APIDefines.h

//
// This file is released under the terms of the NASA Open Source Agreement (NOSA)
// version 1.3 as detailed in the LICENSE file which accompanies this software.
//
 
// API.h: interface for the Vehicle Class and Vehicle Mgr Singleton.
// J.R Gloudemans
//
 
#if !defined(VSPDEFINES__INCLUDED_)
#define VSPDEFINES__INCLUDED_
 
namespace vsp
{
enum ABS_REL_FLAG { ABS,        
                    REL 
};
 
enum AIRFOIL_EXPORT_TYPE { SELIG_AF_EXPORT,     
                           BEZIER_AF_EXPORT     
};
 
enum ALIGN_TYPE { ALIGN_LEFT,   
                  ALIGN_CENTER, 
                  ALIGN_RIGHT,  
                  ALIGN_PIXEL,  
                  ALIGN_TOP,    
                  ALIGN_MIDDLE, 
                  ALIGN_BOTTOM, 
                  NUM_ALIGN_TYPE,       
};
 
enum ANG_UNITS { ANG_RAD,       
                 ANG_DEG        
};
 
enum ANGLE { ANG_0,     
             ANG_90,    
             ANG_180,   
             ANG_270,   
             NUM_ANG,   
};
 
enum ATMOS_TYPE { ATMOS_TYPE_US_STANDARD_1976 = 0,      
                  ATMOS_TYPE_HERRINGTON_1966,   
                  ATMOS_TYPE_MANUAL_P_R,        
                  ATMOS_TYPE_MANUAL_P_T,        
                  ATMOS_TYPE_MANUAL_R_T,        
                  ATMOS_TYPE_MANUAL_RE_L        
};
 
enum ATTACH_TRANS_TYPE { ATTACH_TRANS_NONE = 0, 
                         ATTACH_TRANS_COMP,     
                         ATTACH_TRANS_UV,       
                         ATTACH_TRANS_RST,      
                         ATTACH_TRANS_LMN,      
                         ATTACH_TRANS_EtaMN,    
                         ATTACH_TRANS_NUM_TYPES 
};
 
enum ATTACH_ROT_TYPE { ATTACH_ROT_NONE = 0,     
                       ATTACH_ROT_COMP, 
                       ATTACH_ROT_UV,   
                       ATTACH_ROT_RST,  
                       ATTACH_ROT_LMN,  
                       ATTACH_ROT_EtaMN,        
                       ATTACH_ROT_NUM_TYPES     
};
 
enum BOR_MODE { BOR_FLOWTHROUGH,        
                BOR_UPPER,      
                BOR_LOWER,      
                BOR_NUM_MODES   
};
 
enum CAMBER_INPUT_FLAG { MAX_CAMB,      
                         DESIGN_CL      
};
 
enum CAP_TYPE { NO_END_CAP,     
                FLAT_END_CAP,   
                ROUND_END_CAP,  
                EDGE_END_CAP,   
                SHARP_END_CAP,  
                POINT_END_CAP,  
                ROUND_EXT_END_CAP_NONE, 
                ROUND_EXT_END_CAP_LE,   
                ROUND_EXT_END_CAP_TE,   
                ROUND_EXT_END_CAP_BOTH, 
                NUM_END_CAP_OPTIONS     
};
 
enum CFD_CONTROL_TYPE {     CFD_MIN_EDGE_LEN,   
                            CFD_MAX_EDGE_LEN,   
                            CFD_MAX_GAP,        
                            CFD_NUM_CIRCLE_SEGS,        
                            CFD_GROWTH_RATIO,   
                            CFD_LIMIT_GROWTH_FLAG,      
                            CFD_INTERSECT_SUBSURFACE_FLAG,      
                            CFD_HALF_MESH_FLAG, 
                            CFD_FAR_FIELD_FLAG, 
                            CFD_FAR_MAX_EDGE_LEN,       
                            CFD_FAR_MAX_GAP,    
                            CFD_FAR_NUM_CIRCLE_SEGS,    
                            CFD_FAR_SIZE_ABS_FLAG,      
                            CFD_FAR_LENGTH,     
                            CFD_FAR_WIDTH,      
                            CFD_FAR_HEIGHT,     
                            CFD_FAR_X_SCALE,    
                            CFD_FAR_Y_SCALE,    
                            CFD_FAR_Z_SCALE,    
                            CFD_FAR_LOC_MAN_FLAG,       
                            CFD_FAR_LOC_X,      
                            CFD_FAR_LOC_Y,      
                            CFD_FAR_LOC_Z,      
                            CFD_SRF_XYZ_FLAG,   
};
 
