id)

def GetNumXSecSurfs(geom_id):
    r"""
    Get the number of XSecSurfs for the specified Geom


    .. code-block:: python

        #==== Add Fuselage Geometry ====//
        fuseid = AddGeom( "FUSELAGE", "" )

        num_xsec_surfs = GetNumXSecSurfs( fuseid )

        if  num_xsec_surfs != 1 : print( "---> Error: API GetNumXSecSurfs  " )


    :param [in]: geom_id string Geom ID
    :rtype: int
    :return: int Number of XSecSurfs
    """
    return _vsp_g.GetNumXSecSurfs(geom_id)

def GetNumMainSurfs(geom_id):
    r"""
    Get the number of main surfaces for the specified Geom. Multiple main surfaces may exist for CustoGeoms, propellors, etc., but
    does not include surfaces created due to symmetry.


    .. code-block:: python

        #==== Add Prop Geometry ====//
        prop_id = AddGeom( "PROP" )

        num_surf = 0

        num_surf = GetNumMainSurfs( prop_id ) # Should be the same as the number of blades

        print( "Number of Propeller Surfaces: ", False )

        print( num_surf )


    :param [in]: geom_id string Geom ID
    :rtype: int
    :return: int Number of main surfaces
    """
    return _vsp_g.GetNumMainSurfs(geom_id)

def GetTotalNumSurfs(geom_id):
    r"""
    Get the total number of surfaces for the specified Geom. This is equivalent to the number of main surface multiplied
    by the number of symmetric copies.


    .. code-block:: python

        #==== Add Wing Geometry ====//
        wing_id = AddGeom( "WING" )

        num_surf = 0

        num_surf = GetTotalNumSurfs( wing_id ) # Wings default with XZ symmetry on -> 2 surfaces

        print( "Total Number of Wing Surfaces: ", False )

        print( num_surf )


    :param [in]: geom_id string Geom ID
    :rtype: int
    :return: int Number of main surfaces
    """
    return _vsp_g.GetTotalNumSurfs(geom_id)

def GetGeomVSPSurfType(geom_id, main_surf_ind=0):
    r"""
    Get the VSP surface type of the specified Geom


    .. code-block:: python

        #==== Add Wing Geometry ====//
        wing_id = AddGeom( "WING" )

        if  GetGeomVSPSurfType( wing_id ) != WING_SURF :
            print( "---> Error: API GetGeomVSPSurfType " )


    See also: VSP_SURF_TYPE
    :param [in]: geom_id string Geom ID
    :param [in]: main_surf_ind int Main surface index
    :rtype: int
    :return: int VSP surface type enum (i.e. DISK_SURF)
    """
    return _vsp_g.GetGeomVSPSurfType(geom_id, main_surf_ind)

def GetGeomVSPSurfCfdType(geom_id, main_surf_ind=0):
    r"""
    Get the VSP surface CFD type of the specified Geom


    .. code-block:: python

        #==== Add Wing Geometry ====//
        wing_id = AddGeom( "WING" )

        if  GetGeomVSPSurfCfdType( wing_id ) != CFD_NORMAL :
            print( "---> Error: API GetGeomVSPSurfCfdType " )


    See also: VSP_SURF_CFD_TYPE
    :param [in]: geom_id string Geom ID
    :param [in]: main_surf_ind int Main surface index
    :rtype: int
    :return: int VSP surface CFD type enum (i.e. CFD_TRANSPARENT)
    """
    return _vsp_g.GetGeomVSPSurfCfdType(geom_id, main_surf_ind)

def GetGeomBBoxMax(geom_id, main_surf_ind=0, ref_frame_is_absolute=True):
    r"""
    Get the the maximum coordinate of the bounding box of a Geom with given main surface index. The Geom bounding
    box may be specified in absolute or body reference frame.


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pid = AddGeom( "POD" )

        SetParmVal( FindParm( pid, "Y_Rotation", "XForm" ), 45 )
        SetParmVal( FindParm( pid, "Z_Rotation", "XForm" ), 25 )

        Update()

        max_pnt = GetGeomBBoxMax( pid, 0, False )


    See also: GetGeomBBoxMin
    :param [in]: geom_id string Geom ID
    :param [in]: main_surf_ind int Main surface index
    :param [in]: ref_frame_is_absolute bool Flag to specify absolute or body reference frame
    :rtype: :py:class:`vec3d`
    :return: vec3d Maximum coordinate of the bounding box
    """
    return _vsp_g.GetGeomBBoxMax(geom_id, main_surf_ind, ref_frame_is_absolute)

def GetGeomBBoxMin(geom_id, main_surf_ind=0, ref_frame_is_absolute=True):
    r"""
    Get the the minimum coordinate of the bounding box of a Geom with given main surface index. The Geom bounding
    box may be specified in absolute or body reference frame.


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pid = AddGeom( "POD" )

        SetParmVal( FindParm( pid, "Y_Rotation", "XForm" ), 45 )
        SetParmVal( FindParm( pid, "Z_Rotation", "XForm" ), 25 )

        Update()

        min_pnt = GetGeomBBoxMin( pid, 0, False )


    See also: GetGeomBBoxMax
    :param [in]: geom_id string Geom ID
    :param [in]: main_surf_ind int Main surface index
    :param [in]: ref_frame_is_absolute bool Flag to specify absolute or body reference frame
    :rtype: :py:class:`vec3d`
    :return: vec3d Minimum coordinate of the bounding box
    """
    return _vsp_g.GetGeomBBoxMin(geom_id, main_surf_ind, ref_frame_is_absolute)

def AddSubSurf(geom_id, type, surfindex=0):
    r"""
    Add a sub-surface to the specified Geom


    .. code-block:: python

        wid = AddGeom( "WING", "" )                             # Add Wing

        # Note: Parm Group for SubSurfaces in the form: "SS_" + type + "_" + count (initialized at 1)
        ss_line_id = AddSubSurf( wid, SS_LINE )                      # Add Sub Surface Line

        SetParmVal( wid, "Const_Line_Value", "SubSurface_1", 0.4 )     # Change Location


    See also: SUBSURF_TYPE
    :param [in]: geom_id string Geom ID
    :param [in]: type int Sub-surface type enum (i.e. SS_RECTANGLE)
    :param [in]: surfindex int Main surface index (default: 0)
    :rtype: string
    :return: string Sub-surface ID
    """
    return _vsp_g.AddSubSurf(geom_id, type, surfindex)

def GetSubSurf(*args):
    r"""
    *Overload 1:*



    Get the ID of the specified sub-surface


    .. code-block:: python

        wid = AddGeom( "WING", "" ) # Add Wing

        ss_rec_1 = AddSubSurf( wid, SS_RECTANGLE ) # Add Sub Surface Rectangle #1

        ss_rec_2 = AddSubSurf( wid, SS_RECTANGLE ) # Add Sub Surface Rectangle #2

        print( ss_rec_2, False )

        print( " = ", False )

        print( GetSubSurf( wid, 1 ) )


    :param [in]: geom_id string Geom ID
    :param [in]: index int Sub-surface index
    :rtype: string
    :return: string Sub-surface ID


    |

    *Overload 2:*



    Get the ID of the specified sub-surface


    .. code-block:: python

        wid = AddGeom( "WING", "" ) # Add Wing

        ss_rec_1 = AddSubSurf( wid, SS_RECTANGLE ) # Add Sub Surface Rectangle #1

        ss_rec_2 = AddSubSurf( wid, SS_RECTANGLE ) # Add Sub Surface Rectangle #2

        print( ss_rec_2, False )

        print( " = ", False )

        print( GetSubSurf( wid, 1 ) )


    :param [in]: geom_id string Geom ID
    :param [in]: name string Sub surface name
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Vector of sub-surface ID
    """
    return _vsp_g.GetSubSurf(*args)

def DeleteSubSurf(*args):
    r"""
    *Overload 1:*



    Delete the specified sub-surface


    .. code-block:: python

        wid = AddGeom( "WING", "" )                             # Add Wing

        ss_line_id = AddSubSurf( wid, SS_LINE )                      # Add Sub Surface Line
        ss_rec_id = AddSubSurf( wid, SS_RECTANGLE )                        # Add Sub Surface Rectangle

        print("Delete SS_Line\n")

        DeleteSubSurf( wid, ss_line_id )

        num_ss = GetNumSubSurf( wid )

        num_str = f"Number of SubSurfaces: {num_ss}\n"

        print( num_str )


    :param [in]: geom_id string Geom ID
    :param [in]: sub_id string Sub-surface ID


    |

    *Overload 2:*



    Delete the specified sub-surface


    .. code-block:: python

        wid = AddGeom( "WING", "" )                             # Add Wing

        ss_line_id = AddSubSurf( wid, SS_LINE )                      # Add Sub Surface Line
        ss_rec_id = AddSubSurf( wid, SS_RECTANGLE )                        # Add Sub Surface Rectangle

        print("Delete SS_Line\n")

        DeleteSubSurf( ss_line_id )

        num_ss = GetNumSubSurf( wid )

        num_str = f"Number of SubSurfaces: {num_ss}\n"

        print( num_str )


    :param [in]: sub_id string Sub-surface ID
    """
    return _vsp_g.DeleteSubSurf(*args)

def SetSubSurfName(*args):
    r"""
    *Overload 1:*



    Set the name of the specified sub-surface


    .. code-block:: python

        wid = AddGeom( "WING", "" )                             # Add Wing

        ss_rec_id = AddSubSurf( wid, SS_RECTANGLE )                        # Add Sub Surface Rectangle

        new_name = "New_SS_Rec_Name"

        SetSubSurfName( wid, ss_rec_id, new_name )


    :param [in]: geom_id string Geom ID
    :param [in]: sub_id string Sub-surface ID
    :param [in]: name string Sub-surface name


    |

    *Overload 2:*



    Set the name of the specified sub-surface


    .. code-block:: python

        wid = AddGeom( "WING", "" )                             # Add Wing

        ss_rec_id = AddSubSurf( wid, SS_RECTANGLE )                        # Add Sub Surface Rectangle

        new_name = "New_SS_Rec_Name"

        SetSubSurfName( ss_rec_id, new_name )


    :param [in]: sub_id string Sub-surface ID
    :param [in]: name string Sub-surface name
    """
    return _vsp_g.SetSubSurfName(*args)

def GetSubSurfName(*args):
    r"""
    *Overload 1:*



    Get the name of the specified sub-surface


    .. code-block:: python

        wid = AddGeom( "WING", "" )                             # Add Wing

        ss_rec_id = AddSubSurf( wid, SS_RECTANGLE )                        # Add Sub Surface Rectangle

        rec_name = GetSubSurfName( wid, ss_rec_id )

        name_str = "Current Name of SS_Rectangle: " + rec_name + "\n"

        print( name_str )


    :param [in]: geom_id string Geom ID
    :param [in]: sub_id string Sub-surface ID
    :rtype: string
    :return: string Sub-surface name


    |

    *Overload 2:*



    Get the name of the specified sub-surface


    .. code-block:: python

        wid = AddGeom( "WING", "" )                             # Add Wing

        ss_rec_id = AddSubSurf( wid, SS_RECTANGLE )                        # Add Sub Surface Rectangle

        rec_name = GetSubSurfName( wid, ss_rec_id )

        name_str = "Current Name of SS_Rectangle: " + rec_name + "\n"

        print( name_str )


    :param [in]: sub_id string Sub-surface ID
    :rtype: string
    :return: string Sub-surface name
    """
    return _vsp_g.GetSubSurfName(*args)

def GetSubSurfIndex(sub_id):
    r"""
    Get the index of the specified sub-surface in its parent Geom's sub-surface vector


    .. code-block:: python

        wid = AddGeom( "WING", "" )                             # Add Wing

        ss_line_id = AddSubSurf( wid, SS_LINE )                      # Add Sub Surface Line
        ss_rec_id = AddSubSurf( wid, SS_RECTANGLE )                        # Add Sub Surface Rectangle

        ind = GetSubSurfIndex( ss_rec_id )

        ind_str = f"Index of SS_Rectangle: {ind}"

        print( ind_str )


    :param [in]: sub_id string Sub-surface ID
    :rtype: int
    :return: int Sub-surface index
    """
    return _vsp_g.GetSubSurfIndex(sub_id)

def GetSubSurfIDVec(geom_id):
    r"""
    Get a vector of all sub-surface IDs for the specified geometry


    .. code-block:: python

        wid = AddGeom( "WING", "" )                             # Add Wing

        ss_line_id = AddSubSurf( wid, SS_LINE )                      # Add Sub Surface Line
        ss_rec_id = AddSubSurf( wid, SS_RECTANGLE )                        # Add Sub Surface Rectangle

        id_vec = GetSubSurfIDVec( wid )

        id_type_str = "SubSurface IDs and Type Indexes -> "

        for i in range(len(id_vec)):

            id_type_str += id_vec[i]

            id_type_str += ": "

            id_type_str += f'{GetSubSurfType(id_vec[i])}'

            id_type_str += "\t"

        id_type_str += "\n"

        print( id_type_str )


    :param [in]: geom_id string Geom ID
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<int> Array of sub-surface IDs
    """
    return _vsp_g.GetSubSurfIDVec(geom_id)

def GetAllSubSurfIDs():
    r"""
    Get a vector of all sub-surface IDs for the entire model
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of sub-surface IDs
    """
    return _vsp_g.GetAllSubSurfIDs()

def GetNumSubSurf(geom_id):
    r"""
    Get the number of sub-surfaces for the specified Geom


    .. code-block:: python

        wid = AddGeom( "WING", "" )                             # Add Wing

        ss_line_id = AddSubSurf( wid, SS_LINE )                      # Add Sub Surface Line
        ss_rec_id = AddSubSurf( wid, SS_RECTANGLE )                        # Add Sub Surface Rectangle

        num_ss = GetNumSubSurf( wid )

        num_str = "Number of SubSurfaces: {num_ss}"

        print( num_str )


    :param [in]: geom_id string Geom ID
    :rtype: int
    :return: int Number of Sub-surfaces
    """
    return _vsp_g.GetNumSubSurf(geom_id)

def GetSubSurfType(sub_id):
    r"""
    Get the type for the specified sub-surface (i.e. SS_RECTANGLE)


    .. code-block:: python

        wid = AddGeom( "WING", "" )                             # Add Wing

        ss_line_id = AddSubSurf( wid, SS_LINE )                      # Add Sub Surface Line
        ss_rec_id = AddSubSurf( wid, SS_RECTANGLE )                        # Add Sub Surface Rectangle

        id_vec = GetSubSurfIDVec( wid )

        id_type_str = "SubSurface IDs and Type Indexes -> "

        for i in range(len(id_vec)):

            id_type_str += id_vec[i]

            id_type_str += ": "

            id_type_str += f'{GetSubSurfType(id_vec[i])}'

            id_type_str += "\t"

        id_type_str += "\n"

        print( id_type_str )


    See also: SUBSURF_TYPE
    :param [in]: sub_id string Sub-surface ID
    :rtype: int
    :return: int Sub-surface type enum (i.e. SS_RECTANGLE)
    """
    return _vsp_g.GetSubSurfType(sub_id)

def GetSubSurfParmIDs(sub_id):
    r"""
    Get the vector of Parm IDs for specified sub-surface


    .. code-block:: python

        wid = AddGeom( "WING", "" )                             # Add Wing

        ss_line_id = AddSubSurf( wid, SS_LINE )                      # Add Sub Surface Line

        # Get and list all Parm info for SS_Line
        parm_id_vec = GetSubSurfParmIDs( ss_line_id )

        for i in range(len(parm_id_vec)):

            id_name_str = "\tName: " + GetParmName(parm_id_vec[i]) + ", Group: " + GetParmDisplayGroupName(parm_id_vec[i]) + ", ID: " + str(parm_id_vec[i]) + "\n"


            print( id_name_str )


    :param [in]: sub_id string Sub-surface ID
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Vector of Parm IDs
    """
    return _vsp_g.GetSubSurfParmIDs(sub_id)

def IntersectSubSurf(sub_id):
    r"""
    Trigger intersection for SS_INTERSECT type subsurfaces


    .. code-block:: python

        pid = AddGeom( "POD", "" )
        p2id = AddGeom( "POD", "" )

        xpod2 = GetParm( p2id, "X_Rel_Location", "XForm" )
        SetParmVal( xpod2, 4.0 )

        zrotpod2 = GetParm( p2id, "Z_Rel_Rotation", "XForm" )
        SetParmVal( zrotpod2, 60.0 )

        sub_id = AddSubSurf( pid, SS_INTERSECT )

        Update()

        SetIntersectSubSurfGeomID( sub_id, p2id )

        IntersectSubSurf( sub_id )

    :param [in]: sub_id string Sub-surface ID
    """
    return _vsp_g.IntersectSubSurf(sub_id)

def SetIntersectSubSurfGeomID(sub_id, geom_id):
    r"""
    Set Geom ID to intersect parent with to create intersection SS_INTERSECT type subsurfaces


    .. code-block:: python

        pid = AddGeom( "POD", "" )
        p2id = AddGeom( "POD", "" )

        xpod2 = GetParm( p2id, "X_Rel_Location", "XForm" )
        SetParmVal( xpod2, 4.0 )

        zrotpod2 = GetParm( p2id, "Z_Rel_Rotation", "XForm" )
        SetParmVal( zrotpod2, 60.0 )

        sub_id = AddSubSurf( pid, SS_INTERSECT )

        Update()

        SetIntersectSubSurfGeomID( sub_id, p2id )

        IntersectSubSurf( sub_id )

    :param [in]: sub_id string Sub-surface ID
    :param [in]: geom_id string Geom ID to intersect with parent to create subsurface
    """
    return _vsp_g.SetIntersectSubSurfGeomID(sub_id, geom_id)

def AddFeaStruct(geom_id, init_skin=True, surfindex=0):
    r"""
    Add an FEA Structure to a specified Geom
    Warning: init_skin should ALWAYS be set to true.


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )


    :param [in]: geom_id string Parent Geom ID
    :param [in]: init_skin bool Flag to initialize the FEA Structure by creating an FEA Skin from the parent Geom's OML at surfindex
    :param [in]: surfindex int Main surface index for the FEA Structure
    :rtype: int
    :return: int FEA Structure index
    """
    return _vsp_g.AddFeaStruct(geom_id, init_skin, surfindex)

def SetFeaMeshStructIndex(struct_index):
    r"""
    Sets FeaMeshMgr m_FeaMeshStructIndex member using passed in index of a FeaStructure


    .. code-block:: python


        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        SetFeaMeshStructIndex( struct_ind )

        if  len(FindGeoms()) != 0 : print( "ERROR: VSPRenew" )


    """
    return _vsp_g.SetFeaMeshStructIndex(struct_index)

def DeleteFeaStruct(geom_id, fea_struct_ind):
    r"""
    Delete an FEA Structure and all FEA Parts and FEA SubSurfaces associated with it


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind_1 = AddFeaStruct( pod_id )

        struct_ind_2 = AddFeaStruct( pod_id )

        DeleteFeaStruct( pod_id, struct_ind_1 )


    :param [in]: geom_id string Parent Geom ID
    :param [in]: fea_struct_ind int FEA Structure index
    """
    return _vsp_g.DeleteFeaStruct(geom_id, fea_struct_ind)

def GetFeaStructID(geom_id, fea_struct_ind):
    r"""
    Get the ID of an FEA Structure


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        struct_id = GetFeaStructID( pod_id, struct_ind )


    :param [in]: geom_id string Parent Geom ID
    :param [in]: fea_struct_ind int FEA Structure index
    :rtype: string
    :return: string FEA Structure ID
    """
    return _vsp_g.GetFeaStructID(geom_id, fea_struct_ind)

def GetFeaStructIndex(struct_id):
    r"""
    Get the index of an FEA Structure in its Parent Geom's vector of Structures


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind_1 = AddFeaStruct( pod_id )

        struct_ind_2 = AddFeaStruct( pod_id )

        struct_id_2 = GetFeaStructID( pod_id, struct_ind_2 )

        DeleteFeaStruct( pod_id, struct_ind_1 )

        struct_ind_2_new = GetFeaStructIndex( struct_id_2 )


    :param [in]: struct_id string FEA Structure ID
    :rtype: int
    :return: int FEA Structure index
    """
    return _vsp_g.GetFeaStructIndex(struct_id)

def GetFeaStructParentGeomID(struct_id):
    r"""
    Get the Parent Geom ID for an FEA Structure


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        struct_id = GetFeaStructID( pod_id, struct_ind )

        #==== Get Parent Geom ID and Index ====//
        parent_id = GetFeaStructParentGeomID( struct_id )


    :param [in]: struct_id string FEA Structure ID
    :rtype: string
    :return: string Parent Geom ID
    """
    return _vsp_g.GetFeaStructParentGeomID(struct_id)

def GetFeaStructName(geom_id, fea_struct_ind):
    r"""
    Get the name of an FEA Structure. The FEA Structure name functions as the the Parm Container name


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        #==== Get Structure Name ====//
        parm_container_name = GetFeaStructName( pod_id, struct_ind )

        display_name = "Current Structure Parm Container Name: " + parm_container_name + "\n"

        print( display_name )


    See also: FindContainer, SetFeaStructName
    :param [in]: geom_id string Parent Geom ID
    :param [in]: fea_struct_ind int FEA Structure index
    :rtype: string
    :return: string Name for the FEA Structure
    """
    return _vsp_g.GetFeaStructName(geom_id, fea_struct_ind)

def SetFeaStructName(geom_id, fea_struct_ind, name):
    r"""
    Set the name of an FEA Structure


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        #==== Change the Structure Name ====//
        SetFeaStructName( pod_id, struct_ind, "Example_Struct" )

        parm_container_id = FindContainer( "Example_Struct", struct_ind )

        display_id = "New Structure Parm Container ID: " + parm_container_id + "\n"

        print( display_id )


    See also: GetFeaStructName
    :param [in]: geom_id string Parent Geom ID
    :param [in]: fea_struct_ind int FEA Structure index
    :param [in]: name string New name for the FEA Structure
    """
    return _vsp_g.SetFeaStructName(geom_id, fea_struct_ind, name)

def GetFeaStructIDVec():
    r"""
    Get the IDs of all FEA Structures in the vehicle


    .. code-block:: python

        #==== Add Geometries ====//
        pod_id = AddGeom( "POD" )
        wing_id = AddGeom( "WING" )

        #==== Add FeaStructures ====//
        pod_struct_ind = AddFeaStruct( pod_id )
        wing_struct_ind = AddFeaStruct( wing_id )

        struct_id_vec = GetFeaStructIDVec()


    See also: NumFeaStructures
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of FEA Structure IDs
    """
    return _vsp_g.GetFeaStructIDVec()

def SetFeaPartName(part_id, name):
    r"""
    Set the name of an FEA Part


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        #==== Add Bulkead ====//
        bulkhead_id = AddFeaPart( pod_id, struct_ind, FEA_SLICE )

        SetFeaPartName( bulkhead_id, "Bulkhead" )


    See also: GetFeaPartName
    :param [in]: part_id string FEA Part ID
    :param [in]: name string New name for the FEA Part
    """
    return _vsp_g.SetFeaPartName(part_id, name)

def AddFeaPart(geom_id, fea_struct_ind, type):
    r"""
    Add an FEA Part to a Structure


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        #==== Add Bulkead ====//
        bulkhead_id = AddFeaPart( pod_id, struct_ind, FEA_SLICE )

        SetParmVal( FindParm( bulkhead_id, "IncludedElements", "FeaPart" ), FEA_SHELL_AND_BEAM )

        SetParmVal( FindParm( bulkhead_id, "RelCenterLocation", "FeaPart" ), 0.15 )


    See also: FEA_PART_TYPE
    :param [in]: geom_id string Parent Geom ID
    :param [in]: fea_struct_ind int FEA Structure index
    :param [in]: type int FEA Part type enum (i.e. FEA_RIB)
    :rtype: string
    :return: string FEA Part ID
    """
    return _vsp_g.AddFeaPart(geom_id, fea_struct_ind, type)

def DeleteFeaPart(geom_id, fea_struct_ind, part_id):
    r"""
    Delete an FEA Part from a Structure


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        #==== Add Bulkead ====//
        bulkhead_id = AddFeaPart( pod_id, struct_ind, FEA_SLICE )

        #==== Add Fixed Point ====//
        fixed_id = AddFeaPart( pod_id, struct_ind, FEA_FIX_POINT )

        #==== Delete Bulkead ====//
        DeleteFeaPart( pod_id, struct_ind, bulkhead_id )


    :param [in]: geom_id string Parent Geom ID
    :param [in]: fea_struct_ind int FEA Structure index
    :param [in]: part_id string FEA Part ID
    """
    return _vsp_g.DeleteFeaPart(geom_id, fea_struct_ind, part_id)

def GetFeaPartID(fea_struct_id, fea_part_index):
    r"""
    Get the Parm ID of an FEA Part, identified from a FEA Structure Parm ID and FEA Part index.


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        struct_id = GetFeaStructID( pod_id, struct_ind )

        #==== Add Bulkead ====//
        bulkhead_id = AddFeaPart( pod_id, struct_ind, FEA_SLICE )

        Update()

        if  bulkhead_id != GetFeaPartID( struct_id, 1 ) : # These should be equivalent (index 0 is skin)

            print( "Error: GetFeaPartID" )


    :param [in]: fea_struct_id string FEA Structure ID
    :param [in]: fea_part_index int FEA Part index
    :rtype: string
    :return: string FEA Part ID
    """
    return _vsp_g.GetFeaPartID(fea_struct_id, fea_part_index)

def GetFeaPartName(part_id):
    r"""
    Get the name of an FEA Part


    .. code-block:: python

        #==== Add Fuselage Geometry ====//
        fuse_id = AddGeom( "FUSELAGE" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( fuse_id )

        #==== Add Bulkead ====//
        bulkhead_id = AddFeaPart( fuse_id, struct_ind, FEA_SLICE )

        name = "example_name"
        SetFeaPartName( bulkhead_id, name )

        if  name != GetFeaPartName( bulkhead_id ) : # These should be equivalent

            print( "Error: GetFeaPartName" )


    See also: SetFeaPartName
    :param [in]: part_id string FEA Part ID
    :rtype: string
    :return: string FEA Part name
    """
    return _vsp_g.GetFeaPartName(part_id)

def GetFeaPartType(part_id):
    r"""
    Get the type of an FEA Part


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        #==== Add Slice ====//
        slice_id = AddFeaPart( pod_id, struct_ind, FEA_SLICE )

        if  FEA_SLICE != GetFeaPartType( slice_id ) : # These should be equivalent

            print( "Error: GetFeaPartType" )


    See also: FEA_PART_TYPE
    :param [in]: part_id string FEA Part ID
    :rtype: int
    :return: int FEA Part type enum
    """
    return _vsp_g.GetFeaPartType(part_id)

def GetFeaPartIDVec(fea_struct_id):
    r"""
    Get the IDs of all FEA Parts in the given FEA Structure


    .. code-block:: python

        #==== Add Geometries ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        struct_id = GetFeaStructID( pod_id, struct_ind )

        #==== Add FEA Parts ====//
        slice_id = AddFeaPart( pod_id, struct_ind, FEA_SLICE )
        dome_id = AddFeaPart( pod_id, struct_ind, FEA_DOME )

        part_id_vec = GetFeaPartIDVec( struct_id ) # Should include slice_id & dome_id


    See also: NumFeaParts
    :param [in]: fea_struct_id string FEA Structure ID
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of FEA Part IDs
    """
    return _vsp_g.GetFeaPartIDVec(fea_struct_id)

def GetFeaSubSurfIDVec(fea_struct_id):
    r"""
    Get the IDs of all FEA SubSurfaces in the given FEA Structure


    .. code-block:: python

        #==== Add Geometries ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        struct_id = GetFeaStructID( pod_id, struct_ind )

        #==== Add SubSurfaces ====//
        line_array_id = AddFeaSubSurf( pod_id, struct_ind, SS_LINE_ARRAY )
        rectangle_id = AddFeaSubSurf( pod_id, struct_ind, SS_RECTANGLE )

        part_id_vec = GetFeaSubSurfIDVec( struct_id ) # Should include line_array_id & rectangle_id


    See also: NumFeaSubSurfs
    :param [in]: fea_struct_id string FEA Structure ID
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of FEA Part IDs
    """
    return _vsp_g.GetFeaSubSurfIDVec(fea_struct_id)

def SetFeaPartPerpendicularSparID(part_id, perpendicular_spar_id):
    r"""
    Set the ID of the perpendicular spar for an FEA Rib or Rib Array. Note, the FEA Rib or Rib Array should have "SPAR_NORMAL"
    set for the "PerpendicularEdgeType" Parm. If it is not, the ID will still be set, but the orientation of the Rib or Rib
    Array will not change.


    .. code-block:: python

        #==== Add Wing Geometry ====//
        wing_id = AddGeom( "WING" )

        #==== Add FeaStructure to Wing ====//
        struct_ind = AddFeaStruct( wing_id )

        #==== Add Rib ====//
        rib_id = AddFeaPart( wing_id, struct_ind, FEA_RIB )

        #==== Add Spars ====//
        spar_id_1 = AddFeaPart( wing_id, struct_ind, FEA_SPAR )
        spar_id_2 = AddFeaPart( wing_id, struct_ind, FEA_SPAR )

        SetParmVal( FindParm( spar_id_1, "RelCenterLocation", "FeaPart" ), 0.25 )
        SetParmVal( FindParm( spar_id_2, "RelCenterLocation", "FeaPart" ), 0.75 )

        #==== Set Perpendicular Edge type to SPAR ====//
        SetParmVal( FindParm( rib_id, "PerpendicularEdgeType", "FeaRib" ), SPAR_NORMAL )

        SetFeaPartPerpendicularSparID( rib_id, spar_id_2 )

        if  spar_id_2 != GetFeaPartPerpendicularSparID( rib_id ) :
            print( "Error: SetFeaPartPerpendicularSparID" )


    See also: FEA_RIB_NORMAL, GetFeaPartPerpendicularSparID
    :param [in]: part_id string FEA Part ID (Rib or Rib Array Type)
    :param [in]: perpendicular_spar_id string FEA Spar ID
    """
    return _vsp_g.SetFeaPartPerpendicularSparID(part_id, perpendicular_spar_id)

def GetFeaPartPerpendicularSparID(part_id):
    r"""
    Get the ID of the perpendicular spar for an FEA Rib or Rib Array. Note, the FEA Rib or Rib Array doesn't have to have "SPAR_NORMAL"
    set for the "PerpendicularEdgeType" Parm for this function to still return a value.


    .. code-block:: python

        #==== Add Wing Geometry ====//
        wing_id = AddGeom( "WING" )

        #==== Add FeaStructure to Wing ====//
        struct_ind = AddFeaStruct( wing_id )

        #==== Add Rib ====//
        rib_id = AddFeaPart( wing_id, struct_ind, FEA_RIB )

        #==== Add Spars ====//
        spar_id_1 = AddFeaPart( wing_id, struct_ind, FEA_SPAR )
        spar_id_2 = AddFeaPart( wing_id, struct_ind, FEA_SPAR )

        SetParmVal( FindParm( spar_id_1, "RelCenterLocation", "FeaPart" ), 0.25 )
        SetParmVal( FindParm( spar_id_2, "RelCenterLocation", "FeaPart" ), 0.75 )

        #==== Set Perpendicular Edge type to SPAR ====//
        SetParmVal( FindParm( rib_id, "PerpendicularEdgeType", "FeaRib" ), SPAR_NORMAL )

        SetFeaPartPerpendicularSparID( rib_id, spar_id_2 )

        if  spar_id_2 != GetFeaPartPerpendicularSparID( rib_id ) :
            print( "Error: GetFeaPartPerpendicularSparID" )


    See also: FEA_RIB_NORMAL, SetFeaPartPerpendicularSparID
    :param [in]: part_id string FEA Part ID (Rib or Rib Array Type)
    :rtype: string
    :return: string Perpendicular FEA Spar ID
    """
    return _vsp_g.GetFeaPartPerpendicularSparID(part_id)

def SetFeaSubSurfName(subsurf_id, name):
    r"""
    Set the name of an FEA SubSurface


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        #==== Add LineArray ====//
        line_array_id = AddFeaSubSurf( pod_id, struct_ind, SS_LINE_ARRAY )

        SetFeaSubSurfName( line_array_id, "Stiffener_array" )


    :param [in]: subsurf_id string FEA SubSurface ID
    :param [in]: name string New name for the FEA SubSurface
    """
    return _vsp_g.SetFeaSubSurfName(subsurf_id, name)

def GetFeaSubSurfName(subsurf_id):
    r"""
    Set the name of an FEA SubSurface


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        #==== Add LineArray ====//
        line_array_id = AddFeaSubSurf( pod_id, struct_ind, SS_LINE_ARRAY )

        name = "example_name"
        SetFeaSubSurfName( line_array_id, name )

        if  name != GetFeaSubSurfName( line_array_id ) : # These should be equivalent
            print( "Error: GetFeaSubSurfName" )


    :param [in]: subsurf_id string FEA SubSurface ID
    :rtype: string
    :return: string FEA SubSurf name
    """
    return _vsp_g.GetFeaSubSurfName(subsurf_id)

def AddFeaSubSurf(geom_id, fea_struct_ind, type):
    r"""
    Add an FEA SubSurface to a Structure


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        #==== Add LineArray ====//
        line_array_id = AddFeaSubSurf( pod_id, struct_ind, SS_LINE_ARRAY )

        SetParmVal( FindParm( line_array_id, "ConstLineType", "SS_LineArray" ), 1 ) # Constant W

        SetParmVal( FindParm( line_array_id, "Spacing", "SS_LineArray" ), 0.25 )


    See also: SUBSURF_TYPE
    :param [in]: geom_id string Parent Geom ID
    :param [in]: fea_struct_ind int FEA Structure index
    :param [in]: type int FEA SubSurface type enum (i.e. SS_ELLIPSE)
    :rtype: string
    :return: string FEA SubSurface ID
    """
    return _vsp_g.AddFeaSubSurf(geom_id, fea_struct_ind, type)

def DeleteFeaSubSurf(geom_id, fea_struct_ind, ss_id):
    r"""
    Delete an FEA SubSurface from a Structure


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        #==== Add LineArray ====//
        line_array_id = AddFeaSubSurf( pod_id, struct_ind, SS_LINE_ARRAY )

        #==== Add Rectangle ====//
        rect_id = AddFeaSubSurf( pod_id, struct_ind, SS_RECTANGLE )

        #==== Delete LineArray ====//
        DeleteFeaSubSurf( pod_id, struct_ind, line_array_id )


    :param [in]: geom_id string Parent Geom ID
    :param [in]: fea_struct_ind int FEA Structure index
    :param [in]: ss_id string FEA SubSurface ID
    """
    return _vsp_g.DeleteFeaSubSurf(geom_id, fea_struct_ind, ss_id)

def GetFeaSubSurfIndex(ss_id):
    r"""
    Get the index of an FEA SubSurface give the SubSurface ID


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        #==== Add Slice ====//
        slice_id = AddFeaPart( pod_id, struct_ind, FEA_SLICE )

        #==== Add LineArray ====//
        line_array_id = AddFeaSubSurf( pod_id, struct_ind, SS_LINE_ARRAY )

        #==== Add Rectangle ====//
        rect_id = AddFeaSubSurf( pod_id, struct_ind, SS_RECTANGLE )

        if  1 != GetFeaSubSurfIndex( rect_id ) : # These should be equivalent

            print( "Error: GetFeaSubSurfIndex" )


    :param [in]: ss_id string FEA SubSurface ID
    :rtype: int
    :return: int FEA SubSurface Index
    """
    return _vsp_g.GetFeaSubSurfIndex(ss_id)

def GetFeaPolySparNumPt(pspar_id):
    r"""
    Get the number of points in an FEA Poly Spar. A newly created Poly Spar contains two points
    (the inboard and outboard endpoints).


    .. code-block:: python

        wing_id = AddGeom( "WING" )

        struct_ind = AddFeaStruct( wing_id )

        pspar_id = AddFeaPart( wing_id, struct_ind, FEA_POLY_SPAR )

        # A new Poly Spar starts with 2 points
        if GetFeaPolySparNumPt( pspar_id ) != 2:
            print( "Error: GetFeaPolySparNumPt" )


    See also: AddFeaPolySparPt, InsertFeaPolySparPt, DelFeaPolySparPt, DelAllFeaPolySparPt
    :param [in]: pspar_id string FEA Poly Spar part ID
    :rtype: int
    :return: int Number of points in the Poly Spar
    """
    return _vsp_g.GetFeaPolySparNumPt(pspar_id)

def AddFeaPolySparPt(pspar_id):
    r"""
    Add a point to the end of an FEA Poly Spar and return its ID. The new point is appended
    after all existing points.


    .. code-block:: python

        wing_id = AddGeom( "WING" )

        struct_ind = AddFeaStruct( wing_id )

        pspar_id = AddFeaPart( wing_id, struct_ind, FEA_POLY_SPAR )

        pt_id = AddFeaPolySparPt( pspar_id )

        if GetFeaPolySparNumPt( pspar_id ) != 3:
            print( "Error: AddFeaPolySparPt" )


    See also: InsertFeaPolySparPt, DelFeaPolySparPt, GetFeaPolySparNumPt
    :param [in]: pspar_id string FEA Poly Spar part ID
    :rtype: string
    :return: string ID of the newly added Poly Spar point
    """
    return _vsp_g.AddFeaPolySparPt(pspar_id)

def InsertFeaPolySparPt(pspar_id, index):
    r"""
    Insert a point into an FEA Poly Spar before the given index and return its ID.


    .. code-block:: python

        wing_id = AddGeom( "WING" )

        struct_ind = AddFeaStruct( wing_id )

        pspar_id = AddFeaPart( wing_id, struct_ind, FEA_POLY_SPAR )

        # Insert a new intermediate point between the two default endpoints
        pt_id = InsertFeaPolySparPt( pspar_id, 1 )

        if GetFeaPolySparNumPt( pspar_id ) != 3:
            print( "Error: InsertFeaPolySparPt" )


    See also: AddFeaPolySparPt, DelFeaPolySparPt, GetFeaPolySparNumPt
    :param [in]: pspar_id string FEA Poly Spar part ID
    :param [in]: index int Index before which the new point is inserted
    :rtype: string
    :return: string ID of the newly inserted Poly Spar point
    """
    return _vsp_g.InsertFeaPolySparPt(pspar_id, index)

def DelFeaPolySparPt(pspar_id, index):
    r"""
    Delete the point at the given index from an FEA Poly Spar.


    .. code-block:: python

        wing_id = AddGeom( "WING" )

        struct_ind = AddFeaStruct( wing_id )

        pspar_id = AddFeaPart( wing_id, struct_ind, FEA_POLY_SPAR )

        AddFeaPolySparPt( pspar_id )
        AddFeaPolySparPt( pspar_id )

        # Delete the point at index 2 (leaving 3 points)
        DelFeaPolySparPt( pspar_id, 2 )

        if GetFeaPolySparNumPt( pspar_id ) != 3:
            print( "Error: DelFeaPolySparPt" )


    See also: DelAllFeaPolySparPt, AddFeaPolySparPt, GetFeaPolySparNumPt
    :param [in]: pspar_id string FEA Poly Spar part ID
    :param [in]: index int Index of the point to delete
    """
    return _vsp_g.DelFeaPolySparPt(pspar_id, index)

def DelAllFeaPolySparPt(pspar_id):
    r"""
    Delete all points from an FEA Poly Spar.


    .. code-block:: python

        wing_id = AddGeom( "WING" )

        struct_ind = AddFeaStruct( wing_id )

        pspar_id = AddFeaPart( wing_id, struct_ind, FEA_POLY_SPAR )

        AddFeaPolySparPt( pspar_id )
        AddFeaPolySparPt( pspar_id )

        DelAllFeaPolySparPt( pspar_id )

        if GetFeaPolySparNumPt( pspar_id ) != 0:
            print( "Error: DelAllFeaPolySparPt" )


    See also: DelFeaPolySparPt, AddFeaPolySparPt, GetFeaPolySparNumPt
    :param [in]: pspar_id string FEA Poly Spar part ID
    """
    return _vsp_g.DelAllFeaPolySparPt(pspar_id)

def MoveFeaPolySparPt(pspar_id, index, reorder_type):
    r"""
    Move a point within an FEA Poly Spar using a reorder type and return the new index of the moved point.


    .. code-block:: python

        wing_id = AddGeom( "WING" )

        struct_ind = AddFeaStruct( wing_id )

        pspar_id = AddFeaPart( wing_id, struct_ind, FEA_POLY_SPAR )

        AddFeaPolySparPt( pspar_id )

        # Move point at index 2 up one position
        new_index = MoveFeaPolySparPt( pspar_id, 2, REORDER_MOVE_UP )

        if new_index != 1:
            print( "Error: MoveFeaPolySparPt" )


    See also: REORDER_TYPE, AddFeaPolySparPt, GetFeaPolySparNumPt
    :param [in]: pspar_id string FEA Poly Spar part ID
    :param [in]: index int Index of the point to move
    :param [in]: reorder_type int Reorder type enum (i.e. REORDER_MOVE_UP, REORDER_MOVE_DOWN, REORDER_MOVE_TOP, REORDER_MOVE_BOTTOM)
    :rtype: int
    :return: int New index of the moved point
    """
    return _vsp_g.MoveFeaPolySparPt(pspar_id, index, reorder_type)

def SetFeaPolySparPtName(pspar_id, index, name):
    r"""
    Set the name of a point in an FEA Poly Spar.


    .. code-block:: python

        wing_id = AddGeom( "WING" )

        struct_ind = AddFeaStruct( wing_id )

        pspar_id = AddFeaPart( wing_id, struct_ind, FEA_POLY_SPAR )

        SetFeaPolySparPtName( pspar_id, 0, "InboardPt" )
        SetFeaPolySparPtName( pspar_id, 1, "OutboardPt" )

        if GetFeaPolySparPtName( pspar_id, 0 ) != "InboardPt":
            print( "Error: SetFeaPolySparPtName" )


    See also: GetFeaPolySparPtName
    :param [in]: pspar_id string FEA Poly Spar part ID
    :param [in]: index int Index of the point
    :param [in]: name string New name for the point
    """
    return _vsp_g.SetFeaPolySparPtName(pspar_id, index, name)

def GetFeaPolySparPtName(pspar_id, index):
    r"""
    Get the name of a point in an FEA Poly Spar.


    .. code-block:: python

        wing_id = AddGeom( "WING" )

        struct_ind = AddFeaStruct( wing_id )

        pspar_id = AddFeaPart( wing_id, struct_ind, FEA_POLY_SPAR )

        SetFeaPolySparPtName( pspar_id, 0, "InboardPt" )

        name = GetFeaPolySparPtName( pspar_id, 0 )

        print( "Point 0 name: " + name )


    See also: SetFeaPolySparPtName
    :param [in]: pspar_id string FEA Poly Spar part ID
    :param [in]: index int Index of the point
    :rtype: string
    :return: string Name of the point
    """
    return _vsp_g.GetFeaPolySparPtName(pspar_id, index)

def GetFeaPolySparPtID(pspar_id, index):
    r"""
    Get the ID of a point in an FEA Poly Spar. The returned ID is a ParmContainer ID that can
    be used with FindParm to access the point's parameters such as Eta, U01, U0N, and XoC.


    .. code-block:: python

        wing_id = AddGeom( "WING" )

        struct_ind = AddFeaStruct( wing_id )

        pspar_id = AddFeaPart( wing_id, struct_ind, FEA_POLY_SPAR )

        pt_id = GetFeaPolySparPtID( pspar_id, 0 )

        # Set the spanwise location of the inboard point to eta = 0.1
        SetParmVal( FindParm( pt_id, "Eta", "FeaPolySparPoint" ), 0.1 )

        pt_id_1 = GetFeaPolySparPtID( pspar_id, 1 )

        # Set the spanwise location of the outboard point to eta = 0.9
        SetParmVal( FindParm( pt_id_1, "Eta", "FeaPolySparPoint" ), 0.9 )


    See also: GetAllFeaPolySparPtIDVec, FindParm, SetParmVal
    :param [in]: pspar_id string FEA Poly Spar part ID
    :param [in]: index int Index of the point
    :rtype: string
    :return: string ID of the Poly Spar point ParmContainer
    """
    return _vsp_g.GetFeaPolySparPtID(pspar_id, index)

def GetAllFeaPolySparPtIDVec(pspar_id):
    r"""
    Get a vector of IDs for all points in an FEA Poly Spar. Each ID is a ParmContainer ID that
    can be used with FindParm to access the point's parameters such as Eta, U01, U0N, and XoC.