enum CFD_MESH_EXPORT_TYPE { CFD_STL_FILE_NAME,  
                            CFD_POLY_FILE_NAME, 
                            CFD_TRI_FILE_NAME,  
                            CFD_OBJ_FILE_NAME,  
                            CFD_DAT_FILE_NAME,  
                            CFD_KEY_FILE_NAME,  
                            CFD_GMSH_FILE_NAME, 
                            CFD_TKEY_FILE_NAME, 
                            CFD_FACET_FILE_NAME,        
                            CFD_VSPGEOM_FILE_NAME,      
                            CFD_NUM_FILE_NAMES, 
};
 
enum CFD_MESH_SOURCE_TYPE { POINT_SOURCE,       
                            LINE_SOURCE,        
                            BOX_SOURCE, 
                            ULINE_SOURCE,       
                            WLINE_SOURCE,       
                            NUM_SOURCE_TYPES,   
};
 
enum CFD_VIS_TYPE { TAG,    
                    REASON    
};
 
enum CF_LAM_EQN { CF_LAM_BLASIUS = 0,   
                  CF_LAM_BLASIUS_W_HEAT,          // TODO: Remove or implement
};
 
enum CF_TURB_EQN { CF_TURB_EXPLICIT_FIT_SPALDING = 0,   
                   CF_TURB_EXPLICIT_FIT_SPALDING_CHI,   
                   CF_TURB_EXPLICIT_FIT_SCHOENHERR,     
                   DO_NOT_USE_CF_TURB_IMPLICIT_KARMAN,  
                   CF_TURB_IMPLICIT_SCHOENHERR, 
                   CF_TURB_IMPLICIT_KARMAN_SCHOENHERR,  
                   CF_TURB_POWER_LAW_BLASIUS,   
                   CF_TURB_POWER_LAW_PRANDTL_LOW_RE,    
                   CF_TURB_POWER_LAW_PRANDTL_MEDIUM_RE, 
                   CF_TURB_POWER_LAW_PRANDTL_HIGH_RE,   
                   CF_TURB_SCHLICHTING_COMPRESSIBLE,    
                   DO_NOT_USE_CF_TURB_SCHLICHTING_INCOMPRESSIBLE,       
                   DO_NOT_USE_CF_TURB_SCHLICHTING_PRANDTL,      
                   DO_NOT_USE_CF_TURB_SCHULTZ_GRUNOW_HIGH_RE,   
                   CF_TURB_SCHULTZ_GRUNOW_SCHOENHERR,   
                   DO_NOT_USE_CF_TURB_WHITE_CHRISTOPH_COMPRESSIBLE,     
                   CF_TURB_ROUGHNESS_SCHLICHTING_AVG,   
                   DO_NOT_USE_CF_TURB_ROUGHNESS_SCHLICHTING_LOCAL,      
                   DO_NOT_USE_CF_TURB_ROUGHNESS_WHITE,  
                   CF_TURB_ROUGHNESS_SCHLICHTING_AVG_FLOW_CORRECTION,   
                   CF_TURB_HEATTRANSFER_WHITE_CHRISTOPH 
};
 
enum CHEVRON_TYPE { CHEVRON_NONE,       
                    CHEVRON_PARTIAL,    
                    CHEVRON_FULL,       
                    CHEVRON_NUM_TYPES   
};
 
enum CHEVRON_W01_MODES { CHEVRON_W01_SE, // Start and End       
                         CHEVRON_W01_CW, // Center and Width    
                         CHEVRON_W01_NUM_MODES  
};
 
enum COLLISION_ERRORS { COLLISION_OK,   
                        COLLISION_INTERSECT_NO_SOLUTION,        
                        COLLISION_CLEAR_NO_SOLUTION,    
};
 