    .. code-block:: python

        wing_id = AddGeom( "WING" )

        struct_ind = AddFeaStruct( wing_id )

        pspar_id = AddFeaPart( wing_id, struct_ind, FEA_POLY_SPAR )

        AddFeaPolySparPt( pspar_id )

        pt_ids = GetAllFeaPolySparPtIDVec( pspar_id )

        if len( pt_ids ) != 3:
            print( "Error: GetAllFeaPolySparPtIDVec" )

        # Set each point's spanwise eta location
        SetParmVal( FindParm( pt_ids[0], "Eta", "FeaPolySparPoint" ), 0.1 )
        SetParmVal( FindParm( pt_ids[1], "Eta", "FeaPolySparPoint" ), 0.5 )
        SetParmVal( FindParm( pt_ids[2], "Eta", "FeaPolySparPoint" ), 0.9 )


    See also: GetFeaPolySparPtID, FindParm, SetParmVal
    :param [in]: pspar_id string FEA Poly Spar part ID
    :rtype: vector< string >
    :return: vector <string> Vector of Poly Spar point ParmContainer IDs
    """
    return _vsp_g.GetAllFeaPolySparPtIDVec(pspar_id)

def NumFeaStructures():
    r"""
    Get the total number of FEA Structures in the vehicle


    .. code-block:: python

        #==== Add Pod Geometry ====//
        wing_id = AddGeom( "WING" )

        #==== Add FeaStructure to Pod ====//
        struct_1 = AddFeaStruct( wing_id )
        struct_2 = AddFeaStruct( wing_id )

        if  NumFeaStructures() != 2 :
            print( "Error: NumFeaStructures" )


    See also: GetFeaStructIDVec
    :rtype: int
    :return: int Total Number of FEA Structures
    """
    return _vsp_g.NumFeaStructures()

def NumFeaParts(fea_struct_id):
    r"""
    Get the number of FEA Parts for a particular FEA Structure


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        struct_id = GetFeaStructID( pod_id, struct_ind )

        #==== Add FEA Parts ====//
        slice_id = AddFeaPart( pod_id, struct_ind, FEA_SLICE )
        dome_id = AddFeaPart( pod_id, struct_ind, FEA_DOME )

        if  NumFeaParts( struct_id ) != 3 : # Includes FeaSkin

            print( "Error: NumFeaParts" )


    See also: GetFeaPartIDVec
    :param [in]: fea_struct_id string FEA Structure ID
    :rtype: int
    :return: int Number of FEA Parts
    """
    return _vsp_g.NumFeaParts(fea_struct_id)

def NumFeaSubSurfs(fea_struct_id):
    r"""
    Get the number of FEA Subsurfaces for a particular FEA Structure


    .. code-block:: python

        #==== Add Pod Geometry ====//
        wing_id = AddGeom( "WING" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( wing_id )

        struct_id = GetFeaStructID( wing_id, struct_ind )

        #==== Add SubSurfaces ====//
        line_array_id = AddFeaSubSurf( wing_id, struct_ind, SS_LINE_ARRAY )
        rectangle_id = AddFeaSubSurf( wing_id, struct_ind, SS_RECTANGLE )

        if  NumFeaSubSurfs( struct_id ) != 2 :
            print( "Error: NumFeaSubSurfs" )


    See also: GetFeaSubSurfIDVec
    :param [in]: fea_struct_id string FEA Structure ID
    :rtype: int
    :return: int Number of FEA SubSurfaces
    """
    return _vsp_g.NumFeaSubSurfs(fea_struct_id)

def AddFeaBC(fea_struct_id, type=-1):
    r"""
    Add an FEA BC to a Structure


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        struct_id = GetFeaStructID( pod_id, struct_ind );

        #==== Add BC ====//
        bc_id = AddFeaBC( struct_id, FEA_BC_STRUCTURE )


    See also: FEA_BC_TYPE
    :param [in]: fea_struct_id string FEA Structure ID
    :param [in]: type int FEA BC type enum ( i.e. FEA_BC_STRUCTURE )
    :rtype: string
    :return: string FEA BC ID
    """
    return _vsp_g.AddFeaBC(fea_struct_id, type)

def DelFeaBC(fea_struct_id, bc_id):
    r"""
    Delete an FEA BC from a Structure


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        struct_id = GetFeaStructID( pod_id, struct_ind );

        #==== Add BC ====//
        bc_id = AddFeaBC( struct_id, FEA_BC_STRUCTURE )

        DelFeaBC( struct_id, bc_id )


    See also: FEA_BC_TYPE
    :param [in]: fea_struct_id string FEA Structure ID
    :param [in]: bc_id int FEA BC ID
    """
    return _vsp_g.DelFeaBC(fea_struct_id, bc_id)

def GetFeaBCIDVec(fea_struct_id):
    r"""
    Return a vector of FEA BC ID's for a structure


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        struct_id = GetFeaStructID( pod_id, struct_ind );

        #==== Add BC ====//
        bc_id = AddFeaBC( struct_id, FEA_BC_STRUCTURE )

        bc_id_vec = GetFeaBCIDVec( struct_id )


    :param [in]: fea_struct_id string FEA Structure ID
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of FEA BC IDs
    """
    return _vsp_g.GetFeaBCIDVec(fea_struct_id)

def NumFeaBCs(fea_struct_id):
    r"""
    Return number of FEA BC's in a structure


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        struct_id = GetFeaStructID( pod_id, struct_ind );

        #==== Add BC ====//
        bc_id = AddFeaBC( struct_id, FEA_BC_STRUCTURE )

        nbc = NumFeaBCs( struct_id )


    :param [in]: fea_struct_id string FEA Structure ID
    :rtype: int
    :return: int Number of FEA BCs
    """
    return _vsp_g.NumFeaBCs(fea_struct_id)

def AddFeaMaterial():
    r"""
    Add an FEA Material the FEA Mesh material library. Materials are available across all Geoms and Structures.


    .. code-block:: python

        #==== Create FeaMaterial ====//
        mat_id = AddFeaMaterial()

        SetParmVal( FindParm( mat_id, "MassDensity", "FeaMaterial" ), 0.016 )


    :rtype: string
    :return: string FEA Material ID
    """
    return _vsp_g.AddFeaMaterial()

def AddFeaProperty(property_type=0):
    r"""
    Add aa FEA Property the FEA Mesh property library. Properties are available across all Geoms and Structures. Currently only beam and
    shell properties are available. Note FEA_SHELL_AND_BEAM is not a valid property type.


    .. code-block:: python

        #==== Create FeaProperty ====//
        prop_id = AddFeaProperty()

        SetParmVal( FindParm( prop_id, "Thickness", "FeaProperty" ), 0.01 )


    See also: FEA_PART_ELEMENT_TYPE
    :param [in]: property_type int FEA Property type enum (i.e. FEA_SHELL).
    :rtype: string
    :return: string FEA Property ID
    """
    return _vsp_g.AddFeaProperty(property_type)

def SetFeaMeshVal(geom_id, fea_struct_ind, type, val):
    r"""
    Set the value of a particular FEA Mesh option for the specified Structure. Note, FEA Mesh makes use of enums initially created for CFD Mesh
    but not all CFD Mesh options are available for FEA Mesh.


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        #==== Adjust FeaMeshSettings ====//
        SetFeaMeshVal( pod_id, struct_ind, CFD_MAX_EDGE_LEN, 0.75 )

        SetFeaMeshVal( pod_id, struct_ind, CFD_MIN_EDGE_LEN, 0.2 )


    See also: CFD_CONTROL_TYPE
    :param [in]: geom_id string Parent Geom ID
    :param [in]: fea_struct_ind int FEA Structure index
    :param [in]: type int FEA Mesh option type enum (i.e. CFD_MAX_EDGE_LEN)
    :param [in]: val double Value the option is set to
    """
    return _vsp_g.SetFeaMeshVal(geom_id, fea_struct_ind, type, val)

def SetFeaMeshFileName(geom_id, fea_struct_ind, file_type, file_name):
    r"""
    Set the name of a particular FEA Mesh output file for a specified Structure


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        struct_id = GetFeaStructID( pod_id, struct_ind )

        #=== Set Export File Name ===//
        export_name = "FEAMeshTest_calculix.dat"

        #==== Get Parent Geom ID and Index ====//
        parent_id = GetFeaStructParentGeomID( struct_id ) # same as pod_id

        SetFeaMeshFileName( parent_id, struct_ind, FEA_CALCULIX_FILE_NAME, export_name )


    :param [in]: geom_id string Parent Geom ID
    :param [in]: fea_struct_ind int FEA Structure index
    :param [in]: file_type int FEA output file type enum (i.e. FEA_EXPORT_TYPE)
    :param [in]: file_name string Name for the output file
    """
    return _vsp_g.SetFeaMeshFileName(geom_id, fea_struct_ind, file_type, file_name)

def ComputeFeaMesh(*args):
    r"""
    *Overload 1:*



    Compute an FEA Mesh for a Structure. Only a single output file can be generated with this function.


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        struct_id = GetFeaStructID( pod_id, struct_ind )

        #==== Generate FEA Mesh and Export ====//
        print( "--> Generating FeaMesh " )

        #==== Get Parent Geom ID and Index ====//
        parent_id = GetFeaStructParentGeomID( struct_id ) # same as pod_id

        ComputeFeaMesh( parent_id, struct_ind, FEA_CALCULIX_FILE_NAME )


    See also: SetFeaMeshFileName, FEA_EXPORT_TYPE
    :param [in]: geom_id string Parent Geom ID
    :param [in]: fea_struct_ind int FEA Structure index
    :param [in]: file_type int FEA output file type enum (i.e. FEA_EXPORT_TYPE)


    |

    *Overload 2:*



    Compute an FEA Mesh for a Structure. Only a single output file can be generated with this function.


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        struct_id = GetFeaStructID( pod_id, struct_ind )

        #==== Generate FEA Mesh and Export ====//
        print( string( "--> Generating FeaMesh " ) )

        #==== Get Parent Geom ID and Index ====//
        parent_id = GetFeaStructParentGeomID( struct_id ) # same as pod_id

        Could also call ComputeFeaMesh ( struct_id, FEA_CALCULIX_FILE_NAME )


    See also: SetFeaMeshFileName, FEA_EXPORT_TYPE
    :param [in]: struct_id string FEA Structure index
    :param [in]: file_type int FEA output file type enum (i.e. FEA_EXPORT_TYPE)
    """
    return _vsp_g.ComputeFeaMesh(*args)

def SetXSecAlias(id, alias):
    r"""
    Set XSec Alias by ID


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        # Identify XSec 1
        xsec_1 = GetXSec( xsec_surf, 1 )

        # Set Alias and verify alias match
        alias = "XSec_One_Alias"

        SetXSecAlias( xsec_1, alias )

        get_alias = GetXSecAlias( xsec_1 )

        if alias != get_alias:
            print("SetXSecAlias/GetXSecAlias error!")


    :param [in]: id string XSec ID
    :param [in]: alias string Xsec alias
    """
    return _vsp_g.SetXSecAlias(id, alias)

def GetXSecAlias(id):
    r"""
    Get XSec Alias by ID


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        # Identify XSec 1
        xsec_1 = GetXSec( xsec_surf, 1 )

        # Set Alias and verify alias match
        alias = "XSec_One_Alias"

        SetXSecAlias( xsec_1, alias )

        get_alias = GetXSecAlias( xsec_1 )

        if alias != get_alias:
            print("SetXSecAlias/GetXSecAlias error!")


    :param [in]: id string XSec ID
    :rtype: string
    :return: string Xsec alias
    """
    return _vsp_g.GetXSecAlias(id)

def SetXSecCurveAlias(id, alias):
    r"""
    Set XSecCurve Alias by XSec ID


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        # Identify XSec 1
        xsec_1 = GetXSec( xsec_surf, 1 )

        # Set Alias and verify alias match
        alias = "XSecCurve_One_Alias"

        SetXSecCurveAlias( xsec_1, alias )

        get_alias = GetXSecCurveAlias( xsec_1 )

        if alias != get_alias:
            print("SetXSecCurveAlias/GetXSecCurveAlias error!")


    :param [in]: id string XSec ID
    :param [in]: alias string XsecCurve alias
    """
    return _vsp_g.SetXSecCurveAlias(id, alias)

def GetXSecCurveAlias(id):
    r"""
    Get XSecCurve Alias by XSec ID


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        # Identify XSec 1
        xsec_1 = GetXSec( xsec_surf, 1 )

        # Set Alias and verify alias match
        alias = "XSecCurve_One_Alias"

        SetXSecCurveAlias( xsec_1, alias )

        get_alias = GetXSecCurveAlias( xsec_1 )

        if alias != get_alias:
            print("SetXSecCurveAlias/GetXSecCurveAlias error!")


    :param [in]: id string XSec ID
    """
    return _vsp_g.GetXSecCurveAlias(id)

def CutXSec(geom_id, index):
    r"""
    Cut a cross-section from the specified geometry and maintain it in memory


    .. code-block:: python

        fid = AddGeom( "FUSELAGE", "" )             # Add Fuselage

        #==== Insert, Cut, Paste Example ====//
        InsertXSec( fid, 1, XS_ROUNDED_RECTANGLE )         # Insert A Cross-Section

        CopyXSec( fid, 2 )                                 # Copy Just Created XSec To Clipboard

        PasteXSec( fid, 1 )                                # Paste Clipboard

        CutXSec( fid, 2 )                                  # Cut Created XSec


    See also: PasteXSec
    :param [in]: geom_id string Geom ID
    :param [in]: index int XSec index
    """
    return _vsp_g.CutXSec(geom_id, index)

def CopyXSec(geom_id, index):
    r"""
    Copy a cross-section from the specified geometry and maintain it in memory


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Copy XSec To Clipboard
        CopyXSec( sid, 1 )

        # Paste To XSec 3
        PasteXSec( sid, 3 )


    See also: PasteXSec
    :param [in]: geom_id string Geom ID
    :param [in]: index int XSec index
    """
    return _vsp_g.CopyXSec(geom_id, index)

def PasteXSec(geom_id, index):
    r"""
    Paste the cross-section currently held in memory to the specified geometry


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Copy XSec To Clipboard
        CopyXSec( sid, 1 )

        # Paste To XSec 3
        PasteXSec( sid, 3 )


    See also: CutXSec, CopyXSec
    :param [in]: geom_id string Geom ID
    :param [in]: index int XSec index
    """
    return _vsp_g.PasteXSec(geom_id, index)

def InsertXSec(geom_id, index, type):
    r"""
    Insert a cross-section of particular type to the specified geometry after the given index


    .. code-block:: python

        wing_id = AddGeom( "WING" )

        #===== Add XSec ====//
        InsertXSec( wing_id, 1, XS_SIX_SERIES )


    See also: XSEC_CRV_TYPE
    :param [in]: geom_id string Geom ID
    :param [in]: index int XSec index
    :param [in]: type int XSec type enum (i.e. XS_GENERAL_FUSE)
    """
    return _vsp_g.InsertXSec(geom_id, index, type)

def SplitWingXSec(wing_id, section_index):
    r"""
    Split a given wing section.


    .. code-block:: python

        wing_id = AddGeom( "WING", "" )

        #==== Set Wing Section Controls ====//
        SplitWingXSec( wing_id, 1 )

        Update()

    See also: WING_DRIVERS, XSEC_DRIVERS
    :param [in]: wing_id string Geom ID
    :param [in]: section_index int Wing section index
    """
    return _vsp_g.SplitWingXSec(wing_id, section_index)

def SetDriverGroup(geom_id, section_index, driver_0, driver_1=-1, driver_2=-1):
    r"""
    Set the driver group for a wing section or a XSecCurve. Care has to be taken when setting these driver groups to ensure a valid combination.


    .. code-block:: python

        #==== Add Wing Geometry and Set Parms ====//
        wing_id = AddGeom( "WING", "" )

        #==== Set Wing Section Controls ====//
        SetDriverGroup( wing_id, 1, AR_WSECT_DRIVER, ROOTC_WSECT_DRIVER, TIPC_WSECT_DRIVER )

        Update()

        #==== Set Parms ====//
        SetParmVal( wing_id, "Root_Chord", "XSec_1", 2 )
        SetParmVal( wing_id, "Tip_Chord", "XSec_1", 1 )

        Update()


    See also: WING_DRIVERS, XSEC_DRIVERS
    :param [in]: geom_id string Geom ID
    :param [in]: section_index int Wing section index
    :param [in]: driver_0 int First driver enum (i.e. SPAN_WSECT_DRIVER)
    :param [in]: driver_1 int Second driver enum (i.e. ROOTC_WSECT_DRIVER)
    :param [in]: driver_2 int Third driver enum (i.e. TIPC_WSECT_DRIVER)
    """
    return _vsp_g.SetDriverGroup(geom_id, section_index, driver_0, driver_1, driver_2)

def GetXSecSurf(geom_id, index):
    r"""
    Get the XSecSurf ID for a particular Geom and XSecSurf index


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )


    :param [in]: geom_id string Geom ID
    :param [in]: index int XSecSurf index
    :rtype: string
    :return: string XSecSurf ID
    """
    return _vsp_g.GetXSecSurf(geom_id, index)

def GetNumXSec(xsec_surf_id):
    r"""
    Get number of XSecs in an XSecSurf


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        # Flatten ends
        num_xsecs = GetNumXSec( xsec_surf )

        for i in range(num_xsecs):

            xsec = GetXSec( xsec_surf, i )

            SetXSecTanAngles( xsec, XSEC_BOTH_SIDES, 0, -1.0e12, -1.0e12, -1.0e12 )       # Set Tangent Angles At Cross Section

            SetXSecTanStrengths( xsec, XSEC_BOTH_SIDES, 0.0, -1.0e12, -1.0e12, -1.0e12 )  # Set Tangent Strengths At Cross Section


    :param [in]: xsec_surf_id string XSecSurf ID
    :rtype: int
    :return: int Number of XSecs
    """
    return _vsp_g.GetNumXSec(xsec_surf_id)

def GetXSec(xsec_surf_id, xsec_index):
    r"""
    Get Xsec ID for a particular XSecSurf at given index


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        # Identify XSec 1
        xsec_1 = GetXSec( xsec_surf, 1 )


    :param [in]: xsec_surf_id string XSecSurf ID
    :param [in]: xsec_index int Xsec index
    :rtype: string
    :return: string Xsec ID
    """
    return _vsp_g.GetXSec(xsec_surf_id, xsec_index)

def ChangeXSecShape(xsec_surf_id, xsec_index, type):
    r"""
    Change the shape of a particular XSec, identified by an XSecSurf ID and XSec index


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        # Set XSec 1 & 2 to Edit Curve type
        ChangeXSecShape( xsec_surf, 1, XS_EDIT_CURVE )
        ChangeXSecShape( xsec_surf, 2, XS_EDIT_CURVE )

        xsec_2 = GetXSec( xsec_surf, 2 )

        if  GetXSecShape( xsec_2 ) != XS_EDIT_CURVE :
            print( "Error: ChangeXSecShape" )


    See also: XSEC_CRV_TYPE
    :param [in]: xsec_surf_id string XSecSurf ID
    :param [in]: xsec_index int Xsec index
    :param [in]: type int Xsec type enum (i.e. XS_ELLIPSE)
    """
    return _vsp_g.ChangeXSecShape(xsec_surf_id, xsec_index, type)

def SetXSecSurfGlobalXForm(xsec_surf_id, mat):
    r"""
    Set the global surface transform matrix for given XSecSurf
    :param [in]: xsec_surf_id string XSecSurf ID
    :param [in]: mat Matrix4d Transformation matrix
    """
    return _vsp_g.SetXSecSurfGlobalXForm(xsec_surf_id, mat)

def GetXSecSurfGlobalXForm(xsec_surf_id):
    r"""
    Get the global surface transform matrix for given XSecSurf
    :param [in]: xsec_surf_id string XSecSurf ID
    :rtype: :py:class:`Matrix4d`
    :return: Matrix4d Transformation matrix
    """
    return _vsp_g.GetXSecSurfGlobalXForm(xsec_surf_id)

def GetXSecShape(xsec_id):
    r"""
    Get the shape of an XSec


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        ChangeXSecShape( xsec_surf, 1, XS_EDIT_CURVE )

        xsec = GetXSec( xsec_surf, 1 )

        if  GetXSecShape( xsec ) != XS_EDIT_CURVE : print( "ERROR: GetXSecShape" )


    See also: XSEC_CRV_TYPE
    :param [in]: xsec_id string XSec ID
    :rtype: int
    :return: int XSec type enum (i.e. XS_ELLIPSE)
    """
    return _vsp_g.GetXSecShape(xsec_id)

def GetXSecWidth(xsec_id):
    r"""
    Get the width of an XSec. Note that POINT type XSecs have a width and height of 0, regardless of what width and height it is set to.


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        xsec_surf = GetXSecSurf( fuseid, 0 )

        xsec = GetXSec( xsec_surf, GetNumXSec( xsec_surf ) - 2 ) # Get 2nd to last XSec

        SetXSecWidthHeight( xsec, 3.0, 6.0 )

        if  abs( GetXSecWidth( xsec ) - 3.0 ) > 1e-6 : print( "---> Error: API Get/Set Width " )


    See also: SetXSecWidth
    :param [in]: xsec_id string XSec ID
    :rtype: float
    :return: double Xsec width
    """
    return _vsp_g.GetXSecWidth(xsec_id)

def GetXSecHeight(xsec_id):
    r"""
    Get the height of an XSec. Note that POINT type XSecs have a width and height of 0, regardless of what width and height it is set to.


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        xsec_surf = GetXSecSurf( fuseid, 0 )

        xsec = GetXSec( xsec_surf, GetNumXSec( xsec_surf ) - 2 ) # Get 2nd to last XSec

        SetXSecWidthHeight( xsec, 3.0, 6.0 )

        if  abs( GetXSecHeight( xsec ) - 6.0 ) > 1e-6 : print( "---> Error: API Get/Set Width " )


    See also: SetXSecHeight
    :param [in]: xsec_id string XSec ID
    :rtype: float
    :return: double Xsec height
    """
    return _vsp_g.GetXSecHeight(xsec_id)

def SetXSecWidthHeight(xsec_id, w, h):
    r"""
    Set the width and height of an XSec. Note, if the XSec is an EDIT_CURVE type and PreserveARFlag is true, the input width value will be
    ignored and instead set from on the input height and aspect ratio. Use SetXSecWidth and SetXSecHeight directly to avoid this.


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        # Identify XSec 2
        xsec_2 = GetXSec( xsec_surf, 2 )

        SetXSecWidthHeight( xsec_2, 1.5, 1.5 )


    See also: SetXSecWidth, SetXSecHeight
    :param [in]: xsec_id string XSec ID
    :param [in]: w double Xsec width
    :param [in]: h double Xsec height
    """
    return _vsp_g.SetXSecWidthHeight(xsec_id, w, h)

def SetXSecWidth(xsec_id, w):
    r"""
    Set the width of an XSec. Note that POINT type XSecs have a width and height of 0, regardless of what is input to SetXSecWidth.


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        # Identify XSec 2
        xsec_2 = GetXSec( xsec_surf, 2 )

        SetXSecWidth( xsec_2, 1.5 )


    See also: GetXSecWidth
    :param [in]: xsec_id string XSec ID
    :param [in]: w double Xsec width
    """
    return _vsp_g.SetXSecWidth(xsec_id, w)

def SetXSecHeight(xsec_id, h):
    r"""
    Set the height of an XSec. Note that POINT type XSecs have a width and height of 0, regardless of what is input to SetXSecHeight.


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        # Identify XSec 2
        xsec_2 = GetXSec( xsec_surf, 2 )

        SetXSecHeight( xsec_2, 1.5 )


    See also: GetXSecHeight
    :param [in]: xsec_id string XSec ID
    :param [in]: h double Xsec height
    """
    return _vsp_g.SetXSecHeight(xsec_id, h)

def GetXSecParmIDs(xsec_id):
    r"""
    Get all Parm IDs for specified XSec Parm Container


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        xsec_surf = GetXSecSurf( fuseid, 0 )

        xsec = GetXSec( xsec_surf, GetNumXSec( xsec_surf ) - 1 )

        parm_array = GetXSecParmIDs( xsec )

        if  len(parm_array) < 1 : print( "---> Error: API GetXSecParmIDs " )


    :param [in]: xsec_id string XSec ID
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of Parm IDs
    """
    return _vsp_g.GetXSecParmIDs(xsec_id)

def GetXSecParm(xsec_id, name):
    r"""
    Get a specific Parm ID from an Xsec


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        xsec_surf = GetXSecSurf( fuseid, 0 )

        ChangeXSecShape( xsec_surf, GetNumXSec( xsec_surf ) - 1, XS_ROUNDED_RECTANGLE )

        xsec = GetXSec( xsec_surf, GetNumXSec( xsec_surf ) - 1 )

        wid = GetXSecParm( xsec, "RoundedRect_Width" )

        if  not ValidParm( wid ) : print( "---> Error: API GetXSecParm " )


    :param [in]: xsec_id string XSec ID
    :param [in]: name string Parm name
    :rtype: string
    :return: string Parm ID
    """
    return _vsp_g.GetXSecParm(xsec_id, name)

def ReadFileXSec(xsec_id, file_name):
    r"""
    Read in XSec shape from fuselage (\*.fsx) file and set to the specified XSec. The XSec must be of type XS_FILE_FUSE.


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        xsec_surf = GetXSecSurf( fuseid, 0 )

        ChangeXSecShape( xsec_surf, 2, XS_FILE_FUSE )

        xsec = GetXSec( xsec_surf, 2 )

        vec_array = ReadFileXSec(xsec, "TestXSec.fxs")



    :param [in]: xsec_id string XSec ID
    :param [in]: file_name string Fuselage XSec file name
    :rtype: std::vector< vec3d,std::allocator< vec3d > >
    :return: vector<vec3d> Array of coordinate points read from the file and set to the XSec
    """
    return _vsp_g.ReadFileXSec(xsec_id, file_name)

def SetXSecPnts(xsec_id, pnt_vec):
    r"""
    Set the coordinate points for a specific XSec. The XSec must be of type XS_FILE_FUSE.


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        xsec_surf = GetXSecSurf( fuseid, 0 )

        ChangeXSecShape( xsec_surf, 2, XS_FILE_FUSE )

        xsec = GetXSec( xsec_surf, 2 )

        vec_array = ReadFileXSec(xsec, "TestXSec.fxs")


        if  len(vec_array) > 0 :
            vec_array[1] = vec_array[1] * 2.0
            vec_array[3] = vec_array[3] * 2.0

            SetXSecPnts( xsec, vec_array )


    :param [in]: xsec_id string XSec ID
    :param [in]: pnt_vec vector<vec3d> Vector of XSec coordinate points
    """
    return _vsp_g.SetXSecPnts(xsec_id, pnt_vec)

def ComputeXSecPnt(xsec_id, fract):
    r"""
    Compute 3D coordinate for a point on an XSec curve given the parameter value (U) along the curve


    .. code-block:: python

        #==== Add Geom ====//
        stack_id = AddGeom( "STACK" )

        #==== Get The XSec Surf ====//
        xsec_surf = GetXSecSurf( stack_id, 0 )

        xsec = GetXSec( xsec_surf, 2 )

        u_fract = 0.25

        pnt = ComputeXSecPnt(xsec, u_fract)



    :param [in]: xsec_id string XSec ID
    :param [in]: fract double Curve parameter value (range: 0 - 1)
    :rtype: :py:class:`vec3d`
    :return: vec3d 3D coordinate point
    """
    return _vsp_g.ComputeXSecPnt(xsec_id, fract)

def ComputeXSecTan(xsec_id, fract):
    r"""
    Compute the tangent vector of a point on an XSec curve given the parameter value (U) along the curve


    .. code-block:: python

        #==== Add Geom ====//
        stack_id = AddGeom( "STACK" )

        #==== Get The XSec Surf ====//
        xsec_surf = GetXSecSurf( stack_id, 0 )

        xsec = GetXSec( xsec_surf, 2 )

        u_fract = 0.25

        tan = ComputeXSecTan( xsec, u_fract )


    :param [in]: xsec_id string XSec ID
    :param [in]: fract double Curve parameter value (range: 0 - 1)
    :rtype: :py:class:`vec3d`
    :return: vec3d Tangent vector
    """
    return _vsp_g.ComputeXSecTan(xsec_id, fract)

def ResetXSecSkinParms(xsec_id):
    r"""
    Reset all skinning Parms for a specified XSec. Set top, bottom, left, and right strengths, slew, angle, and curvature to 0. Set all symmetry and equality conditions to false.


    .. code-block:: python

        fid = AddGeom( "FUSELAGE", "" )             # Add Fuselage

        xsec_surf = GetXSecSurf( fid, 0 )           # Get First (and Only) XSec Surf

        num_xsecs = GetNumXSec( xsec_surf )

        xsec = GetXSec( xsec_surf, 1 )

        SetXSecTanAngles( xsec, XSEC_BOTH_SIDES, 0.0, -1.0e12, -1.0e12, -1.0e12 )       # Set Tangent Angles At Cross Section
        SetXSecContinuity( xsec, 1 )                       # Set Continuity At Cross Section

        ResetXSecSkinParms( xsec )


    :param [in]: xsec_id string XSec ID
    """
    return _vsp_g.ResetXSecSkinParms(xsec_id)

def SetXSecContinuity(xsec_id, cx):
    r"""
    Set C-type continuity enforcement for a particular XSec


    .. code-block:: python

        fid = AddGeom( "FUSELAGE", "" )             # Add Fuselage

        xsec_surf = GetXSecSurf( fid, 0 )           # Get First (and Only) XSec Surf

        num_xsecs = GetNumXSec( xsec_surf )

        for i in range(num_xsecs):

            xsec = GetXSec( xsec_surf, i )

            SetXSecContinuity( xsec, 1 )                       # Set Continuity At Cross Section


    :param [in]: xsec_id string XSec ID
    :param [in]: cx int Continuity level (0, 1, or 2)
    """
    return _vsp_g.SetXSecContinuity(xsec_id, cx)

def SetXSecTanAngles(xsec_id, side, top, right, bottom, left):
    r"""
    Set the tangent angles for the specified XSec


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        num_xsecs = GetNumXSec( xsec_surf )

        for i in range(num_xsecs):

            xsec = GetXSec( xsec_surf, i )

            SetXSecTanAngles( xsec, XSEC_BOTH_SIDES, 10.0, -1.0e12, -1.0e12, -1.0e12 )       # Set Tangent Angles At Cross Section


    See also: XSEC_SIDES_TYPE
    :param [in]: xsec_id string XSec ID
    :param [in]: side int Side type enum (i.e. XSEC_BOTH_SIDES)
    :param [in]: top double Top angle (degrees)
    :param [in]: right double Right angle (degrees)
    :param [in]: bottom double Bottom angle (degrees)
    :param [in]: left double Left angle (degrees)
    """
    return _vsp_g.SetXSecTanAngles(xsec_id, side, top, right, bottom, left)

def SetXSecTanSlews(xsec_id, side, top, right, bottom, left):
    r"""
    Set the tangent slew angles for the specified XSec


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        num_xsecs = GetNumXSec( xsec_surf )

        for i in range(num_xsecs):

            xsec = GetXSec( xsec_surf, i )

            SetXSecTanSlews( xsec, XSEC_BOTH_SIDES, 5.0, -1.0e12, -1.0e12, -1.0e12 )       # Set Tangent Slews At Cross Section


    See also: XSEC_SIDES_TYPE
    :param [in]: xsec_id string XSec ID
    :param [in]: side int Side type enum (i.e. XSEC_BOTH_SIDES)
    :param [in]: top double Top angle (degrees)
    :param [in]: right double Right angle (degrees)
    :param [in]: bottom double Bottom angle (degrees)
    :param [in]: left double Left angle (degrees)
    """
    return _vsp_g.SetXSecTanSlews(xsec_id, side, top, right, bottom, left)

def SetXSecTanStrengths(xsec_id, side, top, right, bottom, left):
    r"""
    Set the tangent strengths for the specified XSec


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        # Flatten ends
        num_xsecs = GetNumXSec( xsec_surf )

        for i in range(num_xsecs):

            xsec = GetXSec( xsec_surf, i )

            SetXSecTanStrengths( xsec, XSEC_BOTH_SIDES, 0.8, -1.0e12, -1.0e12, -1.0e12 )  # Set Tangent Strengths At Cross Section


    See also: XSEC_SIDES_TYPE
    :param [in]: xsec_id string XSec ID
    :param [in]: side int Side type enum (i.e. XSEC_BOTH_SIDES)
    :param [in]: top double Top strength
    :param [in]: right double Right strength
    :param [in]: bottom double Bottom strength
    :param [in]: left double Left strength
    """
    return _vsp_g.SetXSecTanStrengths(xsec_id, side, top, right, bottom, left)

def SetXSecCurvatures(xsec_id, side, top, right, bottom, left):
    r"""
    Set curvatures for the specified XSec


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        # Flatten ends
        num_xsecs = GetNumXSec( xsec_surf )

        for i in range(num_xsecs):

            xsec = GetXSec( xsec_surf, i )

            SetXSecCurvatures( xsec, XSEC_BOTH_SIDES, 0.2, -1.0e12, -1.0e12, -1.0e12 )  # Set Tangent Strengths At Cross Section


    See also: XSEC_SIDES_TYPE
    :param [in]: xsec_id string XSec ID
    :param [in]: side int Side type enum (i.e. XSEC_BOTH_SIDES)
    :param [in]: top double Top curvature
    :param [in]: right double Right curvature
    :param [in]: bottom double Bottom curvature
    :param [in]: left double Left curvature
    """
    return _vsp_g.SetXSecCurvatures(xsec_id, side, top, right, bottom, left)

def ReadFileAirfoil(xsec_id, file_name):
    r"""
    Read in XSec shape from airfoil file and set to the specified XSec. The XSec must be of type XS_FILE_AIRFOIL. Airfoil files may be in Lednicer or Selig format with \*.af or \*.dat extensions.


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        xsec_surf = GetXSecSurf( fuseid, 0 )

        ChangeXSecShape( xsec_surf, 1, XS_FILE_AIRFOIL )

        xsec = GetXSec( xsec_surf, 1 )

        ReadFileAirfoil( xsec, "airfoil/N0012_VSP.af" )


    :param [in]: xsec_id string XSec ID
    :param [in]: file_name string Airfoil XSec file name
    """
    return _vsp_g.ReadFileAirfoil(xsec_id, file_name)

def SetAirfoilUpperPnts(xsec_id, up_pnt_vec):
    r"""
    Set the upper points for an airfoil. The XSec must be of type XS_FILE_AIRFOIL.


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        xsec_surf = GetXSecSurf( fuseid, 0 )

        ChangeXSecShape( xsec_surf, 1, XS_FILE_AIRFOIL )

        xsec = GetXSec( xsec_surf, 1 )

        ReadFileAirfoil( xsec, "airfoil/N0012_VSP.af" )

        up_array = GetAirfoilUpperPnts( xsec )

        for i in range(int( len(up_array) )):

            up_array[i].scale_y( 2.0 )

        SetAirfoilUpperPnts( xsec, up_array )


    :param [in]: xsec_id string XSec ID
    :param [in]: up_pnt_vec vector<vec3d> Array of points defining the upper surface of the airfoil
    """
    return _vsp_g.SetAirfoilUpperPnts(xsec_id, up_pnt_vec)

def SetAirfoilLowerPnts(xsec_id, low_pnt_vec):
    r"""
    Set the lower points for an airfoil. The XSec must be of type XS_FILE_AIRFOIL.


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        xsec_surf = GetXSecSurf( fuseid, 0 )

        ChangeXSecShape( xsec_surf, 1, XS_FILE_AIRFOIL )

        xsec = GetXSec( xsec_surf, 1 )

        ReadFileAirfoil( xsec, "airfoil/N0012_VSP.af" )

        low_array = GetAirfoilLowerPnts( xsec )

        for i in range(int( len(low_array) )):

            low_array[i].scale_y( 0.5 )

        SetAirfoilUpperPnts( xsec, low_array )


    :param [in]: xsec_id string XSec ID
    :param [in]: low_pnt_vec vector<vec3d> Array of points defining the lower surface of the airfoil
    """
    return _vsp_g.SetAirfoilLowerPnts(xsec_id, low_pnt_vec)

def SetAirfoilPnts(xsec_id, up_pnt_vec, low_pnt_vec):
    r"""
    Set the upper and lower points for an airfoil. The XSec must be of type XS_FILE_AIRFOIL.


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        xsec_surf = GetXSecSurf( fuseid, 0 )

        ChangeXSecShape( xsec_surf, 1, XS_FILE_AIRFOIL )

        xsec = GetXSec( xsec_surf, 1 )

        ReadFileAirfoil( xsec, "airfoil/N0012_VSP.af" )

        up_array = GetAirfoilUpperPnts( xsec )

        low_array = GetAirfoilLowerPnts( xsec )

        for i in range(int( len(up_array) )):

            up_array[i].scale_y( 2.0 )

            low_array[i].scale_y( 0.5 )

        SetAirfoilPnts( xsec, up_array, low_array )


    :param [in]: xsec_id string XSec ID
    :param [in]: up_pnt_vec vector<vec3d> Array of points defining the upper surface of the airfoil
    :param [in]: low_pnt_vec vector<vec3d> Array of points defining the lower surface of the airfoil
    """
    return _vsp_g.SetAirfoilPnts(xsec_id, up_pnt_vec, low_pnt_vec)

def GetHersheyBarLiftDist(npts, alpha, Vinf, span, full_span_flag=False):
    r"""
    Get the theoretical lift (Cl) distribution for a Hershey Bar wing with unit chord length using Glauert's Method. This function was initially created to compare VSPAERO results to Lifting Line Theory.
    If full_span_flag is set to true symmetry is applied to the results.


    .. code-block:: python

        pi = 3.14159265358979323846
        # Compute theoretical lift and drag distributions using 100 points
        Vinf = 100

        halfAR = 20

        alpha_deg = 10

        n_pts = 100

        cl_dist_theo = GetHersheyBarLiftDist( int( n_pts ), alpha_deg*pi/180, Vinf, ( 2 * halfAR ), False )

        cd_dist_theo = GetHersheyBarDragDist( int( n_pts ), alpha_deg*pi/180, Vinf, ( 2 * halfAR ), False )


    :param [in]: npts int Number of points along the span to assess
    :param [in]: alpha double Wing angle of attack (Radians)
    :param [in]: Vinf double Freestream velocity
    :param [in]: span double Hershey Bar full-span. Note, only half is used in the calculation
    :param [in]: full_span_flag bool Flag to apply symmetry to results
    :rtype: std::vector< vec3d,std::allocator< vec3d > >
    :return: vector<vec3d> Theoretical coefficient of lift distribution array (size = 2*npts if full_span_flag = true)
    """
    return _vsp_g.GetHersheyBarLiftDist(npts, alpha, Vinf, span, full_span_flag)

def GetHersheyBarDragDist(npts, alpha, Vinf, span, full_span_flag=False):
    r"""
    Get the theoretical drag (Cd) distribution for a Hershey Bar wing with unit chord length using Glauert's Method. This function was initially created to compare VSPAERO results to Lifting Line Theory.
    If full_span_flag is set to true symmetry is applied to the results.


    .. code-block:: python

        pi = 3.14159265358979323846
        # Compute theoretical lift and drag distributions using 100 points
        Vinf = 100

        halfAR = 20

        alpha_deg = 10

        n_pts = 100

        cl_dist_theo = GetHersheyBarLiftDist( int( n_pts ), alpha_deg*pi/180, Vinf, ( 2 * halfAR ), False )

        cd_dist_theo = GetHersheyBarDragDist( int( n_pts ), alpha_deg*pi/180, Vinf, ( 2 * halfAR ), False )


    :param [in]: npts int Number of points along the span to assess
    :param [in]: alpha double Wing angle of attack (Radians)
    :param [in]: Vinf double Freestream velocity
    :param [in]: span double Hershey Bar full-span. Note, only half is used in the calculation
    :param [in]: full_span_flag bool Flag to apply symmetry to results (default: false)
    :rtype: std::vector< vec3d,std::allocator< vec3d > >
    :return: vector<vec3d> Theoretical coefficient of drag distribution array (size = 2*npts if full_span_flag = true)
    """
    return _vsp_g.GetHersheyBarDragDist(npts, alpha, Vinf, span, full_span_flag)

def GetVKTAirfoilPnts(npts, alpha, epsilon, kappa, tau):
    r"""
    Get the 2D coordinates an input number of points along a Von K�rm�n-Trefftz airfoil of specified shape


    .. code-block:: python

        pi = 3.14159265358979323846

        npts = 122

        alpha = 0.0

        epsilon = 0.1

        kappa = 0.1

        tau = 10

        xyz_airfoil = GetVKTAirfoilPnts(npts, alpha, epsilon, kappa, tau*(pi/180) )

        cp_dist = GetVKTAirfoilCpDist( alpha, epsilon, kappa, tau*(pi/180), xyz_airfoil )


    :param [in]: npts int Number of points along the airfoil to return
    :param [in]: alpha double Airfoil angle of attack (Radians)
    :param [in]: epsilon double Airfoil thickness
    :param [in]: kappa double Airfoil camber
    :param [in]: tau double Airfoil trailing edge angle (Radians)
    :rtype: std::vector< vec3d,std::allocator< vec3d > >
    :return: vector<vec3d> Array of points on the VKT airfoil (size = npts)
    """
    return _vsp_g.GetVKTAirfoilPnts(npts, alpha, epsilon, kappa, tau)

def GetVKTAirfoilCpDist(alpha, epsilon, kappa, tau, xyz_data):
    r"""
    Get the pressure coefficient (Cp) along a Von Kármán-Trefftz airfoil of specified shape at specified points along the airfoil


    .. code-block:: python

        pi = 3.14159265358979323846

        npts = 122

        alpha = 0.0

        epsilon = 0.1

        kappa = 0.1

        tau = 10

        xyz_airfoil = GetVKTAirfoilPnts(npts, alpha, epsilon, kappa, tau*(pi/180) )

        cp_dist = GetVKTAirfoilCpDist( alpha, epsilon, kappa, tau*(pi/180), xyz_airfoil )


    See also: GetVKTAirfoilPnts
    :param [in]: alpha double Airfoil angle of attack (Radians)
    :param [in]: epsilon double Airfoil thickness
    :param [in]: kappa double Airfoil camber
    :param [in]: tau double Airfoil trailing edge angle (Radians)
    :param [in]: xyz_data vector<vec3d> Vector of points on the airfoil to evaluate
    :rtype: std::vector< double,std::allocator< double > >
    :return: vector<double> Vector of Cp values for each point in xydata
    """
    return _vsp_g.GetVKTAirfoilCpDist(alpha, epsilon, kappa, tau, xyz_data)

def GetEllipsoidSurfPnts(center, abc_rad, u_npts=20, w_npts=20):
    r"""
    Generate the surface coordinate points for a ellipsoid at specified center of input radius along each axis.
    Based on the MATLAB function ellipsoid (https://in.mathworks.com/help/matlab/ref/ellipsoid.html).
    See also: GetVKTAirfoilPnts
    :param [in]: center vec3d 3D location of the ellipsoid center
    :param [in]: abc_rad vec3d Radius along the A (X), B (Y), and C (Z) axes
    :param [in]: u_npts int Number of points in the U direction
    :param [in]: w_npts int Number of points in the W direction
    :rtype: std::vector< vec3d,std::allocator< vec3d > >
    :return: vector<vec3d> Array of coordinates describing the ellipsoid surface
    """
    return _vsp_g.GetEllipsoidSurfPnts(center, abc_rad, u_npts, w_npts)

def GetFeatureLinePnts(geom_id):
    r"""
    Get the points along the feature lines of a particular Geom
    :param [in]: geom_id string Geom ID
    :rtype: std::vector< vec3d,std::allocator< vec3d > >
    :return: vector<vec3d> Array of points along the Geom's feature lines
    """
    return _vsp_g.GetFeatureLinePnts(geom_id)

def GetEllipsoidCpDist(surf_pnt_vec, abc_rad, V_inf):
    r"""
    Generate Analytical Solution for Potential Flow for specified ellipsoid shape at input surface points for input velocity vector.
    Based on Munk, M. M., 'Remarks on the Pressure Distribution over the Surface of an Ellipsoid, Moving Translationally Through a Perfect
    Fluid,' NACA TN-196, June 1924. Function initially created to compare VSPAERO results to theory.