enum COMPUTATION_FILE_TYPE  {   NO_FILE_TYPE        = 0,        
                                COMP_GEOM_TXT_TYPE  = 1,        
                                COMP_GEOM_CSV_TYPE  = 1<<1,     
                                DRAG_BUILD_TSV_TYPE_DEPRECATED = 1<<2,  
                                SLICE_TXT_TYPE      = 1<<3,     
                                MASS_PROP_TXT_TYPE  = 1<<4,     
                                DEGEN_GEOM_CSV_TYPE = 1<<5,     
                                DEGEN_GEOM_M_TYPE   = 1<<6,     
                                CFD_STL_TYPE        = 1<<7,     
                                CFD_POLY_TYPE       = 1<<8,     
                                CFD_TRI_TYPE        = 1<<9,     
                                CFD_OBJ_TYPE        = 1<<10,    
                                CFD_DAT_TYPE        = 1<<11,    
                                CFD_KEY_TYPE        = 1<<12,    
                                CFD_GMSH_TYPE       = 1<<13,    
                                CFD_SRF_TYPE_DEPRECATED        = 1<<14, 
                                CFD_TKEY_TYPE       = 1<<15,    
                                PROJ_AREA_CSV_TYPE  = 1<<16,    
                                WAVE_DRAG_TXT_TYPE  = 1<<17,    
                                VSPAERO_PANEL_TRI_TYPE = 1<<18, 
                                DRAG_BUILD_CSV_TYPE = 1<<19,    
                                CFD_FACET_TYPE      = 1<<20,    
                                CFD_CURV_TYPE_DEPRECATED       = 1<<21, 
                                CFD_PLOT3D_TYPE_DEPRECATED     = 1<<22, 
                                CFD_VSPGEOM_TYPE    = 1<<23,    
                                VSPAERO_VSPGEOM_TYPE = 1<<24,   
};
 
enum CONFORMAL_TRIM_TYPE { U_TRIM,      
                           L_TRIM,      
                           ETA_TRIM,    
                           NUM_TRIM_TYPES       
};
 
enum DELIM_TYPE { DELIM_COMMA,  
                  DELIM_USCORE, 
                  DELIM_SPACE,  
                  DELIM_NONE,   
                  DELIM_NUM_TYPES       
};
 
enum DEPTH_TYPE { DEPTH_FRONT,  
                  DEPTH_REAR,   
                  DEPTH_FREE,   
                  NUM_DEPTH_TYPE        
};
 
 
enum DIMENSION_SET { SET_3D,    
                     SET_2D,    
};
 
enum DIR_INDEX { X_DIR = 0,     
                 Y_DIR = 1,     
                 Z_DIR = 2,     
                 ALL_DIR = 3    
};
 
enum DISPLAY_TYPE { DISPLAY_BEZIER,     
                    DISPLAY_DEGEN_SURF, 
                    DISPLAY_DEGEN_PLATE,        
                    DISPLAY_DEGEN_CAMBER        
};
 
enum DRAW_TYPE { GEOM_DRAW_WIRE,        
                 GEOM_DRAW_HIDDEN,      
                 GEOM_DRAW_SHADE,       
                 GEOM_DRAW_TEXTURE,     
                 GEOM_DRAW_NONE 
};
 
enum ENGINE_GEOM_IO_TYPE { ENGINE_GEOM_NONE,    
                           ENGINE_GEOM_INLET,   
                           ENGINE_GEOM_INLET_OUTLET,    
                           ENGINE_GEOM_OUTLET,  
                           ENGINE_GEOM_IO_NUM_TYPES     
};
 
enum ENGINE_GEOM_TYPE { ENGINE_GEOM_FLOWTHROUGH,        
                        ENGINE_GEOM_TO_LIP,     
                        ENGINE_GEOM_FLOWPATH,   
                        ENGINE_GEOM_TO_FACE,    
                        ENGINE_GEOM_NUM_TYPES   
};
 
enum ENGINE_LOC_MODE { ENGINE_LOC_INDEX,        
                       ENGINE_LOC_U     
};
 
enum ENGINE_LOC_INDEX_TYPES { ENGINE_LOC_INLET_LIP,     
                              ENGINE_LOC_INLET_FACE,    
                              ENGINE_LOC_OUTLET_LIP,    
                              ENGINE_LOC_OUTLET_FACE,   
                              ENGINE_LOC_NUM    
};
 