    .. code-block:: python

        import math
        pi = 3.14159265358979323846

        npts = 101

        abc_rad = vec3d(1.0, 2.0, 3.0)

        alpha = 5 # deg

        beta = 5 # deg

        V_inf = 100.0

        x_slice_pnt_vec = [None]*npts
        theta_vec = [None]*npts

        theta_vec[0] = 0

        for i in range(1, npts):
            theta_vec[i] = theta_vec[i-1] + (2 * pi / (npts - 1))


        for i in range(npts):

            x_slice_pnt_vec[i] = vec3d( 0, abc_rad.y() * math.cos( theta_vec[i] ), abc_rad.z() * math.sin( theta_vec[i] ) )

        V_vec = vec3d( ( V_inf * math.cos( alpha*pi/180 ) * math.cos( beta*pi/180 ) ), ( V_inf * math.sin( beta*pi/180 ) ), ( V_inf * math.sin( alpha*pi/180 ) * math.cos( beta*pi/180 ) ) )

        cp_dist = GetEllipsoidCpDist( x_slice_pnt_vec, abc_rad, V_vec )


    See also: GetEllipsoidSurfPnts
    :param [in]: surf_pnt_vec vector<vec3d> Vector of points on the ellipsoid surface to assess
    :param [in]: abc_rad vec3d Radius along the A (X), B (Y), and C (Z) axes
    :param [in]: V_inf vec3d 3D components of freestream velocity
    :rtype: std::vector< double,std::allocator< double > >
    :return: vector<double> Vector of Cp results corresponding to each point in surf_pnt_arr
    """
    return _vsp_g.GetEllipsoidCpDist(surf_pnt_vec, abc_rad, V_inf)

def IntegrateEllipsoidFlow(abc_rad, abc_index):
    r"""IntegrateEllipsoidFlow(vec3d abc_rad, int const & abc_index) -> double"""
    return _vsp_g.IntegrateEllipsoidFlow(abc_rad, abc_index)

def GetAirfoilUpperPnts(xsec_id):
    r"""
    Get the coordinate points for the upper surface of an airfoil. The XSec must be of type XS_FILE_AIRFOIL


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        xsec_surf = GetXSecSurf( fuseid, 0 )

        ChangeXSecShape( xsec_surf, 1, XS_FILE_AIRFOIL )

        xsec = GetXSec( xsec_surf, 1 )

        ReadFileAirfoil( xsec, "airfoil/N0012_VSP.af" )

        up_array = GetAirfoilUpperPnts( xsec )


    See also: SetAirfoilPnts
    :param [in]: xsec_id string XSec ID
    :rtype: std::vector< vec3d,std::allocator< vec3d > >
    :return: vector<vec3d> VectorArray of coordinate points for the upper airfoil surface
    """
    return _vsp_g.GetAirfoilUpperPnts(xsec_id)

def GetAirfoilLowerPnts(xsec_id):
    r"""
    Get the coordinate points for the lower surface of an airfoil. The XSec must be of type XS_FILE_AIRFOIL


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        xsec_surf = GetXSecSurf( fuseid, 0 )

        ChangeXSecShape( xsec_surf, 1, XS_FILE_AIRFOIL )

        xsec = GetXSec( xsec_surf, 1 )

        ReadFileAirfoil( xsec, "airfoil/N0012_VSP.af" )

        low_array = GetAirfoilLowerPnts( xsec )


    See also: SetAirfoilPnts
    :param [in]: xsec_id string XSec ID
    :rtype: std::vector< vec3d,std::allocator< vec3d > >
    :return: vector<vec3d> Vector of coordinate points for the lower airfoil surface
    """
    return _vsp_g.GetAirfoilLowerPnts(xsec_id)

def GetUpperCSTCoefs(xsec_id):
    r"""
    Get the CST coefficients for the upper surface of an airfoil. The XSec must be of type XS_CST_AIRFOIL
    See also: SetUpperCST
    :param [in]: xsec_id string XSec ID
    :rtype: std::vector< double,std::allocator< double > >
    :return: vector<double> Vector of CST coefficients for the upper airfoil surface
    """
    return _vsp_g.GetUpperCSTCoefs(xsec_id)

def GetLowerCSTCoefs(xsec_id):
    r"""
    Get the CST coefficients for the lower surface of an airfoil. The XSec must be of type XS_CST_AIRFOIL
    See also: SetLowerCST
    :param [in]: xsec_id string XSec ID
    :rtype: std::vector< double,std::allocator< double > >
    :return: vector<double> Vector of CST coefficients for the lower airfoil surface
    """
    return _vsp_g.GetLowerCSTCoefs(xsec_id)

def GetUpperCSTDegree(xsec_id):
    r"""
    Get the CST degree for the upper surface of an airfoil. The XSec must be of type XS_CST_AIRFOIL
    See also: SetUpperCST
    :param [in]: xsec_id string XSec ID
    :rtype: int
    :return: int CST Degree for upper airfoil surface
    """
    return _vsp_g.GetUpperCSTDegree(xsec_id)

def GetLowerCSTDegree(xsec_id):
    r"""
    Get the CST degree for the lower surface of an airfoil. The XSec must be of type XS_CST_AIRFOIL
    See also: SetLowerCST
    :param [in]: xsec_id string XSec ID
    :rtype: int
    :return: int CST Degree for lower airfoil surface
    """
    return _vsp_g.GetLowerCSTDegree(xsec_id)

def SetUpperCST(xsec_id, deg, coefs):
    r"""
    Set the CST degree and coefficients for the upper surface of an airfoil. The number of coefficients should be one more than the CST degree. The XSec must be of type XS_CST_AIRFOIL
    See also: GetUpperCSTDegree, GetUpperCSTCoefs
    :param [in]: xsec_id string XSec ID
    :param [in]: deg int CST degree of upper airfoil surface
    :param [in]: coefs vector<double> Vector of CST coefficients for the upper airfoil surface
    """
    return _vsp_g.SetUpperCST(xsec_id, deg, coefs)

def SetLowerCST(xsec_id, deg, coefs):
    r"""
    Set the CST degree and coefficients for the lower surface of an airfoil. The number of coefficients should be one more than the CST degree. The XSec must be of type XS_CST_AIRFOIL
    See also: GetLowerCSTDegree, GetLowerCSTCoefs
    :param [in]: xsec_id string XSec ID
    :param [in]: deg int CST degree of lower airfoil surface
    :param [in]: coefs vector<double> Vector of CST coefficients for the lower airfoil surface
    """
    return _vsp_g.SetLowerCST(xsec_id, deg, coefs)

def PromoteCSTUpper(xsec_id):
    r"""
    Promote the CST for the upper airfoil surface. The XSec must be of type XS_CST_AIRFOIL
    See also: GetUpperCSTDegree
    :param [in]: xsec_id string XSec ID
    """
    return _vsp_g.PromoteCSTUpper(xsec_id)

def PromoteCSTLower(xsec_id):
    r"""
    Promote the CST for the lower airfoil surface. The XSec must be of type XS_CST_AIRFOIL
    See also: GetLowerCSTDegree
    :param [in]: xsec_id string XSec ID
    """
    return _vsp_g.PromoteCSTLower(xsec_id)

def DemoteCSTUpper(xsec_id):
    r"""
    Demote the CST for the upper airfoil surface. The XSec must be of type XS_CST_AIRFOIL
    See also: GetUpperCSTDegree
    :param [in]: xsec_id string XSec ID
    """
    return _vsp_g.DemoteCSTUpper(xsec_id)

def DemoteCSTLower(xsec_id):
    r"""
    Demote the CST for the lower airfoil surface. The XSec must be of type XS_CST_AIRFOIL
    See also: GetLowerCSTDegree
    :param [in]: xsec_id string XSec ID
    """
    return _vsp_g.DemoteCSTLower(xsec_id)

def FitAfCST(xsec_surf_id, xsec_index, deg):
    r"""
    Fit a CST airfoil for an existing airfoil of type XS_FOUR_SERIES, XS_SIX_SERIES, XS_FOUR_DIGIT_MOD, XS_FIVE_DIGIT, XS_FIVE_DIGIT_MOD, XS_ONE_SIX_SERIES, or XS_FILE_AIRFOIL.
    :param [in]: xsec_surf_id string XsecSurf ID
    :param [in]: xsec_index int XSec index
    :param [in]: deg int CST degree
    """
    return _vsp_g.FitAfCST(xsec_surf_id, xsec_index, deg)

def AddBackground3D():
    r"""
    Add a Background3D to model


    .. code-block:: python

        nbg = GetNumBackground3Ds()

        # Add Background3D
        bg_id = AddBackground3D()

        if GetNumBackground3Ds() != nbg + 1 :
            print( "ERROR: AddBackground3D" )

        DelBackground3D( bg_id )

    :rtype: string
    :return: string ID for added Background3D
    """
    return _vsp_g.AddBackground3D()

def GetNumBackground3Ds():
    r"""
    Get Number of Background3D's in a model


    .. code-block:: python

        nbg = GetNumBackground3Ds()

        # Add Background3D
        bg_id = AddBackground3D()

        if GetNumBackground3Ds() != nbg + 1 :
            print( "ERROR: AddBackground3D" )

        DelBackground3D( bg_id )

    :rtype: int
    :return: int Number of Background3D's in model
    """
    return _vsp_g.GetNumBackground3Ds()

def GetAllBackground3Ds():
    r"""
    Get id's of all Background3Ds in model


    .. code-block:: python

        nbg = GetNumBackground3Ds()

        # Add Background3D
        AddBackground3D()
        AddBackground3D()
        AddBackground3D()

        if GetNumBackground3Ds() != nbg + 3 :
            print( "ERROR: AddBackground3D" )

        bg_array = GetAllBackground3Ds()

        for n in range( len( bg_array ) ):
            print( bg_array[n] )

        DelAllBackground3Ds()

    :rtype: vector< string >
    :return: vector<string> Vector of Background3D IDs
    """
    return _vsp_g.GetAllBackground3Ds()

def ShowAllBackground3Ds():
    r"""
    Show all Background3Ds in model


    .. code-block:: python

        # Add Background3D
        AddBackground3D()
        AddBackground3D()
        AddBackground3D()

        ShowAllBackground3Ds()

        DelAllBackground3Ds()

    """
    return _vsp_g.ShowAllBackground3Ds()

def HideAllBackground3Ds():
    r"""
    Hide all Background3Ds in model


    .. code-block:: python

        # Add Background3D
        AddBackground3D()
        AddBackground3D()
        AddBackground3D()

        HideAllBackground3Ds()

        DelAllBackground3Ds()

    """
    return _vsp_g.HideAllBackground3Ds()

def DelAllBackground3Ds():
    r"""
    Delete all Background3Ds in model


    .. code-block:: python

        # Add Background3D
        AddBackground3D()
        AddBackground3D()
        AddBackground3D()

        DelAllBackground3Ds()

        nbg = GetNumBackground3Ds()

        if nbg != 0 :
            print( "ERROR: DelAllBackground3Ds" )


    """
    return _vsp_g.DelAllBackground3Ds()

def DelBackground3D(id):
    r"""
    Delete specific Background3D frommodel


    .. code-block:: python

        # Add Background3D
        AddBackground3D()
        bg_id = AddBackground3D()
        AddBackground3D()

        nbg = GetNumBackground3Ds()

        DelBackground3D( bg_id )

        if GetNumBackground3Ds() != nbg -1 :
            print( "ERROR: DelBackground3D" )


    :param [in]: id string Background3D ID to delete
    """
    return _vsp_g.DelBackground3D(id)

def GetAllBackground3DRelativePaths():
    r"""
    Get relative paths to all Background3D images in model.  Note that path is relative to the model's \*.vsp3 file.
    Consequently, if a file has not yet been saved or assigned a file name, the relative path is meaningless.


    .. code-block:: python

        # Add Background3D
        AddBackground3D()
        AddBackground3D()
        AddBackground3D()

        bg_file_array = GetAllBackground3DRelativePaths()

        for n in range( len( bg_file_array ) ):
            print( bg_file_array[n] )

        DelAllBackground3Ds()

    :rtype: vector< string >
    :return: vector<string> Vector of relative paths to Background3D image files
    """
    return _vsp_g.GetAllBackground3DRelativePaths()

def GetAllBackground3DAbsolutePaths():
    r"""
    Get absolute paths to all Background3D images in model.


    .. code-block:: python

        # Add Background3D
        AddBackground3D()
        AddBackground3D()
        AddBackground3D()

        bg_file_array = GetAllBackground3DAbsolutePaths()

        for n in range( len( bg_file_array ) ):
            print( bg_file_array[n] )

        DelAllBackground3Ds()

    :rtype: vector< string >
    :return: vector<string> Vector of absolute paths to Background3D image files
    """
    return _vsp_g.GetAllBackground3DAbsolutePaths()

def GetBackground3DRelativePath(id):
    r"""
    Get relative path to specified Background3D's image.  Note that path is relative to the model's \*.vsp3 file.
    Consequently, if a file has not yet been saved or assigned a file name, the relative path is meaningless.


    .. code-block:: python

        # Add Background3D
        bg_id = AddBackground3D()

        SetBackground3DRelativePath( bg_id, "front.png" )
        bg_file = GetBackground3DRelativePath( bg_id )

        print( bg_file )

        DelAllBackground3Ds()

    :param [in]: id string Background3D ID
    :rtype: string
    :return: string Relative path to Background3D image file
    """
    return _vsp_g.GetBackground3DRelativePath(id)

def GetBackground3DAbsolutePath(id):
    r"""
    Get absolute path to specified Background3D's image.


    .. code-block:: python

        # Add Background3D
        bg_id = AddBackground3D()

        SetBackground3DAbsolutePath( bg_id, "/user/me/vsp_work/front.png" )
        bg_file = GetBackground3DAbsolutePath( bg_id )

        print( bg_file )

        DelAllBackground3Ds()

    :param [in]: id string Background3D ID
    :rtype: string
    :return: string Absolute path to Background3D image file
    """
    return _vsp_g.GetBackground3DAbsolutePath(id)

def SetBackground3DRelativePath(id, fname):
    r"""
    Set relative path to specified Background3D's image.  Note that path is relative to the model's \*.vsp3 file.
    Consequently, if a file has not yet been saved or assigned a file name, the relative path is meaningless.


    .. code-block:: python

        # Add Background3D
        bg_id = AddBackground3D()

        SetBackground3DRelativePath( bg_id, "front.png" )
        bg_file = GetBackground3DRelativePath( bg_id )

        print( bg_file )

        DelAllBackground3Ds()

    :param [in]: id string Background3D ID
    :param [in]: fname string Relative path to Background3D image file
    """
    return _vsp_g.SetBackground3DRelativePath(id, fname)

def SetBackground3DAbsolutePath(id, fname):
    r"""
    Set absolute path to specified Background3D's image.


    .. code-block:: python

        # Add Background3D
        bg_id = AddBackground3D()

        SetBackground3DAbsolutePath( bg_id, "front.png" )
        bg_file = GetBackground3DAbsolutePath( bg_id )

        print( bg_file )

        DelAllBackground3Ds()

    :param [in]: id string Background3D ID
    :param [in]: fname string Absolute path to Background3D image file
    """
    return _vsp_g.SetBackground3DAbsolutePath(id, fname)

def CreateAndAddBogie(gear_id):
    r"""
    Create a new Bogie and add it to the end of the Bogie list of the specified GearGeom.  A GearGeom's landing
    gear is described by its list of Bogies.  Each Bogie is a ParmContainer, so once you have the returned Bogie
    ID you can query and set its Parms with the normal Parm API functions.


    .. code-block:: python

        gear_id = AddGeom( "GEAR", "" )             # Add a landing gear Geom

        bogie_id = CreateAndAddBogie( gear_id )     # Create and add a Bogie

        # Bogies are ParmContainers -- work with their Parms once you have the ID.
        SetParmVal( bogie_id, "NumAcross", "Bogie", 2 )    # Two wheels across
        SetParmVal( bogie_id, "NumTandem", "Bogie", 2 )    # Two wheels in tandem

    See also: GetAllBogies, GetNumBogies, DelBogie, DelAllBogies
    :param [in]: gear_id string GearGeom Geom ID
    :rtype: string
    :return: string ParmContainer ID for the newly added Bogie
    """
    return _vsp_g.CreateAndAddBogie(gear_id)

def GetNumBogies(gear_id):
    r"""
    Get the number of Bogies in the specified GearGeom.


    .. code-block:: python

        gear_id = AddGeom( "GEAR", "" )

        CreateAndAddBogie( gear_id )
        CreateAndAddBogie( gear_id )

        num_bogie = GetNumBogies( gear_id )            # num_bogie == 2

    See also: CreateAndAddBogie, GetAllBogies
    :param [in]: gear_id string GearGeom Geom ID
    :rtype: int
    :return: int Number of Bogies in the specified GearGeom
    """
    return _vsp_g.GetNumBogies(gear_id)

def GetAllBogies(gear_id):
    r"""
    Get the ParmContainer IDs of all the Bogies in the specified GearGeom, in list order.


    .. code-block:: python

        gear_id = AddGeom( "GEAR", "" )

        CreateAndAddBogie( gear_id )
        CreateAndAddBogie( gear_id )

        bogie_ids = GetAllBogies( gear_id )

    See also: CreateAndAddBogie, GetNumBogies, DelBogie
    :param [in]: gear_id string GearGeom Geom ID
    :rtype: vector< string >
    :return: vector<string> Vector of Bogie ParmContainer IDs
    """
    return _vsp_g.GetAllBogies(gear_id)

def DelBogie(gear_id, bogie_id):
    r"""
    Delete the specified Bogie from the specified GearGeom.


    .. code-block:: python

        gear_id = AddGeom( "GEAR", "" )

        bogie_id = CreateAndAddBogie( gear_id )

        DelBogie( gear_id, bogie_id )

    See also: CreateAndAddBogie, DelAllBogies
    :param [in]: gear_id string GearGeom Geom ID
    :param [in]: bogie_id string Bogie ParmContainer ID
    """
    return _vsp_g.DelBogie(gear_id, bogie_id)

def DelAllBogies(gear_id):
    r"""
    Delete all Bogies from the specified GearGeom.


    .. code-block:: python

        gear_id = AddGeom( "GEAR", "" )

        CreateAndAddBogie( gear_id )
        CreateAndAddBogie( gear_id )

        DelAllBogies( gear_id )                            # GetNumBogies( gear_id ) == 0

    See also: CreateAndAddBogie, DelBogie
    :param [in]: gear_id string GearGeom Geom ID
    """
    return _vsp_g.DelAllBogies(gear_id)

def GetNumRoutingPts(routing_id):
    r"""
    Get the number of routing points in a RoutingGeom


    .. code-block:: python

        pod1 = vsp.AddGeom('POD', '')

        pod2 = vsp.AddGeom('POD', '')
        ypod2 = vsp.GetParm(pod2, 'Y_Rel_Location', 'XForm')
        vsp.SetParmVal(ypod2, 2.0)

        routing_geom = vsp.AddGeom('ROUTING', '')

        rpt0 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u0 = vsp.GetParm( rpt0, 'U', 'RoutePt')
        vsp.SetParmVal(u0, 0.0)

        rpt1 = vsp.AddRoutingPt(routing_geom, pod2, 0)

        rpt2 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u2 = vsp.GetParm( rpt2, 'U', 'RoutePt')
        vsp.SetParmVal(u2, 1.0)

        npt = vsp.GetNumRoutingPts(routing_geom)

    See also: AddRoutingPt, DelRoutingPt
    :param [in]: routing_id string RoutingGeom Geom ID
    :rtype: int
    :return: int Number of routing points in specified RoutingGeom
    """
    return _vsp_g.GetNumRoutingPts(routing_id)

def AddRoutingPt(routing_id, geom_id, surf_index):
    r"""
    Add a routing point to a RoutingGeom.  The new point will be the last point in the route.  The new point will be
    anchored to the specified geom and surface.


    .. code-block:: python

        pod1 = vsp.AddGeom('POD', '')

        pod2 = vsp.AddGeom('POD', '')
        ypod2 = vsp.GetParm(pod2, 'Y_Rel_Location', 'XForm')
        vsp.SetParmVal(ypod2, 2.0)

        routing_geom = vsp.AddGeom('ROUTING', '')

        rpt0 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u0 = vsp.GetParm( rpt0, 'U', 'RoutePt')
        vsp.SetParmVal(u0, 0.0)

        rpt1 = vsp.AddRoutingPt(routing_geom, pod2, 0)

        rpt2 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u2 = vsp.GetParm( rpt2, 'U', 'RoutePt')
        vsp.SetParmVal(u2, 1.0)

    See also: AddRoutingPt, DelRoutingPt, InsertRoutingPt
    :param [in]: routing_id string RoutingGeom Geom ID
    :param [in]: geom_id string Geom ID of geom to anchor new routing point to
    :param [in]: surf_index int Index of surf to anchor new routing point to
    :rtype: string
    :return: string ParmContainer ID for the newly added routing point
    """
    return _vsp_g.AddRoutingPt(routing_id, geom_id, surf_index)

def InsertRoutingPt(routing_id, index, geom_id, surf_index):
    r"""
    Add a routing point to a RoutingGeom.  The new point will be inserted before the specified index.  The new point
    will be anchored to the specified geom and surface.


    .. code-block:: python

        pod1 = vsp.AddGeom('POD', '')

        pod2 = vsp.AddGeom('POD', '')
        ypod2 = vsp.GetParm(pod2, 'Y_Rel_Location', 'XForm')
        vsp.SetParmVal(ypod2, 2.0)

        routing_geom = vsp.AddGeom('ROUTING', '')

        rpt0 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u0 = vsp.GetParm( rpt0, 'U', 'RoutePt')
        vsp.SetParmVal(u0, 0.0)

        rpt1 = vsp.AddRoutingPt(routing_geom, pod2, 0)

        rpt2 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u2 = vsp.GetParm( rpt2, 'U', 'RoutePt')
        vsp.SetParmVal(u2, 1.0)

        npt = vsp.GetNumRoutingPts(routing_geom)
        rptPre2 = vsp.InsertRoutingPt(routing_geom, 2, pod2, 0)
        uPre2 = vsp.GetParm( rptPre2, 'U', 'RoutePt')
        vsp.SetParmVal(uPre2, 0.)

    See also: AddRoutingPt, DelRoutingPt
    :param [in]: routing_id string RoutingGeom Geom ID
    :param [in]: index int Index of routing point to insert new point before
    :param [in]: geom_id string Geom ID of geom to anchor new routing point to
    :param [in]: surf_index int Index of surf to anchor new routing point to
    :rtype: string
    :return: string ParmContainer ID for the newly added routing point
    """
    return _vsp_g.InsertRoutingPt(routing_id, index, geom_id, surf_index)

def DelRoutingPt(routing_id, index):
    r"""
    Delete a specified routing point from a RoutingGeom.


    .. code-block:: python

        pod1 = vsp.AddGeom('POD', '')

        pod2 = vsp.AddGeom('POD', '')
        ypod2 = vsp.GetParm(pod2, 'Y_Rel_Location', 'XForm')
        vsp.SetParmVal(ypod2, 2.0)

        routing_geom = vsp.AddGeom('ROUTING', '')

        rpt0 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u0 = vsp.GetParm( rpt0, 'U', 'RoutePt')
        vsp.SetParmVal(u0, 0.0)

        rpt1 = vsp.AddRoutingPt(routing_geom, pod2, 0)

        rpt2 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u2 = vsp.GetParm( rpt2, 'U', 'RoutePt')
        vsp.SetParmVal(u2, 1.0)

        vsp.DelRoutingPt( routing_geom, 1 )

    See also: AddRoutingPt, DelAllRoutingPt
    :param [in]: routing_id string RoutingGeom Geom ID
    :param [in]: index int Index of routing point to delete
    """
    return _vsp_g.DelRoutingPt(routing_id, index)

def DelAllRoutingPt(routing_id):
    r"""
    Delete all routing points from a RoutingGeom.


    .. code-block:: python

        pod1 = vsp.AddGeom('POD', '')

        pod2 = vsp.AddGeom('POD', '')
        ypod2 = vsp.GetParm(pod2, 'Y_Rel_Location', 'XForm')
        vsp.SetParmVal(ypod2, 2.0)

        routing_geom = vsp.AddGeom('ROUTING', '')

        rpt0 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u0 = vsp.GetParm( rpt0, 'U', 'RoutePt')
        vsp.SetParmVal(u0, 0.0)

        rpt1 = vsp.AddRoutingPt(routing_geom, pod2, 0)

        rpt2 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u2 = vsp.GetParm( rpt2, 'U', 'RoutePt')
        vsp.SetParmVal(u2, 1.0)

        vsp.DelAllRoutingPt( routing_geom )

    See also: AddRoutingPt, DelRoutingPt
    :param [in]: routing_id string RoutingGeom Geom ID
    """
    return _vsp_g.DelAllRoutingPt(routing_id)

def MoveRoutingPt(routing_id, index, reorder_type):
    r"""
    Move a specified routing point within the route of a RoutingGeom.


    .. code-block:: python

        pod1 = vsp.AddGeom('POD', '')

        pod2 = vsp.AddGeom('POD', '')
        ypod2 = vsp.GetParm(pod2, 'Y_Rel_Location', 'XForm')
        vsp.SetParmVal(ypod2, 2.0)

        routing_geom = vsp.AddGeom('ROUTING', '')

        rpt0 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u0 = vsp.GetParm( rpt0, 'U', 'RoutePt')
        vsp.SetParmVal(u0, 0.0)

        rpt1 = vsp.AddRoutingPt(routing_geom, pod2, 0)

        rpt2 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u2 = vsp.GetParm( rpt2, 'U', 'RoutePt')
        vsp.SetParmVal(u2, 1.0)

        newindx = vsp.MoveRoutingPt( routing_geom, 1, vsp.REORDER_MOVE_DOWN )

    See also: AddRoutingPt, DelRoutingPt, REORDER_TYPE
    :param [in]: routing_id string RoutingGeom Geom ID
    :param [in]: index int Index of routing point to move
    :param [in]: reorder_type int Enum specifying reordering type (i.e. REORDER_MOVE_UP, REORDER_MOVE_DOWN, REORDER_MOVE_TOP, REORDER_MOVE_BOTTOM)
    """
    return _vsp_g.MoveRoutingPt(routing_id, index, reorder_type)

def GetRoutingPtID(routing_id, index):
    r"""
    Get the ParmContainer ID of a routing point within a RoutingGeom.


    .. code-block:: python

        pod1 = vsp.AddGeom('POD', '')

        pod2 = vsp.AddGeom('POD', '')
        ypod2 = vsp.GetParm(pod2, 'Y_Rel_Location', 'XForm')
        vsp.SetParmVal(ypod2, 2.0)

        routing_geom = vsp.AddGeom('ROUTING', '')

        rpt0 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u0 = vsp.GetParm( rpt0, 'U', 'RoutePt')
        vsp.SetParmVal(u0, 0.0)

        rpt1 = vsp.AddRoutingPt(routing_geom, pod2, 0)

        rpt2 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u2 = vsp.GetParm( rpt2, 'U', 'RoutePt')
        vsp.SetParmVal(u2, 1.0)

        rid = vsp.GetRoutingPtID(routing_geom, 2)

    See also: AddRoutingPt, DelAllRoutingPt, GetAllRoutingPtIds
    :param [in]: routing_id string RoutingGeom Geom ID
    :param [in]: index int Index of routing point to ID to retreive
    :rtype: string
    :return: string ParmContainer ID for the specified routing point
    """
    return _vsp_g.GetRoutingPtID(routing_id, index)

def GetAllRoutingPtIds(routing_id):
    r"""
    Get the ParmContainer IDs of all the routing points within a RoutingGeom.  The vector will contain the IDs in order.


    .. code-block:: python

        pod1 = vsp.AddGeom('POD', '')

        pod2 = vsp.AddGeom('POD', '')
        ypod2 = vsp.GetParm(pod2, 'Y_Rel_Location', 'XForm')
        vsp.SetParmVal(ypod2, 2.0)

        routing_geom = vsp.AddGeom('ROUTING', '')

        rpt0 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u0 = vsp.GetParm( rpt0, 'U', 'RoutePt')
        vsp.SetParmVal(u0, 0.0)

        rpt1 = vsp.AddRoutingPt(routing_geom, pod2, 0)

        rpt2 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u2 = vsp.GetParm( rpt2, 'U', 'RoutePt')
        vsp.SetParmVal(u2, 1.0)

        rpts = vsp.GetAllRoutingPtIds(routing_geom)

    See also: AddRoutingPt, DelAllRoutingPt, GetRoutingPtId
    :param [in]: routing_id string RoutingGeom Geom ID
    :rtype: vector< string >
    :return: vector<string> Vector of routing point ParmConatiner IDs
    """
    return _vsp_g.GetAllRoutingPtIds(routing_id)

def GetRoutingPtParentID(pt_id):
    r"""
    Get the Geom ID of the geom a routing point is anchored to.


    .. code-block:: python

        pod1 = vsp.AddGeom('POD', '')

        pod2 = vsp.AddGeom('POD', '')
        ypod2 = vsp.GetParm(pod2, 'Y_Rel_Location', 'XForm')
        vsp.SetParmVal(ypod2, 2.0)

        routing_geom = vsp.AddGeom('ROUTING', '')

        rpt0 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u0 = vsp.GetParm( rpt0, 'U', 'RoutePt')
        vsp.SetParmVal(u0, 0.0)

        rpt1 = vsp.AddRoutingPt(routing_geom, pod2, 0)

        rpt2 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u2 = vsp.GetParm( rpt2, 'U', 'RoutePt')
        vsp.SetParmVal(u2, 1.0)

        gid = vsp.GetRoutingPtParentID(rpt1)

    See also: AddRoutingPt, DelAllRoutingPt, GetAllRoutingPtIds
    :param [in]: pt_id string ParmContainer ID of desired routing point
    :rtype: string
    :return: string Geom ID for the geom the routing point is anchored to
    """
    return _vsp_g.GetRoutingPtParentID(pt_id)

def SetRoutingPtParentID(pt_id, parent_id):
    r"""
    Set the Geom ID of the geom a routing point is anchored to.


    .. code-block:: python

        pod1 = vsp.AddGeom('POD', '')

        pod2 = vsp.AddGeom('POD', '')
        ypod2 = vsp.GetParm(pod2, 'Y_Rel_Location', 'XForm')
        vsp.SetParmVal(ypod2, 2.0)

        routing_geom = vsp.AddGeom('ROUTING', '')

        rpt0 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u0 = vsp.GetParm( rpt0, 'U', 'RoutePt')
        vsp.SetParmVal(u0, 0.0)

        rpt1 = vsp.AddRoutingPt(routing_geom, pod2, 0)

        rpt2 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u2 = vsp.GetParm( rpt2, 'U', 'RoutePt')
        vsp.SetParmVal(u2, 1.0)

        vsp.SetRoutingPtParentID(rpt1, pod1)

    See also: AddRoutingPt, DelAllRoutingPt, GetAllRoutingPtIds
    :param [in]: pt_id string ParmContainer ID of desired routing point
    :param [in]: parent_id string Geom ID for the geom to anchor the routing point to
    """
    return _vsp_g.SetRoutingPtParentID(pt_id, parent_id)

def GetMainRoutingPtCoord(pt_id):
    r"""
    Get the main coordinate location a routing point.  The main location is the location of the base copy before
    symmetry has been applied.


    .. code-block:: python

        pod1 = vsp.AddGeom('POD', '')

        pod2 = vsp.AddGeom('POD', '')
        ypod2 = vsp.GetParm(pod2, 'Y_Rel_Location', 'XForm')
        vsp.SetParmVal(ypod2, 2.0)

        routing_geom = vsp.AddGeom('ROUTING', '')

        rpt0 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u0 = vsp.GetParm( rpt0, 'U', 'RoutePt')
        vsp.SetParmVal(u0, 0.0)

        rpt1 = vsp.AddRoutingPt(routing_geom, pod2, 0)

        rpt2 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u2 = vsp.GetParm( rpt2, 'U', 'RoutePt')
        vsp.SetParmVal(u2, 1.0)

        vsp.Update()
        p1 = vsp.GetMainRoutingPtCoord(rpt1)

    See also: AddRoutingPt, DelRoutingPt, GetRoutingPtCoord, GetAllRoutingPtCoords, GetRoutingCurve
    :param [in]: pt_id string ParmContainer ID of desired routing point
    :rtype: :py:class:`vec3d`
    :return: vec3d coordinate of main routing point
    """
    return _vsp_g.GetMainRoutingPtCoord(pt_id)

def GetRoutingPtCoord(routing_id, index, symm_index):
    r"""
    Get the coordinate location a routing point in a RoutingGeom.  The main location is symm_index = 0.


    .. code-block:: python

        pod1 = vsp.AddGeom('POD', '')

        pod2 = vsp.AddGeom('POD', '')
        ypod2 = vsp.GetParm(pod2, 'Y_Rel_Location', 'XForm')
        vsp.SetParmVal(ypod2, 2.0)

        routing_geom = vsp.AddGeom('ROUTING', '')

        rpt0 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u0 = vsp.GetParm( rpt0, 'U', 'RoutePt')
        vsp.SetParmVal(u0, 0.0)

        rpt1 = vsp.AddRoutingPt(routing_geom, pod2, 0)

        rpt2 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u2 = vsp.GetParm( rpt2, 'U', 'RoutePt')
        vsp.SetParmVal(u2, 1.0)

        vsp.Update()
        p1 = vsp.GetRoutingPtCoord(rpt1, 1, 0)

    See also: AddRoutingPt, DelRoutingPt, GetMainRoutingPtCoord, GetAllRoutingPtCoords, GetRoutingCurve
    :param [in]: routing_id string RoutingGeom Geom ID
    :param [in]: index int Index of routing point to get cordinate of
    :param [in]: symm_index int Symmetry index to get coordinate of
    :rtype: :py:class:`vec3d`
    :return: vec3d coordinate of routing point
    """
    return _vsp_g.GetRoutingPtCoord(routing_id, index, symm_index)

def GetAllRoutingPtCoords(routing_id, symm_index):
    r"""
    Get the coordinate locations along a RoutingGeom.  The main copy is symm_index = 0.


    .. code-block:: python

        pod1 = vsp.AddGeom('POD', '')

        pod2 = vsp.AddGeom('POD', '')
        ypod2 = vsp.GetParm(pod2, 'Y_Rel_Location', 'XForm')
        vsp.SetParmVal(ypod2, 2.0)

        routing_geom = vsp.AddGeom('ROUTING', '')

        rpt0 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u0 = vsp.GetParm( rpt0, 'U', 'RoutePt')
        vsp.SetParmVal(u0, 0.0)

        rpt1 = vsp.AddRoutingPt(routing_geom, pod2, 0)

        rpt2 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u2 = vsp.GetParm( rpt2, 'U', 'RoutePt')
        vsp.SetParmVal(u2, 1.0)

        vsp.Update()
        pvec = vsp.GetAllRoutingPtCoords(rpt1, 0)

    See also: AddRoutingPt, DelRoutingPt, GetMainRoutingPtCoord, GetRoutingPtCoord, GetRoutingCurve
    :param [in]: routing_id string RoutingGeom Geom ID
    :param [in]: symm_index int Symmetry index to get coordinate of
    :rtype: vector< vec3d >
    :return: vector < vec3d > coordinate of routing points along RoutingGeom
    """
    return _vsp_g.GetAllRoutingPtCoords(routing_id, symm_index)

def GetRoutingCurve(routing_id, symm_index):
    r"""
    Get points along a RoutingGeom.  These points will follow the curve of a RoutingGeom with radiused
    routing points.  The main copy is symm_index = 0.


    .. code-block:: python

        pod1 = vsp.AddGeom('POD', '')

        pod2 = vsp.AddGeom('POD', '')
        ypod2 = vsp.GetParm(pod2, 'Y_Rel_Location', 'XForm')
        vsp.SetParmVal(ypod2, 2.0)

        routing_geom = vsp.AddGeom('ROUTING', '')

        rpt0 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u0 = vsp.GetParm( rpt0, 'U', 'RoutePt')
        vsp.SetParmVal(u0, 0.0)

        rpt1 = vsp.AddRoutingPt(routing_geom, pod2, 0)

        rpt2 = vsp.AddRoutingPt(routing_geom, pod1, 0)
        u2 = vsp.GetParm( rpt2, 'U', 'RoutePt')
        vsp.SetParmVal(u2, 1.0)

        vsp.Update()
        pvec = vsp.GetRoutingCurve(rpt1, 0)

    See also: AddRoutingPt, DelRoutingPt, GetMainRoutingPtCoord, GetRoutingPtCoord, GetAllRoutingPtCoords
    :param [in]: routing_id string RoutingGeom Geom ID
    :param [in]: symm_index int Symmetry index to get coordinate of
    :rtype: vector< vec3d >
    :return: vector < vec3d > coordinate of points along RoutingGeom curve
    """
    return _vsp_g.GetRoutingCurve(routing_id, symm_index)

def ChangeBORXSecShape(bor_id, type):
    r"""
    Set the XSec type for a BOR component


    .. code-block:: python

        # Add Body of Recolution
        bor_id = AddGeom( "BODYOFREVOLUTION", "" )

        ChangeBORXSecShape( bor_id, XS_ROUNDED_RECTANGLE )

        if  GetBORXSecShape( bor_id ) != XS_ROUNDED_RECTANGLE : print( "ERROR: ChangeBORXSecShape" )


    See also: XSEC_CRV_TYPE
    :param [in]: bor_id string Body of revolution Geom ID
    :param [in]: type int XSec type enum (i.e. XS_ROUNDED_RECTANGLE)
    """
    return _vsp_g.ChangeBORXSecShape(bor_id, type)

def GetBORXSecShape(bor_id):
    r"""
    Get the XSec type for a BOR component


    .. code-block:: python

        # Add Body of Recolution
        bor_id = AddGeom( "BODYOFREVOLUTION", "" )

        ChangeBORXSecShape( bor_id, XS_ROUNDED_RECTANGLE )

        if  GetBORXSecShape( bor_id ) != XS_ROUNDED_RECTANGLE : print( "ERROR: GetBORXSecShape" )


    :param [in]: bor_id string Body of revolution Geom ID
    :rtype: int
    :return: int XSec type enum (i.e. XS_ROUNDED_RECTANGLE)
    """
    return _vsp_g.GetBORXSecShape(bor_id)

def ReadBORFileXSec(bor_id, file_name):
    r"""
    Set the coordinate points for a specific BOR. The BOR XSecCurve must be of type XS_FILE_FUSE.


    .. code-block:: python

        # Add Body of Recolution
        bor_id = AddGeom( "BODYOFREVOLUTION", "" )

        ChangeBORXSecShape( bor_id, XS_FILE_FUSE )

        vec_array = ReadBORFileXSec( bor_id, "TestXSec.fxs" )


    :param [in]: bor_id string Body of revolution Geom ID
    :param [in]: file_name string Fuselage XSec file name
    :rtype: std::vector< vec3d,std::allocator< vec3d > >
    :return: vector<vec3d> Array of coordinate points read from the file and set to the XSec
    """
    return _vsp_g.ReadBORFileXSec(bor_id, file_name)

def SetBORXSecPnts(bor_id, pnt_vec):
    r"""
    Set the coordinate points for a specific BOR. The BOR XSecCurve must be of type XS_FILE_FUSE.


    .. code-block:: python

        # Add Body of Recolution
        bor_id = AddGeom( "BODYOFREVOLUTION", "" )

        ChangeBORXSecShape( bor_id, XS_FILE_FUSE )

        vec_array = ReadBORFileXSec( bor_id, "TestXSec.fxs" )

        if  len(vec_array) > 0 :
            vec_array[1] = vec_array[1] * 2.0
            vec_array[3] = vec_array[3] * 2.0

            SetBORXSecPnts( bor_id, vec_array )


    :param [in]: bor_id string Body of revolution Geom ID
    :param [in]: pnt_vec vector<vec3d> Vector of XSec coordinate points
    """
    return _vsp_g.SetBORXSecPnts(bor_id, pnt_vec)

def ComputeBORXSecPnt(bor_id, fract):
    r"""
    Compute 3D coordinate for a point on a BOR XSecCurve given the parameter value (U) along the curve


    .. code-block:: python

        #==== Add Geom ====//
        # Add Body of Recolution
        bor_id = AddGeom( "BODYOFREVOLUTION", "" )

        u_fract = 0.25

        pnt = ComputeBORXSecPnt( bor_id, u_fract )


    :param [in]: bor_id string Body of revolution Geom ID
    :param [in]: fract double Curve parameter value (range: 0 - 1)
    :rtype: :py:class:`vec3d`
    :return: vec3d Coordinate point on curve
    """
    return _vsp_g.ComputeBORXSecPnt(bor_id, fract)

def ComputeBORXSecTan(bor_id, fract):
    r"""
    Compute the tangent vector of a point on a BOR XSecCurve given the parameter value (U) along the curve


    .. code-block:: python

        # Add Body of Recolution
        bor_id = AddGeom( "BODYOFREVOLUTION", "" )

        u_fract = 0.25

        tan = ComputeBORXSecTan( bor_id, u_fract )


    :param [in]: bor_id string Body of revolution Geom ID
    :param [in]: fract double Curve parameter value (range: 0 - 1)
    :rtype: :py:class:`vec3d`
    :return: vec3d Tangent vector on curve
    """
    return _vsp_g.ComputeBORXSecTan(bor_id, fract)

def ReadBORFileAirfoil(bor_id, file_name):
    r"""
    Read in shape from airfoil file and set to the specified BOR XSecCurve. The XSecCurve must be of type XS_FILE_AIRFOIL. Airfoil files may be in Lednicer or Selig format with \*.af or \*.dat extensions.


    .. code-block:: python

        # Add Body of Recolution
        bor_id = AddGeom( "BODYOFREVOLUTION", "" )

        ChangeBORXSecShape( bor_id, XS_FILE_AIRFOIL )

        ReadBORFileAirfoil( bor_id, "airfoil/N0012_VSP.af" )


    :param [in]: bor_id string Body of revolution Geom ID
    :param [in]: file_name string Airfoil XSec file name
    """
    return _vsp_g.ReadBORFileAirfoil(bor_id, file_name)

def SetBORAirfoilUpperPnts(bor_id, up_pnt_vec):
    r"""
    Set the upper points for an airfoil on a BOR. The BOR XSecCurve must be of type XS_FILE_AIRFOIL.


    .. code-block:: python

        # Add Body of Recolution
        bor_id = AddGeom( "BODYOFREVOLUTION", "" )

        ChangeBORXSecShape( bor_id, XS_FILE_AIRFOIL )

        ReadBORFileAirfoil( bor_id, "airfoil/N0012_VSP.af" )

        up_array = GetBORAirfoilUpperPnts( bor_id )

        for i in range(int( len(up_array) )):

            up_array[i].scale_y( 2.0 )

        SetBORAirfoilUpperPnts( bor_id, up_array )


    :param [in]: bor_id string Body of revolution Geom ID
    :param [in]: up_pnt_vec vector<vec3d> Vector of points defining the upper surface of the airfoil
    """
    return _vsp_g.SetBORAirfoilUpperPnts(bor_id, up_pnt_vec)

def SetBORAirfoilLowerPnts(bor_id, low_pnt_vec):
    r"""
    Set the lower points for an airfoil on a BOR. The BOR XSecCurve must be of type XS_FILE_AIRFOIL.


    .. code-block:: python

        # Add Body of Recolution
        bor_id = AddGeom( "BODYOFREVOLUTION", "" )

        ChangeBORXSecShape( bor_id, XS_FILE_AIRFOIL )

        ReadBORFileAirfoil( bor_id, "airfoil/N0012_VSP.af" )

        low_array = GetBORAirfoilLowerPnts( bor_id )

        for i in range(int( len(low_array) )):

            low_array[i].scale_y( 0.5 )

        SetBORAirfoilLowerPnts( bor_id, low_array )


    :param [in]: bor_id string Body of revolution Geom ID
    :param [in]: low_pnt_vec vector<vec3d> Vector of points defining the lower surface of the airfoil
    """
    return _vsp_g.SetBORAirfoilLowerPnts(bor_id, low_pnt_vec)

def SetBORAirfoilPnts(bor_id, up_pnt_vec, low_pnt_vec):
    r"""
    Set the upper and lower points for an airfoil on a BOR. The BOR XSecCurve must be of type XS_FILE_AIRFOIL.


    .. code-block:: python

        # Add Body of Recolution
        bor_id = AddGeom( "BODYOFREVOLUTION", "" )

        ChangeBORXSecShape( bor_id, XS_FILE_AIRFOIL )

        ReadBORFileAirfoil( bor_id, "airfoil/N0012_VSP.af" )

        up_array = GetBORAirfoilUpperPnts( bor_id )

        low_array = GetBORAirfoilLowerPnts( bor_id )

        for i in range(int( len(up_array) )):

            up_array[i].scale_y( 2.0 )

            low_array[i].scale_y( 0.5 )

        SetBORAirfoilPnts( bor_id, up_array, low_array )


    :param [in]: bor_id string Body of revolution Geom ID
    :param [in]: up_pnt_vec vector<vec3d> Vector of points defining the upper surface of the airfoil
    :param [in]: low_pnt_vec vector<_>vec3d> Vector of points defining the lower surface of the airfoil
    """
    return _vsp_g.SetBORAirfoilPnts(bor_id, up_pnt_vec, low_pnt_vec)

def GetBORAirfoilUpperPnts(bor_id):
    r"""
    Get the coordinate points for the upper surface of an airfoil on a BOR. The BOR XSecCurve must be of type XS_FILE_AIRFOIL


    .. code-block:: python

        # Add Body of Recolution
        bor_id = AddGeom( "BODYOFREVOLUTION", "" )

        ChangeBORXSecShape( bor_id, XS_FILE_AIRFOIL )

        ReadBORFileAirfoil( bor_id, "airfoil/N0012_VSP.af" )

        up_array = GetBORAirfoilUpperPnts( bor_id )


    See also: SetAirfoilPnts
    :param [in]: bor_id string Body of revolution Geom ID
    :rtype: std::vector< vec3d,std::allocator< vec3d > >
    :return: vector<vec3d> Vector of coordinate points for the upper airfoil surface
    """
    return _vsp_g.GetBORAirfoilUpperPnts(bor_id)

def GetBORAirfoilLowerPnts(bor_id):
    r"""
    Get the coordinate points for the lower surface of an airfoil of a BOR. The XSecCurve must be of type XS_FILE_AIRFOIL


    .. code-block:: python

        # Add Body of Recolution
        bor_id = AddGeom( "BODYOFREVOLUTION", "" )

        ChangeBORXSecShape( bor_id, XS_FILE_AIRFOIL )

        ReadBORFileAirfoil( bor_id, "airfoil/N0012_VSP.af" )

        low_array = GetBORAirfoilLowerPnts( bor_id )


    See also: SetAirfoilPnts
    :param [in]: bor_id string Body of revolution Geom ID
    :rtype: std::vector< vec3d,std::allocator< vec3d > >
    :return: vector<vec3d> Vector of coordinate points for the lower airfoil surface
    """
    return _vsp_g.GetBORAirfoilLowerPnts(bor_id)

def GetBORUpperCSTCoefs(bor_id):
    r"""
    Get the CST coefficients for the upper surface of an airfoil of a BOR. The XSecCurve must be of type XS_CST_AIRFOIL
    See also: SetUpperCST
    :param [in]: bor_id string Body of revolution Geom ID
    :rtype: std::vector< double,std::allocator< double > >
    :return: vector<double> Vector of CST coefficients for the upper airfoil surface
    """
    return _vsp_g.GetBORUpperCSTCoefs(bor_id)

def GetBORLowerCSTCoefs(bor_id):
    r"""
    Get the CST coefficients for the lower surface of an airfoil of a BOR. The XSecCurve must be of type XS_CST_AIRFOIL
    See also: SetLowerCST
    :param [in]: bor_id string Body of revolution Geom ID
    :rtype: std::vector< double,std::allocator< double > >
    :return: vector<double> Vector of CST coefficients for the lower airfoil surface
    """
    return _vsp_g.GetBORLowerCSTCoefs(bor_id)

def GetBORUpperCSTDegree(bor_id):
    r"""
    Get the CST degree for the upper surface of an airfoil of a BOR. The XSecCurve must be of type XS_CST_AIRFOIL
    See also: SetUpperCST
    :param [in]: bor_id string Body of revolution Geom ID
    :rtype: int
    :return: int CST Degree for upper airfoil surface
    """
    return _vsp_g.GetBORUpperCSTDegree(bor_id)

def GetBORLowerCSTDegree(bor_id):
    r"""
    Get the CST degree for the lower surface of an airfoil of a BOR. The XSecCurve must be of type XS_CST_AIRFOIL
    See also: SetLowerCST
    :param [in]: bor_id string Body of revolution Geom ID
    :rtype: int
    :return: int CST Degree for lower airfoil surface
    """
    return _vsp_g.GetBORLowerCSTDegree(bor_id)

def SetBORUpperCST(bor_id, deg, coefs):
    r"""
    Set the CST degree and coefficients for the upper surface of an airfoil of a BOR. The number of coefficients should be one more than the CST degree. The XSecCurve must be of type XS_CST_AIRFOIL
    See also: GetUpperCSTDegree, GetUpperCSTCoefs
    :param [in]: bor_id string Body of revolution Geom ID
    :param [in]: deg int CST degree of upper airfoil surface
    :param [in]: coefs vector<double> Array of CST coefficients for the upper airfoil surface
    """
    return _vsp_g.SetBORUpperCST(bor_id, deg, coefs)

def SetBORLowerCST(bor_id, deg, coefs):
    r"""
    Set the CST degree and coefficients for the lower surface of an airfoil of a BOR. The number of coefficients should be one more than the CST degree. The XSecCurve must be of type XS_CST_AIRFOIL
    See also: GetLowerCSTDegree, GetLowerCSTCoefs
    :param [in]: bor_id string Body of revolution Geom ID
    :param [in]: deg int CST degree of lower airfoil surface
    :param [in]: coefs vector<double> Vector of CST coefficients for the lower airfoil surface
    """
    return _vsp_g.SetBORLowerCST(bor_id, deg, coefs)

def PromoteBORCSTUpper(bor_id):
    r"""
    Promote the CST for the upper airfoil surface of a BOR. The XSecCurve must be of type XS_CST_AIRFOIL
    See also: GetUpperCSTDegree
    :param [in]: bor_id string Body of revolution Geom ID
    """
    return _vsp_g.PromoteBORCSTUpper(bor_id)

def PromoteBORCSTLower(bor_id):
    r"""
    Promote the CST for the lower airfoil surface of a BOR. The XSecCurve must be of type XS_CST_AIRFOIL
    See also: GetLowerCSTDegree
    :param [in]: bor_id string Body of revolution Geom ID
    """
    return _vsp_g.PromoteBORCSTLower(bor_id)

def DemoteBORCSTUpper(bor_id):
    r"""
    Demote the CST for the upper airfoil surface of a BOR. The XSecCurve must be of type XS_CST_AIRFOIL
    See also: GetUpperCSTDegree
    :param [in]: bor_id string Body of revolution Geom ID
    """
    return _vsp_g.DemoteBORCSTUpper(bor_id)

def DemoteBORCSTLower(bor_id):
    r"""
    Demote the CST for the lower airfoil surface of a BOR. The XSecCurve must be of type XS_CST_AIRFOIL
    See also: GetLowerCSTDegree
    :param [in]: bor_id string Body of revolution Geom ID
    """
    return _vsp_g.DemoteBORCSTLower(bor_id)

def FitBORAfCST(bor_id, deg):
    r"""
    Fit a CST airfoil for an existing airfoil of a BOR of type XS_FOUR_SERIES, XS_SIX_SERIES, XS_FOUR_DIGIT_MOD, XS_FIVE_DIGIT, XS_FIVE_DIGIT_MOD, XS_ONE_SIX_SERIES, or XS_FILE_AIRFOIL.
    :param [in]: bor_id string Body of revolution Geom ID
    :param [in]: deg int CST degree
    """
    return _vsp_g.FitBORAfCST(bor_id, deg)

def WriteBezierAirfoil(file_name, geom_id, foilsurf_u):
    r"""
    Write out the untwisted unit-length 2D Bezier curve for the specified airfoil in custom\*.bz format. The output will describe the analytical shape of the airfoil. See BezierAirfoilExample.m and BezierCtrlToCoordPnts.m for examples of
    discretizing the Bezier curve and generating a Selig airfoil file.


    .. code-block:: python

        #==== Add Wing Geometry and Set Parms ====//
        wing_id = AddGeom( "WING", "" )

        u = 0.5 # export airfoil at mid span location

        #==== Write Bezier Airfoil File ====//
        WriteBezierAirfoil( "Example_Bezier.bz", wing_id, u )


    :param [in]: file_name string Airfoil (\*.bz) output file name
    :param [in]: geom_id string Geom ID
    :param [in]: foilsurf_u double U location (range: 0 - 1) along the surface. The foil surface does not include root and tip caps (i.e. 2 section wing -> XSec0 @ u=0, XSec1 @ u=0.5, XSec2 @ u=1.0)
    """
    return _vsp_g.WriteBezierAirfoil(file_name, geom_id, foilsurf_u)

def WriteSeligAirfoil(file_name, geom_id, foilsurf_u):
    r"""
    Write out the untwisted unit-length 2D coordinate points for the specified airfoil in Selig format. Coordinate points follow the on-screen wire frame W tessellation.


    .. code-block:: python

        #==== Add Wing Geometry and Set Parms ====//
        wing_id = AddGeom( "WING", "" )

        u = 0.5 # export airfoil at mid span location

        #==== Write Selig Airfoil File ====//
        WriteSeligAirfoil( "Example_Selig.dat", wing_id, u )


    See also: GetAirfoilCoordinates
    :param [in]: file_name string Airfoil (\*.dat) output file name
    :param [in]: geom_id string Geom ID
    :param [in]: foilsurf_u double U location (range: 0 - 1) along the surface. The foil surface does not include root and tip caps (i.e. 2 section wing -> XSec0 @ u=0, XSec1 @ u=0.5, XSec2 @ u=1.0)
    """
    return _vsp_g.WriteSeligAirfoil(file_name, geom_id, foilsurf_u)

def GetAirfoilCoordinates(geom_id, foilsurf_u):
    r"""
    Get the untwisted unit-length 2D coordinate points for the specified airfoil
    See also: WriteSeligAirfoil
    :param [in]: geom_id string Geom ID
    :param [in]: foilsurf_u double U location (range: 0 - 1) along the surface. The foil surface does not include root and tip caps (i.e. 2 section wing -> XSec0 @ u=0, XSec1 @ u=0.5, XSec2 @ u=1.0)
    """
    return _vsp_g.GetAirfoilCoordinates(geom_id, foilsurf_u)

def EditXSecInitShape(xsec_id):
    r"""
    Initialize the EditCurveXSec to the current value of m_ShapeType (i.e. EDIT_XSEC_ELLIPSE)


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        ChangeXSecShape( xsec_surf, 2, XS_EDIT_CURVE )

        # Identify XSec 2
        xsec_2 = GetXSec( xsec_surf, 2 )

        # Set XSec 2 to linear
        EditXSecConvertTo( xsec_2, LINEAR )

        EditXSecInitShape( xsec_2 ) # Change back to default ellipse


    See also: INIT_EDIT_XSEC_TYPE
    :param [in]: xsec_id string XSec ID
    """
    return _vsp_g.EditXSecInitShape(xsec_id)

def EditXSecConvertTo(xsec_id, newtype):
    r"""
    Convert the EditCurveXSec curve type to the specified new type. Note, EditCurveXSec uses the same enumerations for PCurve to identify curve type,
    but APPROX_CEDIT is not supported at this time.


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        ChangeXSecShape( xsec_surf, 1, XS_EDIT_CURVE )

        # Identify XSec 1
        xsec_1 = GetXSec( xsec_surf, 1 )

        # Set XSec 1 to Linear
        EditXSecConvertTo( xsec_1, LINEAR )


    See also: PCURV_TYPE
    :param [in]: xsec_id string XSec ID
    :param [in]: newtype int New curve type enum (i.e. CEDIT)
    """
    return _vsp_g.EditXSecConvertTo(xsec_id, newtype)

def GetEditXSecUVec(xsec_id):
    r"""
    Get the U parameter vector for an EditCurveXSec. The vector will be in increasing order with a range of 0 - 1.


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        ChangeXSecShape( xsec_surf, 2, XS_EDIT_CURVE )

        # Identify XSec 2
        xsec_2 = GetXSec( xsec_surf, 2 )

        # Set XSec 2 to linear
        EditXSecConvertTo( xsec_2, LINEAR )

        u_vec = GetEditXSecUVec( xsec_2 )

        if  u_vec[1] - 0.25 > 1e-6 :
            print( "Error: GetEditXSecUVec" )


    :param [in]: xsec_id string XSec ID
    :rtype: std::vector< double,std::allocator< double > >
    :return: vector <double> Array of U parameter values
    """
    return _vsp_g.GetEditXSecUVec(xsec_id)

def GetEditXSecCtrlVec(xsec_id, non_dimensional=True):
    r"""
    Get the control point vector for an EditCurveXSec. Note, the returned array of vec3d values will be represented in 2D with Z set to 0.


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        ChangeXSecShape( xsec_surf, 1, XS_EDIT_CURVE )

        # Identify XSec 1
        xsec_1 = GetXSec( xsec_surf, 1 )

        # Get the control points for the default shape
        xsec1_pts = GetEditXSecCtrlVec( xsec_1, True ) # The returned control points will not be scaled by width and height

        print( f"Normalized Bottom Point of XSecCurve: {xsec1_pts[3].x()}, {xsec1_pts[3].y()}, {xsec1_pts[3].z()}" )


    :param [in]: xsec_id string XSec ID
    :param [in]: non_dimensional bool True to get the points non-dimensionalized, False to get them scaled by m_Width and m_Height
    :rtype: std::vector< vec3d,std::allocator< vec3d > >
    :return: vector <vec3d> Array of control points
    """
    return _vsp_g.GetEditXSecCtrlVec(xsec_id, non_dimensional)

def SetEditXSecPnts(xsec_id, u_vec, control_pts, r_vec):
    r"""
    Set the U parameter vector and the control point vector for an EditCurveXSec. The arrays must be of equal length, with the values for U defined in
    increasing order and range 0 - 1. The input control points to SetEditXSecPnts must be nondimensionalized in the approximate range of [-0.5, 0.5].


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        ChangeXSecShape( xsec_surf, 2, XS_EDIT_CURVE )

        # Identify XSec 2
        xsec_2 = GetXSec( xsec_surf, 2 )

        # Set XSec 2 to linear
        EditXSecConvertTo( xsec_2, LINEAR )

        # Turn off R/L symmetry
        SetParmVal( GetXSecParm( xsec_2, "SymType"), SYM_NONE )

        # Define a square
        xsec2_pts = [vec3d(0.5, 0.5, 0.0),
                 vec3d(0.5, -0.5, 0.0),
                 vec3d(-0.5, -0.5, 0.0),
                 vec3d(-0.5, 0.5, 0.0),
                 vec3d(0.5, 0.5, 0.0)]

        # u vec must start at 0.0 and end at 1.0
        u_vec = [0.0, 0.25, 0.5, 0.75, 1.0]

        r_vec = [0.0, 0.0, 0.0, 0.0, 0.0]

        SetEditXSecPnts( xsec_2, u_vec, xsec2_pts, r_vec ) # Note: points are unscaled by the width and height parms

        new_pnts = GetEditXSecCtrlVec( xsec_2, True ) # The returned control points will not be scaled by width and height

        if  dist( new_pnts[3], xsec2_pts[3] ) > 1e-6 :
            print( "Error: SetEditXSecPnts")


    :param [in]: xsec_id string XSec ID
    :param [in]: u_vec vector <double> Array of U parameter values
    :param [in]: r_vec vector <double> Array of R parameter values
    :param [in]: control_pts vector <vec3d> Nondimensionalized array of control points
    """
    return _vsp_g.SetEditXSecPnts(xsec_id, u_vec, control_pts, r_vec)

def EditXSecDelPnt(xsec_id, indx):
    r"""
    Delete an EditCurveXSec control point. Note, cubic Bezier intermediate control points (those not on the curve) cannot be deleted.
    The previous and next Bezier control point will be deleted along with the point on the curve. Regardless of curve type, the first
    and last points may not be deleted.


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        ChangeXSecShape( xsec_surf, 2, XS_EDIT_CURVE )

        # Identify XSec 2
        xsec_2 = GetXSec( xsec_surf, 2 )

        # Turn off R/L symmetry
        SetParmVal( GetXSecParm( xsec_2, "SymType"), SYM_NONE )

        old_pnts = GetEditXSecCtrlVec( xsec_2, True ) # The returned control points will not be scaled by width and height

        EditXSecDelPnt( xsec_2, 3 ) # Remove control point at bottom of circle

        new_pnts = GetEditXSecCtrlVec( xsec_2, True ) # The returned control points will not be scaled by width and height

        if  len(old_pnts) - len(new_pnts) != 3  :
            print( "Error: EditXSecDelPnt")


    :param [in]: xsec_id string XSec ID
    :param [in]: indx int Control point index
    """
    return _vsp_g.EditXSecDelPnt(xsec_id, indx)

def EditXSecSplit01(xsec_id, u):
    r"""
    Split the EditCurveXSec at the specified U value


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        ChangeXSecShape( xsec_surf, 2, XS_EDIT_CURVE )

        # Identify XSec 2
        xsec_2 = GetXSec( xsec_surf, 2 )

        # Turn off R/L symmetry
        SetParmVal( GetXSecParm( xsec_2, "SymType"), SYM_NONE )

        old_pnts = GetEditXSecCtrlVec( xsec_2, True ) # The returned control points will not be scaled by width and height

        new_pnt_ind = EditXSecSplit01( xsec_2, 0.375 )

        new_pnts = GetEditXSecCtrlVec( xsec_2, True ) # The returned control points will not be scaled by width and height

        if  len(new_pnts) - len(old_pnts) != 3  :
            print( "Error: EditXSecSplit01")


    :param [in]: xsec_id string XSec ID
    :param [in]: u double U value to split the curve at (0 - 1)
    :rtype: int
    :return: int Index of the point added from the split
    """
    return _vsp_g.EditXSecSplit01(xsec_id, u)

def MoveEditXSecPnt(xsec_id, indx, new_pnt):
    r"""
    Move an EditCurveXSec control point. The XSec points are nondimensionalized by m_Width and m_Height and
    defined in 2D, so the Z value of the new coordinate point will be ignored.


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        ChangeXSecShape( xsec_surf, 1, XS_EDIT_CURVE )

        # Identify XSec 1
        xsec_1 = GetXSec( xsec_surf, 1 )

        # Turn off R/L symmetry
        SetParmVal( GetXSecParm( xsec_1, "SymType"), SYM_NONE )

        # Get the control points for the default shape
        xsec1_pts = GetEditXSecCtrlVec( xsec_1, True ) # The returned control points will not be scaled by width and height

        # Identify a control point that lies on the curve and shift it in Y
        move_pnt_ind = 3

        new_pnt = vec3d( xsec1_pts[move_pnt_ind].x(), 2 * xsec1_pts[move_pnt_ind].y(), 0.0 )

        # Move the control point
        MoveEditXSecPnt( xsec_1, move_pnt_ind, new_pnt )

        new_pnts = GetEditXSecCtrlVec( xsec_1, True ) # The returned control points will not be scaled by width and height

        if  dist( new_pnt, new_pnts[move_pnt_ind] ) > 1e-6 :
            print( "Error: MoveEditXSecPnt" )


    :param [in]: xsec_id string XSec ID
    :param [in]: indx int Control point index
    :param [in]: new_pnt vec3d Coordinate of the new point
    """
    return _vsp_g.MoveEditXSecPnt(xsec_id, indx, new_pnt)

def ConvertXSecToEdit(geom_id, indx=0):
    r"""
    Convert any XSec type into an EditCurveXSec. This function will work for BOR Geoms, in which case the input XSec index is ignored.


    .. code-block:: python

        # Add Stack
        sid = AddGeom( "STACK", "" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( sid, 0 )

        ChangeXSecShape( xsec_surf, 1, XS_ROUNDED_RECTANGLE )

        # Convert Rounded Rectangle to Edit Curve type XSec
        ConvertXSecToEdit( sid, 1 )

        # Identify XSec 1
        xsec_1 = GetXSec( xsec_surf, 1 )

        # Get the control points for the default shape
        xsec1_pts = GetEditXSecCtrlVec( xsec_1, True ) # The returned control points will not be scaled by width and height


    :param [in]: geom_id string Geom ID
    :param [in]: indx int XSec index
    """
    return _vsp_g.ConvertXSecToEdit(geom_id, indx)

def GetEditXSecFixedUVec(xsec_id):
    r"""
    Get the vector of fixed U flags for each control point in an EditCurveXSec. The fixed U flag is used to hold the
    U parameter of the control point constant when performing an equal arc length reparameterization of the curve.


    .. code-block:: python

        # Add Wing
        wid = AddGeom( "WING" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( wid, 0 )

        ChangeXSecShape( xsec_surf, 1, XS_EDIT_CURVE )

        # Identify XSec 1
        xsec_1 = GetXSec( xsec_surf, 1 )

        fixed_u_vec = list(GetEditXSecFixedUVec( xsec_1 ))

        fixed_u_vec[3] = True # change a flag

        SetEditXSecFixedUVec( xsec_1, fixed_u_vec )

        ReparameterizeEditXSec( xsec_1 )


    See also: SetEditXSecFixedUVec, ReparameterizeEditXSec
    :param [in]: xsec_id string XSec ID
    :rtype: std::vector< bool,std::allocator< bool > >
    :return: vector <bool> Array of bool values for each control point
    """
    return _vsp_g.GetEditXSecFixedUVec(xsec_id)

def SetEditXSecFixedUVec(xsec_id, fixed_u_vec):
    r"""
    Set the vector of fixed U flags for each control point in an EditCurveXSec. The fixed U flag is used to hold the
    U parameter of the control point constant when performing an equal arc length reparameterization of the curve.


    .. code-block:: python

        # Add Wing
        wid = AddGeom( "WING" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( wid, 0 )

        ChangeXSecShape( xsec_surf, 1, XS_EDIT_CURVE )

        # Identify XSec 1
        xsec_1 = GetXSec( xsec_surf, 1 )

        fixed_u_vec = list(GetEditXSecFixedUVec( xsec_1 ))

        fixed_u_vec[3] = True # change a flag

        SetEditXSecFixedUVec( xsec_1, fixed_u_vec )

        ReparameterizeEditXSec( xsec_1 )


    See also: GetEditXSecFixedUVec, ReparameterizeEditXSec
    :param [in]: xsec_id string XSec ID
    :param [in]: fixed_u_vec vector <bool> Array of fixed U flags
    """
    return _vsp_g.SetEditXSecFixedUVec(xsec_id, fixed_u_vec)

def ReparameterizeEditXSec(xsec_id):
    r"""
    Perform an equal arc length repareterization on an EditCurveXSec. The reparameterization is performed between
    specific U values if the Fixed U flag is true. This allows corners, such as at 0.25, 0.5, and 0.75 U, to be held
    constant while everything between them is reparameterized.


    .. code-block:: python

        # Add Wing
        wid = AddGeom( "WING" )

        # Get First (and Only) XSec Surf
        xsec_surf = GetXSecSurf( wid, 0 )

        ChangeXSecShape( xsec_surf, 1, XS_EDIT_CURVE )

        # Identify XSec 1
        xsec_1 = GetXSec( xsec_surf, 1 )

        fixed_u_vec = list(GetEditXSecFixedUVec( xsec_1 ))

        fixed_u_vec[3] = True # change a flag

        SetEditXSecFixedUVec( xsec_1, fixed_u_vec )

        ReparameterizeEditXSec( xsec_1 )


    See also: SetEditXSecFixedUVec, GetEditXSecFixedUVec
    :param [in]: xsec_id string XSec ID
    """
    return _vsp_g.ReparameterizeEditXSec(xsec_id)

def GetNumSets():
    r"""
    Get the total number of defined sets. Named sets are used to group components and read/write on them. The number of named
    sets will be 10 for OpenVSP versions up to 3.17.1 and 20 for later versions.


    .. code-block:: python

        if  GetNumSets() <= 0 : print( "---> Error: API GetNumSets " )


    :rtype: int
    :return: int Number of sets
    """
    return _vsp_g.GetNumSets()

def SetSetName(index, name):
    r"""
    Set the name of a set at specified index


    .. code-block:: python

        SetSetName( 3, "SetFromScript" )

        if GetSetName(3) != "SetFromScript":
            print("---> Error: API Get/Set Set Name")



    See also: SET_TYPE
    :param [in]: index int Set index
    :param [in]: name string Set name
    """
    return _vsp_g.SetSetName(index, name)

def GetSetName(index):
    r"""
    Get the name of a set at specified index


    .. code-block:: python

        SetSetName( 3, "SetFromScript" )

        if GetSetName(3) != "SetFromScript":
            print("---> Error: API Get/Set Set Name")


    See also: SET_TYPE
    :param [in]: index int Set index
    :rtype: string
    :return: string Set name
    """
    return _vsp_g.GetSetName(index)

def GetGeomSetAtIndex(index):
    r"""
    Get an array of Geom IDs for the specified set index


    .. code-block:: python

        SetSetName( 3, "SetFromScript" )

        geom_arr1 = GetGeomSetAtIndex( 3 )

        geom_arr2 = GetGeomSet( "SetFromScript" )

        if  len(geom_arr1) != len(geom_arr2) : print( "---> Error: API GetGeomSet " )


    See also: SET_TYPE
    :param [in]: index int Set index
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of Geom IDs
    """
    return _vsp_g.GetGeomSetAtIndex(index)

def GetGeomSet(name):
    r"""
    Get an array of Geom IDs for the specified set name


    .. code-block:: python

        SetSetName( 3, "SetFromScript" )

        geom_arr1 = GetGeomSetAtIndex( 3 )

        geom_arr2 = GetGeomSet( "SetFromScript" )

        if  len(geom_arr1) != len(geom_arr2) : print( "---> Error: API GetGeomSet " )


    :param [in]: name string const string set name
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: array<string> array of Geom IDs
    """
    return _vsp_g.GetGeomSet(name)

def GetSetIndex(name):
    r"""
    Get the set index for the specified set name


    .. code-block:: python

        SetSetName( 3, "SetFromScript" )

        if GetSetIndex("SetFromScript") != 3:
            print("ERROR: GetSetIndex")



    :param [in]: name string Set name
    :rtype: int
    :return: int Set index
    """
    return _vsp_g.GetSetIndex(name)

def GetSetFlag(geom_id, set_index):
    r"""
    Check if a Geom is in the set at the specified set index


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        SetSetFlag( fuseid, 3, True )

        if not GetSetFlag(fuseid, 3):
            print("---> Error: API Set/Get Set Flag")



    :param [in]: geom_id string Geom ID
    :param [in]: set_index int Set index
    :rtype: boolean
    :return: bool True if geom is in the set, false otherwise
    """
    return _vsp_g.GetSetFlag(geom_id, set_index)

def SetSetFlag(geom_id, set_index, flag):
    r"""
    Set whether or not a Geom is a member of the set at specified set index


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        SetSetFlag( fuseid, 3, True )

        if not GetSetFlag(fuseid, 3):
            print("---> Error: API Set/Get Set Flag")



    :param [in]: geom_id string Geom ID
    :param [in]: set_index int Set index
    :param [in]: flag bool Flag that indicates set membership
    """
    return _vsp_g.SetSetFlag(geom_id, set_index, flag)

def CopyPasteSet(copyIndex, pasteIndex):
    r"""
    Copies all the states of a geom set and pastes them into a specific set based on passed in indexs


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        #set fuseid's state for set 3 to true
        SetSetFlag( fuseid, 3, True )

        #Copy set 3 and Paste into set 4
        CopyPasteSet( 3, 4 )

        #get fuseid's state for set 4
        flag_value = GetSetFlag( fuseid, 4 )

        if  flag_value != True: print( "---> Error: API CopyPasteSet " )


    :param [in]: copyIndex int Copy Index
    :param [in]: pasteIndex int Paste Index
    """
    return _vsp_g.CopyPasteSet(copyIndex, pasteIndex)

def GetBBoxSet(set):
    r"""
    Get the corners of the bounding box of the specified Set.


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pid = AddGeom( "POD" )

        Update()

        sethasmembers, xmin, ymin, zmin, xlen, ylen, zlen = GetBBoxSet( SET_ALL )

    :param [in]: set int Desired Set
    :param [out]: xmin_out double Minimum bounding box X coordinate
    :param [out]: ymin_out double Minimum bounding box Y coordinate
    :param [out]: zmin_out double Minimum bounding box Z coordinate
    :param [out]: xlen_out double Maximum bounding box X length
    :param [out]: ylen_out double Maximum bounding box Y length
    :param [out]: zlen_out double Maximum bounding box Z length
    :rtype: boolean
    :return: bool Flag indicating whether the set has members (is non-empty)
    """
    return _vsp_g.GetBBoxSet(set)

def GetScaleIndependentBBoxSet(set):
    r"""
    Get the corners of the scale independent bounding box of the specified Set.


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pid = AddGeom( "POD" )

        Update()

        sethasmembers, xmin, ymin, zmin, xlen, ylen, zlen = GetScaleIndependentBBoxSet( SET_ALL );

    :param [in]: set int Desired Set
    :param [out]: xmin_out double Minimum bounding box X coordinate
    :param [out]: ymin_out double Minimum bounding box Y coordinate
    :param [out]: zmin_out double Minimum bounding box Z coordinate
    :param [out]: xlen_out double Maximum bounding box X length
    :param [out]: ylen_out double Maximum bounding box Y length
    :param [out]: zlen_out double Maximum bounding box Z length
    :rtype: boolean
    :return: bool Flag indicating whether the set has members (is non-empty)
    """
    return _vsp_g.GetScaleIndependentBBoxSet(set)

def ScaleSet(set_index, scale):
    r"""
    Apply a scale factor to a set


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE" )

        SetSetFlag( fuseid, 3, True )

        # Scale by a factor of 2
        ScaleSet( 3, 2.0 )


    :param [in]: set_index int Set index
    :param [in]: scale double Scale factor
    """
    return _vsp_g.ScaleSet(set_index, scale)

def RotateSet(set_index, x_rot_deg, y_rot_deg, z_rot_deg):
    r"""
    Rotate a set about the global X, Y, and Z axes


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE" )

        SetSetFlag( fuseid, 3, True )

        # Rotate 90 degrees about Y
        RotateSet( 3, 0, 90, 0 )


    :param [in]: set_index int Set index
    :param [in]: x_rot_deg double Rotation about the X axis (degrees)
    :param [in]: y_rot_deg double Rotation about the Y axis (degrees)
    :param [in]: z_rot_deg double Rotation about the Z axis (degrees)
    """
    return _vsp_g.RotateSet(set_index, x_rot_deg, y_rot_deg, z_rot_deg)

def TranslateSet(set_index, translation_vec):
    r"""
    Translate a set along a given vector


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE" )

        SetSetFlag( fuseid, 3, True )

        # Translate 2 units in X and 3 units in Y
        TranslateSet( 3, vec3d( 2, 3, 0 ) )


    :param [in]: set_index int Set index
    :param [in]: translation_vec vec3d Translation vector
    """
    return _vsp_g.TranslateSet(set_index, translation_vec)

def TransformSet(set_index, translation_vec, x_rot_deg, y_rot_deg, z_rot_deg, scale, scale_translations_flag):
    r"""
    Apply translation, rotation, and scale transformations to a set


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE" )

        SetSetFlag( fuseid, 3, True )

        # Translate 2 units in X and 3 units in Y, rotate 90 degrees about Y, and scale by a factor of 2
        TransformSet( 3, vec3d( 2, 3, 0 ), 0, 90, 0, 2.0, True )


    See also: TranslateSet, RotateSet, ScaleSet
    :param [in]: set_index int Set index
    :param [in]: translation_vec vec3d Translation vector
    :param [in]: x_rot_deg double Rotation about the X axis (degrees)
    :param [in]: y_rot_deg double Rotation about the Y axis (degrees)
    :param [in]: z_rot_deg double Rotation about the Z axis (degrees)
    :param [in]: scale double Scale factor
    :param [in]: scale_translations_flag bool Flag to apply the scale factor to translations
    """
    return _vsp_g.TransformSet(set_index, translation_vec, x_rot_deg, y_rot_deg, z_rot_deg, scale, scale_translations_flag)

def ValidParm(id):
    r"""
    Check if given Parm is valid


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pid = AddGeom( "POD" )

        lenid = GetParm( pid, "Length", "Design" )

        if  not ValidParm( lenid ) : print( "---> Error: API GetParm  " )


    :param [in]: id string Parm ID
    :rtype: boolean
    :return: bool True if Parm ID is valid, false otherwise
    """
    return _vsp_g.ValidParm(id)

def SetParmVal(*args):
    r"""
    *Overload 1:*



    Set the value of the specified Parm.


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        xsec_surf = GetXSecSurf( fuseid, 0 )

        ChangeXSecShape( xsec_surf, GetNumXSec( xsec_surf ) - 1, XS_ROUNDED_RECTANGLE )

        xsec = GetXSec( xsec_surf, GetNumXSec( xsec_surf ) - 1 )

        wid = GetXSecParm( xsec, "RoundedRect_Width" )

        SetParmVal( wid, 23.0 )

        if  abs( GetParmVal( wid ) - 23 ) > 1e-6 : print( "---> Error: API Parm Val Set/Get " )


    See also: SetParmValUpdate
    :param [in]: parm_id string Parm ID
    :param [in]: val double Parm value to set
    :rtype: float
    :return: double Value that the Parm was set to


    |

    *Overload 2:*



    Set the value of the specified Parm.


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        xsec_surf = GetXSecSurf( fuseid, 0 )

        ChangeXSecShape( xsec_surf, GetNumXSec( xsec_surf ) - 1, XS_ROUNDED_RECTANGLE )

        xsec = GetXSec( xsec_surf, GetNumXSec( xsec_surf ) - 1 )

        wid = GetXSecParm( xsec, "RoundedRect_Width" )

        SetParmVal( wid, 23.0 )

        if  abs( GetParmVal( wid ) - 23 ) > 1e-6 : print( "---> Error: API Parm Val Set/Get " )


    See also: SetParmValUpdate
    :param [in]: geom_id string Geom ID
    :param [in]: name string Parm name
    :param [in]: group string Parm group name
    :param [in]: val double Parm value to set
    :rtype: float
    :return: double Value that the Parm was set to
    """
    return _vsp_g.SetParmVal(*args)

def SetParmValLimits(parm_id, val, lower_limit, upper_limit):
    r"""
    Set the value along with the upper and lower limits of the specified Parm


    .. code-block:: python

        pod_id = AddGeom( "POD" )

        length = FindParm( pod_id, "Length", "Design" )

        SetParmValLimits( length, 10.0, 0.001, 1.0e12 )

        SetParmDescript( length, "Total Length of Geom" )


    See also: SetParmLowerLimit, SetParmUpperLimit
    :param [in]: parm_id string Parm ID
    :param [in]: val double Parm value to set
    :param [in]: lower_limit double Parm lower limit
    :param [in]: upper_limit double Parm upper limit
    :rtype: float
    :return: double Value that the Parm was set to
    """
    return _vsp_g.SetParmValLimits(parm_id, val, lower_limit, upper_limit)

def SetParmValUpdate(*args):
    r"""
    *Overload 1:*



    Set the value of the specified Parm and force an Update.


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        parm_id = GetParm( pod_id, "X_Rel_Location", "XForm" )

        SetParmValUpdate( parm_id, 5.0 )


    See also: SetParmVal
    :param [in]: parm_id string Parm ID
    :param [in]: val double Parm value to set
    :rtype: float
    :return: double Value that the Parm was set to


    |

    *Overload 2:*



    Set the value of the specified Parm and force an Update.


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        parm_id = GetParm( pod_id, "X_Rel_Location", "XForm" )

        SetParmValUpdate( parm_id, 5.0 )


    See also: SetParmVal
    :param [in]: geom_id string Geom ID
    :param [in]: parm_name string Parm name
    :param [in]: parm_group_name string Parm group name
    :param [in]: val double Parm value to set
    :rtype: float
    :return: double Value that the Parm was set to
    """
    return _vsp_g.SetParmValUpdate(*args)

def GetParmVal(*args):
    r"""
    *Overload 1:*



    Get the value of the specified Parm. The data type of the Parm value will be cast to a double


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        xsec_surf = GetXSecSurf( fuseid, 0 )

        ChangeXSecShape( xsec_surf, GetNumXSec( xsec_surf ) - 1, XS_ROUNDED_RECTANGLE )

        xsec = GetXSec( xsec_surf, GetNumXSec( xsec_surf ) - 1 )

        wid = GetXSecParm( xsec, "RoundedRect_Width" )

        SetParmVal( wid, 23.0 )

        if  abs( GetParmVal( wid ) - 23 ) > 1e-6 : print( "---> Error: API Parm Val Set/Get " )


    :param [in]: parm_id string Parm ID
    :rtype: float
    :return: double Parm value


    |

    *Overload 2:*



    Get the value of the specified Parm. The data type of the Parm value will be cast to a double


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        xsec_surf = GetXSecSurf( fuseid, 0 )

        ChangeXSecShape( xsec_surf, GetNumXSec( xsec_surf ) - 1, XS_ROUNDED_RECTANGLE )

        xsec = GetXSec( xsec_surf, GetNumXSec( xsec_surf ) - 1 )

        wid = GetXSecParm( xsec, "RoundedRect_Width" )

        SetParmVal( wid, 23.0 )

        if  abs( GetParmVal( wid ) - 23 ) > 1e-6 : print( "---> Error: API Parm Val Set/Get " )


    :param [in]: geom_id string Geom ID
    :param [in]: name string Parm name
    :param [in]: group string Parm group name
    :rtype: float
    :return: double Parm value
    """
    return _vsp_g.GetParmVal(*args)

def GetIntParmVal(parm_id):
    r"""
    Get the value of the specified int type Parm


    .. code-block:: python

        #==== Add Prop Geometry ====//
        prop_id = AddGeom( "PROP" )

        num_blade_id = GetParm( prop_id, "NumBlade", "Design" )

        num_blade = GetIntParmVal( num_blade_id )


    :param [in]: parm_id string Parm ID
    :rtype: int
    :return: double Parm value
    """
    return _vsp_g.GetIntParmVal(parm_id)

def GetBoolParmVal(parm_id):
    r"""
    Get the value of the specified bool type Parm


    .. code-block:: python

        #==== Add Prop Geometry ====//
        prop_id = AddGeom( "PROP" )

        rev_flag_id = GetParm( prop_id, "ReverseFlag", "Design" )

        reverse_flag = GetBoolParmVal( rev_flag_id )


    :param [in]: parm_id string Parm ID
    :rtype: boolean
    :return: bool Parm value
    """
    return _vsp_g.GetBoolParmVal(parm_id)

def SetParmUpperLimit(parm_id, val):
    r"""
    Set the upper limit value for the specified Parm


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        xsec_surf = GetXSecSurf( fuseid, 0 )

        ChangeXSecShape( xsec_surf, GetNumXSec( xsec_surf ) - 1, XS_ROUNDED_RECTANGLE )

        xsec = GetXSec( xsec_surf, GetNumXSec( xsec_surf ) - 1 )

        wid = GetXSecParm( xsec, "RoundedRect_Width" )

        SetParmVal( wid, 23.0 )

        SetParmUpperLimit( wid, 13.0 )

        if  abs( GetParmVal( wid ) - 13 ) > 1e-6 : print( "---> Error: API SetParmUpperLimit " )


    See also: SetParmValLimits
    :param [in]: parm_id string Parm ID
    :param [in]: val double Parm upper limit
    """
    return _vsp_g.SetParmUpperLimit(parm_id, val)

def GetParmUpperLimit(parm_id):
    r"""
    Get the upper limit value for the specified Parm


    .. code-block:: python

        #==== Add Prop Geometry ====//
        prop_id = AddGeom( "PROP" )

        num_blade_id = GetParm( prop_id, "NumBlade", "Design" )

        max_blade = GetParmUpperLimit( num_blade_id )


    :param [in]: parm_id string Parm ID
    :rtype: float
    :return: double Parm upper limit
    """
    return _vsp_g.GetParmUpperLimit(parm_id)

def SetParmLowerLimit(parm_id, val):
    r"""
    Set the lower limit value for the specified Parm


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        xsec_surf = GetXSecSurf( fuseid, 0 )

        ChangeXSecShape( xsec_surf, GetNumXSec( xsec_surf ) - 1, XS_ROUNDED_RECTANGLE )

        xsec = GetXSec( xsec_surf, GetNumXSec( xsec_surf ) - 1 )

        wid = GetXSecParm( xsec, "RoundedRect_Width" )

        SetParmVal( wid, 13.0 )

        SetParmLowerLimit( wid, 15.0 )

        if  abs( GetParmVal( wid ) - 15 ) > 1e-6 : print( "---> Error: API SetParmLowerLimit " )


    See also: SetParmValLimits
    :param [in]: parm_id string Parm ID
    :param [in]: val double Parm lower limit
    """
    return _vsp_g.SetParmLowerLimit(parm_id, val)

def GetParmLowerLimit(parm_id):
    r"""
    Get the lower limit value for the specified Parm


    .. code-block:: python

        #==== Add Prop Geometry ====//
        prop_id = AddGeom( "PROP" )

        num_blade_id = GetParm( prop_id, "NumBlade", "Design" )

        min_blade = GetParmLowerLimit( num_blade_id )


    :param [in]: parm_id string Parm ID
    :rtype: float
    :return: double Parm lower limit
    """
    return _vsp_g.GetParmLowerLimit(parm_id)

def GetParmType(parm_id):
    r"""
    Get the data type for the specified Parm


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        xsec_surf = GetXSecSurf( fuseid, 0 )

        ChangeXSecShape( xsec_surf, GetNumXSec( xsec_surf ) - 1, XS_ROUNDED_RECTANGLE )

        xsec = GetXSec( xsec_surf, GetNumXSec( xsec_surf ) - 1 )

        wid = GetXSecParm( xsec, "RoundedRect_Width" )

        if  GetParmType( wid ) != PARM_DOUBLE_TYPE : print( "---> Error: API GetParmType " )


    See also: PARM_TYPE
    :param [in]: parm_id string Parm ID
    :rtype: int
    :return: int Parm data type enum (i.e. PARM_BOOL_TYPE)
    """
    return _vsp_g.GetParmType(parm_id)

def GetParmName(parm_id):
    r"""
    Get the name for the specified Parm


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        #==== Get Structure Name and Parm Container ID ====//
        parm_container_name = GetFeaStructName( pod_id, struct_ind )

        parm_container_id = FindContainer( parm_container_name, struct_ind )

        #==== Get and List All Parms in the Container ====//
        parm_ids = FindContainerParmIDs( parm_container_id )

        for i in range(len(parm_ids)):

            name_id = GetParmName( parm_ids[i] ) + ": " + parm_ids[i] + "\n"

            print( name_id )


    :param [in]: parm_id string Parm ID
    :rtype: string
    :return: string Parm name
    """
    return _vsp_g.GetParmName(parm_id)

def GetParmGroupName(parm_id):
    r"""
    Get the group name for the specified Parm


    .. code-block:: python

        veh_id = FindContainer( "Vehicle", 0 )

        #==== Get and List All Parms in the Container ====//
        parm_ids = FindContainerParmIDs( veh_id )

        print( "Parm Groups and IDs in Vehicle Parm Container: " )

        for i in range(len(parm_ids)):

            group_str = GetParmGroupName( parm_ids[i] ) + ": " + parm_ids[i] + "\n"

            print( group_str )


    :param [in]: parm_id string Parm ID
    :rtype: string
    :return: string Parm group name
    """
    return _vsp_g.GetParmGroupName(parm_id)

def GetParmDisplayGroupName(parm_id):
    r"""
    Get the display group name for the specified Parm


    .. code-block:: python

        veh_id = FindContainer( "Vehicle", 0 )

        #==== Get and List All Parms in the Container ====//
        parm_ids = FindContainerParmIDs( veh_id )

        print( "Parm Group Display Names and IDs in Vehicle Parm Container: " )

        for i in range(len(parm_ids)):

            group_str = GetParmDisplayGroupName( parm_ids[i] ) + ": " + parm_ids[i] + "\n"

            print( group_str )


    :param [in]: parm_id string Parm ID
    :rtype: string
    :return: string Parm display group name
    """
    return _vsp_g.GetParmDisplayGroupName(parm_id)

def GetParmContainer(parm_id):
    r"""
    Get Parm Container ID for the specified Parm


    .. code-block:: python

        # Add Fuselage Geom
        fuseid = AddGeom( "FUSELAGE", "" )

        xsec_surf = GetXSecSurf( fuseid, 0 )

        ChangeXSecShape( xsec_surf, GetNumXSec( xsec_surf ) - 1, XS_ROUNDED_RECTANGLE )

        xsec = GetXSec( xsec_surf, GetNumXSec( xsec_surf ) - 1 )

        wid = GetXSecParm( xsec, "RoundedRect_Width" )

        cid = GetParmContainer( wid )

        if  len(cid) == 0 : print( "---> Error: API GetParmContainer " )


    :param [in]: parm_id string Parm ID
    :rtype: string
    :return: string Parm Container ID
    """
    return _vsp_g.GetParmContainer(parm_id)

def SetParmDescript(parm_id, desc):
    r"""
    Set the description of the specified Parm


    .. code-block:: python

        pod_id = AddGeom( "POD" )

        length = FindParm( pod_id, "Length", "Design" )

        SetParmValLimits( length, 10.0, 0.001, 1.0e12 )

        SetParmDescript( length, "Total Length of Geom" )


    :param [in]: parm_id string Parm ID
    :param [in]: desc string Parm description
    """
    return _vsp_g.SetParmDescript(parm_id, desc)

def GetParmDescript(parm_id):
    r"""
    Get the description of the specified Parm


    .. code-block:: python

        pod_id = AddGeom( "POD" )

        length = FindParm( pod_id, "Length", "Design" )

        SetParmValLimits( length, 10.0, 0.001, 1.0e12 )

        desc = GetParmDescript( length )
        print( desc )


    :param [in]: parm_id string Parm ID
    :rtype: string
    :return: string desc Parm description
    """
    return _vsp_g.GetParmDescript(parm_id)

def FindParm(parm_container_id, parm_name, group_name):
    r"""
    Find a Parm ID given the Parm Container ID, Parm name, and Parm group


    .. code-block:: python

        #==== Add Wing Geometry ====//
        wing_id = AddGeom( "WING" )

        #==== Turn Symmetry OFF ====//
        sym_id = FindParm( wing_id, "Sym_Planar_Flag", "Sym")

        SetParmVal( sym_id, 0.0 ) # Note: bool input not supported in SetParmVal


    :param [in]: parm_container_id string Parm Container ID
    :param [in]: parm_name string Parm name
    :param [in]: group_name string Parm group name
    :rtype: string
    :return: string Parm ID
    """
    return _vsp_g.FindParm(parm_container_id, parm_name, group_name)

def FindContainers():
    r"""
    Get an array of all Parm Container IDs


    .. code-block:: python

        ctr_arr = FindContainers()

        print( "---> API Parm Container IDs: " )

        for i in range(int( len(ctr_arr) )):

            message = "\t" + ctr_arr[i] + "\n"

            print( message )


    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of Parm Container IDs
    """
    return _vsp_g.FindContainers()

def FindContainersWithName(name):
    r"""
    Get an array of Parm Container IDs for Containers with the specified name


    .. code-block:: python

        ctr_arr = FindContainersWithName( "UserParms" )

        if  len(ctr_arr) > 0 : print( ( "UserParms Parm Container ID: " + ctr_arr[0] ) )


    :param [in]: name string Parm Container name
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of Parm Container IDs
    """
    return _vsp_g.FindContainersWithName(name)

def FindContainer(name, index):
    r"""
    Get the ID of a Parm Container with specified name at input index


    .. code-block:: python

        #===== Get Vehicle Parm Container ID ====//
        veh_id = FindContainer( "Vehicle", 0 )


    See also: FindContainersWithName
    :param [in]: name string Parm Container name
    :param [in]: index int Parm Container index
    :rtype: string
    :return: string Parm Container ID
    """
    return _vsp_g.FindContainer(name, index)

def GetContainerName(parm_container_id):
    r"""
    Get the name of the specified Parm Container


    .. code-block:: python

        veh_id = FindContainer( "Vehicle", 0 )

        if  GetContainerName( veh_id) != "Vehicle":       print( "---> Error: API GetContainerName" )


    :param [in]: parm_container_id string Parm Container ID
    :rtype: string
    :return: string Parm Container name
    """
    return _vsp_g.GetContainerName(parm_container_id)

def FindContainerGroupNames(parm_container_id):
    r"""
    Get an array of Parm group names included in the specified Container


    .. code-block:: python

        user_ctr = FindContainer( "UserParms", 0 )

        grp_arr = FindContainerGroupNames( user_ctr )

        print( "---> UserParms Container Group IDs: " )
        for i in range(int( len(grp_arr) )):

            message = "\t" + grp_arr[i] + "\n"

            print( message )


    :param [in]: parm_container_id string Parm Container ID
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of Parm group names
    """
    return _vsp_g.FindContainerGroupNames(parm_container_id)

def FindContainerParmIDs(parm_container_id):
    r"""
    Get an array of Parm IDs included in the specified Container


    .. code-block:: python

        #==== Add Pod Geometry ====//
        pod_id = AddGeom( "POD" )

        #==== Add FeaStructure to Pod ====//
        struct_ind = AddFeaStruct( pod_id )

        #==== Get Structure Name and Parm Container ID ====//
        parm_container_name = GetFeaStructName( pod_id, struct_ind )

        parm_container_id = FindContainer( parm_container_name, struct_ind )

        #==== Get and List All Parms in the Container ====//
        parm_ids = FindContainerParmIDs( parm_container_id )

        for i in range(len(parm_ids)):

            name_id = GetParmName( parm_ids[i] ) + ": " + parm_ids[i] + "\n"

            print( name_id )


    :param [in]: parm_container_id string Parm Container ID
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of Parm IDs
    """
    return _vsp_g.FindContainerParmIDs(parm_container_id)

def GetVehicleID():
    r"""
    Get the ID of the Vehicle Parm Container


    .. code-block:: python

        #===== Get Vehicle Parm Container ID ====//
        veh_id = GetVehicleID()


    :rtype: string
    :return: string Vehicle ID
    """
    return _vsp_g.GetVehicleID()

def GetNumUserParms():
    r"""
    Get the number of user parameters


    .. code-block:: python

        n = GetNumUserParms()



    :rtype: int
    :return: int Number of user Parms
    """
    return _vsp_g.GetNumUserParms()

def GetNumPredefinedUserParms():
    r"""
    Get the number of pre-defined user parameters


    .. code-block:: python

        n = GetNumPredefinedUserParms()



    :rtype: int
    :return: int Number of pre-defined user Parms
    """
    return _vsp_g.GetNumPredefinedUserParms()

def GetAllUserParms():
    r"""
    Get the vector of id's for all user parameters


    .. code-block:: python

        id_arr = GetAllUserParms()

        print( "---> User Parm IDs: " )

        for i in range(int( len(id_arr) )):

            message = "\t" + id_arr[i] + "\n"

            print( message )


    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector <string> Array of user parameter ids
    """
    return _vsp_g.GetAllUserParms()

def GetUserParmContainer():
    r"""
    Get the user parm container ID


    .. code-block:: python

        up_id = GetUserParmContainer()


    :rtype: string
    :return: string User parm container ID
    """
    return _vsp_g.GetUserParmContainer()

def AddUserParm(type, name, group):
    r"""
    Function to add a new user Parm of input type, name, and group


    .. code-block:: python

        length = AddUserParm( PARM_DOUBLE_TYPE, "Length", "Design" )

        SetParmValLimits( length, 10.0, 0.001, 1.0e12 )

        SetParmDescript( length, "Length user parameter" )


    See also: PARM_TYPE
    :param [in]: type int Parm type enum (i.e. PARM_DOUBLE_TYPE)
    :param [in]: name string Parm name
    :param [in]: group string Parm group
    :rtype: string
    :return: string Parm ID
    """
    return _vsp_g.AddUserParm(type, name, group)

def DeleteUserParm(id):
    r"""
    Get the user parm container ID


    .. code-block:: python


        n = GetNumPredefinedUserParms()
        id_arr = GetAllUserParms()

        if  len(id_arr) > n :
            DeleteUserParm( id_arr[n] )


    """
    return _vsp_g.DeleteUserParm(id)

def DeleteAllUserParm():
    r"""
    Get the user parm container ID


    .. code-block:: python

        DeleteAllUserParm()


    """
    return _vsp_g.DeleteAllUserParm()

def ComputeMinClearanceDistance(*args):
    r"""
    Compute the minimum clearance distance for the specified geometry


    .. code-block:: python

        fid = AddGeom( "FUSELAGE", "" )             # Add Fuselage

        pid = AddGeom( "POD", "" )                     # Add Pod

        x = GetParm( pid, "X_Rel_Location", "XForm" )

        SetParmVal( x, 3.0 )

        Update()

        min_dist = ComputeMinClearanceDistance( pid, SET_ALL )


    :param [in]: geom_id string Geom ID
    :param [in]: set int Collision set enum (i.e. SET_ALL)
    :param [in]: useMode bool Flag determine if mode is used instead of sets
    :param [in]: modeID string ID of Mode to use
    :rtype: float
    :return: double Minimum clearance distance
    """
    return _vsp_g.ComputeMinClearanceDistance(*args)

def SnapParm(*args):
    r"""
    Snap the specified Parm to input target minimum clearance distance


    .. code-block:: python

        #Add Geoms
        fid = AddGeom( "FUSELAGE", "" )             # Add Fuselage

        pid = AddGeom( "POD", "" )                     # Add Pod

        x = GetParm( pid, "X_Rel_Location", "XForm" )

        SetParmVal( x, 3.0 )

        Update()

        min_dist = SnapParm( x, 0.1, True, SET_ALL )


    :param [in]: parm_id string Parm ID
    :param [in]: target_min_dist double Target minimum clearance distance
    :param [in]: inc_flag bool Direction indication flag. If true, upper parm limit is used and direction is set to positive
    :param [in]: set int Collision set enum (i.e. SET_ALL)
    :param [in]: useMode bool Flag determine if mode is used instead of sets
    :param [in]: modeID string ID of Mode to use
    :rtype: float
    :return: double Minimum clearance distance
    """
    return _vsp_g.SnapParm(*args)

def AddVarPresetGroup(group_name):
    r"""
    Add a Variable Preset Group


    .. code-block:: python

        # Add Pod Geom
        pod1 = AddGeom( "POD", "" )

        gid = AddVarPresetGroup( "Tess" )

    :param [in]: group_name string Name for Var Preset Group
    :rtype: string
    :return: string Var Preset Group ID
    """
    return _vsp_g.AddVarPresetGroup(group_name)

def AddVarPresetSetting(group_id, setting_name):
    r"""
    Add a Setting to the Variable Preset Group


    .. code-block:: python

        # Add Pod Geom
        pod1 = AddGeom( "POD", "" )

        gid = AddVarPresetGroup( "Tess" )

        sid = AddVarPresetSetting( gid, "Coarse" )


    :param [in]: group_id string Var Preset Group ID
    :param [in]: setting_name string Var Preset Setting Name
    :rtype: string
    :return: string Var Preset Setting ID
    """
    return _vsp_g.AddVarPresetSetting(group_id, setting_name)

def AddVarPresetParm(group_id, parm_id):
    r"""
    Add a Parm to the Variable Preset Group


    .. code-block:: python

        # Add Pod Geom
        pod1 = AddGeom( "POD", "" )

        gid = AddVarPresetGroup( "Tess" )

        sid = AddVarPresetSetting( gid, "Coarse" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )

        AddVarPresetParm( gid, p1 )