enum ENGINE_MODE_TYPE { ENGINE_MODE_FLOWTHROUGH,        
                        ENGINE_MODE_FLOWTHROUGH_NEG,    
                        ENGINE_MODE_TO_LIP,     
                        ENGINE_MODE_TO_FACE,    
                        ENGINE_MODE_TO_FACE_NEG,        
                        ENGINE_MODE_EXTEND,     
                        ENGINE_MODE_NUM_TYPES   
};
 
enum ERROR_CODE {   VSP_OK,     
                    VSP_INVALID_PTR,    
                    VSP_INVALID_TYPE,   
                    VSP_CANT_FIND_TYPE, 
                    VSP_CANT_FIND_PARM, 
                    VSP_CANT_FIND_NAME, 
                    VSP_INVALID_GEOM_ID,        
                    VSP_FILE_DOES_NOT_EXIST,    
                    VSP_FILE_WRITE_FAILURE,     
                    VSP_FILE_READ_FAILURE,      
                    VSP_WRONG_GEOM_TYPE,        
                    VSP_WRONG_XSEC_TYPE,        
                    VSP_WRONG_FILE_TYPE,        
                    VSP_INDEX_OUT_RANGE,        
                    VSP_INVALID_XSEC_ID,        
                    VSP_INVALID_ID,     
                    VSP_CANT_SET_NOT_EQ_PARM,   
                    VSP_AMBIGUOUS_SUBSURF,      
                    VSP_INVALID_VARPRESET_SETNAME,      
                    VSP_INVALID_VARPRESET_GROUPNAME,    
                    VSP_CONFORMAL_PARENT_UNSUPPORTED,   
                    VSP_UNEXPECTED_RESET_REMAP_ID,      
                    VSP_INVALID_INPUT_VAL,      
                    VSP_INVALID_CF_EQN, 
                    VSP_INVALID_DRIVERS,        
                    VSP_ADV_LINK_BUILD_FAIL,    
                    VSP_DEPRECATED,     
                    VSP_LINK_LOOP_DETECTED,     
                    VSP_DUPLICATE_NAME, 
                    VSP_GUI_DEVICE_DEACTIVATED, 
                    VSP_NUM_ERROR_CODE  
};
 
enum EXCRES_TYPE { EXCRESCENCE_COUNT = 0,       
                   EXCRESCENCE_CD,      
                   EXCRESCENCE_PERCENT_GEOM,    
                   EXCRESCENCE_MARGIN,  
                   EXCRESCENCE_DRAGAREA,        
};
 
enum EXPORT_TYPE {  EXPORT_FELISA,        // TODO: Remove or implement
                    EXPORT_XSEC,        
                    EXPORT_STL, 
                    EXPORT_AWAVE,         // TODO: Remove or implement
                    EXPORT_NASCART,     
                    EXPORT_POVRAY,      
                    EXPORT_CART3D,      
                    EXPORT_VSPGEOM,     
                    EXPORT_VORXSEC,       // TODO: Remove or implement
                    EXPORT_XSECGEOM,      // TODO: Remove or implement
                    EXPORT_GMSH,        
                    EXPORT_X3D, 
                    EXPORT_STEP,        
                    EXPORT_PLOT3D,      
                    EXPORT_IGES,        
                    EXPORT_BEM, 
                    EXPORT_DXF, 
                    EXPORT_FACET,       
                    EXPORT_SVG, 
                    EXPORT_PMARC,       
                    EXPORT_OBJ, 
                    EXPORT_SELIG_AIRFOIL,       
                    EXPORT_BEZIER_AIRFOIL,      
                    EXPORT_IGES_STRUCTURE,      
                    EXPORT_STEP_STRUCTURE       
};
 
enum FEA_BC_TYPE { FEA_BC_STRUCTURE,    
                   FEA_BC_PART, 
                   FEA_BC_SUBSURF,      
                   FEA_NUM_BC_TYPES     
};
 
enum FEA_BC_MODE { FEA_BCM_USER,        
                   FEA_BCM_ALL, 
                   FEA_BCM_PIN, 
                   FEA_BCM_SYMM,        
                   FEA_BCM_ASYMM,       
                   FEA_NUM_BCM_MODES    
};
 
enum FEA_CROSS_SECT_TYPE { FEA_XSEC_GENERAL = 0,        
                           FEA_XSEC_CIRC,       
                           FEA_XSEC_PIPE,       
                           FEA_XSEC_I,  
                           FEA_XSEC_RECT,       
                           FEA_XSEC_BOX 
};
 
enum FEA_EXPORT_TYPE { FEA_MASS_FILE_NAME,      
                       FEA_NASTRAN_FILE_NAME,   
                       FEA_NKEY_FILE_NAME,      
                       FEA_CALCULIX_FILE_NAME,  
                       FEA_STL_FILE_NAME,       
                       FEA_GMSH_FILE_NAME,      
                       FEA_SRF_FILE_NAME,       
                       FEA_CURV_FILE_NAME,      
                       FEA_PLOT3D_FILE_NAME,    
                       FEA_IGES_FILE_NAME,      
                       FEA_STEP_FILE_NAME,      
                       FEA_NUM_FILE_NAMES       
};
 
enum FEA_FIX_PT_TYPE { FEA_FIX_PT_ON_BODY,      
                       FEA_FIX_PT_GLOBAL_XYZ,   
                       FEA_FIX_PT_DELTA_XYZ,    
                       FEA_FIX_PT_DELTA_UVN,    
                       FEA_FIX_PT_GEOM_ORIGIN,  
                       FEA_FIX_PT_GEOM_CG,      
                       FEA_NUM_FIX_PT_TYPES     
};
 
enum FEA_MATERIAL_TYPE { FEA_ISOTROPIC, 
                         FEA_ENG_ORTHO, 
                         FEA_ENG_ORTHO_TRANS_ISO,       
                         FEA_LAMINATE,  
                         FEA_NUM_MAT_TYPES      
};
 
enum FEA_ORIENTATION_TYPE { FEA_ORIENT_GLOBAL_X,        
                            FEA_ORIENT_GLOBAL_Y,        
                            FEA_ORIENT_GLOBAL_Z,        
                            FEA_ORIENT_COMP_X,  
                            FEA_ORIENT_COMP_Y,  
                            FEA_ORIENT_COMP_Z,  
                            FEA_ORIENT_PART_U,  
                            FEA_ORIENT_PART_V,  
                            FEA_ORIENT_OML_U,   
                            FEA_ORIENT_OML_V,   
                            FEA_ORIENT_OML_R,   
                            FEA_ORIENT_OML_S,   
                            FEA_ORIENT_OML_T,   
                            FEA_NUM_ORIENT_TYPES        
};
 
enum FEA_PART_ELEMENT_TYPE { FEA_DEPRECATED = -1,       
                             FEA_SHELL = 0,     
                             FEA_BEAM,  
                             FEA_SHELL_AND_BEAM,        
                             FEA_NO_ELEMENTS,   
                             FEA_NUM_ELEMENT_TYPES      
};
 
enum FEA_SHELL_TREATMENT_TYPE { FEA_KEEP = 0,   
                                FEA_DELETE,     
                                FEA_NUM_SHELL_TREATMENT_TYPES   
};
 
enum FEA_PART_TYPE { FEA_SLICE = 0,     
                     FEA_RIB,   
                     FEA_SPAR,  
                     FEA_FIX_POINT,     
                     FEA_DOME,  
                     FEA_RIB_ARRAY,     
                     FEA_SLICE_ARRAY,   
                     FEA_SKIN,  
                     FEA_TRIM,  
                     FEA_NUM_TYPES      
};
 
enum FEA_SLICE_TYPE { XY_BODY = 0,      
                      YZ_BODY,  
                      XZ_BODY,  
                      XY_ABS,   
                      YZ_ABS,   
                      XZ_ABS,   
                      SPINE_NORMAL      
};
 
enum FEA_UNIT_TYPE { SI_UNIT = 0, 
                     CGS_UNIT, 
                     MPA_UNIT, 
                     BFT_UNIT, 
                     BIN_UNIT 
};
 
enum FEA_RIB_NORMAL { NO_NORMAL,        
                      LE_NORMAL,        
                      TE_NORMAL,        
                      SPAR_NORMAL       
};
 
enum FF_B_EQN { FF_B_MANUAL = 0,        
                FF_B_SCHEMENSKY_FUSE,   
                FF_B_SCHEMENSKY_NACELLE,        
                FF_B_HOERNER_STREAMBODY,        
                FF_B_TORENBEEK, 
                FF_B_SHEVELL,   
                FF_B_COVERT,    
                FF_B_JENKINSON_FUSE,    
                FF_B_JENKINSON_WING_NACELLE,    
                FF_B_JENKINSON_AFT_FUSE_NACELLE,        
};
 