    :param [in]: group_id string Var Preset Group ID
    :param [in]: parm_id string Parm ID
    """
    return _vsp_g.AddVarPresetParm(group_id, parm_id)

def DeleteVarPresetGroup(group_id):
    r"""
    Delete Variable Preset Group (and all contained settings)


    .. code-block:: python

        # Add Pod Geom
        pod1 = AddGeom( "POD", "" )

        gid = AddVarPresetGroup( "Tess" )

        sid = AddVarPresetSetting( gid, "Coarse" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )

        AddVarPresetParm( gid, p1 )

        DeleteVarPresetGroup( gid )


    :param [in]: group_id string Var Preset Group ID
    """
    return _vsp_g.DeleteVarPresetGroup(group_id)

def DeleteVarPresetSetting(group_id, setting_id):
    r"""
    Delete Variable Preset Setting


    .. code-block:: python

        # Add Pod Geom
        pod1 = AddGeom( "POD", "" )

        gid = AddVarPresetGroup( "Tess" )

        sid = AddVarPresetSetting( gid, "Coarse" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )

        AddVarPresetParm( gid, p1 )

        DeleteVarPresetSetting( gid, sid )


    :param [in]: group_id string Var Preset Group ID
    :param [in]: setting_id string Var Preset Setting ID
    """
    return _vsp_g.DeleteVarPresetSetting(group_id, setting_id)

def DeleteVarPresetParm(group_id, parm_id):
    r"""
    Delete Parm from Variable Preset Group


    .. code-block:: python

        # Add Pod Geom
        pod1 = AddGeom( "POD", "" )

        gid = AddVarPresetGroup( "Tess" )

        sid = AddVarPresetSetting( gid, "Coarse" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )

        AddVarPresetParm( gid, p1 )

        DeleteVarPresetParm( gid, p1 )


    :param [in]: group_id string Var Preset Group ID
    :param [in]: parm_id string Var Parm ID
    """
    return _vsp_g.DeleteVarPresetParm(group_id, parm_id)

def SetVarPresetParmVal(group_id, setting_id, parm_id, parm_val):
    r"""
    Set value for Parm in Var Preset Setting


    .. code-block:: python

        # Add Pod Geom
        pod1 = AddGeom( "POD", "" )

        gid = AddVarPresetGroup( "Tess" )

        sid = AddVarPresetSetting( gid, "Coarse" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )

        AddVarPresetParm( gid, p1 )

        SetVarPresetParmVal( gid, sid, p1, 51 )


    :param [in]: group_id string Var Preset Group ID
    :param [in]: setting_id string Var Preset Setting ID
    :param [in]: parm_id string Var Parm ID
    :param [in]: parm_val double Parm value
    """
    return _vsp_g.SetVarPresetParmVal(group_id, setting_id, parm_id, parm_val)

def GetVarPresetParmVal(group_id, setting_id, parm_id):
    r"""
    Get value for Parm in Var Preset Setting


    .. code-block:: python

        # Add Pod Geom
        pod1 = AddGeom( "POD", "" )

        gid = AddVarPresetGroup( "Tess" )

        sid = AddVarPresetSetting( gid, "Coarse" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )

        AddVarPresetParm( gid, p1 )

        val = GetVarPresetParmVal( gid, sid, p1 )


    :param [in]: group_id string Var Preset Group ID
    :param [in]: setting_id string Var Preset Setting ID
    :param [in]: parm_id string Var Parm ID
    :rtype: float
    :return: double Var Preset Parm value
    """
    return _vsp_g.GetVarPresetParmVal(group_id, setting_id, parm_id)

def GetGroupName(group_id):
    r"""
    Get Variable Preset group name


    .. code-block:: python

        # Add Pod Geom
        pod1 = AddGeom( "POD", "" )

        gid = AddVarPresetGroup( "Tess" )

        name = GetGroupName( gid )


    :param [in]: group_id string Var Preset Group ID
    :rtype: string
    :return: string Var Preset Group name
    """
    return _vsp_g.GetGroupName(group_id)

def GetSettingName(setting_id):
    r"""
    Get Variable Preset Setting name


    .. code-block:: python

        # Add Pod Geom
        pod1 = AddGeom( "POD", "" )

        gid = AddVarPresetGroup( "Tess" )

        sid = AddVarPresetSetting( gid, "Coarse" )

        name = GetSettingName( sid )


    :param [in]: setting_id string Var Preset Setting ID
    :rtype: string
    :return: string Var Preset Setting name
    """
    return _vsp_g.GetSettingName(setting_id)

def SetGroupName(group_id, group_name):
    r"""
    Set Variable Preset group name


    .. code-block:: python

        # Add Pod Geom
        pod1 = AddGeom( "POD", "" )

        gid = AddVarPresetGroup( "Tess" )

        SetGroupName( gid, "Resolution" )


    :param [in]: group_id string Var Preset Group ID
    :param [in]: group_name string New Var Preset Group name
    """
    return _vsp_g.SetGroupName(group_id, group_name)

def SetSettingName(setting_id, setting_name):
    r"""
    Set Variable Preset Setting name


    .. code-block:: python

        # Add Pod Geom
        pod1 = AddGeom( "POD", "" )

        gid = AddVarPresetGroup( "Tess" )

        sid = AddVarPresetSetting( gid, "Coarse" )

        SetSettingName( sid, "Low" )


    :param [in]: setting_id string Var Preset Setting ID
    :param [in]: setting_name string New Var Preset Setting name
    """
    return _vsp_g.SetSettingName(setting_id, setting_name)

def GetVarPresetGroups():
    r"""
    Get group_ids for Variable Preset Groups


    .. code-block:: python

        # Add Pod Geom
        pod1 = AddGeom( "POD", "" )

        gid = AddVarPresetGroup( "Tess" )

        sid = AddVarPresetSetting( gid, "Coarse" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )

        AddVarPresetParm( gid, p1 )

        group_ids = GetVarPresetGroups()


    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: array<string> Array of Variable Preset Group IDs
    """
    return _vsp_g.GetVarPresetGroups()

def GetVarPresetSettings(group_id):
    r"""
    Get Setting IDs for Variable Preset Group


    .. code-block:: python

        # Add Pod Geom
        pod1 = AddGeom( "POD", "" )

        gid = AddVarPresetGroup( "Tess" )

        sid = AddVarPresetSetting( gid, "Coarse" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )

        AddVarPresetParm( gid, p1 )

        settingds = GetVarPresetSettings( gid )


    :param [in]: group_id string Var Preset Group ID
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: array<string> Array of Variable Preset Group ParmIDs
    """
    return _vsp_g.GetVarPresetSettings(group_id)

def GetVarPresetParmIDs(group_id):
    r"""
    Get ParmIDs for Variable Preset Group


    .. code-block:: python

        # Add Pod Geom
        pod1 = AddGeom( "POD", "" )

        gid = AddVarPresetGroup( "Tess" )

        sid = AddVarPresetSetting( gid, "Coarse" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )

        AddVarPresetParm( gid, p1 )

        parmids = GetVarPresetParmIDs( gid )


    :param [in]: group_id string Var Preset Group ID
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: array<string> Array of Variable Preset Group ParmIDs
    """
    return _vsp_g.GetVarPresetParmIDs(group_id)

def GetVarPresetParmVals(setting_id):
    r"""
    Get Parm values for Variable Preset Setting


    .. code-block:: python

        # Add Pod Geom
        pod1 = AddGeom( "POD", "" )

        gid = AddVarPresetGroup( "Tess" )

        sid = AddVarPresetSetting( gid, "Coarse" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )

        AddVarPresetParm( gid, p1 )

        parmval_vec = GetVarPresetParmVals( sid )


    :param [in]: setting_id string Var Preset Setting ID
    :rtype: std::vector< double,std::allocator< double > >
    :return: array<double> Var Preset Parm values for Setting

    """
    return _vsp_g.GetVarPresetParmVals(setting_id)

def SetVarPresetParmVals(setting_id, parm_vals):
    r"""
    Set Parm values for Variable Preset Setting


    .. code-block:: python

        # Add Pod Geom
        pod1 = AddGeom( "POD", "" )

        gid = AddVarPresetGroup( "Tess" )

        sid = AddVarPresetSetting( gid, "Coarse" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )

        AddVarPresetParm( gid, p1 )

        vals = [ 45 ]

        SetVarPresetParmVals( sid, vals )


    :param [in]: setting_id string Var Preset Setting ID
    :param [in]: parm_vals array<double> Array of Variable Preset Group Parm values
    """
    return _vsp_g.SetVarPresetParmVals(setting_id, parm_vals)

def SaveVarPresetParmVals(group_id, setting_id):
    r"""
    Save current Parm values to Variable Preset Setting


    .. code-block:: python

        # Add Pod Geom
        pod1 = AddGeom( "POD", "" )

        gid = AddVarPresetGroup( "Tess" )

        sid = AddVarPresetSetting( gid, "Coarse" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )

        AddVarPresetParm( gid, p1 )

        SaveVarPresetParmVals( gid, sid )


    :param [in]: group_id string Var Preset Group ID
    :param [in]: setting_id string Var Preset Setting ID
    """
    return _vsp_g.SaveVarPresetParmVals(group_id, setting_id)

def ApplyVarPresetSetting(group_id, setting_id):
    r"""
    Apply Parm values for Var Preset Setting


    .. code-block:: python

        # Add Pod Geom
        pod1 = AddGeom( "POD", "" )

        gid = AddVarPresetGroup( "Tess" )

        sid = AddVarPresetSetting( gid, "Coarse" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )

        AddVarPresetParm( gid, p1 )

        ApplyVarPresetSetting( gid, sid )

        Update()


    :param [in]: group_id string Var Preset Group ID
    :param [in]: setting_id string Var Preset Setting ID
    """
    return _vsp_g.ApplyVarPresetSetting(group_id, setting_id)

def CreateAndAddMode(name, normal_set, degen_set):
    r"""
    Create a Mode -- a combination of Sets and Variable Presets


    .. code-block:: python

        # Illustrating use of Modes requires substantial setup of the model including components, sets, and variable presets.
        #
        # Setup boiler plate.
        pod1 = AddGeom( "POD", "" )
        wing = AddGeom( "WING", pod1 )

        SetParmVal( wing, "Trans_Attach_Flag", "Attach", ATTACH_TRANS_LMN )
        SetParmVal( wing, "L_Attach_Location", "Attach", 0.35 )

        SetSetName( SET_FIRST_USER, "NonLifting" )
        SetSetName( SET_FIRST_USER + 1, "Lifting" )

        SetSetFlag( pod1, SET_FIRST_USER, True )
        SetSetFlag( wing, SET_FIRST_USER + 1, True )


        gid = AddVarPresetGroup( "Tess" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )
        AddVarPresetParm( gid, p1 )

        p2 = FindParm( pod1, "Tess_W", "Shape" )
        AddVarPresetParm( gid, p2 )

        sid = AddVarPresetSetting( gid, "Default" )
        SaveVarPresetParmVals( gid, sid )

        sid1 = AddVarPresetSetting( gid, "Coarse" )
        SetVarPresetParmVal( gid, sid1, p1, 3 )
        SetVarPresetParmVal( gid, sid1, p2, 5 )

        sid2 = AddVarPresetSetting( gid, "Fine" )
        SetVarPresetParmVal( gid, sid, p1, 35 )
        SetVarPresetParmVal( gid, sid, p2, 21 )


        gid2 = AddVarPresetGroup( "Design" )

        p3 = FindParm( pod1, "Length", "Design" )
        AddVarPresetParm( gid2, p3 )

        p4 = FindParm( pod1, "FineRatio", "Design" )
        AddVarPresetParm( gid2, p4 )

        sid3 = AddVarPresetSetting( gid2, "Normal" )
        SaveVarPresetParmVals( gid2, sid3 )

        sid4 = AddVarPresetSetting( gid2, "ShortFat" )
        SetVarPresetParmVal( gid2, sid4, p3, 3.0 )
        SetVarPresetParmVal( gid2, sid4, p4, 5.0 )

        sid5 = AddVarPresetSetting( gid2, "LongThin" )
        SetVarPresetParmVal( gid2, sid5, p3, 20.0 )
        SetVarPresetParmVal( gid2, sid5, p4, 35.0 )

        # End of setup boiler plate.

        mid1 = CreateAndAddMode( "FatWetAreas", SET_ALL, SET_NONE )
        ModeAddGroupSetting( mid1, gid, sid1 )
        ModeAddGroupSetting( mid1, gid2, sid4 )

        mid2 = CreateAndAddMode( "ThinAero", SET_FIRST_USER, SET_FIRST_USER + 1 )
        ModeAddGroupSetting( mid2, gid, sid2 )
        ModeAddGroupSetting( mid1, gid2, sid5 )

        ApplyModeSettings( mid2 )
        Update()


    :param [in]: name string Name for new Mode
    :param [in]: normal_set int Normal set for Mode
    :param [in]: degen_set int Degen set for Mode
    :rtype: string
    :return: string Mode ID for new Mode
    """
    return _vsp_g.CreateAndAddMode(name, normal_set, degen_set)

def GetNumModes():
    r"""
    Get number of Modes in model.


    .. code-block:: python

        # Illustrating use of Modes requires substantial setup of the model including components, sets, and variable presets.
        #
        # Setup boiler plate.
        pod1 = AddGeom( "POD", "" )
        wing = AddGeom( "WING", pod1 )

        SetParmVal( wing, "Trans_Attach_Flag", "Attach", ATTACH_TRANS_LMN )
        SetParmVal( wing, "L_Attach_Location", "Attach", 0.35 )

        SetSetName( SET_FIRST_USER, "NonLifting" )
        SetSetName( SET_FIRST_USER + 1, "Lifting" )

        SetSetFlag( pod1, SET_FIRST_USER, True )
        SetSetFlag( wing, SET_FIRST_USER + 1, True )


        gid = AddVarPresetGroup( "Tess" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )
        AddVarPresetParm( gid, p1 )

        p2 = FindParm( pod1, "Tess_W", "Shape" )
        AddVarPresetParm( gid, p2 )

        sid = AddVarPresetSetting( gid, "Default" )
        SaveVarPresetParmVals( gid, sid )

        sid1 = AddVarPresetSetting( gid, "Coarse" )
        SetVarPresetParmVal( gid, sid1, p1, 3 )
        SetVarPresetParmVal( gid, sid1, p2, 5 )

        sid2 = AddVarPresetSetting( gid, "Fine" )
        SetVarPresetParmVal( gid, sid, p1, 35 )
        SetVarPresetParmVal( gid, sid, p2, 21 )


        gid2 = AddVarPresetGroup( "Design" )

        p3 = FindParm( pod1, "Length", "Design" )
        AddVarPresetParm( gid2, p3 )

        p4 = FindParm( pod1, "FineRatio", "Design" )
        AddVarPresetParm( gid2, p4 )

        sid3 = AddVarPresetSetting( gid2, "Normal" )
        SaveVarPresetParmVals( gid2, sid3 )

        sid4 = AddVarPresetSetting( gid2, "ShortFat" )
        SetVarPresetParmVal( gid2, sid4, p3, 3.0 )
        SetVarPresetParmVal( gid2, sid4, p4, 5.0 )

        sid5 = AddVarPresetSetting( gid2, "LongThin" )
        SetVarPresetParmVal( gid2, sid5, p3, 20.0 )
        SetVarPresetParmVal( gid2, sid5, p4, 35.0 )

        # End of setup boiler plate.

        mid1 = CreateAndAddMode( "FatWetAreas", SET_ALL, SET_NONE )
        ModeAddGroupSetting( mid1, gid, sid1 )
        ModeAddGroupSetting( mid1, gid2, sid4 )

        mid2 = CreateAndAddMode( "ThinAero", SET_FIRST_USER, SET_FIRST_USER + 1 )
        ModeAddGroupSetting( mid2, gid, sid2 )
        ModeAddGroupSetting( mid1, gid2, sid5 )

        ApplyModeSettings( mid2 )
        Update()

        nmod = GetNumModes()


    :rtype: int
    :return: int Number of Modes in model.
    """
    return _vsp_g.GetNumModes()

def GetAllModes():
    r"""
    Get all ModeID's in model.


    .. code-block:: python

        # Illustrating use of Modes requires substantial setup of the model including components, sets, and variable presets.
        #
        # Setup boiler plate.
        pod1 = AddGeom( "POD", "" )
        wing = AddGeom( "WING", pod1 )

        SetParmVal( wing, "Trans_Attach_Flag", "Attach", ATTACH_TRANS_LMN )
        SetParmVal( wing, "L_Attach_Location", "Attach", 0.35 )

        SetSetName( SET_FIRST_USER, "NonLifting" )
        SetSetName( SET_FIRST_USER + 1, "Lifting" )

        SetSetFlag( pod1, SET_FIRST_USER, True )
        SetSetFlag( wing, SET_FIRST_USER + 1, True )


        gid = AddVarPresetGroup( "Tess" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )
        AddVarPresetParm( gid, p1 )

        p2 = FindParm( pod1, "Tess_W", "Shape" )
        AddVarPresetParm( gid, p2 )

        sid = AddVarPresetSetting( gid, "Default" )
        SaveVarPresetParmVals( gid, sid )

        sid1 = AddVarPresetSetting( gid, "Coarse" )
        SetVarPresetParmVal( gid, sid1, p1, 3 )
        SetVarPresetParmVal( gid, sid1, p2, 5 )

        sid2 = AddVarPresetSetting( gid, "Fine" )
        SetVarPresetParmVal( gid, sid, p1, 35 )
        SetVarPresetParmVal( gid, sid, p2, 21 )


        gid2 = AddVarPresetGroup( "Design" )

        p3 = FindParm( pod1, "Length", "Design" )
        AddVarPresetParm( gid2, p3 )

        p4 = FindParm( pod1, "FineRatio", "Design" )
        AddVarPresetParm( gid2, p4 )

        sid3 = AddVarPresetSetting( gid2, "Normal" )
        SaveVarPresetParmVals( gid2, sid3 )

        sid4 = AddVarPresetSetting( gid2, "ShortFat" )
        SetVarPresetParmVal( gid2, sid4, p3, 3.0 )
        SetVarPresetParmVal( gid2, sid4, p4, 5.0 )

        sid5 = AddVarPresetSetting( gid2, "LongThin" )
        SetVarPresetParmVal( gid2, sid5, p3, 20.0 )
        SetVarPresetParmVal( gid2, sid5, p4, 35.0 )

        # End of setup boiler plate.

        mid1 = CreateAndAddMode( "FatWetAreas", SET_ALL, SET_NONE )
        ModeAddGroupSetting( mid1, gid, sid1 )
        ModeAddGroupSetting( mid1, gid2, sid4 )

        mid2 = CreateAndAddMode( "ThinAero", SET_FIRST_USER, SET_FIRST_USER + 1 )
        ModeAddGroupSetting( mid2, gid, sid2 )
        ModeAddGroupSetting( mid1, gid2, sid5 )

        ApplyModeSettings( mid2 )
        Update()

        modids = GetAllModes();


    :rtype: vector< string >
    :return: array<string> array of Mode IDs
    """
    return _vsp_g.GetAllModes()

def DelMode(mid):
    r"""
    Delete a mode from the model.


    .. code-block:: python

        # Illustrating use of Modes requires substantial setup of the model including components, sets, and variable presets.
        #
        # Setup boiler plate.
        pod1 = AddGeom( "POD", "" )
        wing = AddGeom( "WING", pod1 )

        SetParmVal( wing, "Trans_Attach_Flag", "Attach", ATTACH_TRANS_LMN )
        SetParmVal( wing, "L_Attach_Location", "Attach", 0.35 )

        SetSetName( SET_FIRST_USER, "NonLifting" )
        SetSetName( SET_FIRST_USER + 1, "Lifting" )

        SetSetFlag( pod1, SET_FIRST_USER, True )
        SetSetFlag( wing, SET_FIRST_USER + 1, True )


        gid = AddVarPresetGroup( "Tess" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )
        AddVarPresetParm( gid, p1 )

        p2 = FindParm( pod1, "Tess_W", "Shape" )
        AddVarPresetParm( gid, p2 )

        sid = AddVarPresetSetting( gid, "Default" )
        SaveVarPresetParmVals( gid, sid )

        sid1 = AddVarPresetSetting( gid, "Coarse" )
        SetVarPresetParmVal( gid, sid1, p1, 3 )
        SetVarPresetParmVal( gid, sid1, p2, 5 )

        sid2 = AddVarPresetSetting( gid, "Fine" )
        SetVarPresetParmVal( gid, sid, p1, 35 )
        SetVarPresetParmVal( gid, sid, p2, 21 )


        gid2 = AddVarPresetGroup( "Design" )

        p3 = FindParm( pod1, "Length", "Design" )
        AddVarPresetParm( gid2, p3 )

        p4 = FindParm( pod1, "FineRatio", "Design" )
        AddVarPresetParm( gid2, p4 )

        sid3 = AddVarPresetSetting( gid2, "Normal" )
        SaveVarPresetParmVals( gid2, sid3 )

        sid4 = AddVarPresetSetting( gid2, "ShortFat" )
        SetVarPresetParmVal( gid2, sid4, p3, 3.0 )
        SetVarPresetParmVal( gid2, sid4, p4, 5.0 )

        sid5 = AddVarPresetSetting( gid2, "LongThin" )
        SetVarPresetParmVal( gid2, sid5, p3, 20.0 )
        SetVarPresetParmVal( gid2, sid5, p4, 35.0 )

        # End of setup boiler plate.

        mid1 = CreateAndAddMode( "FatWetAreas", SET_ALL, SET_NONE )
        ModeAddGroupSetting( mid1, gid, sid1 )
        ModeAddGroupSetting( mid1, gid2, sid4 )

        mid2 = CreateAndAddMode( "ThinAero", SET_FIRST_USER, SET_FIRST_USER + 1 )
        ModeAddGroupSetting( mid2, gid, sid2 )
        ModeAddGroupSetting( mid1, gid2, sid5 )

        ApplyModeSettings( mid2 )
        Update()

        DelMode( mid1 )


    :param [in]: mid string Mode ID of mode to delete
    """
    return _vsp_g.DelMode(mid)

def DelAllModes():
    r"""
    Delete all modes from the model.


    .. code-block:: python

        # Illustrating use of Modes requires substantial setup of the model including components, sets, and variable presets.
        #
        # Setup boiler plate.
        pod1 = AddGeom( "POD", "" )
        wing = AddGeom( "WING", pod1 )

        SetParmVal( wing, "Trans_Attach_Flag", "Attach", ATTACH_TRANS_LMN )
        SetParmVal( wing, "L_Attach_Location", "Attach", 0.35 )

        SetSetName( SET_FIRST_USER, "NonLifting" )
        SetSetName( SET_FIRST_USER + 1, "Lifting" )

        SetSetFlag( pod1, SET_FIRST_USER, True )
        SetSetFlag( wing, SET_FIRST_USER + 1, True )


        gid = AddVarPresetGroup( "Tess" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )
        AddVarPresetParm( gid, p1 )

        p2 = FindParm( pod1, "Tess_W", "Shape" )
        AddVarPresetParm( gid, p2 )

        sid = AddVarPresetSetting( gid, "Default" )
        SaveVarPresetParmVals( gid, sid )

        sid1 = AddVarPresetSetting( gid, "Coarse" )
        SetVarPresetParmVal( gid, sid1, p1, 3 )
        SetVarPresetParmVal( gid, sid1, p2, 5 )

        sid2 = AddVarPresetSetting( gid, "Fine" )
        SetVarPresetParmVal( gid, sid, p1, 35 )
        SetVarPresetParmVal( gid, sid, p2, 21 )


        gid2 = AddVarPresetGroup( "Design" )

        p3 = FindParm( pod1, "Length", "Design" )
        AddVarPresetParm( gid2, p3 )

        p4 = FindParm( pod1, "FineRatio", "Design" )
        AddVarPresetParm( gid2, p4 )

        sid3 = AddVarPresetSetting( gid2, "Normal" )
        SaveVarPresetParmVals( gid2, sid3 )

        sid4 = AddVarPresetSetting( gid2, "ShortFat" )
        SetVarPresetParmVal( gid2, sid4, p3, 3.0 )
        SetVarPresetParmVal( gid2, sid4, p4, 5.0 )

        sid5 = AddVarPresetSetting( gid2, "LongThin" )
        SetVarPresetParmVal( gid2, sid5, p3, 20.0 )
        SetVarPresetParmVal( gid2, sid5, p4, 35.0 )

        # End of setup boiler plate.

        mid1 = CreateAndAddMode( "FatWetAreas", SET_ALL, SET_NONE )
        ModeAddGroupSetting( mid1, gid, sid1 )
        ModeAddGroupSetting( mid1, gid2, sid4 )

        mid2 = CreateAndAddMode( "ThinAero", SET_FIRST_USER, SET_FIRST_USER + 1 )
        ModeAddGroupSetting( mid2, gid, sid2 )
        ModeAddGroupSetting( mid1, gid2, sid5 )

        ApplyModeSettings( mid2 )
        Update()

        DelAllModes()


    """
    return _vsp_g.DelAllModes()

def ApplyModeSettings(mid):
    r"""
    Apply Parm settings corresponding to a Mode.


    .. code-block:: python

        # Illustrating use of Modes requires substantial setup of the model including components, sets, and variable presets.
        #
        # Setup boiler plate.
        pod1 = AddGeom( "POD", "" )
        wing = AddGeom( "WING", pod1 )

        SetParmVal( wing, "Trans_Attach_Flag", "Attach", ATTACH_TRANS_LMN )
        SetParmVal( wing, "L_Attach_Location", "Attach", 0.35 )

        SetSetName( SET_FIRST_USER, "NonLifting" )
        SetSetName( SET_FIRST_USER + 1, "Lifting" )

        SetSetFlag( pod1, SET_FIRST_USER, True )
        SetSetFlag( wing, SET_FIRST_USER + 1, True )


        gid = AddVarPresetGroup( "Tess" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )
        AddVarPresetParm( gid, p1 )

        p2 = FindParm( pod1, "Tess_W", "Shape" )
        AddVarPresetParm( gid, p2 )

        sid = AddVarPresetSetting( gid, "Default" )
        SaveVarPresetParmVals( gid, sid )

        sid1 = AddVarPresetSetting( gid, "Coarse" )
        SetVarPresetParmVal( gid, sid1, p1, 3 )
        SetVarPresetParmVal( gid, sid1, p2, 5 )

        sid2 = AddVarPresetSetting( gid, "Fine" )
        SetVarPresetParmVal( gid, sid, p1, 35 )
        SetVarPresetParmVal( gid, sid, p2, 21 )


        gid2 = AddVarPresetGroup( "Design" )

        p3 = FindParm( pod1, "Length", "Design" )
        AddVarPresetParm( gid2, p3 )

        p4 = FindParm( pod1, "FineRatio", "Design" )
        AddVarPresetParm( gid2, p4 )

        sid3 = AddVarPresetSetting( gid2, "Normal" )
        SaveVarPresetParmVals( gid2, sid3 )

        sid4 = AddVarPresetSetting( gid2, "ShortFat" )
        SetVarPresetParmVal( gid2, sid4, p3, 3.0 )
        SetVarPresetParmVal( gid2, sid4, p4, 5.0 )

        sid5 = AddVarPresetSetting( gid2, "LongThin" )
        SetVarPresetParmVal( gid2, sid5, p3, 20.0 )
        SetVarPresetParmVal( gid2, sid5, p4, 35.0 )

        # End of setup boiler plate.

        mid1 = CreateAndAddMode( "FatWetAreas", SET_ALL, SET_NONE )
        ModeAddGroupSetting( mid1, gid, sid1 )
        ModeAddGroupSetting( mid1, gid2, sid4 )

        mid2 = CreateAndAddMode( "ThinAero", SET_FIRST_USER, SET_FIRST_USER + 1 )
        ModeAddGroupSetting( mid2, gid, sid2 )
        ModeAddGroupSetting( mid1, gid2, sid5 )

        ApplyModeSettings( mid2 )
        Update()


    :param [in]: mid string Mode ID of mode to apply
    """
    return _vsp_g.ApplyModeSettings(mid)

def ShowOnlyMode(mid):
    r"""
    Show-only a mode in a model.


    .. code-block:: python

        # Illustrating use of Modes requires substantial setup of the model including components, sets, and variable presets.
        #
        # Setup boiler plate.
        pod1 = AddGeom( "POD", "" )
        wing = AddGeom( "WING", pod1 )

        SetParmVal( wing, "Trans_Attach_Flag", "Attach", ATTACH_TRANS_LMN )
        SetParmVal( wing, "L_Attach_Location", "Attach", 0.35 )

        SetSetName( SET_FIRST_USER, "NonLifting" )
        SetSetName( SET_FIRST_USER + 1, "Lifting" )

        SetSetFlag( pod1, SET_FIRST_USER, True )
        SetSetFlag( wing, SET_FIRST_USER + 1, True )


        gid = AddVarPresetGroup( "Tess" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )
        AddVarPresetParm( gid, p1 )

        p2 = FindParm( pod1, "Tess_W", "Shape" )
        AddVarPresetParm( gid, p2 )

        sid = AddVarPresetSetting( gid, "Default" )
        SaveVarPresetParmVals( gid, sid )

        sid1 = AddVarPresetSetting( gid, "Coarse" )
        SetVarPresetParmVal( gid, sid1, p1, 3 )
        SetVarPresetParmVal( gid, sid1, p2, 5 )

        sid2 = AddVarPresetSetting( gid, "Fine" )
        SetVarPresetParmVal( gid, sid, p1, 35 )
        SetVarPresetParmVal( gid, sid, p2, 21 )


        gid2 = AddVarPresetGroup( "Design" )

        p3 = FindParm( pod1, "Length", "Design" )
        AddVarPresetParm( gid2, p3 )

        p4 = FindParm( pod1, "FineRatio", "Design" )
        AddVarPresetParm( gid2, p4 )

        sid3 = AddVarPresetSetting( gid2, "Normal" )
        SaveVarPresetParmVals( gid2, sid3 )

        sid4 = AddVarPresetSetting( gid2, "ShortFat" )
        SetVarPresetParmVal( gid2, sid4, p3, 3.0 )
        SetVarPresetParmVal( gid2, sid4, p4, 5.0 )

        sid5 = AddVarPresetSetting( gid2, "LongThin" )
        SetVarPresetParmVal( gid2, sid5, p3, 20.0 )
        SetVarPresetParmVal( gid2, sid5, p4, 35.0 )

        # End of setup boiler plate.

        mid1 = CreateAndAddMode( "FatWetAreas", SET_ALL, SET_NONE )
        ModeAddGroupSetting( mid1, gid, sid1 )
        ModeAddGroupSetting( mid1, gid2, sid4 )

        mid2 = CreateAndAddMode( "ThinAero", SET_FIRST_USER, SET_FIRST_USER + 1 )
        ModeAddGroupSetting( mid2, gid, sid2 )
        ModeAddGroupSetting( mid1, gid2, sid5 )

        ApplyModeSettings( mid2 )
        Update()

        ShowOnlyMode( mid1 )


    :param [in]: mid string Mode ID of mode to show-only
    """
    return _vsp_g.ShowOnlyMode(mid)

def ModeAddGroupSetting(mid, gid, sid):
    r"""
    Add a variable preset group and setting to a mode.


    .. code-block:: python

        # Illustrating use of Modes requires substantial setup of the model including components, sets, and variable presets.
        #
        # Setup boiler plate.
        pod1 = AddGeom( "POD", "" )
        wing = AddGeom( "WING", pod1 )

        SetParmVal( wing, "Trans_Attach_Flag", "Attach", ATTACH_TRANS_LMN )
        SetParmVal( wing, "L_Attach_Location", "Attach", 0.35 )

        SetSetName( SET_FIRST_USER, "NonLifting" )
        SetSetName( SET_FIRST_USER + 1, "Lifting" )

        SetSetFlag( pod1, SET_FIRST_USER, True )
        SetSetFlag( wing, SET_FIRST_USER + 1, True )


        gid = AddVarPresetGroup( "Tess" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )
        AddVarPresetParm( gid, p1 )

        p2 = FindParm( pod1, "Tess_W", "Shape" )
        AddVarPresetParm( gid, p2 )

        sid = AddVarPresetSetting( gid, "Default" )
        SaveVarPresetParmVals( gid, sid )

        sid1 = AddVarPresetSetting( gid, "Coarse" )
        SetVarPresetParmVal( gid, sid1, p1, 3 )
        SetVarPresetParmVal( gid, sid1, p2, 5 )

        sid2 = AddVarPresetSetting( gid, "Fine" )
        SetVarPresetParmVal( gid, sid, p1, 35 )
        SetVarPresetParmVal( gid, sid, p2, 21 )


        gid2 = AddVarPresetGroup( "Design" )

        p3 = FindParm( pod1, "Length", "Design" )
        AddVarPresetParm( gid2, p3 )

        p4 = FindParm( pod1, "FineRatio", "Design" )
        AddVarPresetParm( gid2, p4 )

        sid3 = AddVarPresetSetting( gid2, "Normal" )
        SaveVarPresetParmVals( gid2, sid3 )

        sid4 = AddVarPresetSetting( gid2, "ShortFat" )
        SetVarPresetParmVal( gid2, sid4, p3, 3.0 )
        SetVarPresetParmVal( gid2, sid4, p4, 5.0 )

        sid5 = AddVarPresetSetting( gid2, "LongThin" )
        SetVarPresetParmVal( gid2, sid5, p3, 20.0 )
        SetVarPresetParmVal( gid2, sid5, p4, 35.0 )

        # End of setup boiler plate.

        mid1 = CreateAndAddMode( "FatWetAreas", SET_ALL, SET_NONE )
        ModeAddGroupSetting( mid1, gid, sid1 )
        ModeAddGroupSetting( mid1, gid2, sid4 )

        mid2 = CreateAndAddMode( "ThinAero", SET_FIRST_USER, SET_FIRST_USER + 1 )
        ModeAddGroupSetting( mid2, gid, sid2 )
        ModeAddGroupSetting( mid1, gid2, sid5 )

        ApplyModeSettings( mid2 )
        Update()


    :param [in]: mid string Mode ID to add variable preset to
    :param [in]: gid string Variable preset group ID to add to mode
    :param [in]: sid string Variable preset setting ID to add to mode
    """
    return _vsp_g.ModeAddGroupSetting(mid, gid, sid)

def ModeGetGroup(mid, indx):
    r"""
    Get the group ID of var preset indx from a mode.


    .. code-block:: python

        # Illustrating use of Modes requires substantial setup of the model including components, sets, and variable presets.
        #
        # Setup boiler plate.
        pod1 = AddGeom( "POD", "" )
        wing = AddGeom( "WING", pod1 )

        SetParmVal( wing, "Trans_Attach_Flag", "Attach", ATTACH_TRANS_LMN )
        SetParmVal( wing, "L_Attach_Location", "Attach", 0.35 )

        SetSetName( SET_FIRST_USER, "NonLifting" )
        SetSetName( SET_FIRST_USER + 1, "Lifting" )

        SetSetFlag( pod1, SET_FIRST_USER, True )
        SetSetFlag( wing, SET_FIRST_USER + 1, True )


        gid = AddVarPresetGroup( "Tess" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )
        AddVarPresetParm( gid, p1 )

        p2 = FindParm( pod1, "Tess_W", "Shape" )
        AddVarPresetParm( gid, p2 )

        sid = AddVarPresetSetting( gid, "Default" )
        SaveVarPresetParmVals( gid, sid )

        sid1 = AddVarPresetSetting( gid, "Coarse" )
        SetVarPresetParmVal( gid, sid1, p1, 3 )
        SetVarPresetParmVal( gid, sid1, p2, 5 )

        sid2 = AddVarPresetSetting( gid, "Fine" )
        SetVarPresetParmVal( gid, sid, p1, 35 )
        SetVarPresetParmVal( gid, sid, p2, 21 )


        gid2 = AddVarPresetGroup( "Design" )

        p3 = FindParm( pod1, "Length", "Design" )
        AddVarPresetParm( gid2, p3 )

        p4 = FindParm( pod1, "FineRatio", "Design" )
        AddVarPresetParm( gid2, p4 )

        sid3 = AddVarPresetSetting( gid2, "Normal" )
        SaveVarPresetParmVals( gid2, sid3 )

        sid4 = AddVarPresetSetting( gid2, "ShortFat" )
        SetVarPresetParmVal( gid2, sid4, p3, 3.0 )
        SetVarPresetParmVal( gid2, sid4, p4, 5.0 )

        sid5 = AddVarPresetSetting( gid2, "LongThin" )
        SetVarPresetParmVal( gid2, sid5, p3, 20.0 )
        SetVarPresetParmVal( gid2, sid5, p4, 35.0 )

        # End of setup boiler plate.

        mid1 = CreateAndAddMode( "FatWetAreas", SET_ALL, SET_NONE )
        ModeAddGroupSetting( mid1, gid, sid1 )
        ModeAddGroupSetting( mid1, gid2, sid4 )

        mid2 = CreateAndAddMode( "ThinAero", SET_FIRST_USER, SET_FIRST_USER + 1 )
        ModeAddGroupSetting( mid2, gid, sid2 )
        ModeAddGroupSetting( mid1, gid2, sid5 )

        ApplyModeSettings( mid2 )
        Update()

        gid3 = ModeGetGroup( mid1, 0 )


    :param [in]: mid string Mode ID to return GroupID
    :param [in]: indx int Index of Variable preset to return GroupID
    :rtype: string
    :return: string Group ID for Mode Variable preset indx
    """
    return _vsp_g.ModeGetGroup(mid, indx)

def ModeGetSetting(mid, indx):
    r"""
    Get the setting ID of var preset indx from a mode.


    .. code-block:: python

        # Illustrating use of Modes requires substantial setup of the model including components, sets, and variable presets.
        #
        # Setup boiler plate.
        pod1 = AddGeom( "POD", "" )
        wing = AddGeom( "WING", pod1 )

        SetParmVal( wing, "Trans_Attach_Flag", "Attach", ATTACH_TRANS_LMN )
        SetParmVal( wing, "L_Attach_Location", "Attach", 0.35 )

        SetSetName( SET_FIRST_USER, "NonLifting" )
        SetSetName( SET_FIRST_USER + 1, "Lifting" )

        SetSetFlag( pod1, SET_FIRST_USER, True )
        SetSetFlag( wing, SET_FIRST_USER + 1, True )


        gid = AddVarPresetGroup( "Tess" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )
        AddVarPresetParm( gid, p1 )

        p2 = FindParm( pod1, "Tess_W", "Shape" )
        AddVarPresetParm( gid, p2 )

        sid = AddVarPresetSetting( gid, "Default" )
        SaveVarPresetParmVals( gid, sid )

        sid1 = AddVarPresetSetting( gid, "Coarse" )
        SetVarPresetParmVal( gid, sid1, p1, 3 )
        SetVarPresetParmVal( gid, sid1, p2, 5 )

        sid2 = AddVarPresetSetting( gid, "Fine" )
        SetVarPresetParmVal( gid, sid, p1, 35 )
        SetVarPresetParmVal( gid, sid, p2, 21 )


        gid2 = AddVarPresetGroup( "Design" )

        p3 = FindParm( pod1, "Length", "Design" )
        AddVarPresetParm( gid2, p3 )

        p4 = FindParm( pod1, "FineRatio", "Design" )
        AddVarPresetParm( gid2, p4 )

        sid3 = AddVarPresetSetting( gid2, "Normal" )
        SaveVarPresetParmVals( gid2, sid3 )

        sid4 = AddVarPresetSetting( gid2, "ShortFat" )
        SetVarPresetParmVal( gid2, sid4, p3, 3.0 )
        SetVarPresetParmVal( gid2, sid4, p4, 5.0 )

        sid5 = AddVarPresetSetting( gid2, "LongThin" )
        SetVarPresetParmVal( gid2, sid5, p3, 20.0 )
        SetVarPresetParmVal( gid2, sid5, p4, 35.0 )

        # End of setup boiler plate.

        mid1 = CreateAndAddMode( "FatWetAreas", SET_ALL, SET_NONE )
        ModeAddGroupSetting( mid1, gid, sid1 )
        ModeAddGroupSetting( mid1, gid2, sid4 )

        mid2 = CreateAndAddMode( "ThinAero", SET_FIRST_USER, SET_FIRST_USER + 1 )
        ModeAddGroupSetting( mid2, gid, sid2 )
        ModeAddGroupSetting( mid1, gid2, sid5 )

        ApplyModeSettings( mid2 )
        Update()

        sid6 = ModeGetSetting( mid1, 0 )


    :param [in]: mid string Mode ID to return settingID
    :param [in]: indx int Index of Variable preset to return SettingID
    :rtype: string
    :return: string Setting ID for Mode Variable preset indx
    """
    return _vsp_g.ModeGetSetting(mid, indx)

def ModeGetAllGroups(mid):
    r"""
    Get all var preset group IDs in model.


    .. code-block:: python

        # Illustrating use of Modes requires substantial setup of the model including components, sets, and variable presets.
        #
        # Setup boiler plate.
        pod1 = AddGeom( "POD", "" )
        wing = AddGeom( "WING", pod1 )

        SetParmVal( wing, "Trans_Attach_Flag", "Attach", ATTACH_TRANS_LMN )
        SetParmVal( wing, "L_Attach_Location", "Attach", 0.35 )

        SetSetName( SET_FIRST_USER, "NonLifting" )
        SetSetName( SET_FIRST_USER + 1, "Lifting" )

        SetSetFlag( pod1, SET_FIRST_USER, True )
        SetSetFlag( wing, SET_FIRST_USER + 1, True )


        gid = AddVarPresetGroup( "Tess" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )
        AddVarPresetParm( gid, p1 )

        p2 = FindParm( pod1, "Tess_W", "Shape" )
        AddVarPresetParm( gid, p2 )

        sid = AddVarPresetSetting( gid, "Default" )
        SaveVarPresetParmVals( gid, sid )

        sid1 = AddVarPresetSetting( gid, "Coarse" )
        SetVarPresetParmVal( gid, sid1, p1, 3 )
        SetVarPresetParmVal( gid, sid1, p2, 5 )

        sid2 = AddVarPresetSetting( gid, "Fine" )
        SetVarPresetParmVal( gid, sid, p1, 35 )
        SetVarPresetParmVal( gid, sid, p2, 21 )


        gid2 = AddVarPresetGroup( "Design" )

        p3 = FindParm( pod1, "Length", "Design" )
        AddVarPresetParm( gid2, p3 )

        p4 = FindParm( pod1, "FineRatio", "Design" )
        AddVarPresetParm( gid2, p4 )

        sid3 = AddVarPresetSetting( gid2, "Normal" )
        SaveVarPresetParmVals( gid2, sid3 )

        sid4 = AddVarPresetSetting( gid2, "ShortFat" )
        SetVarPresetParmVal( gid2, sid4, p3, 3.0 )
        SetVarPresetParmVal( gid2, sid4, p4, 5.0 )

        sid5 = AddVarPresetSetting( gid2, "LongThin" )
        SetVarPresetParmVal( gid2, sid5, p3, 20.0 )
        SetVarPresetParmVal( gid2, sid5, p4, 35.0 )

        # End of setup boiler plate.

        mid1 = CreateAndAddMode( "FatWetAreas", SET_ALL, SET_NONE )
        ModeAddGroupSetting( mid1, gid, sid1 )
        ModeAddGroupSetting( mid1, gid2, sid4 )

        mid2 = CreateAndAddMode( "ThinAero", SET_FIRST_USER, SET_FIRST_USER + 1 )
        ModeAddGroupSetting( mid2, gid, sid2 )
        ModeAddGroupSetting( mid1, gid2, sid5 )

        ApplyModeSettings( mid2 )
        Update()

        gids = ModeGetAllGroups( mid1 )


    :param [in]: mid string Mode ID to return all group IDs
    :rtype: vector< string >
    :return: array<string> array of Group IDs
    """
    return _vsp_g.ModeGetAllGroups(mid)

def ModeGetAllSettings(mid):
    r"""
    Get all var preset setting IDs in model.


    .. code-block:: python

        # Illustrating use of Modes requires substantial setup of the model including components, sets, and variable presets.
        #
        # Setup boiler plate.
        pod1 = AddGeom( "POD", "" )
        wing = AddGeom( "WING", pod1 )

        SetParmVal( wing, "Trans_Attach_Flag", "Attach", ATTACH_TRANS_LMN )
        SetParmVal( wing, "L_Attach_Location", "Attach", 0.35 )

        SetSetName( SET_FIRST_USER, "NonLifting" )
        SetSetName( SET_FIRST_USER + 1, "Lifting" )

        SetSetFlag( pod1, SET_FIRST_USER, True )
        SetSetFlag( wing, SET_FIRST_USER + 1, True )


        gid = AddVarPresetGroup( "Tess" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )
        AddVarPresetParm( gid, p1 )

        p2 = FindParm( pod1, "Tess_W", "Shape" )
        AddVarPresetParm( gid, p2 )

        sid = AddVarPresetSetting( gid, "Default" )
        SaveVarPresetParmVals( gid, sid )

        sid1 = AddVarPresetSetting( gid, "Coarse" )
        SetVarPresetParmVal( gid, sid1, p1, 3 )
        SetVarPresetParmVal( gid, sid1, p2, 5 )

        sid2 = AddVarPresetSetting( gid, "Fine" )
        SetVarPresetParmVal( gid, sid, p1, 35 )
        SetVarPresetParmVal( gid, sid, p2, 21 )


        gid2 = AddVarPresetGroup( "Design" )

        p3 = FindParm( pod1, "Length", "Design" )
        AddVarPresetParm( gid2, p3 )

        p4 = FindParm( pod1, "FineRatio", "Design" )
        AddVarPresetParm( gid2, p4 )

        sid3 = AddVarPresetSetting( gid2, "Normal" )
        SaveVarPresetParmVals( gid2, sid3 )

        sid4 = AddVarPresetSetting( gid2, "ShortFat" )
        SetVarPresetParmVal( gid2, sid4, p3, 3.0 )
        SetVarPresetParmVal( gid2, sid4, p4, 5.0 )

        sid5 = AddVarPresetSetting( gid2, "LongThin" )
        SetVarPresetParmVal( gid2, sid5, p3, 20.0 )
        SetVarPresetParmVal( gid2, sid5, p4, 35.0 )

        # End of setup boiler plate.

        mid1 = CreateAndAddMode( "FatWetAreas", SET_ALL, SET_NONE )
        ModeAddGroupSetting( mid1, gid, sid1 )
        ModeAddGroupSetting( mid1, gid2, sid4 )

        mid2 = CreateAndAddMode( "ThinAero", SET_FIRST_USER, SET_FIRST_USER + 1 )
        ModeAddGroupSetting( mid2, gid, sid2 )
        ModeAddGroupSetting( mid1, gid2, sid5 )

        ApplyModeSettings( mid2 )
        Update()

        sids = ModeGetAllSettings( mid1 )


    :param [in]: mid string Mode ID to return all group IDs
    :rtype: vector< string >
    :return: array<string> array of Group IDs
    """
    return _vsp_g.ModeGetAllSettings(mid)

def RemoveGroupSetting(mid, indx):
    r"""
    Remove the indx'th variable preset group and setting from the specified mode.


    .. code-block:: python

        # Illustrating use of Modes requires substantial setup of the model including components, sets, and variable presets.
        #
        # Setup boiler plate.
        pod1 = AddGeom( "POD", "" )
        wing = AddGeom( "WING", pod1 )

        SetParmVal( wing, "Trans_Attach_Flag", "Attach", ATTACH_TRANS_LMN )
        SetParmVal( wing, "L_Attach_Location", "Attach", 0.35 )

        SetSetName( SET_FIRST_USER, "NonLifting" )
        SetSetName( SET_FIRST_USER + 1, "Lifting" )

        SetSetFlag( pod1, SET_FIRST_USER, True )
        SetSetFlag( wing, SET_FIRST_USER + 1, True )


        gid = AddVarPresetGroup( "Tess" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )
        AddVarPresetParm( gid, p1 )

        p2 = FindParm( pod1, "Tess_W", "Shape" )
        AddVarPresetParm( gid, p2 )

        sid = AddVarPresetSetting( gid, "Default" )
        SaveVarPresetParmVals( gid, sid )

        sid1 = AddVarPresetSetting( gid, "Coarse" )
        SetVarPresetParmVal( gid, sid1, p1, 3 )
        SetVarPresetParmVal( gid, sid1, p2, 5 )

        sid2 = AddVarPresetSetting( gid, "Fine" )
        SetVarPresetParmVal( gid, sid, p1, 35 )
        SetVarPresetParmVal( gid, sid, p2, 21 )


        gid2 = AddVarPresetGroup( "Design" )

        p3 = FindParm( pod1, "Length", "Design" )
        AddVarPresetParm( gid2, p3 )

        p4 = FindParm( pod1, "FineRatio", "Design" )
        AddVarPresetParm( gid2, p4 )

        sid3 = AddVarPresetSetting( gid2, "Normal" )
        SaveVarPresetParmVals( gid2, sid3 )

        sid4 = AddVarPresetSetting( gid2, "ShortFat" )
        SetVarPresetParmVal( gid2, sid4, p3, 3.0 )
        SetVarPresetParmVal( gid2, sid4, p4, 5.0 )

        sid5 = AddVarPresetSetting( gid2, "LongThin" )
        SetVarPresetParmVal( gid2, sid5, p3, 20.0 )
        SetVarPresetParmVal( gid2, sid5, p4, 35.0 )

        # End of setup boiler plate.

        mid1 = CreateAndAddMode( "FatWetAreas", SET_ALL, SET_NONE )
        ModeAddGroupSetting( mid1, gid, sid1 )
        ModeAddGroupSetting( mid1, gid2, sid4 )

        mid2 = CreateAndAddMode( "ThinAero", SET_FIRST_USER, SET_FIRST_USER + 1 )
        ModeAddGroupSetting( mid2, gid, sid2 )
        ModeAddGroupSetting( mid1, gid2, sid5 )

        ApplyModeSettings( mid2 )
        Update()

        RemoveGroupSetting( mid1, 0 )


    :param [in]: mid string Mode ID to remove varible preset group and setting from
    :param [in]: indx int Index of Variable preset to remove
    """
    return _vsp_g.RemoveGroupSetting(mid, indx)

def RemoveAllGroupSettings(mid):
    r"""
    Remove all variable preset groups and settings from mode.


    .. code-block:: python

        # Illustrating use of Modes requires substantial setup of the model including components, sets, and variable presets.
        #
        # Setup boiler plate.
        pod1 = AddGeom( "POD", "" )
        wing = AddGeom( "WING", pod1 )

        SetParmVal( wing, "Trans_Attach_Flag", "Attach", ATTACH_TRANS_LMN )
        SetParmVal( wing, "L_Attach_Location", "Attach", 0.35 )

        SetSetName( SET_FIRST_USER, "NonLifting" )
        SetSetName( SET_FIRST_USER + 1, "Lifting" )

        SetSetFlag( pod1, SET_FIRST_USER, True )
        SetSetFlag( wing, SET_FIRST_USER + 1, True )


        gid = AddVarPresetGroup( "Tess" )

        p1 = FindParm( pod1, "Tess_U", "Shape" )
        AddVarPresetParm( gid, p1 )

        p2 = FindParm( pod1, "Tess_W", "Shape" )
        AddVarPresetParm( gid, p2 )

        sid = AddVarPresetSetting( gid, "Default" )
        SaveVarPresetParmVals( gid, sid )

        sid1 = AddVarPresetSetting( gid, "Coarse" )
        SetVarPresetParmVal( gid, sid1, p1, 3 )
        SetVarPresetParmVal( gid, sid1, p2, 5 )

        sid2 = AddVarPresetSetting( gid, "Fine" )
        SetVarPresetParmVal( gid, sid, p1, 35 )
        SetVarPresetParmVal( gid, sid, p2, 21 )


        gid2 = AddVarPresetGroup( "Design" )

        p3 = FindParm( pod1, "Length", "Design" )
        AddVarPresetParm( gid2, p3 )

        p4 = FindParm( pod1, "FineRatio", "Design" )
        AddVarPresetParm( gid2, p4 )

        sid3 = AddVarPresetSetting( gid2, "Normal" )
        SaveVarPresetParmVals( gid2, sid3 )

        sid4 = AddVarPresetSetting( gid2, "ShortFat" )
        SetVarPresetParmVal( gid2, sid4, p3, 3.0 )
        SetVarPresetParmVal( gid2, sid4, p4, 5.0 )

        sid5 = AddVarPresetSetting( gid2, "LongThin" )
        SetVarPresetParmVal( gid2, sid5, p3, 20.0 )
        SetVarPresetParmVal( gid2, sid5, p4, 35.0 )

        # End of setup boiler plate.

        mid1 = CreateAndAddMode( "FatWetAreas", SET_ALL, SET_NONE )
        ModeAddGroupSetting( mid1, gid, sid1 )
        ModeAddGroupSetting( mid1, gid2, sid4 )

        mid2 = CreateAndAddMode( "ThinAero", SET_FIRST_USER, SET_FIRST_USER + 1 )
        ModeAddGroupSetting( mid2, gid, sid2 )
        ModeAddGroupSetting( mid1, gid2, sid5 )

        ApplyModeSettings( mid2 )
        Update()

        RemoveAllGroupSettings( mid1 )


    :param [in]: mid string Mode ID to remove all variable presets from
    """
    return _vsp_g.RemoveAllGroupSettings(mid)

def SetPCurve(geom_id, pcurveid, tvec, valvec, newtype):
    r"""
    Set the parameters, values, and curve type of a propeller blade curve (P Curve)
    See also: PCURV_TYPE
    :param [in]: geom_id string Parent Geom ID
    :param [in]: pcurveid int P Curve index
    :param [in]: tvec vector <double> Array of parameter values
    :param [in]: valvec vector <double> Array of values
    :param [in]: newtype int Curve type enum (i.e. CEDIT)
    """
    return _vsp_g.SetPCurve(geom_id, pcurveid, tvec, valvec, newtype)

def PCurveConvertTo(geom_id, pcurveid, newtype):
    r"""
    Change the type of a propeller blade curve (P Curve)
    See also: PCURV_TYPE
    :param [in]: geom_id string Parent Geom ID
    :param [in]: pcurveid int P Curve index
    :param [in]: newtype int Curve type enum (i.e. CEDIT)
    """
    return _vsp_g.PCurveConvertTo(geom_id, pcurveid, newtype)

def PCurveGetType(geom_id, pcurveid):
    r"""
    Get the type of a propeller blade curve (P Curve)
    See also: PCURV_TYPE
    :param [in]: geom_id string Parent Geom ID
    :param [in]: pcurveid int P Curve index
    :rtype: int
    :return: int Curve type enum (i.e. CEDIT)
    """
    return _vsp_g.PCurveGetType(geom_id, pcurveid)

def PCurveGetTVec(geom_id, pcurveid):
    r"""
    Get the parameters of a propeller blade curve (P Curve). Each parameter is a fraction of propeller radius.
    :param [in]: geom_id string Parent Geom ID
    :param [in]: pcurveid int P Curve index
    :rtype: std::vector< double,std::allocator< double > >
    :return: vector <double> Array of parameters
    """
    return _vsp_g.PCurveGetTVec(geom_id, pcurveid)

def PCurveGetValVec(geom_id, pcurveid):
    r"""
    Get the values of a propeller blade curve (P Curve). What the values represent id dependent on the curve type (i.e. twist, chord, etc.).
    :param [in]: geom_id string Parent Geom ID
    :param [in]: pcurveid int P Curve index
    :rtype: std::vector< double,std::allocator< double > >
    :return: vector <double> Array of values
    """
    return _vsp_g.PCurveGetValVec(geom_id, pcurveid)

def PCurveDeletePt(geom_id, pcurveid, indx):
    r"""
    Delete a propeller blade curve (P Curve) point
    :param [in]: geom_id string Parent Geom ID
    :param [in]: pcurveid int P Curve index
    :param [in]: indx int Point index
    """
    return _vsp_g.PCurveDeletePt(geom_id, pcurveid, indx)

def PCurveSplit(geom_id, pcurveid, tsplit):
    r"""
    Split a propeller blade curve (P Curve) at the specified 1D parameter
    :param [in]: geom_id string Parent Geom ID
    :param [in]: pcurveid int P Curve index
    :param [in]: tsplit double 1D parameter split location
    :rtype: int
    :return: int Index of new control point
    """
    return _vsp_g.PCurveSplit(geom_id, pcurveid, tsplit)

def ApproximateAllPropellerPCurves(geom_id):
    r"""
    Approximate all propeller blade curves with cubic Bezier curves.


    .. code-block:: python

        # Add Propeller
        prop = AddGeom( "PROP", "" )

        ApproximateAllPropellerPCurves( prop )



    :param [in]: geom_id string Geom ID
    """
    return _vsp_g.ApproximateAllPropellerPCurves(geom_id)

def ResetPropellerThicknessCurve(geom_id):
    r"""
    Reset propeller T/C curve to match basic thickness of file-type airfoils.  Typically only used for a propeller that
    has been constructed with file-type airfoils across the blade.  The new thickness curve will be a PCHIP curve
    with t/c matching the propeller's XSecs -- unless it is a file XSec, then the Base thickness is used.


    .. code-block:: python

        # Add Propeller
        prop = AddGeom( "PROP", "" )

        ResetPropellerThicknessCurve( prop )



    :param [in]: geom_id string Geom ID
    """
    return _vsp_g.ResetPropellerThicknessCurve(geom_id)

def AutoGroupVSPAEROControlSurfaces():
    r"""
    Creates the initial default grouping for the control surfaces.
    The initial grouping collects all surface copies of the sub-surface into a single group.
    For example if a wing is defined with an aileron and that wing is symmetrical about the
    xz plane there will be a surface copy of the master wing surface as well as a copy of
    the sub-surface. The two sub-surfaces may get deflected differently during analysis
    routines and can be identified uniquely by their full name.


    .. code-block:: python

        wid = AddGeom( "WING", "" )                             # Add Wing

        aileron_id = AddSubSurf( wid, SS_CONTROL )                      # Add Control Surface Sub-Surface

        #==== Add Vertical tail and set some parameters =====//
        vert_id = AddGeom( "WING" )

        SetGeomName( vert_id, "Vert" )

        SetParmValUpdate( vert_id, "TotalArea", "WingGeom", 10.0 )
        SetParmValUpdate( vert_id, "X_Rel_Location", "XForm", 8.5 )
        SetParmValUpdate( vert_id, "X_Rel_Rotation", "XForm", 90 )

        rudder_id = AddSubSurf( vert_id, SS_CONTROL )                      # Add Control Surface Sub-Surface

        AutoGroupVSPAEROControlSurfaces()

        Update()

        print( "COMPLETE\n" )
        control_group_settings_container_id = FindContainer( "VSPAEROSettings", 0 )   # auto grouping produces parm containers within VSPAEROSettings

        #==== Set Control Surface Group Deflection Angle ====//
        print( "\tSetting control surface group deflection angles..." )

        # subsurfaces get added to groups with "CSGQualities_[geom_name]_[control_surf_name]"
        # subsurfaces gain parm name is "Surf[surfndx]_Gain" starting from 0 to NumSymmetricCopies-1

        deflection_gain_id = FindParm( control_group_settings_container_id, "Surf_" + aileron_id + "_0_Gain", "ControlSurfaceGroup_0" )
        deflection_gain_id = FindParm( control_group_settings_container_id, "Surf_" + aileron_id + "_1_Gain", "ControlSurfaceGroup_0" )

        #  deflect aileron
        deflection_angle_id = FindParm( control_group_settings_container_id, "DeflectionAngle", "ControlSurfaceGroup_0" )


    See also: CreateVSPAEROControlSurfaceGroup
    """
    return _vsp_g.AutoGroupVSPAEROControlSurfaces()

def CreateVSPAEROControlSurfaceGroup():
    r"""
    Add a new VSPAERO control surface group using the default naming convention. The control surface group will not contain any
    control surfaces until they are added.


    .. code-block:: python

        wid = AddGeom( "WING", "" )                             # Add Wing

        aileron_id = AddSubSurf( wid, SS_CONTROL )                      # Add Control Surface Sub-Surface

        group_index = CreateVSPAEROControlSurfaceGroup() # Empty control surface group

        num_group = GetNumControlSurfaceGroups()

        if  num_group != 1 : print( "Error: CreateVSPAEROControlSurfaceGroup" )


    See also: AddSelectedToCSGroup
    :rtype: int
    :return: int Index of the new VSPAERO control surface group
    """
    return _vsp_g.CreateVSPAEROControlSurfaceGroup()

def AddAllToVSPAEROControlSurfaceGroup(CSGroupIndex):
    r"""
    Add all available control surfaces to the control surface group at the specified index


    .. code-block:: python

        wid = AddGeom( "WING", "" )                             # Add Wing

        aileron_id = AddSubSurf( wid, SS_CONTROL )                      # Add Control Surface Sub-Surface

        group_index = CreateVSPAEROControlSurfaceGroup() # Empty control surface group

        AddAllToVSPAEROControlSurfaceGroup( group_index )


    :param [in]: CSGroupIndex int Index of the control surface group
    """
    return _vsp_g.AddAllToVSPAEROControlSurfaceGroup(CSGroupIndex)

def RemoveAllFromVSPAEROControlSurfaceGroup(CSGroupIndex):
    r"""
    Remove all used control surfaces from the control surface group at the specified index


    .. code-block:: python

        wid = AddGeom( "WING", "" )                             # Add Wing

        aileron_id = AddSubSurf( wid, SS_CONTROL )                      # Add Control Surface Sub-Surface

        group_index = CreateVSPAEROControlSurfaceGroup() # Empty control surface group

        AddAllToVSPAEROControlSurfaceGroup( group_index )

        RemoveAllFromVSPAEROControlSurfaceGroup( group_index ) # Empty control surface group


    :param [in]: CSGroupIndex int Index of the control surface group
    """
    return _vsp_g.RemoveAllFromVSPAEROControlSurfaceGroup(CSGroupIndex)

def GetActiveCSNameVec(CSGroupIndex):
    r"""
    Get the names of each active (used) control surface in the control surface group at the specified index


    .. code-block:: python

        wid = AddGeom( "WING", "" )                             # Add Wing

        aileron_id = AddSubSurf( wid, SS_CONTROL )                      # Add Control Surface Sub-Surface

        group_index = CreateVSPAEROControlSurfaceGroup() # Empty control surface group

        AddAllToVSPAEROControlSurfaceGroup( group_index )

        cs_name_vec = GetActiveCSNameVec( group_index )

        print( "Active CS in Group Index #", False )
        print( group_index )

        for i in range(int( len(cs_name_vec) )):

            print( cs_name_vec[i] )


    :param [in]: CSGroupIndex int Index of the control surface group
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector <string> Array of active control surface names
    """
    return _vsp_g.GetActiveCSNameVec(CSGroupIndex)

def GetCompleteCSNameVec():
    r"""
    Get the names of all control surfaces. Some may be active (used) while others may be available.


    .. code-block:: python

        wid = AddGeom( "WING", "" )                             # Add Wing

        aileron_id = AddSubSurf( wid, SS_CONTROL )                      # Add Control Surface Sub-Surface

        group_index = CreateVSPAEROControlSurfaceGroup() # Empty control surface group

        cs_name_vec = GetCompleteCSNameVec()

        print( "All Control Surfaces: ", False )

        for i in range(int( len(cs_name_vec) )):

            print( cs_name_vec[i] )


    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector <string> Array of all control surface names
    """
    return _vsp_g.GetCompleteCSNameVec()

def GetAvailableCSNameVec(CSGroupIndex):
    r"""
    Get the names of each available (not used) control surface in the control surface group at the specified index


    .. code-block:: python

        wid = AddGeom( "WING", "" ) # Add Wing

        aileron_id = AddSubSurf( wid, SS_CONTROL ) # Add Control Surface Sub-Surface

        group_index = CreateVSPAEROControlSurfaceGroup() # Empty control surface group

        cs_name_vec = GetAvailableCSNameVec( group_index )

        cs_ind_vec = [1]

        AddSelectedToCSGroup( cs_ind_vec, group_index ) # Add the first available control surface to the group


    :param [in]: CSGroupIndex int Index of the control surface group
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector <string> Array of active control surface names
    """
    return _vsp_g.GetAvailableCSNameVec(CSGroupIndex)

def SetVSPAEROControlGroupName(name, CSGroupIndex):
    r"""
    Set the name for the control surface group at the specified index


    .. code-block:: python

        wid = AddGeom( "WING", "" ) # Add Wing

        aileron_id = AddSubSurf( wid, SS_CONTROL ) # Add Control Surface Sub-Surface

        group_index = CreateVSPAEROControlSurfaceGroup() # Empty control surface group

        SetVSPAEROControlGroupName( "Example_CS_Group", group_index )

        print( "CS Group name: ", False )

        print( GetVSPAEROControlGroupName( group_index ) )


    :param [in]: name string Name to set for the control surface group
    :param [in]: CSGroupIndex int Index of the control surface group
    """
    return _vsp_g.SetVSPAEROControlGroupName(name, CSGroupIndex)

def GetVSPAEROControlGroupName(CSGroupIndex):
    r"""
    Get the name of the control surface group at the specified index


    .. code-block:: python

        wid = AddGeom( "WING", "" ) # Add Wing

        aileron_id = AddSubSurf( wid, SS_CONTROL ) # Add Control Surface Sub-Surface

        group_index = CreateVSPAEROControlSurfaceGroup() # Empty control surface group

        SetVSPAEROControlGroupName( "Example_CS_Group", group_index )

        print( "CS Group name: ", False )

        print( GetVSPAEROControlGroupName( group_index ) )


    :param [in]: CSGroupIndex int Index of the control surface group
    """
    return _vsp_g.GetVSPAEROControlGroupName(CSGroupIndex)

def AddSelectedToCSGroup(selected, CSGroupIndex):
    r"""
    Add each control surfaces in the array of control surface indexes to the control surface group at the specified index.

    Warning: The indexes in input "selected" must be matched with available control surfaces identified by GetAvailableCSNameVec.
    The "selected" input uses one- based indexing to associate available control surfaces.



    .. code-block:: python

        wid = AddGeom( "WING", "" ) # Add Wing

        aileron_id = AddSubSurf( wid, SS_CONTROL ) # Add Control Surface Sub-Surface

        group_index = CreateVSPAEROControlSurfaceGroup() # Empty control surface group

        cs_name_vec = GetAvailableCSNameVec( group_index )

        cs_ind_vec = [0] * len(cs_name_vec)

        for i in range(int( len(cs_name_vec) )):

            cs_ind_vec[i] = i + 1

        AddSelectedToCSGroup( cs_ind_vec, group_index ) # Add all available control surfaces to the group


    See also: GetAvailableCSNameVec
    :param [in]: selected vector <int> Array of control surface indexes to add to the group. Note, the integer values are one based.
    :param [in]: CSGroupIndex int Index of the control surface group
    """
    return _vsp_g.AddSelectedToCSGroup(selected, CSGroupIndex)

def RemoveSelectedFromCSGroup(selected, CSGroupIndex):
    r"""
    Remove each control surfaces in the array of control surface indexes from the control surface group at the specified index.

    Warning: The indexes in input "selected" must be matched with active control surfaces identified by GetActiveCSNameVec. The
    "selected" input uses one-based indexing to associate available control surfaces.



    .. code-block:: python

        wid = AddGeom( "WING", "" ) # Add Wing

        aileron_id = AddSubSurf( wid, SS_CONTROL ) # Add Control Surface Sub-Surface

        group_index = CreateVSPAEROControlSurfaceGroup() # Empty control surface group

        cs_name_vec = GetAvailableCSNameVec( group_index )

        cs_ind_vec = [0] * len(cs_name_vec)

        for i in range(int( len(cs_name_vec) )):

            cs_ind_vec[i] = i + 1

        AddSelectedToCSGroup( cs_ind_vec, group_index ) # Add the available control surfaces to the group

        remove_cs_ind_vec = [1]

        RemoveSelectedFromCSGroup( remove_cs_ind_vec, group_index ) # Remove the first control surface


    See also: GetActiveCSNameVec
    :param [in]: selected vector <int> Array of control surface indexes to remove from the group. Note, the integer values are one based.
    :param [in]: CSGroupIndex int Index of the control surface group
    """
    return _vsp_g.RemoveSelectedFromCSGroup(selected, CSGroupIndex)

def GetNumControlSurfaceGroups():
    r"""
    Get the total number of control surface groups


    .. code-block:: python

        wid = AddGeom( "WING", "" )                             # Add Wing

        aileron_id = AddSubSurf( wid, SS_CONTROL )                      # Add Control Surface Sub-Surface

        #==== Add Horizontal tail and set some parameters =====//
        horiz_id = AddGeom( "WING", "" )

        SetGeomName( horiz_id, "Vert" )

        SetParmValUpdate( horiz_id, "TotalArea", "WingGeom", 10.0 )
        SetParmValUpdate( horiz_id, "X_Rel_Location", "XForm", 8.5 )

        elevator_id = AddSubSurf( horiz_id, SS_CONTROL )                      # Add Control Surface Sub-Surface

        AutoGroupVSPAEROControlSurfaces()

        num_group = GetNumControlSurfaceGroups()

        if  num_group != 2 : print( "Error: GetNumControlSurfaceGroups" )


    :rtype: int
    :return: int Number of control surface groups
    """
    return _vsp_g.GetNumControlSurfaceGroups()

def FindActuatorDisk(disk_index):
    r"""
    Get the ID of a VSPAERO actuator disk at the specified index. An empty string is returned if
    the index is out of range.


    .. code-block:: python

        # Add a propeller
        prop_id = AddGeom( "PROP", "" )
        SetParmVal( prop_id, "PropMode", "Design", PROP_DISK )
        SetParmVal( prop_id, "Diameter", "Design", 6.0 )

        Update()

        # Setup the actuator disk VSPAERO parms
        disk_id = FindActuatorDisk( 0 )

        SetParmVal( FindParm( disk_id, "RotorRPM", "Rotor" ), 1234.0 )
        SetParmVal( FindParm( disk_id, "RotorCT", "Rotor" ), 0.35 )
        SetParmVal( FindParm( disk_id, "RotorCP", "Rotor" ), 0.55 )
        SetParmVal( FindParm( disk_id, "RotorHubDiameter", "Rotor" ), 1.0 )


    See also: PROP_MODE
    :param [in]: disk_index int Actuator disk index for the current VSPAERO set
    :rtype: string
    :return: string Actuator disk ID
    """
    return _vsp_g.FindActuatorDisk(disk_index)

def GetNumActuatorDisks():
    r"""
    Get the number of actuator disks in the current VSPAERO set. This is equivalent to the number of disk surfaces in the VSPAERO set.


    .. code-block:: python

        # Set VSPAERO set index to SET_ALL
        SetParmVal( FindParm( FindContainer( "VSPAEROSettings", 0 ), "GeomSet", "VSPAERO" ), SET_ALL )

        # Add a propeller
        prop_id = AddGeom( "PROP", "" )
        SetParmValUpdate( prop_id, "PropMode", "Design", PROP_BLADES )

        num_disk = GetNumActuatorDisks() # Should be 0

        SetParmValUpdate( prop_id, "PropMode", "Design", PROP_DISK )

        num_disk = GetNumActuatorDisks() # Should be 1


    See also: PROP_MODE
    :rtype: int
    :return: int Number of actuator disks in the current VSPAERO set
    """
    return _vsp_g.GetNumActuatorDisks()

def FindUnsteadyGroup(group_index):
    r"""
    Get the ID of the VSPAERO unsteady group at the specified index. An empty string is returned if
    the index is out of range.


    .. code-block:: python

        wing_id = AddGeom( "WING" )
        pod_id = AddGeom( "POD" )

        # Create an actuator disk
        prop_id = AddGeom( "PROP", "" )
        SetParmVal( prop_id, "PropMode", "Design", PROP_BLADES )

        Update()

        # Setup the unsteady group VSPAERO parms
        disk_id = FindUnsteadyGroup( 1 ) # fixed components are in group 0 (wing & pod)

        SetParmVal( FindParm( disk_id, "RPM", "UnsteadyGroup" ), 1234.0 )


    See also: PROP_MODE
    :param [in]: group_index int Unsteady group index for the current VSPAERO set
    :rtype: string
    :return: string Unsteady group ID
    """
    return _vsp_g.FindUnsteadyGroup(group_index)

def GetUnsteadyGroupName(group_index):
    r"""
    Get the name of the unsteady group at the specified index.


    .. code-block:: python

        # Add a pod and wing
        pod_id = AddGeom( "POD", "" )
        wing_id = AddGeom( "WING", pod_id )

        SetParmVal( wing_id, "X_Rel_Location", "XForm", 2.5 )
        Update()

        print( GetUnsteadyGroupName( 0 ) )


    See also: SetUnsteadyGroupName
    :param [in]: group_index int Unsteady group index for the current VSPAERO set
    :rtype: string
    :return: string Unsteady group name
    """
    return _vsp_g.GetUnsteadyGroupName(group_index)

def GetUnsteadyGroupCompIDs(group_index):
    r"""
    Get an array of IDs for all components in the unsteady group at the specified index.


    .. code-block:: python

        # Add a pod and wing
        pod_id = AddGeom( "POD", "" )
        wing_id = AddGeom( "WING", pod_id ) # Default with symmetry on -> 2 surfaces

        SetParmVal( wing_id, "X_Rel_Location", "XForm", 2.5 )
        Update()

        comp_ids = GetUnsteadyGroupCompIDs( 0 )

        if  len(comp_ids) != 3 :
            print( "ERROR: GetUnsteadyGroupCompIDs" )


    See also: GetUnsteadyGroupSurfIndexes
    :param [in]: group_index int Unsteady group index for the current VSPAERO set
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector <string> Array of component IDs
    """
    return _vsp_g.GetUnsteadyGroupCompIDs(group_index)

def GetUnsteadyGroupSurfIndexes(group_index):
    r"""
    Get an array of surface indexes for all components in the unsteady group at the specified index.


    .. code-block:: python

        # Add a pod and wing
        pod_id = AddGeom( "POD", "" )
        wing_id = AddGeom( "WING", pod_id ) # Default with symmetry on -> 2 surfaces

        SetParmVal( wing_id, "X_Rel_Location", "XForm", 2.5 )
        Update()

        surf_indexes = GetUnsteadyGroupSurfIndexes( 0 )

        if  len(surf_indexes) != 3 :
            print( "ERROR: GetUnsteadyGroupSurfIndexes" )


    See also: GetUnsteadyGroupCompIDs
    :param [in]: group_index int Unsteady group index for the current VSPAERO set
    :rtype: std::vector< int,std::allocator< int > >
    :return: vector <int> Array of surface indexes
    """
    return _vsp_g.GetUnsteadyGroupSurfIndexes(group_index)

def GetNumUnsteadyGroups():
    r"""
    Get the number of unsteady groups in the current VSPAERO set. Each propeller is placed in its own unsteady group. All symmetric copies
    of propellers are also placed in an unsteady group. All other component types are placed in a single fixed component unsteady group.


    .. code-block:: python

        # Set VSPAERO set index to SET_ALL
        SetParmVal( FindParm( FindContainer( "VSPAEROSettings", 0 ), "GeomSet", "VSPAERO" ), SET_ALL )

        # Add a propeller
        prop_id = AddGeom( "PROP" )
        SetParmValUpdate( prop_id, "PropMode", "Design", PROP_DISK )

        num_group = GetNumUnsteadyGroups() # Should be 0

        SetParmValUpdate( prop_id, "PropMode", "Design", PROP_BLADES )

        num_group = GetNumUnsteadyGroups() # Should be 1

        wing_id = AddGeom( "WING" )

        num_group = GetNumUnsteadyGroups() # Should be 2 (includes fixed component group)


    See also: PROP_MODE, GetNumUnsteadyRotorGroups
    :rtype: int
    :return: int Number of unsteady groups in the current VSPAERO set
    """
    return _vsp_g.GetNumUnsteadyGroups()

def GetNumUnsteadyRotorGroups():
    r"""
    Get the number of unsteady rotor groups in the current VSPAERO set. This is equivalent to the total number of propeller Geoms,
    including each symmetric copy, in the current VSPAERO set. While all fixed components (wings, fuseleage, etc.) are placed in
    their own unsteady group, this function does not consider them.


    .. code-block:: python

        # Set VSPAERO set index to SET_ALL
        SetParmVal( FindParm( FindContainer( "VSPAEROSettings", 0 ), "GeomSet", "VSPAERO" ), SET_ALL )

        # Add a propeller
        prop_id = AddGeom( "PROP" )
        SetParmValUpdate( prop_id, "PropMode", "Design", PROP_DISK )

        num_group = GetNumUnsteadyRotorGroups() # Should be 0

        SetParmValUpdate( prop_id, "PropMode", "Design", PROP_BLADES )

        num_group = GetNumUnsteadyRotorGroups() # Should be 1

        wing_id = AddGeom( "WING" )

        num_group = GetNumUnsteadyRotorGroups() # Should be 1 still (fixed group not included)


    See also: PROP_MODE, GetNumUnsteadyGroups
    :rtype: int
    :return: int Number of unsteady rotor groups in the current VSPAERO set
    """
    return _vsp_g.GetNumUnsteadyRotorGroups()

def AddExcrescence(excresName, excresType, excresVal):
    r"""
    Add an Excresence to the Parasite Drag Tool


    .. code-block:: python

        AddExcrescence( "Miscellaneous", EXCRESCENCE_COUNT, 8.5 )

        AddExcrescence( "Cowl Boattail", EXCRESCENCE_CD, 0.0003 )


    See also: EXCRES_TYPE
    :param [in]: excresName string Name of the Excressence
    :param [in]: excresType int Excressence type enum (i.e. EXCRESCENCE_PERCENT_GEOM)
    :param [in]: excresVal double Excressence value
    """
    return _vsp_g.AddExcrescence(excresName, excresType, excresVal)

def DeleteExcrescence(index):
    r"""
    Delete an Excresence from the Parasite Drag Tool


    .. code-block:: python

        AddExcrescence( "Miscellaneous", EXCRESCENCE_COUNT, 8.5 )

        AddExcrescence( "Cowl Boattail", EXCRESCENCE_CD, 0.0003 )

        AddExcrescence( "Percentage Example", EXCRESCENCE_PERCENT_GEOM, 5 )

        DeleteExcrescence( 2 ) # Last Index


    :param [in]: index int Index of the Excressence to delete
    """
    return _vsp_g.DeleteExcrescence(index)

def UpdateParasiteDrag():
    r"""Update any reference geometry, atmospheric properties, excressences, etc. in the Parasite Drag Tool"""
    return _vsp_g.UpdateParasiteDrag()

def WriteAtmosphereCSVFile(file_name, atmos_type):
    r"""
    Calculate the atmospheric properties determined by a specified model for a preset array of altitudes ranging from 0 to 90000 m and
    write the results to a CSV output file


    .. code-block:: python

        print( "Starting USAF Atmosphere 1966 Table Creation. \n" )

        WriteAtmosphereCSVFile( "USAFAtmosphere1966Data.csv", ATMOS_TYPE_HERRINGTON_1966 )


    See also: ATMOS_TYPE
    :param [in]: file_name string Output CSV file
    :param [in]: atmos_type int Atmospheric model enum (i.e. ATMOS_TYPE_HERRINGTON_1966)
    """
    return _vsp_g.WriteAtmosphereCSVFile(file_name, atmos_type)

def CalcAtmosphere(alt, delta_temp, atmos_type):
    r"""
    Calculate the atmospheric properties determined by a specified model at input altitude and temperature deviation. This function may
    not be used for any manual atmospheric model types (i.e. ATMOS_TYPE_MANUAL_P_T). This function assumes freestream units are metric,
    temperature units are Kelvin, and pressure units are kPA.


    .. code-block:: python


        alt = 4000

        delta_temp = 0

        temp, pres, pres_ratio, rho_ratio = CalcAtmosphere( alt, delta_temp, ATMOS_TYPE_US_STANDARD_1976)


    See also: ATMOS_TYPE
    :param [in]: alt double Altitude
    :param [in]: delta_temp double Deviation in temperature from the value specified in the atmospheric model
    :param [in]: atmos_type int Atmospheric model enum (i.e. ATMOS_TYPE_HERRINGTON_1966)
    :param [out]: temp double output Temperature
    :param [out]: pres double output Pressure
    :param [out]: pres_ratio double Output pressure ratio
    :param [out]: rho_ratio double Output density ratio
    """
    return _vsp_g.CalcAtmosphere(alt, delta_temp, atmos_type)

def WriteBodyFFCSVFile(file_name):
    r"""
    Calculate the form factor from each body FF equation (i.e. Hoerner Streamlined Body) and write the results to a CSV output file


    .. code-block:: python

        print( "Starting Body Form Factor Data Creation. \n" )
        WriteBodyFFCSVFile( "BodyFormFactorData.csv" )


    :param [in]: file_name string Output CSV file
    """
    return _vsp_g.WriteBodyFFCSVFile(file_name)

def WriteWingFFCSVFile(file_name):
    r"""
    Calculate the form factor from each wing FF equation (i.e. Schemensky 4 Series Airfoil) and write the results to a CSV output file


    .. code-block:: python

        print( "Starting Wing Form Factor Data Creation. \n" )
        WriteWingFFCSVFile( "WingFormFactorData.csv" )


    :param [in]: file_name string Output CSV file
    """
    return _vsp_g.WriteWingFFCSVFile(file_name)

def WriteCfEqnCSVFile(file_name):
    r"""
    Calculate the coefficient of friction from each Cf equation (i.e. Power Law Blasius) and write the results to a CSV output file


    .. code-block:: python

        print( "Starting Turbulent Friciton Coefficient Data Creation. \n" )
        WriteCfEqnCSVFile( "FrictionCoefficientData.csv" )


    :param [in]: file_name string Output CSV file
    """
    return _vsp_g.WriteCfEqnCSVFile(file_name)

def WritePartialCfMethodCSVFile(file_name):
    r"""
    Calculate the partial coefficient of friction and write the results to a CSV output file


    .. code-block:: python

        print( "Starting Partial Friction Method Data Creation. \n" )
        WritePartialCfMethodCSVFile( "PartialFrictionMethodData.csv" )


    :param [in]: file_name string Output CSV file
    """
    return _vsp_g.WritePartialCfMethodCSVFile(file_name)

def CompPnt01(geom_id, surf_indx, u, w):
    r"""
    Calculate the 3D coordinate equivalent for the input surface coordinate point


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0

        u = 0.12345
        w = 0.67890

        pnt = CompPnt01( geom_id, surf_indx, u, w )

        print( f"Point: ( {pnt.x()}, {pnt.y()}, {pnt.z()} )" )


    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: u double U (0 - 1) surface coordinate
    :param [in]: w double W (0 - 1) surface coordinate
    :rtype: :py:class:`vec3d`
    :return: vec3d Normal vector3D coordinate point
    """
    return _vsp_g.CompPnt01(geom_id, surf_indx, u, w)

def CompNorm01(geom_id, surf_indx, u, w):
    r"""
    Calculate the normal vector on the specified surface at input surface coordinate


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0

        u = 0.12345
        w = 0.67890

        norm = CompNorm01( geom_id, surf_indx, u, w )

        print( "Point: ( {norm.x()}, {norm.y()}, {norm.z()} )" )


    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: u double U (0 - 1) surface coordinate
    :param [in]: w double W (0 - 1) surface coordinate
    :rtype: :py:class:`vec3d`
    :return: vec3d Normal vector
    """
    return _vsp_g.CompNorm01(geom_id, surf_indx, u, w)

def CompTanU01(geom_id, surf_indx, u, w):
    r"""
    Calculate the vector tangent to the specified surface at input surface coordinate in the U direction


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0

        u = 0.12345
        w = 0.67890

        tanu = CompTanU01( geom_id, surf_indx, u, w )

        print( f"Point: ( {tanu.x()}, {tanu.y()}, {tanu.z()} )" )


    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: u double U (0 - 1) surface coordinate
    :param [in]: w double W (0 - 1) surface coordinate
    :rtype: :py:class:`vec3d`
    :return: vec3d Tangent vector in U direction
    """
    return _vsp_g.CompTanU01(geom_id, surf_indx, u, w)

def CompTanW01(geom_id, surf_indx, u, w):
    r"""
    Calculate the vector tangent to the specified surface at input surface coordinate in the W direction


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0

        u = 0.12345
        w = 0.67890

        tanw = CompTanW01( geom_id, surf_indx, u, w )

        print( f"Point: ( {tanw.x()}, {tanw.y()}, {tanw.z()} )" )


    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: u double U (0 - 1) surface coordinate
    :param [in]: w double W (0 - 1) surface coordinate
    :rtype: :py:class:`vec3d`
    :return: vec3d Tangent vector in W direction
    """
    return _vsp_g.CompTanW01(geom_id, surf_indx, u, w)

def CompCurvature01(geom_id, surf_indx, u, w):
    r"""
    Determine the curvature of a specified surface at the input surface coordinate point


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0


        u = 0.25
        w = 0.75

        k1, k2, ka, kg = CompCurvature01( geom_id, surf_indx, u, w )

        print( f"Curvature : k1 {k1} k2 {k2} ka {ka} kg {kg}" )


    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: u double U (0 - 1) surface coordinate
    :param [in]: w double W (0 - 1) surface coordinate
    :param [out]: k1_out double Output value of maximum principal curvature
    :param [out]: k2_out double Output value of minimum principal curvature
    :param [out]: ka_out double Output value of mean curvature
    :param [out]: kg_out double Output value of Gaussian curvature
    """
    return _vsp_g.CompCurvature01(geom_id, surf_indx, u, w)

def ProjPnt01(geom_id, surf_indx, pt):
    r"""
    Determine the nearest surface coordinate for an input 3D coordinate point and calculate the distance between the
    3D point and the closest point of the surface.


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0

        u = 0.12345
        w = 0.67890

        pnt = CompPnt01( geom_id, surf_indx, u, w )

        norm = CompNorm01( geom_id, surf_indx, u, w )


        # Offset point from surface
        pnt.set_xyz( pnt.x() + norm.x(), pnt.y() + norm.y(), pnt.z() + norm.z() )

        d, uout, wout = ProjPnt01( geom_id, surf_indx, pnt )

        print( f"Dist {d} u {uout} w {wout}" )


    See also: ProjPnt01Guess, ProjPnt01I
    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: pt vec3d Input 3D coordinate point
    :param [out]: u_out double Output closest U (0 - 1) surface coordinate
    :param [out]: w_out double Output closest W (0 - 1) surface coordinate
    :rtype: float
    :return: double Distance between the 3D point and the closest point of the surface
    """
    return _vsp_g.ProjPnt01(geom_id, surf_indx, pt)

def ProjPnt01I(geom_id, pt):
    r"""
    Determine the nearest surface coordinate and corresponding parent Geom main surface index for an input 3D coordinate point. Return the distance between
    the closest point and the input.


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0

        u = 0.12345
        w = 0.67890

        d = 0

        pnt = CompPnt01( geom_id, surf_indx, u, w )

        norm = CompNorm01( geom_id, surf_indx, u, w )



        # Offset point from surface
        pnt.set_xyz( pnt.x() + norm.x(), pnt.y() + norm.y(), pnt.z() + norm.z() )

        d, surf_indx_out, uout, wout = ProjPnt01I( geom_id, pnt )

        print( f"Dist {d} u {uout} w {wout} surf_index {surf_indx_out}" )


    See also: ProjPnt01, ProjPnt01Guess
    :param [in]: geom_id string Parent Geom ID
    :param [in]: pt vec3d Input 3D coordinate point
    :param [out]: surf_indx_out int Output main surface index from the parent Geom
    :param [out]: u_out double Output closest U (0 - 1) surface coordinat
    :param [out]: w_out double Output closest W (0 - 1) surface coordinat
    :rtype: float
    :return: double Distance between the 3D point and the closest point of the surface
    """
    return _vsp_g.ProjPnt01I(geom_id, pt)

def ProjPnt01Guess(geom_id, surf_indx, pt, u0, w0):
    r"""
    Determine the nearest surface coordinate for an input 3D coordinate point and calculate the distance between the
    3D point and the closest point of the surface. This function takes an input surface coordinate guess for, offering
    a potential decrease in computation time compared to ProjPnt01.


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0

        u = 0.12345
        w = 0.67890

        d = 0

        pnt = CompPnt01( geom_id, surf_indx, u, w )

        norm = CompNorm01( geom_id, surf_indx, u, w )


        # Offset point from surface
        pnt.set_xyz( pnt.x() + norm.x(), pnt.y() + norm.y(), pnt.z() + norm.z() )

        d, uout, wout = ProjPnt01Guess( geom_id, surf_indx, pnt, u + 0.1, w + 0.1 )

        print( f"Dist {d} u {uout} w {wout}" )


    See also: ProjPnt01, ProjPnt01I
    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: pt vec3d Input 3D coordinate point
    :param [in]: u0 double Input U (0 - 1) surface coordinate guess
    :param [in]: w0 double Input W (0 - 1) surface coordinate guess
    :param [out]: u_out double Output closest U (0 - 1) surface coordinate
    :param [out]: w_out double Output closest W (0 - 1) surface coordinate
    :rtype: float
    :return: double Distance between the 3D point and the closest point of the surface
    """
    return _vsp_g.ProjPnt01Guess(geom_id, surf_indx, pt, u0, w0)

def AxisProjPnt01(geom_id, surf_indx, iaxis, pt):
    r"""
    Project an input 3D coordinate point onto a surface along a specified axis.  If the axis-aligned ray from the point intersects the surface multiple times, the nearest intersection is returned.  If the axis-aligned ray from the point does not intersect the surface, the original point is returned and -1 is returned in the other output parameters.



    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0

        u = 0.12345
        w = 0.67890

        surf_pt = CompPnt01( geom_id, surf_indx, u, w )
        pt = surf_pt

        pt.offset_y( -5.0 )

        idist, u_out, w_out = AxisProjPnt01( geom_id, surf_indx, Y_DIR, pt )

        print( f"iDist {idist} u_out {u_out} w_out {w_out}" )
        print( "3D Offset ", False)


    See also: AxisProjPnt01Guess, AxisProjPnt01I, AxisProjVecPnt01, AxisProjVecPnt01Guess
    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: iaxis int Axis direction to project point along (X_DIR, Y_DIR, or Z_DIR)
    :param [in]: pt vec3d Input 3D coordinate point
    :param [out]: u_out double Output closest U (0 - 1) surface coordinate
    :param [out]: w_out double Output closest W (0 - 1) surface coordinate
    :rtype: float
    :return: double Axis aligned distance between the 3D point and the projected point on the surface
    """
    return _vsp_g.AxisProjPnt01(geom_id, surf_indx, iaxis, pt)

def AxisProjPnt01I(geom_id, iaxis, pt):
    r"""
    Project an input 3D coordinate point onto a Geom along a specified axis.  The intersecting surface index is also returned.  If the axis-aligned ray from the point intersects the Geom multiple times, the nearest intersection is returned.  If the axis-aligned ray from the point does not intersect the Geom, the original point is returned and -1 is returned in the other output parameters.



    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0

        u = 0.12345
        w = 0.67890

        surf_pt = CompPnt01( geom_id, surf_indx, u, w )
        pt = surf_pt

        pt.offset_y( -5.0 )


        idist, surf_indx_out, u_out, w_out = AxisProjPnt01I( geom_id, Y_DIR, pt )

        print( "iDist {idist} u_out {u_out} w_out {w_out} surf_index {surf_indx_out}" )
        print( "3D Offset ", False)


    See also: AxisProjPnt01, AxisProjPnt01Guess, AxisProjVecPnt01, AxisProjVecPnt01Guess
    :param [in]: geom_id string Parent Geom ID
    :param [in]: iaxis int Axis direction to project point along (X_DIR, Y_DIR, or Z_DIR)
    :param [in]: pt vec3d Input 3D coordinate point
    :param [out]: surf_indx_out int Output main surface index from the parent Geom
    :param [out]: u_out double Output closest U (0 - 1) surface coordinate
    :param [out]: w_out double Output closest W (0 - 1) surface coordinate
    :rtype: float
    :return: double Axis aligned distance between the 3D point and the projected point on the surface
    """
    return _vsp_g.AxisProjPnt01I(geom_id, iaxis, pt)

def AxisProjPnt01Guess(geom_id, surf_indx, iaxis, pt, u0, w0):
    r"""
    Project an input 3D coordinate point onto a surface along a specified axis given an initial guess of surface parameter.  If the axis-aligned ray from the point intersects the surface multiple times, the nearest intersection is returned.  If the axis-aligned ray from the point does not intersect the surface, the original point is returned and -1 is returned in the other output parameters.  The surface parameter guess should allow this call to be faster than calling AxisProjPnt01 without a guess.



    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0

        u = 0.12345
        w = 0.67890



        surf_pt = CompPnt01( geom_id, surf_indx, u, w )
        pt = surf_pt

        pt.offset_y( -5.0 )

        # Construct initial guesses near actual parameters
        u0 = u + 0.01234
        w0 = w - 0.05678

        d, uout, wout = AxisProjPnt01Guess( geom_id, surf_indx, Y_DIR, pt, u0, w0 )

        print( f"Dist {d} u {uout} w {wout}" )


    See also: AxisProjPnt01, AxisProjPnt01I, AxisProjVecPnt01, AxisProjVecPnt01Guess
    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: iaxis int Axis direction to project point along (X_DIR, Y_DIR, or Z_DIR)
    :param [in]: pt vec3d Input 3D coordinate point
    :param [in]: u0 double Input U (0 - 1) surface coordinate guess
    :param [in]: w0 double Input W (0 - 1) surface coordinate guess
    :param [out]: u_out double Output closest U (0 - 1) surface coordinate
    :param [out]: w_out double Output closest W (0 - 1) surface coordinate
    :rtype: float
    :return: double Distance between the 3D point and the closest point of the surface
    """
    return _vsp_g.AxisProjPnt01Guess(geom_id, surf_indx, iaxis, pt, u0, w0)

def InsideSurf(geom_id, surf_indx, pt):
    r"""
    Test whether a given point is inside a specified surface.