enum FF_W_EQN { FF_W_MANUAL = 0,        
                FF_W_EDET_CONV, 
                FF_W_EDET_ADV,  
                FF_W_HOERNER,   
                FF_W_COVERT,    
                FF_W_SHEVELL,   
                FF_W_KROO,      
                FF_W_TORENBEEK, 
                FF_W_DATCOM,    
                FF_W_SCHEMENSKY_6_SERIES_AF,    
                FF_W_SCHEMENSKY_4_SERIES_AF,    
                FF_W_JENKINSON_WING,    
                FF_W_JENKINSON_TAIL,    
                FF_W_SCHEMENSKY_SUPERCRITICAL_AF,       
};
 
enum FREESTREAM_PD_UNITS { PD_UNITS_IMPERIAL = 0,       
                           PD_UNITS_METRIC      
};
 
enum FILE_CHOOSER_MODE { OPEN,  
                         SAVE,  
                         NUM_FILE_CHOOSER_MODES 
};
 
enum FILE_CHOOSER_TYPE { FC_OPENVSP,    
                         FC_NATIVE,     
                         NUM_FILE_CHOOSER_TYPES 
};
 
enum GDEV { GDEV_TAB,   
            GDEV_SCROLL_TAB,    
            GDEV_GROUP, 
            GDEV_PARM_BUTTON,   
            GDEV_INPUT, 
            GDEV_OUTPUT,        
            GDEV_SLIDER,        
            GDEV_SLIDER_ADJ_RANGE,      
            GDEV_CHECK_BUTTON,  
            GDEV_CHECK_BUTTON_BIT,      
            GDEV_RADIO_BUTTON,  
            GDEV_TOGGLE_BUTTON, 
            GDEV_TOGGLE_RADIO_GROUP,      // TODO: Implement or remove
            GDEV_TRIGGER_BUTTON,        
            GDEV_COUNTER,       
            GDEV_CHOICE,        
            GDEV_ADD_CHOICE_ITEM,       
            GDEV_SLIDER_INPUT,  
            GDEV_SLIDER_ADJ_RANGE_INPUT,        
            GDEV_SLIDER_ADJ_RANGE_TWO_INPUT,      // TODO: Implement or remove
            GDEV_FRACT_PARM_SLIDER,     
            GDEV_STRING_INPUT,  
            GDEV_INDEX_SELECTOR,        
            GDEV_COLOR_PICKER,  
            GDEV_YGAP,  
            GDEV_DIVIDER_BOX,   
            GDEV_BEGIN_SAME_LINE,       
            GDEV_END_SAME_LINE, 
            GDEV_FORCE_WIDTH,   
            GDEV_SET_FORMAT,    
            NUM_GDEV_TYPES,     
            ALL_GDEV_TYPES, 
};
 
enum GENDER { MALE,     
              FEMALE    
};
 
enum GUI_GEOM_SCREEN { POD_GEOM_SCREEN, 
                       FUSELAGE_GEOM_SCREEN,    
                       MS_WING_GEOM_SCREEN,     
                       BLANK_GEOM_SCREEN,       
                       MESH_GEOM_SCREEN,        
                       STACK_GEOM_SCREEN,       
                       CUSTOM_GEOM_SCREEN,      
                       PT_CLOUD_GEOM_SCREEN,    
                       PROP_GEOM_SCREEN,        
                       HINGE_GEOM_SCREEN,       
                       MULT_GEOM_SCREEN,        
                       CONFORMAL_SCREEN,        
                       ELLIPSOID_GEOM_SCREEN,   
                       BOR_GEOM_SCREEN, 
                       WIRE_FRAME_GEOM_SCREEN,  
                       HUMAN_GEOM_SCREEN,       
                       NUM_GEOM_SCREENS,        
                       ALL_GEOM_SCREENS 
};
 
enum GUI_VSP_SCREEN { VSP_ADV_LINK_SCREEN,      
                      VSP_ADV_LINK_VAR_RENAME_SCREEN,   
                      VSP_AERO_STRUCT_SCREEN,   
                      VSP_AIRFOIL_CURVES_EXPORT_SCREEN, 
                      VSP_AIRFOIL_POINTS_EXPORT_SCREEN, 
                      VSP_BACKGROUND_SCREEN,    
                      VSP_BACKGROUND3D_SCREEN,  
                      VSP_BACKGROUND3D_PREVIEW_SCREEN,  
                      VSP_BEM_OPTIONS_SCREEN,   
                      VSP_CFD_MESH_SCREEN,      
                      VSP_CLIPPING_SCREEN,      
                      VSP_COMP_GEOM_SCREEN,     
                      VSP_COR_SCREEN,   
                      VSP_CURVE_EDIT_SCREEN,    
                      VSP_DEGEN_GEOM_SCREEN,    
                      VSP_DESIGN_VAR_SCREEN,    
                      VSP_DXF_OPTIONS_SCREEN,   
                      VSP_EXPORT_SCREEN,        
                      VSP_FEA_PART_EDIT_SCREEN, 
                      VSP_FEA_XSEC_SCREEN,      
                      VSP_FIT_MODEL_SCREEN,     
                      VSP_IGES_OPTIONS_SCREEN,  
                      VSP_IGES_STRUCTURE_OPTIONS_SCREEN,        
                      VSP_EXPORT_CUSTOM_SCRIPT, 
                      VSP_IMPORT_SCREEN,        
                      VSP_LIGHTING_SCREEN,      
                      VSP_MANAGE_GEOM_SCREEN,   
                      VSP_MANAGE_TEXTURE_SCREEN,        
                      VSP_MASS_PROP_SCREEN,     
                      VSP_MATERIAL_EDIT_SCREEN, 
                      VSP_MEASURE_SCREEN,       
                      VSP_NERF_MANAGE_GEOM_SCREEN,  
                      VSP_SNAP_TO_SCREEN,       
                      VSP_PARASITE_DRAG_SCREEN, 
                      VSP_PARM_DEBUG_SCREEN,    
                      VSP_PARM_LINK_SCREEN,     
                      VSP_PARM_SCREEN,  
                      VSP_PICK_SET_SCREEN,      
                      VSP_PREFERENCES_SCREEN,   
                      VSP_PROJECTION_SCREEN,    
                      VSP_PSLICE_SCREEN,        
                      VSP_SCREENSHOT_SCREEN,    
                      VSP_SELECT_FILE_SCREEN,   
                      VSP_SET_EDITOR_SCREEN,    
                      VSP_STEP_OPTIONS_SCREEN,  
                      VSP_STEP_STRUCTURE_OPTIONS_SCREEN,        
                      VSP_STL_OPTIONS_SCREEN,   
                      VSP_STRUCT_SCREEN,        
                      VSP_STRUCT_ASSEMBLY_SCREEN,       
                      VSP_SURFACE_INTERSECTION_SCREEN,  
                      VSP_SVG_OPTIONS_SCREEN,   
                      VSP_USER_PARM_SCREEN,     
                      VSP_VAR_PRESET_SCREEN,    
                      VSP_VIEW_SCREEN,  
                      VSP_VSPAERO_PLOT_SCREEN,  
                      VSP_VSPAERO_SCREEN,       
                      VSP_XSEC_SCREEN,  
                      VSP_WAVEDRAG_SCREEN,      
                      VSP_MAIN_SCREEN,    // Leave at end of list, helps draw after update.
                      VSP_NUM_SCREENS,  
                      VSP_ALL_SCREENS   
};
 
enum INIT_EDIT_XSEC_TYPE { EDIT_XSEC_CIRCLE,    
                           EDIT_XSEC_ELLIPSE,   
                           EDIT_XSEC_RECTANGLE  
};
 
enum IMPORT_TYPE {  IMPORT_STL, 
                    IMPORT_NASCART,     
                    IMPORT_CART3D_TRI,  
                    IMPORT_XSEC_MESH,   
                    IMPORT_PTS, 
                    IMPORT_V2,  
                    IMPORT_BEM, 
                    IMPORT_XSEC_WIRE,   
                    IMPORT_P3D_WIRE     
};
 