    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0

        r = 0.12
        s = 0.68
        t = 0.56

        pnt = CompPntRST( geom_id, surf_indx, r, s, t )

        res = InsideSurf( geom_id, surf_indx, pnt )

        if  res :
            print( "Inside" )
        else:
            print( "Outside" )



    See also: VecInsideSurf
    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: pt vec3d Input 3D coordinate point
    :rtype: boolean
    :return: bool Boolean true if the point is inside the surface, false otherwise.
    """
    return _vsp_g.InsideSurf(geom_id, surf_indx, pt)

def CompPntRST(geom_id, surf_indx, r, s, t):
    r"""
    Calculate the (X, Y, Z) coordinate for the input volume (R, S, T) coordinate point


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0

        r = 0.12
        s = 0.68
        t = 0.56

        pnt = CompPntRST( geom_id, surf_indx, r, s, t )

        print( f"Point: ( {pnt.x()}, {pnt.y()}, {pnt.z()} )" )


    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: r double R (0 - 1) volume coordinate
    :param [in]: s double S (0 - 1) volume coordinate
    :param [in]: t double T (0 - 1) volume coordinate
    :rtype: :py:class:`vec3d`
    :return: vec3d coordinate point
    """
    return _vsp_g.CompPntRST(geom_id, surf_indx, r, s, t)

def FindRST(geom_id, surf_indx, pt):
    r"""
    Determine the nearest (R, S, T) volume coordinate for an input (X, Y, Z) 3D coordinate point and calculate the distance between the
    3D point and the found volume point.


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0

        r = 0.12
        s = 0.68
        t = 0.56

        pnt = CompPntRST( geom_id, surf_indx, r, s, t )


        d, rout, sout, tout = FindRST( geom_id, surf_indx, pnt )

        print( f"Dist {d} r {rout} s {sout} t {tout}" )


    See also: FindRSTGuess
    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: pt vec3d Input 3D coordinate point
    :param [out]: r_out double Output closest R (0 - 1.0) volume coordinate
    :param [out]: s_out double Output closest S (0 - 1.0) volume coordinate
    :param [out]: t_out double Output closest T (0 - 1.0) volume coordinate
    :rtype: float
    :return: double Distance between the 3D point and the closest point of the volume
    """
    return _vsp_g.FindRST(geom_id, surf_indx, pt)

def FindRSTGuess(geom_id, surf_indx, pt, r0, s0, t0):
    r"""
    Determine the nearest (R, S, T) volume coordinate for an input (X, Y, Z) 3D coordinate point given an initial guess of volume coordinates.  Also calculate the distance between the
    3D point and the found volume point.



    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0

        r = 0.12
        s = 0.68
        t = 0.56

        pnt = CompPntRST( geom_id, surf_indx, r, s, t )


        r0 = 0.1
        s0 = 0.6
        t0 = 0.5

        d, rout, sout, tout = FindRSTGuess( geom_id, surf_indx, pnt, r0, s0, t0 )

        print( f"Dist {d} r {rout} s {sout} t {tout}" )


    See also: FindRST
    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: pt vec3d Input 3D coordinate point
    :param [in]: r0 double Input R (0 - 1.0) volume coordinate guess
    :param [in]: s0 double Input S (0 - 1.0) volume coordinate guess
    :param [in]: t0 double Input T (0 - 1.0) volume coordinate guess
    :param [out]: r_out double Output closest R (0 - 1.0) volume coordinate
    :param [out]: s_out double Output closest S (0 - 1.0) volume coordinate
    :param [out]: t_out double Output closest T (0 - 1.0) volume coordinate
    :rtype: float
    :return: double Distance between the 3D point and the closest point of the volume
    """
    return _vsp_g.FindRSTGuess(geom_id, surf_indx, pt, r0, s0, t0)

def ConvertRSTtoLMN(geom_id, surf_indx, r, s, t):
    r"""
    Convert RST volumetric coordinates to LMN coordinates.


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0

        r = 0.12
        s = 0.68
        t = 0.56

        l_out, m_out, n_out = ConvertRSTtoLMN( geom_id, surf_indx, r, s, t )



    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: r double R (0 - 1) volume coordinate
    :param [in]: s double S (0 - 1) volume coordinate
    :param [in]: t double T (0 - 1) volume coordinate
    :param [out]: l_out double L (0 - 1) linear volume coordinate
    :param [out]: m_out double M (0 - 1) linear volume coordinate
    :param [out]: n_out double N (0 - 1) linear volume coordinate
    """
    return _vsp_g.ConvertRSTtoLMN(geom_id, surf_indx, r, s, t)

def ConvertRtoL(geom_id, surf_indx, r):
    r"""
    Convert R volumetric coordinate to L coordinate.


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0

        r = 0.12

        l_out = ConvertRtoL( geom_id, surf_indx, r )



    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: r double R (0 - 1) volume coordinate
    :param [out]: l_out double L (0 - 1) linear volume coordinate
    """
    return _vsp_g.ConvertRtoL(geom_id, surf_indx, r)

def ConvertLMNtoRST(geom_id, surf_indx, l, m, n):
    r"""
    Convert LMN volumetric coordinates to RST coordinates.


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0

        l = 0.12
        m = 0.34
        n = 0.56

        r_out, s_out, t_out = ConvertLMNtoRST( geom_id, surf_indx, l, m, n )



    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: l double L (0 - 1) linear volume coordinate
    :param [in]: m double M (0 - 1) linear volume coordinate
    :param [in]: n double N (0 - 1) linear volume coordinate
    :param [out]: r_out double R (0 - 1) volume coordinate
    :param [out]: s_out double S (0 - 1) volume coordinate
    :param [out]: t_out double T (0 - 1) volume coordinate
    """
    return _vsp_g.ConvertLMNtoRST(geom_id, surf_indx, l, m, n)

def ConvertLtoR(geom_id, surf_indx, l):
    r"""
    Convert L volumetric coordinate to R coordinate.


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0

        l = 0.12

        r_out = ConvertLtoR( geom_id, surf_indx, l )



    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: l double L (0 - 1) volume coordinate
    :param [out]: r_out double R (0 - 1) linear volume coordinate
    """
    return _vsp_g.ConvertLtoR(geom_id, surf_indx, l)

def ConvertUtoEta(geom_id, u):
    r"""
    Convert U coordinate to eta wing coordinate.


    .. code-block:: python

        # Add Wing Geom
        geom_id = AddGeom( "WING", "" )

        surf_indx = 0

        u = 0.25

        eta_out = ConvertUtoEta( geom_id, u )



    :param [in]: geom_id string Parent Geom ID
    :param [in]: u double U (0 - 1) surface coordinate
    :param [out]: eta_out double Eta (0 - 1) wing spanwise coordinate
    """
    return _vsp_g.ConvertUtoEta(geom_id, u)

def ConvertEtatoU(geom_id, eta):
    r"""
    Convert eta wing coordinate to u coordinate.


    .. code-block:: python

        # Add Wing Geom
        geom_id = AddGeom( "WING", "" )

        surf_indx = 0

        eta= 0.25

        u = ConvertEtatoU( geom_id, eta )



    :param [in]: geom_id string Parent Geom ID
    :param [in]: eta double Eta (0 - 1) wing spanwise coordinate
    :param [out]: u_out double U (0 - 1) surface coordinate
    """
    return _vsp_g.ConvertEtatoU(geom_id, eta)

def CompVecPnt01(geom_id, surf_indx, u_in_vec, w_in_vec):
    r"""
    Determine 3D coordinate for each surface coordinate point in the input arrays


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        n = 5

        uvec = [0]*n
        wvec = [0]*n

        for i in range(n):

            uvec[i] = (i+1)*1.0/(n+1)

            wvec[i] = (n-i)*1.0/(n+1)

        ptvec = CompVecPnt01( geom_id, 0, uvec, wvec )


    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: u_in_vec vector<double> Input vector of U (0 - 1) surface coordinates
    :param [in]: w_in_vec vector<double> Input vector of W (0 - 1) surface coordinates
    :rtype: std::vector< vec3d,std::allocator< vec3d > >
    :return: vector<vec3d> Vector of 3D coordinate points
    """
    return _vsp_g.CompVecPnt01(geom_id, surf_indx, u_in_vec, w_in_vec)

def CompVecDegenPnt01(geom_id, surf_indx, degen_type, u_in_vec, w_in_vec):
    r"""
    Determine 3D coordinate for each degen surface coordinate point in the input arrays


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        n = 5

        uvec = [0]*n
        wvec = [0]*n

        for i in range(n):

            uvec[i] = (i+1)*1.0/(n+1)

            wvec[i] = (n-i)*1.0/(n+1)

        ptvec = CompVecDegenPnt01( geom_id, 0, 0, uvec, wvec )


    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: degen_type int Type of degen surface (0-S, 1-V, 2-H, 3-C)
    :param [in]: u_in_vec vector<double> Input vector of U (0 - 1) surface coordinates
    :param [in]: w_in_vec vector<double> Input vector of W (0 - 1) surface coordinates
    :rtype: std::vector< vec3d,std::allocator< vec3d > >
    :return: vector<vec3d> Vector of 3D coordinate points
    """
    return _vsp_g.CompVecDegenPnt01(geom_id, surf_indx, degen_type, u_in_vec, w_in_vec)

def CompVecNorm01(geom_id, surf_indx, us, ws):
    r"""
    Determine the normal vector on a surface for each surface coordinate point in the input arrays


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        n = 5

        uvec = [0]*n
        wvec = [0]*n

        for i in range(n):

            uvec[i] = (i+1)*1.0/(n+1)

            wvec[i] = (n-i)*1.0/(n+1)

        normvec = CompVecNorm01( geom_id, 0, uvec, wvec )


    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: us vector<double> Input vector of U (0 - 1) surface coordinates
    :param [in]: ws vector<double> Input vector of W (0 - 1) surface coordinates
    :rtype: std::vector< vec3d,std::allocator< vec3d > >
    :return: vector<vec3d> Vector of 3D normal vectors
    """
    return _vsp_g.CompVecNorm01(geom_id, surf_indx, us, ws)

def CompVecCurvature01(geom_id, surf_indx, us, ws):
    r"""
    Determine the curvature of a specified surface at each surface coordinate point in the input arrays


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        n = 5

        uvec = [0]*n
        wvec = [0]*n

        for i in range(n):

            uvec[i] = (i+1)*1.0/(n+1)

            wvec[i] = (n-i)*1.0/(n+1)



        k1vec, k2vec, kavec, kgvec = CompVecCurvature01( geom_id, 0, uvec, wvec )


    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: us vector<double> Input vector of U (0 - 1) surface coordinates
    :param [in]: ws vector<double> Input vector of W (0 - 1) surface coordinates
    :param [out]: k1_out_vec vector<double> Output vector of maximum principal curvatures
    :param [out]: k2_out_vec vector<double> Output vector of minimum principal curvatures
    :param [out]: ka_out_vec vector<double> Output vector of mean curvatures
    :param [out]: kg_out_vec vector<double> Output vector of Gaussian curvatures
    """
    return _vsp_g.CompVecCurvature01(geom_id, surf_indx, us, ws)

def ProjVecPnt01(geom_id, surf_indx, pts):
    r"""
    Determine the nearest surface coordinates for an input array of 3D coordinate points and calculate the distance between each
    3D point and the closest point of the surface.


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        n = 5

        uvec = [0]*n
        wvec = [0]*n

        for i in range(n):

            uvec[i] = (i+1)*1.0/(n+1)

            wvec[i] = (n-i)*1.0/(n+1)

        ptvec = CompVecPnt01( geom_id, 0, uvec, wvec )

        normvec = CompVecNorm01( geom_id, 0, uvec, wvec )

        for i in range(n):

            ptvec[i].set_xyz( ptvec[i].x() + normvec[i].x(), ptvec[i].y() + normvec[i].y(), ptvec[i].z() + normvec[i].z() )

        uoutv, woutv, doutv = ProjVecPnt01( geom_id, 0, ptvec )


    See also: ProjVecPnt01Guess
    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: pts vector<vec3d> Input vector of 3D coordinate points
    :param [out]: u_out_vec vector<double> Output vector of the closest U (0 - 1) surface coordinate for each 3D input point
    :param [out]: w_out_vec vector<double> Output vector of the closest W (0 - 1) surface coordinate for each 3D input point
    :param [out]: d_out_vec vector<double> Output vector of distances for each 3D point and the closest point of the surface
    """
    return _vsp_g.ProjVecPnt01(geom_id, surf_indx, pts)

def ProjVecPnt01Guess(geom_id, surf_indx, pts, u0s, w0s):
    r"""
    Determine the nearest surface coordinates for an input array of 3D coordinate points and calculate the distance between each
    3D point and the closest point of the surface. This function takes an input array of surface coordinate guesses for each 3D
    coordinate, offering a potential decrease in computation time compared to ProjVecPnt01.


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        n = 5

        uvec = [0]*n
        wvec = [0]*n

        for i in range(n):

            uvec[i] = (i+1)*1.0/(n+1)

            wvec[i] = (n-i)*1.0/(n+1)

        ptvec = CompVecPnt01( geom_id, 0, uvec, wvec )

        normvec = CompVecNorm01( geom_id, 0, uvec, wvec )

        for i in range(n):

            ptvec[i].set_xyz( ptvec[i].x() + normvec[i].x(), ptvec[i].y() + normvec[i].y(), ptvec[i].z() + normvec[i].z() )

        u0v = [0]*n
        w0v = [0]*n

        for i in range(n):

            u0v[i] = uvec[i] + 0.01234

            w0v[i] = wvec[i] - 0.05678

        uoutv, woutv, doutv = ProjVecPnt01Guess( geom_id, 0, ptvec, u0v,  w0v )


    See also: ProjVecPnt01,
    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: pts vector<vec3d> Input vector of 3D coordinate points
    :param [in]: u0s vector<double> Input vector of U (0 - 1) surface coordinate guesses
    :param [in]: w0s vector<double> Input vector of W (0 - 1) surface coordinate guesses
    :param [out]: u_out_vec vector<double> Output vector of the closest U (0 - 1) surface coordinate for each 3D input point
    :param [out]: w_out_vec vector<double> Output vector of the closest W (0 - 1) surface coordinate for each 3D input point
    :param [out]: d_out_vec vector<double> Output array of distances for each 3D point and the closest point of the surface
    """
    return _vsp_g.ProjVecPnt01Guess(geom_id, surf_indx, pts, u0s, w0s)

def AxisProjVecPnt01(geom_id, surf_indx, iaxis, pts):
    r"""
    Project an input array of 3D coordinate points onto a surface along a specified axis.  If the axis-aligned ray from the point intersects the surface multiple times, the nearest intersection is returned.  If the axis-aligned ray from the point does not intersect the surface, the original point is returned and -1 is returned in the other output parameters.




    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )
        surf_indx = 0

        n = 5

        uvec = [0]*n
        wvec = [0]*n

        for i in range(n):

            uvec[i] = (i+1)*1.0/(n+1)

            wvec[i] = (n-i)*1.0/(n+1)

        ptvec = CompVecPnt01( geom_id, surf_indx, uvec, wvec )

        for i in range(n):

            ptvec[i].offset_y( -5.0 )

        uoutv, woutv, doutv = AxisProjVecPnt01( geom_id, surf_indx, Y_DIR, ptvec )

        # Some of these outputs are expected to be non-zero because the projected point is on the opposite side of
        # the pod from the originally computed point.  I.e. there were multiple solutions and the original point
        # is not the closest intersection point.  We could offset those points in the +Y direction instead of -Y.
        for i in range(n):

            print( i, False )
            print( "U delta ", False )
            print( uvec[i] - uoutv[i], False )
            print( "W delta ", False )
            print( wvec[i] - woutv[i] )



    See also: AxisProjPnt01, AxisProjPnt01Guess, AxisProjPnt01I, AxisProjVecPnt01Guess
    :param [in]: geom_id string Geom ID
    :param [in]: surf_indx int Main surface index from the Geom
    :param [in]: iaxis int Axis direction to project point along (X_DIR, Y_DIR, or Z_DIR)
    :param [in]: pts vector<vec3d> Input vector of 3D coordinate points
    :param [out]: u_out_vec vector<double> Output vector of the closest U (0 - 1) surface coordinate for each 3D input point
    :param [out]: w_out_vec vector<double> Output vector of the closest W (0 - 1) surface coordinate for each 3D input point
    :param [out]: d_out_vec vector<double> Output vector of axis distances for each 3D point and the projected point of the surface
    """
    return _vsp_g.AxisProjVecPnt01(geom_id, surf_indx, iaxis, pts)

def AxisProjVecPnt01Guess(geom_id, surf_indx, iaxis, pts, u0s, w0s):
    r"""
    Project an input array of 3D coordinate points onto a surface along a specified axis given initial guess arrays of surface parameter.  If the axis-aligned ray from the point intersects the surface multiple times, the nearest intersection is returned.  If the axis-aligned ray from the point does not intersect the surface, the original point is returned and -1 is returned in the other output parameters.  The surface parameter guess should allow this call to be faster than calling AxisProjVecPnt01 without a guess.


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )
        surf_indx = 0

        n = 5

        uvec = [0]*n
        wvec = [0]*n

        for i in range(n):

            uvec[i] = (i+1)*1.0/(n+1)

            wvec[i] = (n-i)*1.0/(n+1)

        ptvec = CompVecPnt01( geom_id, surf_indx, uvec, wvec )

        for i in range(n):

            ptvec[i].offset_y( -5.0 )

        u0v = [0]*n
        w0v = [0]*n

        for i in range(n):

            u0v[i] = uvec[i] + 0.01234
            w0v[i] = wvec[i] - 0.05678

        uoutv, woutv, doutv = AxisProjVecPnt01Guess( geom_id, surf_indx, Y_DIR, ptvec, u0v,  w0v )

        for i in range(n):

            print( i, False )
            print( "U delta ", False )
            print( uvec[i] - uoutv[i], False )
            print( "W delta ", False )
            print( wvec[i] - woutv[i] )



    See also: AxisProjPnt01, AxisProjPnt01Guess, AxisProjPnt01I, AxisProjVecPnt01
    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: iaxis int Axis direction to project point along (X_DIR, Y_DIR, or Z_DIR)
    :param [in]: pts vector<vec3d> Input vector of 3D coordinate points
    :param [in]: u0s vector<double> Input vector of U (0 - 1) surface coordinate guesses
    :param [in]: w0s vector<double> Input vector of W (0 - 1) surface coordinate guesses
    :param [out]: u_out_vec vector<double> Output vector of the closest U (0 - 1) surface coordinate for each 3D input point
    :param [out]: w_out_vec vector<double> Output vector of the closest W (0 - 1) surface coordinate for each 3D input point
    :param [out]: d_out_vec vector<double> Output vector of axis distances for each 3D point and the projected point of the surface
    """
    return _vsp_g.AxisProjVecPnt01Guess(geom_id, surf_indx, iaxis, pts, u0s, w0s)

def VecInsideSurf(geom_id, surf_indx, pts):
    r"""
    Test whether a vector of points are inside a specified surface.



    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0

        n = 5

        rvec = [0]*n
        svec = [0]*n
        tvec = [0]*n

        for i in range(n):

            rvec[i] = (i+1)*1.0/(n+1)

            svec[i] = (n-i)*1.0/(n+1)

            tvec[i] = (i+1)*1.0/(n+1)

        ptvec = CompVecPntRST( geom_id, 0, rvec, svec, tvec )


        res = VecInsideSurf( geom_id, surf_indx, ptvec )



    See also: VecInsideSurf
    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: pts vector<vec3d> Input vector of 3D coordinate points
    :rtype: std::vector< bool,std::allocator< bool > >
    :return: vector <bool> Boolean vector for each point.  True if it is inside the surface, false otherwise.
    """
    return _vsp_g.VecInsideSurf(geom_id, surf_indx, pts)

def CompVecPntRST(geom_id, surf_indx, r_in_vec, s_in_vec, t_in_vec):
    r"""
    Determine 3D coordinate for each volume coordinate point in the input arrays


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        n = 5

        rvec = [0]*n
        svec = [0]*n
        tvec = [0]*n

        for i in range(n):

            rvec[i] = (i+1)*1.0/(n+1)

            svec[i] = (n-i)*1.0/(n+1)

            tvec[i] = (i+1)*1.0/(n+1)

        ptvec = CompVecPntRST( geom_id, 0, rvec, svec, tvec )


    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: r_in_vec vector<double> Input vector of R (0 - 1.0) volume coordinates
    :param [in]: s_in_vec vector<double> Input vector of S (0 - 1.0) volume coordinates
    :param [in]: t_in_vec vector<double> Input vector of T (0 - 1.0) volume coordinates
    :rtype: std::vector< vec3d,std::allocator< vec3d > >
    :return: vector<vec3d> Vector of 3D coordinate points
    """
    return _vsp_g.CompVecPntRST(geom_id, surf_indx, r_in_vec, s_in_vec, t_in_vec)

def FindRSTVec(geom_id, surf_indx, pts):
    r"""
    Determine the nearest volume coordinates for an input array of 3D coordinate points and calculate the distance between each
    3D point and the found point in the volume.


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        n = 5

        rvec = [0]*n
        svec = [0]*n
        tvec = [0]*n

        for i in range(n):

            rvec[i] = (i+1)*1.0/(n+1)

            svec[i] = (n-i)*1.0/(n+1)

            tvec[i] = (i+1)*1.0/(n+1)

        ptvec = CompVecPntRST( geom_id, 0, rvec, svec, tvec )



        routv, soutv, toutv, doutv = FindRSTVec( geom_id, 0, ptvec )


    See also: FindRSTVecGuess
    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: pts vector<vec3d> Input vector of 3D coordinate points
    :param [out]: r_out_vec vector<double> Output vector of the closest R (0 - 1.0) volume coordinate for each 3D input point
    :param [out]: s_out_vec vector<double> Output vector of the closest S (0 - 1.0) volume coordinate for each 3D input point
    :param [out]: t_out_vec vector<double> Output vector of the closest T (0 - 1.0) volume coordinate for each 3D input point
    :param [out]: d_out_vec vector<double> Output vector of distances for each 3D point and the closest point of the volume
    """
    return _vsp_g.FindRSTVec(geom_id, surf_indx, pts)

def FindRSTVecGuess(geom_id, surf_indx, pts, r0s, s0s, t0s):
    r"""
    Determine the nearest volume coordinates for an input array of 3D coordinate points and calculate the distance between each
    3D point and the closest point of the volume. This function takes an input array of volume coordinate guesses for each 3D
    coordinate, offering a potential decrease in computation time compared to FindRSTVec.


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        n = 5

        rvec = [0]*n
        svec = [0]*n
        tvec = [0]*n

        for i in range(n):

            rvec[i] = (i+1)*1.0/(n+1)

            svec[i] = (n-i)*1.0/(n+1)

            tvec[i] = (i+1)*1.0/(n+1)

        ptvec = CompVecPntRST( geom_id, 0, rvec, svec, tvec )

        for i in range(n):

            ptvec[i].set_xyz(ptvec[i].x() * 0.9, ptvec[i].y() * 0.9, ptvec[i].z() * 0.9)

         routv, soutv, toutv, doutv = FindRSTVecGuess( geom_id, 0, ptvec, rvec, svec, tvec )


    See also: FindRSTVec,
    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: pts vector<vec3d> Input vector of 3D coordinate points
    :param [in]: r0s vector<double> Input vector of U (0 - 1.0) volume coordinate guesses
    :param [in]: s0s vector<double> Input vector of S (0 - 1.0) volume coordinate guesses
    :param [in]: t0s vector<double> Input vector of T (0 - 1.0) volume coordinate guesses
    :param [out]: r_out_vec vector<double> Output vector of the closest R (0 - 1.0) volume coordinate for each 3D input point
    :param [out]: s_out_vec vector<double> Output vector of the closest S (0 - 1.0) volume coordinate for each 3D input point
    :param [out]: t_out_vec vector<double> Output vector of the closest T (0 - 1.0) volume coordinate for each 3D input point
    :param [out]: d_out_vec vector<double> Output vector of distances for each 3D point and the closest point of the volume
    """
    return _vsp_g.FindRSTVecGuess(geom_id, surf_indx, pts, r0s, s0s, t0s)

def ConvertRSTtoLMNVec(geom_id, surf_indx, r_vec, s_vec, t_vec):
    r"""
    Convert vector of RST volumetric coordinates to LMN coordinates.



    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        n = 5

        rvec = [0]*n
        svec = [0]*n
        tvec = [0]*n

        for i in range(n):

            rvec[i] = (i+1)*1.0/(n+1)
            svec[i] = (n-i)*1.0/(n+1)
            tvec[i] = (i+1)*1.0/(n+1)



        lvec, mvec, nvec = ConvertRSTtoLMNVec( geom_id, 0, rvec, svec, tvec )



    See also: ConvertLMNtoRSTVec, ConvertRSTtoLMN, ConvertLMNtoRST
    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: r_vec vector<double> Input vector of R (0 - 1) volumetric coordinate
    :param [in]: s_vec vector<double> Input vector of S (0 - 1) volumetric coordinate
    :param [in]: t_vec vector<double> Input vector of T (0 - 1) volumetric coordinate
    :param [out]: l_out_vec vector<double> Output vector of L (0 - 1) linear volumetric coordinate
    :param [out]: m_out_vec vector<double> Output vector of M (0 - 1) linear volumetric coordinate
    :param [out]: n_out_vec vector<double> Output vector of N (0 - 1) linear volumetric coordinate
    """
    return _vsp_g.ConvertRSTtoLMNVec(geom_id, surf_indx, r_vec, s_vec, t_vec)

def ConvertLMNtoRSTVec(geom_id, surf_indx, l_vec, m_vec, n_vec):
    r"""
    Convert vector of LMN volumetric coordinates to RST coordinates.



    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        n = 5

        lvec = [0]*n
        mvec = [0]*n
        nvec = [0]*n

        for i in range(n):

            lvec[i] = (i+1)*1.0/(n+1)
            mvec[i] = (n-i)*1.0/(n+1)
            nvec[i] = (i+1)*1.0/(n+1)

        rvec, svec, tvec = ConvertLMNtoRSTVec( geom_id, 0, lvec, mvec, nvec )



    See also: ConvertRSTtoLMNVec, ConvertRSTtoLMN, ConvertLMNtoRST
    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [in]: l_vec vector<double> Input vector of L (0 - 1) linear volumetric coordinate
    :param [in]: m_vec vector<double> Input vector of M (0 - 1) linear volumetric coordinate
    :param [in]: n_vec vector<double> Input vector of N (0 - 1) linear volumetric coordinate
    :param [out]: r_out_vec vector<double> Output vector of R (0 - 1) volumetric coordinate
    :param [out]: s_out_vec vector<double> Output vector of S (0 - 1) volumetric coordinate
    :param [out]: t_out_vec vector<double> Output vector of T (0 - 1) volumetric coordinate

    """
    return _vsp_g.ConvertLMNtoRSTVec(geom_id, surf_indx, l_vec, m_vec, n_vec)

def GetUWTess01(geom_id, surf_indx):
    r"""
    Get the surface coordinate point of each intersection of the tessellated wireframe for a particular surface


    .. code-block:: python

        # Add Pod Geom
        geom_id = AddGeom( "POD", "" )

        surf_indx = 0

        utess, wtess = GetUWTess01( geom_id, surf_indx )


    :param [in]: geom_id string Parent Geom ID
    :param [in]: surf_indx int Main surface index from the parent Geom
    :param [out]: u_out_vec vector<double> Output vector of U (0 - 1) surface coordinates
    :param [out]: w_out_vec vector<double> Output vector of W (0 - 1) surface coordinates
    """
    return _vsp_g.GetUWTess01(geom_id, surf_indx)

def AddRuler(startgeomid, startsurfindx, startu, startw, endgeomid, endsurfindx, endu, endw, name):
    r"""
    Create a new Ruler and add it to the Measure Tool


    .. code-block:: python

        pid1 = AddGeom( "POD", "" )

        SetParmVal( pid1, "Y_Rel_Location", "XForm", 2.0 )

        pid2 = AddGeom( "POD", "" )

        SetParmVal( pid2, "Z_Rel_Location", "XForm", 4.0 )

        rid = AddRuler( pid1, 1, 0.2, 0.3, pid2, 0, 0.2, 0.3, "Ruler 1" )

        SetParmVal( FindParm( rid, "X_Offset", "Measure" ), 6.0 )


    :param [in]: startgeomid string Start parent Geom ID
    :param [in]: startsurfindx int Main surface index from the staring parent Geom
    :param [in]: startu double Surface u (0 - 1) start coordinate
    :param [in]: startw double Surface w (0 - 1) start coordinate
    :param [in]: endgeomid string End parent Geom ID
    :param [in]: endsurfindx int Main surface index on the end parent Geom
    :param [in]: endu double Surface u (0 - 1) end coordinate
    :param [in]: endw double Surface w (0 - 1) end coordinate
    :param [in]: name string Ruler name
    :rtype: string
    :return: string Ruler ID
    """
    return _vsp_g.AddRuler(startgeomid, startsurfindx, startu, startw, endgeomid, endsurfindx, endu, endw, name)

def GetAllRulers():
    r"""
    Get an array of all Ruler IDs from the Measure Tool


    .. code-block:: python

        pid1 = AddGeom( "POD", "" )

        SetParmVal( pid1, "Y_Rel_Location", "XForm", 2.0 )

        pid2 = AddGeom( "POD", "" )

        SetParmVal( pid2, "Z_Rel_Location", "XForm", 4.0 )

        rid1 = AddRuler( pid1, 1, 0.2, 0.3, pid2, 0, 0.2, 0.3, "Ruler 1" )

        rid2 = AddRuler( pid1, 0, 0.4, 0.6, pid1, 1, 0.8, 0.9, "Ruler 2" )

        ruler_array = GetAllRulers()

        print("Two Rulers")

        for n in range(len(ruler_array)):

            print( ruler_array[n] )


    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Vector of Ruler IDs
    """
    return _vsp_g.GetAllRulers()

def DelRuler(id):
    r"""
    Delete a particular Ruler from the Measure Tool


    .. code-block:: python

        pid1 = AddGeom( "POD", "" )

        SetParmVal( pid1, "Y_Rel_Location", "XForm", 2.0 )

        pid2 = AddGeom( "POD", "" )

        SetParmVal( pid2, "Z_Rel_Location", "XForm", 4.0 )

        rid1 = AddRuler( pid1, 1, 0.2, 0.3, pid2, 0, 0.2, 0.3, "Ruler 1" )

        rid2 = AddRuler( pid1, 0, 0.4, 0.6, pid1, 1, 0.8, 0.9, "Ruler 2" )

        ruler_array = GetAllRulers()

        DelRuler( ruler_array[0] )


    :param [in]: id string Ruler ID
    """
    return _vsp_g.DelRuler(id)

def DeleteAllRulers():
    r"""
    Delete all Rulers from the Measure Tool


    .. code-block:: python

        pid1 = AddGeom( "POD", "" )

        SetParmVal( pid1, "Y_Rel_Location", "XForm", 2.0 )

        pid2 = AddGeom( "POD", "" )

        SetParmVal( pid2, "Z_Rel_Location", "XForm", 4.0 )

        rid1 = AddRuler( pid1, 1, 0.2, 0.3, pid2, 0, 0.2, 0.3, "Ruler 1" )

        rid2 = AddRuler( pid1, 0, 0.4, 0.6, pid1, 1, 0.8, 0.9, "Ruler 2" )

        DeleteAllRulers()


    """
    return _vsp_g.DeleteAllRulers()

def AddProbe(geomid, surfindx, u, w, name):
    r"""
    Create a new Probe and add it to the Measure Tool


    .. code-block:: python

        pid1 = AddGeom( "POD", "" )

        SetParmVal( pid1, "Y_Rel_Location", "XForm", 2.0 )

        probe_id = AddProbe( pid1, 0, 0.5, 0.8, "Probe 1" )

        SetParmVal( FindParm( probe_id, "Len", "Measure" ), 3.0 )


    :param [in]: geomid string Parent Geom ID
    :param [in]: surfindx int Main surface index from the parent Geom
    :param [in]: u double Surface u (0 - 1) coordinate
    :param [in]: w double Surface w (0 - 1) coordinate
    :param [in]: name string Probe name
    :rtype: string
    :return: string Probe ID
    """
    return _vsp_g.AddProbe(geomid, surfindx, u, w, name)

def GetAllProbes():
    r"""
    Get an array of all Probe IDs from the Measure Tool


    .. code-block:: python

        pid1 = AddGeom( "POD", "" )

        SetParmVal( pid1, "Y_Rel_Location", "XForm", 2.0 )

        probe_id = AddProbe( pid1, 0, 0.5, 0.8, "Probe 1" )

        probe_array = GetAllProbes()

        print( "One Probe: ", False )

        print( probe_array[0] )


    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of Probe IDs
    """
    return _vsp_g.GetAllProbes()

def DelProbe(id):
    r"""
    Delete a specific Probe from the Measure Tool


    .. code-block:: python

        pid1 = AddGeom( "POD", "" )

        SetParmVal( pid1, "Y_Rel_Location", "XForm", 2.0 )

        probe_id_1 = AddProbe( pid1, 0, 0.5, 0.8, "Probe 1" )
        probe_id_2 = AddProbe( pid1, 0, 0.2, 0.3, "Probe 2" )

        DelProbe( probe_id_1 )

        probe_array = GetAllProbes()

        if  len(probe_array) != 1 : print( "Error: DelProbe" )


    :param [in]: id string Probe ID
    """
    return _vsp_g.DelProbe(id)

def DeleteAllProbes():
    r"""
    Delete all Probes from the Measure Tool


    .. code-block:: python

        pid1 = AddGeom( "POD", "" )

        SetParmVal( pid1, "Y_Rel_Location", "XForm", 2.0 )

        probe_id_1 = AddProbe( pid1, 0, 0.5, 0.8, "Probe 1" )
        probe_id_2 = AddProbe( pid1, 0, 0.2, 0.3, "Probe 2" )

        DeleteAllProbes()

        probe_array = GetAllProbes()

        if  len(probe_array) != 0 : print( "Error: DeleteAllProbes" )


    """
    return _vsp_g.DeleteAllProbes()

def GetAdvLinkNames():
    r"""
    Get an array of all advanced link names


    .. code-block:: python

        link_array = GetAdvLinkNames()

        for n in range(len(link_array) ):

            print( link_array[n] )


    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of advanced link names
    """
    return _vsp_g.GetAdvLinkNames()

def GetLinkIndex(name):
    r"""
    Find the index of a specific advanced link.


    .. code-block:: python


        pod = AddGeom( "POD", "" )
        length = FindParm( pod, "Length", "Design" )
        x_pos = GetParm( pod, "X_Rel_Location", "XForm" )

        AddAdvLink( "ExampleLink" )
        indx = GetLinkIndex( "ExampleLink" )
        AddAdvLinkInput( indx, length, "len" )
        AddAdvLinkOutput( indx, x_pos, "x" )

        SetAdvLinkCode( indx, "x = 10.0 - len;" )

        BuildAdvLinkScript( indx )



    :param [in]: name string Name for advanced link
    :rtype: int
    :return: int index for advanced link

    """
    return _vsp_g.GetLinkIndex(name)

def DelAdvLink(index):
    r"""
    Delete an advanced link specified by index


    .. code-block:: python


        pod = AddGeom( "POD", "" )
        length = FindParm( pod, "Length", "Design" )
        x_pos = GetParm( pod, "X_Rel_Location", "XForm" )

        AddAdvLink( "ExampleLink" )
        indx = GetLinkIndex( "ExampleLink" )
        AddAdvLinkInput( indx, length, "len" )
        AddAdvLinkOutput( indx, x_pos, "x" )

        SetAdvLinkCode( indx, "x = 10.0 - len;" )

        BuildAdvLinkScript( indx )

        DelAdvLink( indx )

        link_array = GetAdvLinkNames()

        # Should print nothing.
        for n in range(len(link_array) ):

            print( link_array[n] )



    :param [in]: index int Index for advanced link
    """
    return _vsp_g.DelAdvLink(index)

def DelAllAdvLinks():
    r"""
    Delete all advanced links


    .. code-block:: python


        pod = AddGeom( "POD", "" )
        length = FindParm( pod, "Length", "Design" )
        x_pos = GetParm( pod, "X_Rel_Location", "XForm" )

        AddAdvLink( "ExampleLink" )
        indx = GetLinkIndex( "ExampleLink" )
        AddAdvLinkInput( indx, length, "len" )
        AddAdvLinkOutput( indx, x_pos, "x" )

        SetAdvLinkCode( indx, "x = 10.0 - len;" )

        BuildAdvLinkScript( indx )

        DelAllAdvLinks()

        link_array = GetAdvLinkNames()

        # Should print nothing.
        for n in range( len(link_array) ):

            print( link_array[n] )



    """
    return _vsp_g.DelAllAdvLinks()

def AddAdvLink(name):
    r"""
    Add an advanced link


    .. code-block:: python


        pod = AddGeom( "POD", "" )
        length = FindParm( pod, "Length", "Design" )
        x_pos = GetParm( pod, "X_Rel_Location", "XForm" )

        AddAdvLink( "ExampleLink" )
        indx = GetLinkIndex( "ExampleLink" )
        AddAdvLinkInput( indx, length, "len" )
        AddAdvLinkOutput( indx, x_pos, "x" )

        SetAdvLinkCode( indx, "x = 10.0 - len;" )

        BuildAdvLinkScript( indx )



    :param [in]: name string Name for advanced link
    """
    return _vsp_g.AddAdvLink(name)

def AddAdvLinkInput(index, parm_id, var_name):
    r"""
    Add an input variable to an advanced link


    .. code-block:: python


        pod = AddGeom( "POD", "" )
        length = FindParm( pod, "Length", "Design" )
        x_pos = GetParm( pod, "X_Rel_Location", "XForm" )

        AddAdvLink( "ExampleLink" )
        indx = GetLinkIndex( "ExampleLink" )
        AddAdvLinkInput( indx, length, "len" )
        AddAdvLinkOutput( indx, x_pos, "x" )

        SetAdvLinkCode( indx, "x = 10.0 - len;" )

        BuildAdvLinkScript( indx )



    :param [in]: index int Advanced link index
    :param [in]: parm_id string Parameter ID for advanced link input variable
    :param [in]: var_name string Name for advanced link input variable
    """
    return _vsp_g.AddAdvLinkInput(index, parm_id, var_name)

def AddAdvLinkOutput(index, parm_id, var_name):
    r"""
    Add an output variable to an advanced link


    .. code-block:: python


        pod = AddGeom( "POD", "" )
        length = FindParm( pod, "Length", "Design" )
        x_pos = GetParm( pod, "X_Rel_Location", "XForm" )

        AddAdvLink( "ExampleLink" )
        indx = GetLinkIndex( "ExampleLink" )
        AddAdvLinkInput( indx, length, "len" )
        AddAdvLinkOutput( indx, x_pos, "x" )

        SetAdvLinkCode( indx, "x = 10.0 - len;" )

        BuildAdvLinkScript( indx )



    :param [in]: index int Advanced link index
    :param [in]: parm_id string Parameter ID for advanced link output variable
    :param [in]: var_name string Name for advanced link output variable
    """
    return _vsp_g.AddAdvLinkOutput(index, parm_id, var_name)

def DelAdvLinkInput(index, var_name):
    r"""
    Delete an input variable from an advanced link


    .. code-block:: python


        pod = AddGeom( "POD", "" )
        length = FindParm( pod, "Length", "Design" )
        x_pos = GetParm( pod, "X_Rel_Location", "XForm" )
        y_pos = GetParm( pod, "Y_Rel_Location", "XForm" )

        AddAdvLink( "ExampleLink" )
        indx = GetLinkIndex( "ExampleLink" )
        AddAdvLinkInput( indx, length, "len" )
        AddAdvLinkOutput( indx, x_pos, "x" )
        AddAdvLinkInput( indx, y_pos, "y" )

        SetAdvLinkCode( indx, "x = 10.0 - len;" )

        BuildAdvLinkScript( indx )

        DelAdvLinkInput( indx, "y" )

        BuildAdvLinkScript( indx )



    :param [in]: index int Advanced link index
    :param [in]: var_name string Name for advanced link input variable to delete
    """
    return _vsp_g.DelAdvLinkInput(index, var_name)

def DelAdvLinkOutput(index, var_name):
    r"""
    Delete an output variable from an advanced link


    .. code-block:: python


        pod = AddGeom( "POD", "" )
        length = FindParm( pod, "Length", "Design" )
        x_pos = GetParm( pod, "X_Rel_Location", "XForm" )
        y_pos = GetParm( pod, "Y_Rel_Location", "XForm" )

        AddAdvLink( "ExampleLink" )
        indx = GetLinkIndex( "ExampleLink" )
        AddAdvLinkInput( indx, length, "len" )
        AddAdvLinkOutput( indx, x_pos, "x" )
        AddAdvLinkOutput( indx, y_pos, "y" )

        SetAdvLinkCode( indx, "x = 10.0 - len;" )

        BuildAdvLinkScript( indx )

        DelAdvLinkOutput( indx, "y" )

        BuildAdvLinkScript( indx )



    :param [in]: index int Advanced link index
    :param [in]: var_name string Name for advanced link output variable to delete
    """
    return _vsp_g.DelAdvLinkOutput(index, var_name)

def GetAdvLinkInputNames(index):
    r"""
    Get the name of all the inputs to a specified advanced link index


    .. code-block:: python


        pod = AddGeom( "POD", "" )
        length = FindParm( pod, "Length", "Design" )
        x_pos = GetParm( pod, "X_Rel_Location", "XForm" )

        AddAdvLink( "ExampleLink" )
        indx = GetLinkIndex( "ExampleLink" )
        AddAdvLinkInput( indx, length, "len" )
        AddAdvLinkOutput( indx, x_pos, "x" )

        SetAdvLinkCode( indx, "x = 10.0 - len;" )

        BuildAdvLinkScript( indx )

        name_array = GetAdvLinkInputNames( indx )

        for n in range(len(name_array) ):

            print( name_array[n] )



    :param [in]: index int Advanced link index
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of advanced link input names
    """
    return _vsp_g.GetAdvLinkInputNames(index)

def GetAdvLinkInputParms(index):
    r"""
    Get the Parm IDs of all the inputs to a specified advanced link index


    .. code-block:: python


        pod = AddGeom( "POD", "" )
        length = FindParm( pod, "Length", "Design" )
        x_pos = GetParm( pod, "X_Rel_Location", "XForm" )

        AddAdvLink( "ExampleLink" )
        indx = GetLinkIndex( "ExampleLink" )
        AddAdvLinkInput( indx, length, "len" )
        AddAdvLinkOutput( indx, x_pos, "x" )

        SetAdvLinkCode( indx, "x = 10.0 - len;" )

        BuildAdvLinkScript( indx )

        parm_array = GetAdvLinkInputParms( indx )

        for n in range( len(parm_array) ):

            print( parm_array[n] )



    :param [in]: index int Advanced link index
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of advanced link input Parm IDs
    """
    return _vsp_g.GetAdvLinkInputParms(index)

def GetAdvLinkOutputNames(index):
    r"""
    Get the Parm IDs of all the outputs to a specified advanced link index


    .. code-block:: python


        pod = AddGeom( "POD", "" )
        length = FindParm( pod, "Length", "Design" )
        x_pos = GetParm( pod, "X_Rel_Location", "XForm" )

        AddAdvLink( "ExampleLink" )
        indx = GetLinkIndex( "ExampleLink" )
        AddAdvLinkInput( indx, length, "len" )
        AddAdvLinkOutput( indx, x_pos, "x" )

        SetAdvLinkCode( indx, "x = 10.0 - len;" )

        BuildAdvLinkScript( indx )

        name_array = GetAdvLinkOutputNames( indx )

        for n in range( len(name_array) ):

            print( name_array[n] )



    :param [in]: index int Advanced link index
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of advanced link output names
    """
    return _vsp_g.GetAdvLinkOutputNames(index)

def GetAdvLinkOutputParms(index):
    r"""
    Get the Parm IDs of all the outputs to a specified advanced link index


    .. code-block:: python


        pod = AddGeom( "POD", "" )
        length = FindParm( pod, "Length", "Design" )
        x_pos = GetParm( pod, "X_Rel_Location", "XForm" )

        AddAdvLink( "ExampleLink" )
        indx = GetLinkIndex( "ExampleLink" )
        AddAdvLinkInput( indx, length, "len" )
        AddAdvLinkOutput( indx, x_pos, "x" )

        SetAdvLinkCode( indx, "x = 10.0 - len;" )

        BuildAdvLinkScript( indx )

        parm_array = GetAdvLinkOutputParms( indx )

        for n in range( len(parm_array) ):

            print( parm_array[n] )



    :param [in]: index int Advanced link index
    :rtype: std::vector< std::string,std::allocator< std::string > >
    :return: vector<string> Array of advanced link output Parm IDs
    """
    return _vsp_g.GetAdvLinkOutputParms(index)

def ValidateAdvLinkParms(index):
    r"""
    Validate the input and output parameters for an advanced link


    .. code-block:: python


        pod = AddGeom( "POD", "" )
        length = FindParm( pod, "Length", "Design" )
        x_pos = GetParm( pod, "X_Rel_Location", "XForm" )

        AddAdvLink( "ExampleLink" )
        indx = GetLinkIndex( "ExampleLink" )
        AddAdvLinkInput( indx, length, "len" )
        AddAdvLinkOutput( indx, x_pos, "x" )

        SetAdvLinkCode( indx, "x = 10.0 - len;" )

        BuildAdvLinkScript( indx )

        valid = ValidateAdvLinkParms( indx )

        if  valid :
            print( "Advanced link Parms are valid." )
        else:
            print( "Advanced link Parms are not valid." )



    :param [in]: index int Index for advanced link
    :rtype: boolean
    :return: bool Flag indicating whether parms are valid
    """
    return _vsp_g.ValidateAdvLinkParms(index)

def SetAdvLinkCode(index, code):
    r"""
    Get the code from an advanced link


    .. code-block:: python


        pod = AddGeom( "POD", "" )
        length = FindParm( pod, "Length", "Design" )
        x_pos = GetParm( pod, "X_Rel_Location", "XForm" )

        AddAdvLink( "ExampleLink" )
        indx = GetLinkIndex( "ExampleLink" )
        AddAdvLinkInput( indx, length, "len" )
        AddAdvLinkOutput( indx, x_pos, "x" )

        SetAdvLinkCode( indx, "x = 10.0 - len;" )

        BuildAdvLinkScript( indx )



    :param [in]: index int Index for advanced link
    :param [in]: code string Code for advanced link
    """
    return _vsp_g.SetAdvLinkCode(index, code)

def GetAdvLinkCode(index):
    r"""
    Get the code from an advanced link


    .. code-block:: python


        pod = AddGeom( "POD", "" )
        length = FindParm( pod, "Length", "Design" )
        x_pos = GetParm( pod, "X_Rel_Location", "XForm" )

        AddAdvLink( "ExampleLink" )
        indx = GetLinkIndex( "ExampleLink" )
        AddAdvLinkInput( indx, length, "len" )
        AddAdvLinkOutput( indx, x_pos, "x" )

        SetAdvLinkCode( indx, "x = 10.0 - len;" )

        BuildAdvLinkScript( indx )

        code = GetAdvLinkCode( indx )

        print( code )



    :param [in]: index int Index for advanced link
    :rtype: string
    :return: string String containing advanced link code
    """
    return _vsp_g.GetAdvLinkCode(index)

def SearchReplaceAdvLinkCode(index, _from, to):
    r"""
    Search and replace strings in the advanced link code


    .. code-block:: python


        pod = AddGeom( "POD", "" )
        length = FindParm( pod, "Length", "Design" )
        x_pos = GetParm( pod, "X_Rel_Location", "XForm" )

        AddAdvLink( "ExampleLink" )
        indx = GetLinkIndex( "ExampleLink" )
        AddAdvLinkInput( indx, length, "len" )
        AddAdvLinkOutput( indx, x_pos, "x" )

        SetAdvLinkCode( indx, "x = 10.0 - len;" )
        SearchReplaceAdvLinkCode( indx, "10.0", "12.3" )

        code = GetAdvLinkCode( indx )

        print( code )

        BuildAdvLinkScript( indx )



    :param [in]: index int Index for advanced link
    :param [in]: from string Search token
    :param [in]: to string Replace token
    """
    return _vsp_g.SearchReplaceAdvLinkCode(index, _from, to)

def BuildAdvLinkScript(index):
    r"""
    Build (ready for execution and perform syntax check) an advanced link.


    .. code-block:: python


        pod = AddGeom( "POD", "" )
        length = FindParm( pod, "Length", "Design" )
        x_pos = GetParm( pod, "X_Rel_Location", "XForm" )

        AddAdvLink( "ExampleLink" )
        indx = GetLinkIndex( "ExampleLink" )
        AddAdvLinkInput( indx, length, "len" )
        AddAdvLinkOutput( indx, x_pos, "x" )

        SetAdvLinkCode( indx, "x = 10.0 - len;" )

        success = BuildAdvLinkScript( indx )

        if  success :
            print( "Advanced link build successful." )
        else:
            print( "Advanced link build not successful." )



    :param [in]: index int Index for advanced link
    :rtype: boolean
    :return: bool Flag indicating whether advanced link build was successful
    """
    return _vsp_g.BuildAdvLinkScript(index)

def AddVec3D(INOUT, x, y, z):
    r"""AddVec3D(Vec3dVec INOUT, double x, double y, double z)"""
    return _vsp_g.AddVec3D(INOUT, x, y, z)
class vec3d(object):
    r"""
    vec3d is typically used to describe coordinate points and vectors in 3D space.
    All 3 elements in the vector are of type double.
    """

    thisown = property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc="The membership flag")
    __repr__ = _swig_repr
    v = property(_vsp_g.vec3d_v_get, _vsp_g.vec3d_v_set, doc=r"""v : a(3).double""")

    def __init__(self, *args):
        r"""
        __init__(vec3d self) -> vec3d
        __init__(vec3d self, vec3d a) -> vec3d
        __init__(vec3d self, double xx, double yy, double zz) -> vec3d
        __init__(vec3d self, threed_point_type const & a) -> vec3d
        __init__(vec3d self, double const [3] a) -> vec3d
        __init__(vec3d self, float const [3] a) -> vec3d
        __init__(vec3d self, DoubleVector a) -> vec3d
        """
        _vsp_g.vec3d_swiginit(self, _vsp_g.new_vec3d(*args))

    def as_vec2d_xy(self):
        r"""as_vec2d_xy(vec3d self) -> vec2d"""
        return _vsp_g.vec3d_as_vec2d_xy(self)

    def set_xyz(self, xx, yy, zz):
        r"""
        Set all three elements of the vec3d vector


        .. code-block:: python

                #==== Test Vec3d ====//
            vec3d a()                                # Default Constructor

            a.set_xyz( 2.0, 4.0, 6.0 )


        :param [in]: xx New X value
        :param [in]: yy New Y value
        :param [in]: zz New Z value
        :rtype: :py:class:`vec3d`
        :return: Updated vec3d
        """
        return _vsp_g.vec3d_set_xyz(self, xx, yy, zz)

    def set_vec(self, a):
        r"""set_vec(vec3d self, DoubleVector a) -> vec3d"""
        return _vsp_g.vec3d_set_vec(self, a)

    def set_arr(self, *args):
        r"""
        set_arr(vec3d self, double const [] a) -> vec3d
        set_arr(vec3d self, float const [] a) -> vec3d
        """
        return _vsp_g.vec3d_set_arr(self, *args)

    def set_x(self, xx):
        r"""
        Set the X coordinate (index 0) of the vec3d


        .. code-block:: python

                #==== Test Vec3d ====//
            vec3d a()                                # Default Constructor

            a.set_x( 2.0 )


        :param [in]: xx New X value
        :rtype: :py:class:`vec3d`
        :return: Updated vec3d
        """
        return _vsp_g.vec3d_set_x(self, xx)

    def set_y(self, yy):
        r"""
        Set the Y coordinate (index 1) of the vec3d


        .. code-block:: python

                #==== Test Vec3d ====//
            vec3d a()                                # Default Constructor

            a.set_y( 4.0 )


        :param [in]: yy New Y value
        :rtype: :py:class:`vec3d`
        :return: Updated vec3d
        """
        return _vsp_g.vec3d_set_y(self, yy)

    def set_z(self, zz):
        r"""
        Set the z coordinate (index 2) of the vec3d


        .. code-block:: python

                #==== Test Vec3d ====//
            vec3d a()                                # Default Constructor

            a.set_z( 6.0 )


        :param [in]: zz in double new z value
        :rtype: :py:class:`vec3d`
        :return: vec3d result
        """
        return _vsp_g.vec3d_set_z(self, zz)

    def set_refx(self, a):
        r"""set_refx(vec3d self, vec3d a) -> vec3d"""
        return _vsp_g.vec3d_set_refx(self, a)

    def set_refy(self, a):
        r"""set_refy(vec3d self, vec3d a) -> vec3d"""
        return _vsp_g.vec3d_set_refy(self, a)

    def set_refz(self, a):
        r"""set_refz(vec3d self, vec3d a) -> vec3d"""
        return _vsp_g.vec3d_set_refz(self, a)

    def get_pnt(self, *args):
        r"""
        get_pnt(vec3d self, double [3] pnt)
        get_pnt(vec3d self, float [3] pnt)
        get_pnt(vec3d self, threed_point_type & pnt)
        """
        return _vsp_g.vec3d_get_pnt(self, *args)

    def x(self):
        r"""
        Get the X coordinate (index 0) of the vec3d


        .. code-block:: python

                vec3d a()                                # Default Constructor

            a.set_xyz( 2.0, 4.0, 6.0 )

            Print( "a.x() = ", False )
            Print( a.x() )

            Print( "a[0]= ", False )
            Print( a[0] )


        :rtype: float
        :return: X value
        """
        return _vsp_g.vec3d_x(self)

    def y(self):
        r"""
        Get the Y coordinate (index 1) of the vec3d


        .. code-block:: python

                vec3d a()                                # Default Constructor

            a.set_xyz( 2.0, 4.0, 6.0 )

            Print( "a.y() = ", False )
            Print( a.y() )

            Print( "a[1]= ", False )
            Print( a[1] )


        :rtype: float
        :return: Y value
        """
        return _vsp_g.vec3d_y(self)

    def z(self):
        r"""
        Get the Z coordinate (index 2) of the vec3d


        .. code-block:: python

                vec3d a()                                # Default Constructor

            a.set_xyz( 2.0, 4.0, 6.0 )

            Print( "a.z() = ", False )
            Print( a.z() )

            Print( "a[2]= ", False )
            Print( a[2] )


        :rtype: float
        :return: Z value
        """
        return _vsp_g.vec3d_z(self)

    def data(self):
        r"""data(vec3d self) -> double *"""
        return _vsp_g.vec3d_data(self)

    def Transform(self, m):
        r"""Transform(vec3d self, Matrix4d m)"""
        return _vsp_g.vec3d_Transform(self, m)

    def FlipNormal(self):
        r"""FlipNormal(vec3d self)"""
        return _vsp_g.vec3d_FlipNormal(self)

    def rotate_x(self, theta):
        r"""
        Rotate the vec3d about the X axis.


        .. code-block:: python

            import math
            #==== Test Vec3d ====//
            vec3d a()                                # Default Constructor
            PI = 3.14

            a.set_xyz( 1.0, 0.0, 0.0 )

            a.rotate_x( 0.5 * PI )


        :param [in]: theta double Rotation angle in radians
        """
        return _vsp_g.vec3d_rotate_x(self, theta)

    def rotate_y(self, theta):
        r"""
        Rotate the vec3d about the Y axis.


        .. code-block:: python

            import math
            #==== Test Vec3d ====//
            vec3d a()                                # Default Constructor
            PI = 3.14

            a.set_xyz( 1.0, 0.0, 0.0 )

            a.rotate_y( 0.5 * PI )


        :param [in]: theta double Rotation angle in radians
        """
        return _vsp_g.vec3d_rotate_y(self, theta)

    def rotate_z(self, theta):
        r"""
        Rotate the vec3d about the Z axis.


        .. code-block:: python

            import math
            #==== Test Vec3d ====//
            vec3d a()                                # Default Constructor
            PI = 3.14

            a.set_xyz( 1.0, 0.0, 0.0 )

            a.rotate_z( 0.5 * PI )


        :param [in]: theta double Rotation angle in radians
        """
        return _vsp_g.vec3d_rotate_z(self, theta)

    def scale_x(self, scale):
        r"""
        Scale the X coordinate of the vec3d


        .. code-block:: python

                #==== Test Vec3d ====//
            vec3d a()                                # Default Constructor

            #===== Test Scale ====//
            a.set_xyz( 2.0, 2.0, 2.0 )

            a.scale_x( 2.0 )


        :param [in]: scale Scaling factor for the X value
        """
        return _vsp_g.vec3d_scale_x(self, scale)

    def scale_y(self, scale):
        r"""
        Scale the Y coordinate of the vec3d


        .. code-block:: python

                #==== Test Vec3d ====//
            vec3d a()                                # Default Constructor

            #===== Test Scale ====//
            a.set_xyz( 2.0, 2.0, 2.0 )

            a.scale_y( 2.0 )


        :param [in]: scale Scaling factor for the Y value
        """
        return _vsp_g.vec3d_scale_y(self, scale)

    def scale_z(self, scale):
        r"""
        Scale the Z coordinate of the vec3d


        .. code-block:: python

                #==== Test Vec3d ====//
            vec3d a()                                # Default Constructor

            #===== Test Scale ====//
            a.set_xyz( 2.0, 2.0, 2.0 )

            a.scale_z( 2.0 )


        :param [in]: scale Scaling factor for the Z value
        """
        return _vsp_g.vec3d_scale_z(self, scale)

    def offset_x(self, offset):
        r"""
        Offset the X coordinate of the vec3d


        .. code-block:: python

                #==== Test Vec3d ====//
            vec3d a()                                # Default Constructor

            #===== Test Offset ====//
            a.set_xyz( 2.0, 2.0, 2.0 )

            a.offset_x( 10.0 )


        :param [in]: offset Offset for the X value
        """
        return _vsp_g.vec3d_offset_x(self, offset)

    def offset_y(self, offset):
        r"""
        Offset the Y coordinate of the vec3d


        .. code-block:: python

                #==== Test Vec3d ====//
            vec3d a()                                # Default Constructor

            #===== Test Offset ====//
            a.set_xyz( 2.0, 2.0, 2.0 )

            a.offset_y( 10.0 )


        :param [in]: offset Offset for the Y value
        """
        return _vsp_g.vec3d_offset_y(self, offset)

    def offset_z(self, offset):
        r"""
        Offset the Z coordinate of the vec3d


        .. code-block:: python

                #==== Test Vec3d ====//
            vec3d a()                                # Default Constructor

            #===== Test Offset ====//
            a.set_xyz( 2.0, 2.0, 2.0 )

            a.offset_z( 10.0 )


        :param [in]: offset Offset for the Z value
        """
        return _vsp_g.vec3d_offset_z(self, offset)

    def offset_i(self, offset, idir):
        r"""offset_i(vec3d self, double offset, int idir)"""
        return _vsp_g.vec3d_offset_i(self, offset, idir)

    def reflect_xy(self):
        r"""
        Reflect the vec3d across the XY plane


        .. code-block:: python

                #==== Test Vec3d ====//
            vec3d a(), b()                                # Default Constructor

            #===== Test Reflect ====//
            a.set_xyz( 1.0, 2.0, 3.0 )

            b = a.reflect_xy()


        :rtype: :py:class:`vec3d`
        :return: Reflected vec3d
        """
        return _vsp_g.vec3d_reflect_xy(self)

    def reflect_xz(self):
        r"""
        Reflect the vec3d across the XZ plane


        .. code-block:: python

                #==== Test Vec3d ====//
            vec3d a(), b()                                # Default Constructor

            #===== Test Reflect ====//
            a.set_xyz( 1.0, 2.0, 3.0 )

            b = a.reflect_xz()


        :rtype: :py:class:`vec3d`
        :return: Reflected vec3d
        """
        return _vsp_g.vec3d_reflect_xz(self)

    def reflect_yz(self):
        r"""
        Reflect the vec3d across the YZ plane


        .. code-block:: python

                #==== Test Vec3d ====//
            vec3d a(), b()                                # Default Constructor

            #===== Test Reflect ====//
            a.set_xyz( 1.0, 2.0, 3.0 )

            b = a.reflect_yz()


        :rtype: :py:class:`vec3d`
        :return: Reflected vec3d
        """
        return _vsp_g.vec3d_reflect_yz(self)

    def swap_xy(self):
        r"""swap_xy(vec3d self) -> vec3d"""
        return _vsp_g.vec3d_swap_xy(self)

    def swap_xz(self):
        r"""swap_xz(vec3d self) -> vec3d"""
        return _vsp_g.vec3d_swap_xz(self)

    def swap_yz(self):
        r"""swap_yz(vec3d self) -> vec3d"""
        return _vsp_g.vec3d_swap_yz(self)

    def __imul__(self, b):
        r"""__imul__(vec3d self, double b) -> vec3d"""
        return _vsp_g.vec3d___imul__(self, b)

    def __iadd__(self, *args):
        r"""
        __iadd__(vec3d self, vec3d b) -> vec3d
        __iadd__(vec3d self, double [] b) -> vec3d
        __iadd__(vec3d self, float [] b) -> vec3d
        """
        return _vsp_g.vec3d___iadd__(self, *args)

    def __isub__(self, *args):
        r"""
        __isub__(vec3d self, vec3d b) -> vec3d
        __isub__(vec3d self, double [] b) -> vec3d
        __isub__(vec3d self, float [] b) -> vec3d
        """
        return _vsp_g.vec3d___isub__(self, *args)

    def mag(self):
        r"""
        Get the magnitude of a vec3d


        .. code-block:: python

            import math
            #==== Test Vec3d ====//
            vec3d a()                                # Default Constructor

            #==== Test Mag ====//
            a.set_xyz( 1.0, 2.0, 3.0 )

            if  abs( a.mag() - math.sqrt( 14 ) ) > 1e-6 : Print( "---> Error: Vec3d Mag " ); }


        :rtype: float
        :return: Magnitude
        """
        return _vsp_g.vec3d_mag(self)

    def magsq(self):
        r"""magsq(vec3d self) -> double"""
        return _vsp_g.vec3d_magsq(self)

    def normalize(self):
        r"""
        Normalize the vec3d


        .. code-block:: python

                #==== Test Vec3d ====//
            vec3d a(), b(), c()                                # Default Constructor

            #==== Test Cross ====//
            a.set_xyz( 4.0, 0.0, 0.0 )
            b.set_xyz( 0.0, 3.0, 0.0 )

            c = cross( a, b )

            c.normalize()


        """
        return _vsp_g.vec3d_normalize(self)

    def major_comp(self):
        r"""major_comp(vec3d self) -> int"""
        return _vsp_g.vec3d_major_comp(self)

    def minor_comp(self):
        r"""minor_comp(vec3d self) -> int"""
        return _vsp_g.vec3d_minor_comp(self)

    def isnan(self):
        r"""isnan(vec3d self) -> bool"""
        return _vsp_g.vec3d_isnan(self)

    def isinf(self):
        r"""isinf(vec3d self) -> bool"""
        return _vsp_g.vec3d_isinf(self)

    def isfinite(self):
        r"""isfinite(vec3d self) -> bool"""
        return _vsp_g.vec3d_isfinite(self)

    def _print(self, *args):
        r"""_print(vec3d self, char const * label="")"""
        return _vsp_g.vec3d__print(self, *args)

    def as_numpy(self):
        return _vsp_g.vec3d_as_numpy(self)
    __swig_destroy__ = _vsp_g.delete_vec3d

# Register vec3d in _vsp_g:
_vsp_g.vec3d_swigregister(vec3d)
cvar = _vsp_g.cvar

def signed_angle(a, b, ref):
    r"""signed_angle(vec3d a, vec3d b, vec3d ref) -> double"""
    return _vsp_g.signed_angle(a, b, ref)

def radius_of_circle(p1, p2, p3):
    r"""radius_of_circle(vec3d p1, vec3d p2, vec3d p3) -> double"""
    return _vsp_g.radius_of_circle(p1, p2, p3)

def center_of_circle(p1, p2, p3, center):
    r"""center_of_circle(vec3d p1, vec3d p2, vec3d p3, vec3d center)"""
    return _vsp_g.center_of_circle(p1, p2, p3, center)

def triangle_plane_intersect_test(org, norm, p1, p2, p3):
    r"""triangle_plane_intersect_test(vec3d org, vec3d norm, vec3d p1, vec3d p2, vec3d p3) -> bool"""
    return _vsp_g.triangle_plane_intersect_test(org, norm, p1, p2, p3)

def triangle_plane_minimum_dist(org, norm, p1, p2, p3, pa, pb):
    r"""triangle_plane_minimum_dist(vec3d org, vec3d norm, vec3d p1, vec3d p2, vec3d p3, vec3d pa, vec3d pb) -> double"""
    return _vsp_g.triangle_plane_minimum_dist(org, norm, p1, p2, p3, pa, pb)

def triangle_plane_maximum_dist(org, norm, p1, p2, p3, pa, pb):
    r"""triangle_plane_maximum_dist(vec3d org, vec3d norm, vec3d p1, vec3d p2, vec3d p3, vec3d pa, vec3d pb) -> double"""
    return _vsp_g.triangle_plane_maximum_dist(org, norm, p1, p2, p3, pa, pb)

def plane_plane_intersection(p0, n0, p1, n1, p, v):
    r"""plane_plane_intersection(vec3d p0, vec3d n0, vec3d p1, vec3d n1, vec3d p, vec3d v) -> bool"""
    return _vsp_g.plane_plane_intersection(p0, n0, p1, n1, p, v)

def angle_pnt_2_plane(*args):
    r"""
    angle_pnt_2_plane(vec3d ptplane, vec3d norm, vec3d ptaxis, vec3d axis, vec3d pt, int ccw, vec3d prot) -> double
    angle_pnt_2_plane(vec3d ptplane, vec3d norm, vec3d ptaxis, vec3d axis, vec3d pt, int ccw, vec3d prot1, vec3d prot2, double & theta1, double & theta2)
    """
    return _vsp_g.angle_pnt_2_plane(*args)

def signed_dist_pnt_2_plane(org, norm, pnt):
    r"""signed_dist_pnt_2_plane(vec3d org, vec3d norm, vec3d pnt) -> double"""
    return _vsp_g.signed_dist_pnt_2_plane(org, norm, pnt)

def dist_pnt_2_plane(org, norm, pnt):
    r"""dist_pnt_2_plane(vec3d org, vec3d norm, vec3d pnt) -> double"""
    return _vsp_g.dist_pnt_2_plane(org, norm, pnt)

def dist_pnt_2_line(line_pt1, line_pt2, pnt):
    r"""dist_pnt_2_line(vec3d line_pt1, vec3d line_pt2, vec3d pnt) -> double"""
    return _vsp_g.dist_pnt_2_line(line_pt1, line_pt2, pnt)

def dist_pnt_2_ray(line_pt1, dir_unit_vec, pnt):
    r"""dist_pnt_2_ray(vec3d line_pt1, vec3d dir_unit_vec, vec3d pnt) -> double"""
    return _vsp_g.dist_pnt_2_ray(line_pt1, dir_unit_vec, pnt)

def proj_u_on_v(u, v):
    r"""proj_u_on_v(vec3d u, vec3d v) -> vec3d"""
    return _vsp_g.proj_u_on_v(u, v)

def proj_pnt_on_ray(*args):
    r"""
    proj_pnt_on_ray(vec3d line_pt1, vec3d line_dir, vec3d pnt) -> vec3d
    proj_pnt_on_ray(vec3d line_pt1, vec3d line_dir, vec3d pnt, double & t) -> vec3d
    """
    return _vsp_g.proj_pnt_on_ray(*args)

def proj_pnt_on_line(line_pt1, line_pt2, pnt):
    r"""proj_pnt_on_line(vec3d line_pt1, vec3d line_pt2, vec3d pnt) -> vec3d"""
    return _vsp_g.proj_pnt_on_line(line_pt1, line_pt2, pnt)

def proj_pnt_to_plane(org, plane_ln1, plane_ln2, pnt):
    r"""proj_pnt_to_plane(vec3d org, vec3d plane_ln1, vec3d plane_ln2, vec3d pnt) -> vec3d"""
    return _vsp_g.proj_pnt_to_plane(org, plane_ln1, plane_ln2, pnt)

def proj_vec_to_plane(vec, norm):
    r"""proj_vec_to_plane(vec3d vec, vec3d norm) -> vec3d"""
    return _vsp_g.proj_vec_to_plane(vec, norm)

def tri_seg_intersect(A, B, C, D, E, u, w, t):
    r"""tri_seg_intersect(vec3d A, vec3d B, vec3d C, vec3d D, vec3d E, double & u, double & w, double & t) -> int"""
    return _vsp_g.tri_seg_intersect(A, B, C, D, E, u, w, t)

def tri_ray_intersect(A, B, C, D, E, u, w, t):
    r"""tri_ray_intersect(vec3d A, vec3d B, vec3d C, vec3d D, vec3d E, double & u, double & w, double & t) -> int"""
    return _vsp_g.tri_ray_intersect(A, B, C, D, E, u, w, t)

def plane_ray_intersect(*args):
    r"""
    plane_ray_intersect(vec3d A, vec3d B, vec3d C, vec3d D, vec3d E, double & t) -> int
    plane_ray_intersect(vec3d orig, vec3d norm, vec3d D, vec3d E, double & t) -> int
    """
    return _vsp_g.plane_ray_intersect(*args)

def ray_ray_intersect(A, B, C, D, int_pnt1, int_pnt2):
    r"""ray_ray_intersect(vec3d A, vec3d B, vec3d C, vec3d D, vec3d int_pnt1, vec3d int_pnt2) -> int"""
    return _vsp_g.ray_ray_intersect(A, B, C, D, int_pnt1, int_pnt2)

def tetra_volume(A, B, C):
    r"""tetra_volume(vec3d A, vec3d B, vec3d C) -> double"""
    return _vsp_g.tetra_volume(A, B, C)

def area(A, B, C):
    r"""area(vec3d A, vec3d B, vec3d C) -> double"""
    return _vsp_g.area(A, B, C)

def dist3D_Segment_to_Segment(*args):
    r"""
    dist3D_Segment_to_Segment(vec3d S1P0, vec3d S1P1, vec3d S2P0, vec3d S2P1) -> double
    dist3D_Segment_to_Segment(vec3d S1P0, vec3d S1P1, vec3d S2P0, vec3d S2P1, double * Lt, vec3d Ln, double * St, vec3d Sn) -> double
    """
    return _vsp_g.dist3D_Segment_to_Segment(*args)

def nearSegSeg(L0, L1, S0, S1, Lt, Ln, St, Sn):
    r"""nearSegSeg(vec3d L0, vec3d L1, vec3d S0, vec3d S1, double * Lt, vec3d Ln, double * St, vec3d Sn) -> double"""
    return _vsp_g.nearSegSeg(L0, L1, S0, S1, Lt, Ln, St, Sn)

def pointLineDistSquared(p, lp0, lp1, t, pon):
    r"""pointLineDistSquared(vec3d p, vec3d lp0, vec3d lp1, double & t, vec3d pon) -> double"""
    return _vsp_g.pointLineDistSquared(p, lp0, lp1, t, pon)

def pointSegDistSquared(p, sp0, sp1, t, pon):
    r"""pointSegDistSquared(vec3d p, vec3d sp0, vec3d sp1, double & t, vec3d pon) -> double"""
    return _vsp_g.pointSegDistSquared(p, sp0, sp1, t, pon)

def point_on_line(lp0, lp1, t):
    r"""point_on_line(vec3d lp0, vec3d lp1, double const & t) -> vec3d"""
    return _vsp_g.point_on_line(lp0, lp1, t)

def MapToPlane(p, planeOrig, planeVec1, planeVec2):
    r"""MapToPlane(vec3d p, vec3d planeOrig, vec3d planeVec1, vec3d planeVec2) -> vec2d"""
    return _vsp_g.MapToPlane(p, planeOrig, planeVec1, planeVec2)

def MapFromPlane(uw, planeOrig, planeVec1, planeVec2):
    r"""MapFromPlane(vec2d uw, vec3d planeOrig, vec3d planeVec1, vec3d planeVec2) -> vec3d"""
    return _vsp_g.MapFromPlane(uw, planeOrig, planeVec1, planeVec2)

def plane_half_space(planeOrig, planeNorm, pnt):
    r"""plane_half_space(vec3d planeOrig, vec3d planeNorm, vec3d pnt) -> int"""
    return _vsp_g.plane_half_space(planeOrig, planeNorm, pnt)

def line_line_intersect(p1, p2, p3, p4, s, t):
    r"""line_line_intersect(vec3d p1, vec3d p2, vec3d p3, vec3d p4, double * s, double * t) -> bool"""
    return _vsp_g.line_line_intersect(p1, p2, p3, p4, s, t)

def RotateArbAxis(p, theta, r):
    r"""RotateArbAxis(vec3d p, double theta, vec3d r) -> vec3d"""
    return _vsp_g.RotateArbAxis(p, theta, r)

def PtInTri(v0, v1, v2, p):
    r"""PtInTri(vec3d v0, vec3d v1, vec3d v2, vec3d p) -> bool"""
    return _vsp_g.PtInTri(v0, v1, v2, p)

def BarycentricWeights(v0, v1, v2, p):
    r"""BarycentricWeights(vec3d v0, vec3d v1, vec3d v2, vec3d p) -> vec3d"""
    return _vsp_g.BarycentricWeights(v0, v1, v2, p)

def BilinearWeights(p0, p1, p, weights):
    r"""BilinearWeights(vec3d p0, vec3d p1, vec3d p, DoubleVector weights)"""
    return _vsp_g.BilinearWeights(p0, p1, p, weights)

def tri_tri_min_dist(v0, v1, v2, v3, v4, v5, p1, p2):
    r"""tri_tri_min_dist(vec3d v0, vec3d v1, vec3d v2, vec3d v3, vec3d v4, vec3d v5, vec3d p1, vec3d p2) -> double"""
    return _vsp_g.tri_tri_min_dist(v0, v1, v2, v3, v4, v5, p1, p2)

def pnt_tri_min_dist(v0, v1, v2, pnt, pnearest):
    r"""pnt_tri_min_dist(vec3d v0, vec3d v1, vec3d v2, vec3d pnt, vec3d pnearest) -> double"""
    return _vsp_g.pnt_tri_min_dist(v0, v1, v2, pnt, pnearest)

def slerp(a, b, t):
    r"""slerp(vec3d a, vec3d b, double const & t) -> vec3d"""
    return _vsp_g.slerp(a, b, t)

def printpt(v):
    r"""printpt(vec3d v)"""
    return _vsp_g.printpt(v)

def ToSpherical(v):
    r"""ToSpherical(vec3d v) -> vec3d"""
    return _vsp_g.ToSpherical(v)

def ToSpherical2(v, vdet):
    r"""ToSpherical2(vec3d v, vec3d vdet) -> vec3d"""
    return _vsp_g.ToSpherical2(v, vdet)

def ToCartesian(v):
    r"""ToCartesian(vec3d v) -> vec3d"""
    return _vsp_g.ToCartesian(v)

def FitPlane(pts, cen, norm):
    r"""FitPlane(Vec3dVec pts, vec3d cen, vec3d norm)"""
    return _vsp_g.FitPlane(pts, cen, norm)


def to_string(v):
    r"""to_string(vec3d v) -> std::string"""
    return _vsp_g.to_string(v)

def compsum(x):
    r"""compsum(Vec3dVec x) -> vec3d"""
    return _vsp_g.compsum(x)

def raySphereIntersectionFromInside(p, v, c, r, x):
    r"""raySphereIntersectionFromInside(vec3d p, vec3d v, vec3d c, double r, vec3d x) -> bool"""
    return _vsp_g.raySphereIntersectionFromInside(p, v, c, r, x)
class vec2d(object):
    r"""Proxy of C++ vec2d class."""

    thisown = property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc="The membership flag")
    __repr__ = _swig_repr
    v = property(_vsp_g.vec2d_v_get, _vsp_g.vec2d_v_set, doc=r"""v : a(2).double""")

    def __init__(self, *args):
        r"""
        __init__(vec2d self) -> vec2d
        __init__(vec2d self, vec2d a) -> vec2d
        __init__(vec2d self, double xx, double yy) -> vec2d
        """
        _vsp_g.vec2d_swiginit(self, _vsp_g.new_vec2d(*args))

    def set_xy(self, xx, yy):
        r"""set_xy(vec2d self, double xx, double yy) -> vec2d"""
        return _vsp_g.vec2d_set_xy(self, xx, yy)

    def set_x(self, xx):
        r"""set_x(vec2d self, double xx) -> vec2d"""
        return _vsp_g.vec2d_set_x(self, xx)

    def set_y(self, yy):
        r"""set_y(vec2d self, double yy) -> vec2d"""
        return _vsp_g.vec2d_set_y(self, yy)

    def x(self):
        r"""x(vec2d self) -> double"""
        return _vsp_g.vec2d_x(self)

    def y(self):
        r"""y(vec2d self) -> double"""
        return _vsp_g.vec2d_y(self)

    def data(self):
        r"""data(vec2d self) -> double *"""
        return _vsp_g.vec2d_data(self)

    def transform(self, *args):
        r"""
        transform(vec2d self, float [3][3] mat) -> vec2d
        transform(vec2d self, double [3][3] mat) -> vec2d
        """
        return _vsp_g.vec2d_transform(self, *args)

    def __iadd__(self, b):
        r"""__iadd__(vec2d self, vec2d b) -> vec2d"""
        return _vsp_g.vec2d___iadd__(self, b)

    def __isub__(self, b):
        r"""__isub__(vec2d self, vec2d b) -> vec2d"""
        return _vsp_g.vec2d___isub__(self, b)

    def __imul__(self, b):
        r"""__imul__(vec2d self, double b) -> vec2d"""
        return _vsp_g.vec2d___imul__(self, b)

    def mag(self):
        r"""mag(vec2d self) -> double"""
        return _vsp_g.vec2d_mag(self)

    def normalize(self):
        r"""normalize(vec2d self)"""
        return _vsp_g.vec2d_normalize(self)
    __swig_destroy__ = _vsp_g.delete_vec2d

# Register vec2d in _vsp_g:
_vsp_g.vec2d_swigregister(vec2d)

def dist(*args):
    r"""
    dist(vec3d a, vec3d b) -> double
    dist(vec2d a, vec2d b) -> double
    """
    return _vsp_g.dist(*args)

def dist_squared(*args):
    r"""
    dist_squared(vec3d a, vec3d b) -> double
    dist_squared(vec2d a, vec2d b) -> double
    """
    return _vsp_g.dist_squared(*args)

def cross(*args):
    r"""
    cross(vec3d a, vec3d b) -> vec3d
    cross(vec2d a, vec2d b) -> double
    """
    return _vsp_g.cross(*args)

def dot(*args):
    r"""
    dot(vec3d a, vec3d b) -> double
    dot(vec2d a, vec2d b) -> double
    """
    return _vsp_g.dot(*args)

def angle(*args):
    r"""
    angle(vec3d a, vec3d b) -> double
    angle(vec2d a, vec2d b) -> double
    """
    return _vsp_g.angle(*args)

def cos_angle(*args):
    r"""
    cos_angle(vec3d a, vec3d b) -> double
    cos_angle(vec2d a, vec2d b) -> double
    """
    return _vsp_g.cos_angle(*args)

def seg_seg_intersect(pnt_A, pnt_B, pnt_C, pnt_D, int_pnt, t1, t2):
    r"""seg_seg_intersect(vec2d pnt_A, vec2d pnt_B, vec2d pnt_C, vec2d pnt_D, vec2d int_pnt, double & t1, double & t2) -> int"""
    return _vsp_g.seg_seg_intersect(pnt_A, pnt_B, pnt_C, pnt_D, int_pnt, t1, t2)

def proj_pnt_on_line_seg(*args):
    r"""
    proj_pnt_on_line_seg(vec3d line_pt1, vec3d line_pt2, vec3d pnt) -> vec3d
    proj_pnt_on_line_seg(vec2d line_A, vec2d line_B, vec2d pnt) -> vec2d
    """
    return _vsp_g.proj_pnt_on_line_seg(*args)

def proj_pnt_on_line_u(line_A, line_B, pnt):
    r"""proj_pnt_on_line_u(vec2d line_A, vec2d line_B, vec2d pnt) -> double"""
    return _vsp_g.proj_pnt_on_line_u(line_A, line_B, pnt)

def encode(x_min, y_min, x_max, y_max, pnt, code):
    r"""encode(double x_min, double y_min, double x_max, double y_max, vec2d pnt, int [4] code)"""
    return _vsp_g.encode(x_min, y_min, x_max, y_max, pnt, code)

def clip_seg_rect(x_min, y_min, x_max, y_max, pnt1, pnt2, visible):
    r"""clip_seg_rect(double x_min, double y_min, double x_max, double y_max, vec2d pnt1, vec2d pnt2, int & visible)"""
    return _vsp_g.clip_seg_rect(x_min, y_min, x_max, y_max, pnt1, pnt2, visible)

def PointInPolygon(R, pnts):
    r"""PointInPolygon(vec2d R, std::vector< vec2d,std::allocator< vec2d > > const & pnts) -> bool"""
    return _vsp_g.PointInPolygon(R, pnts)

def det(p0, p1, offset):
    r"""det(vec2d p0, vec2d p1, vec2d offset) -> double"""
    return _vsp_g.det(p0, p1, offset)

def poly_area(*args):
    r"""
    poly_area(Vec3dVec pnt_vec) -> double
    poly_area(std::vector< vec2d,std::allocator< vec2d > > const & pnt_vec) -> double
    """
    return _vsp_g.poly_area(*args)

def poly_centroid(pnt_vec):
    r"""poly_centroid(std::vector< vec2d,std::allocator< vec2d > > const & pnt_vec) -> vec2d"""
    return _vsp_g.poly_centroid(pnt_vec)

def orient2d(p0, p1, p):
    r"""orient2d(vec2d p0, vec2d p1, vec2d p) -> double"""
    return _vsp_g.orient2d(p0, p1, p)

def bi_lin_interp(p0, p1, p2, p3, s, t, p):
    r"""bi_lin_interp(vec2d p0, vec2d p1, vec2d p2, vec2d p3, double s, double t, vec2d p)"""
    return _vsp_g.bi_lin_interp(p0, p1, p2, p3, s, t, p)

def inverse_bi_lin_interp(p0, p1, p2, p3, p, s, t, s2, t2):
    r"""inverse_bi_lin_interp(vec2d p0, vec2d p1, vec2d p2, vec2d p3, vec2d p, double & s, double & t, double & s2, double & t2) -> int"""
    return _vsp_g.inverse_bi_lin_interp(p0, p1, p2, p3, p, s, t, s2, t2)

class Matrix4d(object):
    r"""Matrix4d is typically used to perform rotations, translations, scaling, projections, and other transformations in 3D space."""

    thisown = property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc="The membership flag")
    __repr__ = _swig_repr

    def __init__(self):
        r"""__init__(Matrix4d self) -> Matrix4d"""
        _vsp_g.Matrix4d_swiginit(self, _vsp_g.new_Matrix4d())

    def loadIdentity(self):
        r"""
        Create a 4x4 identity matrix


        .. code-block:: python

                #==== Test Matrix4d ====//
            Matrix4d m()                            # Default Constructor
            m.loadIdentity()


        """
        return _vsp_g.Matrix4d_loadIdentity(self)

    def _print(self, *args):
        r"""_print(Matrix4d self, std::string const & header="")"""
        return _vsp_g.Matrix4d__print(self, *args)

    @staticmethod
    def setIdentity(m):
        r"""setIdentity(double * m)"""
        return _vsp_g.Matrix4d_setIdentity(m)

    def translatef(self, x, y, z):
        r"""
        Translate the Matrix4d along the given axes values


        .. code-block:: python

                #==== Test Matrix4d ====//
            Matrix4d m()                            # Default Constructor

            m.loadIdentity()

            m.translatef( 1.0, 0.0, 0.0 )


        :param [in]: x Translation along the X axis
        :param [in]: y Translation along the Y axis
        :param [in]: z Translation along the Z axis
        """
        return _vsp_g.Matrix4d_translatef(self, x, y, z)

    def translatev(self, v):
        r"""translatev(Matrix4d self, vec3d v)"""
        return _vsp_g.Matrix4d_translatev(self, v)

    def rotateX(self, ang):
        r"""
        Rotate the Matrix4d about the X axis


        .. code-block:: python

                #==== Test Matrix4d ====//
            Matrix4d m()                            # Default Constructor

            m.loadIdentity()

            m.rotateX( 90.0 )


        :param [in]: ang Angle of rotation (degrees)
        """
        return _vsp_g.Matrix4d_rotateX(self, ang)

    def rotateY(self, ang):
        r"""
        Rotate the Matrix4d about the Y axis


        .. code-block:: python

                #==== Test Matrix4d ====//
            Matrix4d m()                            # Default Constructor

            m.loadIdentity()

            m.rotateY( 90.0 )


        :param [in]: ang Angle of rotation (degrees)
        """
        return _vsp_g.Matrix4d_rotateY(self, ang)

    def rotateZ(self, ang):
        r"""
        Rotate the Matrix4d about the Z axis


        .. code-block:: python

                #==== Test Matrix4d ====//
            Matrix4d m()                            # Default Constructor

            m.loadIdentity()

            m.rotateZ( 90.0 )


        :param [in]: ang Angle of rotation (degrees)
        """
        return _vsp_g.Matrix4d_rotateZ(self, ang)

    def rotate(self, angle, axis):
        r"""
        Rotate the Matrix4d about an arbitrary axis


        .. code-block:: python

                #==== Test Matrix4d ====//
            Matrix4d m()                            # Default Constructor
            PI = 3.14

            m.loadIdentity()

            m.rotate( PI / 4, vec3d( 0.0, 0.0, 1.0 ) )      # Radians


        :param [in]: angle Angle of rotation (rad)
        :param [in]: axis Vector to rotate about
        """
        return _vsp_g.Matrix4d_rotate(self, angle, axis)

    def rotatealongX(self, dir1):
        r"""rotatealongX(Matrix4d self, vec3d dir1)"""
        return _vsp_g.Matrix4d_rotatealongX(self, dir1)

    def zeroTranslations(self):
        r"""zeroTranslations(Matrix4d self)"""
        return _vsp_g.Matrix4d_zeroTranslations(self)

    def affineInverse(self):
        r"""
        Perform an affine transform on the Matrix4d


        .. code-block:: python

                #==== Test Matrix4d ====//
            Matrix4d m()                            # Default Constructor

            m.loadIdentity()

            m.rotateY( 10.0 )
            m.rotateX( 20.0 )
            m.rotateZ( 30.0 )

            vec3d c = m.xform( vec3d( 1.0, 1.0, 1.0 ) )

            m.affineInverse()

        """
        return _vsp_g.Matrix4d_affineInverse(self)

    def scale(self, scale):
        r"""
        Multiply the Matrix4d by a scalar value


        .. code-block:: python

                #==== Test Matrix4d ====//
            Matrix4d m()                            # Default Constructor

            m.loadXZRef()

            m.scale( 10.0 )


        :param [in]: scale Value to scale by
        """
        return _vsp_g.Matrix4d_scale(self, scale)

    def scalex(self, scalex):
        r"""scalex(Matrix4d self, double const & scalex)"""
        return _vsp_g.Matrix4d_scalex(self, scalex)

    def scaley(self, scaley):
        r"""scaley(Matrix4d self, double const & scaley)"""
        return _vsp_g.Matrix4d_scaley(self, scaley)

    def scalez(self, scalez):
        r"""scalez(Matrix4d self, double const & scalez)"""
        return _vsp_g.Matrix4d_scalez(self, scalez)

    def flipx(self):
        r"""flipx(Matrix4d self)"""
        return _vsp_g.Matrix4d_flipx(self)

    def getMat(self, m):
        r"""getMat(Matrix4d self, double * m)"""
        return _vsp_g.Matrix4d_getMat(self, m)

    def matMult(self, *args):
        r"""
        matMult(Matrix4d self, double const * m)
        matMult(Matrix4d self, Matrix4d m)
        """
        return _vsp_g.Matrix4d_matMult(self, *args)

    def postMult(self, *args):
        r"""
        postMult(Matrix4d self, double const * m)
        postMult(Matrix4d self, Matrix4d m)
        """
        return _vsp_g.Matrix4d_postMult(self, *args)

    def initMat(self, *args):
        r"""
        initMat(Matrix4d self, double const * m)
        initMat(Matrix4d self, Matrix4d m)
        """
        return _vsp_g.Matrix4d_initMat(self, *args)

    def mult(self, _in, out):
        r"""mult(Matrix4d self, double const [4] _in, double [4] out)"""
        return _vsp_g.Matrix4d_mult(self, _in, out)

    def data(self):
        r"""data(Matrix4d self) -> double *"""
        return _vsp_g.Matrix4d_data(self)

    def const_data(self):
        r"""const_data(Matrix4d self) -> double const *"""
        return _vsp_g.Matrix4d_const_data(self)

    def loadXZRef(self):
        r"""
        Load an identy Matrix4d and set the Y coordinate of the diagonal (index 5) to -1


        .. code-block:: python

                #==== Test Matrix4d ====//
            Matrix4d m()                            # Default Constructor

            m.loadXZRef()

            vec3d b = m.xform( vec3d( 1, 2, 3 ) )

        """
        return _vsp_g.Matrix4d_loadXZRef(self)

    def loadXYRef(self):
        r"""
        Load an identy Matrix4d and set the Z coordinate of the diagonal (index 10) to -1


        .. code-block:: python

                #==== Test Matrix4d ====//
            Matrix4d m()                            # Default Constructor

            m.loadXYRef()

            vec3d b = m.xform( vec3d( 1, 2, 3 ) )

        """
        return _vsp_g.Matrix4d_loadXYRef(self)

    def loadYZRef(self):
        r"""
        Load an identy Matrix4d and set the X coordinate of the diagonal (index 0) to -1


        .. code-block:: python

                #==== Test Matrix4d ====//
            Matrix4d m()                            # Default Constructor

            m.loadYZRef()

            vec3d b = m.xform( vec3d( 1, 2, 3 ) )

        """
        return _vsp_g.Matrix4d_loadYZRef(self)

    def mirrory(self):
        r"""
        Transform the Matrix4d by the given vector


        .. code-block:: python

                #==== Test Matrix4d ====//
            Matrix4d m()                            # Default Constructor

            m.loadIdentity()

            vec3d a = m.xform( vec3d( 1.0, 2.0, 3.0 ) )

        """
        return _vsp_g.Matrix4d_mirrory(self)

    def xform(self, _in):
        r"""xform(Matrix4d self, vec3d _in) -> vec3d"""
        return _vsp_g.Matrix4d_xform(self, _in)

    def xformvec(self, _in):
        r"""xformvec(Matrix4d self, Vec3dVec _in)"""
        return _vsp_g.Matrix4d_xformvec(self, _in)

    def xformmat(self, _in):
        r"""xformmat(Matrix4d self, std::vector< std::vector< vec3d,std::allocator< vec3d > >,std::allocator< std::vector< vec3d,std::allocator< vec3d > > > > & _in)"""
        return _vsp_g.Matrix4d_xformmat(self, _in)

    def xformnorm(self, _in):
        r"""xformnorm(Matrix4d self, vec3d _in) -> vec3d"""
        return _vsp_g.Matrix4d_xformnorm(self, _in)

    def xformnormvec(self, _in):
        r"""xformnormvec(Matrix4d self, Vec3dVec _in)"""
        return _vsp_g.Matrix4d_xformnormvec(self, _in)

    def xformnormmat(self, _in):
        r"""xformnormmat(Matrix4d self, std::vector< std::vector< vec3d,std::allocator< vec3d > >,std::allocator< std::vector< vec3d,std::allocator< vec3d > > > > & _in)"""
        return _vsp_g.Matrix4d_xformnormmat(self, _in)

    def getAngles(self):
        r"""
        Calculate the Matrix4d's angles between the X, Y and Z axes


        .. code-block:: python

                Matrix4d mat
            PI = 3.14

            mat.loadIdentity()

            m.rotate( PI / 4, vec3d( 0.0, 0.0, 1.0 ) )      # Radians

            vec3d angles = mat.getAngles()


        :rtype: :py:class:`vec3d`
        :return: Angle measurement between each axis (degrees)
        """
        return _vsp_g.Matrix4d_getAngles(self)

    def getArcballAngles(self):
        r"""getArcballAngles(Matrix4d self) -> vec3d"""
        return _vsp_g.Matrix4d_getArcballAngles(self)

    def getTranslation(self):
        r"""getTranslation(Matrix4d self) -> vec3d"""
        return _vsp_g.Matrix4d_getTranslation(self)

    def buildXForm(self, pos, rot, cent_rot):
        r"""
        Translate the Matrix4d to a given position and rotate it a about a given center of rotation
        :param [in]: pos Position to translate to
        :param [in]: rot Angle of rotation (degrees)
        :param [in]: cent_rot Center of rotation
        """
        return _vsp_g.Matrix4d_buildXForm(self, pos, rot, cent_rot)

    def getBasis(self, xdir, ydir, zdir):
        r"""getBasis(Matrix4d self, vec3d xdir, vec3d ydir, vec3d zdir)"""
        return _vsp_g.Matrix4d_getBasis(self, xdir, ydir, zdir)

    def setBasis(self, xdir, ydir, zdir):
        r"""setBasis(Matrix4d self, vec3d xdir, vec3d ydir, vec3d zdir)"""
        return _vsp_g.Matrix4d_setBasis(self, xdir, ydir, zdir)

    def getRotationAxis(self, axis_dir, axis_pnt, angle):
        r"""getRotationAxis(Matrix4d self, vec3d axis_dir, vec3d axis_pnt, double & angle)"""
        return _vsp_g.Matrix4d_getRotationAxis(self, axis_dir, axis_pnt, angle)

    def toQuat(self, qw, qx, qy, qz, tx, ty, tz):
        r"""toQuat(Matrix4d self, double & qw, double & qx, double & qy, double & qz, double & tx, double & ty, double & tz)"""
        return _vsp_g.Matrix4d_toQuat(self, qw, qx, qy, qz, tx, ty, tz)
    __swig_destroy__ = _vsp_g.delete_Matrix4d

# Register Matrix4d in _vsp_g:
_vsp_g.Matrix4d_swigregister(Matrix4d)

# **Placeholder start**
def IsFacade():
    """
    Returns True if the facade API is in use.


    .. code-block:: python

        is_facade = IsFacade()

    """

    return False
def IsGUIRunning():
    """
    Returns True if the GUI event loop is running.


    .. code-block:: python

        is_gui_active = IsGUIRunning()

    """

    return False