enum INTERSECT_EXPORT_TYPE { INTERSECT_SRF_FILE_NAME,   
                             INTERSECT_CURV_FILE_NAME,  
                             INTERSECT_PLOT3D_FILE_NAME,        
                             INTERSECT_IGES_FILE_NAME,  
                             INTERSECT_STEP_FILE_NAME,  
                             INTERSECT_NUM_FILE_NAMES   
};
 
enum LEN_UNITS { LEN_MM,        
                 LEN_CM,        
                 LEN_M, 
                 LEN_IN,        
                 LEN_FT,        
                 LEN_YD,        
                 LEN_UNITLESS,  
                 NUM_LEN_UNIT   
};
 
enum MASS_UNIT { MASS_UNIT_G = 0,       
                 MASS_UNIT_KG,  
                 MASS_UNIT_TONNE,       
                 MASS_UNIT_LBM, 
                 MASS_UNIT_SLUG,        
                 MASS_LBFSEC2IN,    
                 NUM_MASS_UNIT  
};
 
enum MESH_REASON { NO_REASON,   
                   MAX_LEN_CONSTRAINT,  
                   CURV_GAP,    
                   CURV_NCIRCSEG,       
                   SOURCES,     
                   MIN_LEN_CONSTRAINT,                                                                   // MAX_LEN_CONSTRAINT + MIN_LEN_INCREMENT
                   MIN_LEN_CONSTRAINT_CURV_GAP,                                    // CURV_GAP + MIN_LEN_INCREMENT
                   MIN_LEN_CONSTRAINT_CURV_NCIRCSEG,     // CURV_NCIRCSEG + MIN_LEN_INCREMENT
                   MIN_LEN_CONSTRAINT_SOURCES,                      // Placeholder -- min len not applied to sources.
                   GROW_LIMIT_MAX_LEN_CONSTRAINT,       
                   GROW_LIMIT_CURV_GAP, 
                   GROW_LIMIT_CURV_NCIRCSEG,    
                   GROW_LIMIT_SOURCES,  
                   GROW_LIMIT_MIN_LEN_CONSTRAINT,       
                   GROW_LIMIT_MIN_LEN_CONSTRAINT_CURV_GAP,      
                   GROW_LIMIT_MIN_LEN_CONSTRAINT_CURV_NCIRCSEG, 
                   GROW_LIMIT_MIN_LEN_CONSTRAINT_SOURCES,       
                   NUM_MESH_REASON,     
                   MIN_LEN_INCREMENT = MIN_LEN_CONSTRAINT - MAX_LEN_CONSTRAINT, 
                   GROW_LIMIT_INCREMENT = GROW_LIMIT_CURV_GAP - CURV_GAP,       
                   MIN_GROW_LIMIT = GROW_LIMIT_CURV_GAP 
};
 
enum PARM_TYPE { PARM_DOUBLE_TYPE,      
                 PARM_INT_TYPE, 
                 PARM_BOOL_TYPE,        
                 PARM_FRACTION_TYPE,    
                 PARM_LIMITED_INT_TYPE, 
                 PARM_NOTEQ_TYPE,       
                 PARM_POWER_INT_TYPE    
};
 
enum PATCH_TYPE { PATCH_NONE,   
                  PATCH_POINT,  
                  PATCH_LINE,   
                  PATCH_COPY,   
                  PATCH_HALFWAY,        
                  PATCH_NUM_TYPES       
};
 
enum PCURV_TYPE { LINEAR,       
                  PCHIP,        
                  CEDIT,        
                  APPROX_CEDIT, 
                  NUM_PCURV_TYPE        
};
 
enum PRES_UNITS { PRES_UNIT_PSF = 0,    
                  PRES_UNIT_PSI,        
                  PRES_UNIT_BA, 
                  PRES_UNIT_PA, 
                  PRES_UNIT_KPA,        
                  PRES_UNIT_MPA,        
                  PRES_UNIT_INCHHG,     
                  PRES_UNIT_MMHG,       
                  PRES_UNIT_MMH20,      
                  PRES_UNIT_MB, 
                  PRES_UNIT_ATM,        
                  NUM_PRES_UNIT 
};
 
enum PROJ_BNDY_TYPE { NO_BOUNDARY,      
                      SET_BOUNDARY,     
                      GEOM_BOUNDARY,    
                      NUM_PROJ_BNDY_OPTIONS     
};
 
enum PROJ_DIR_TYPE { X_PROJ,    
                     Y_PROJ,    
                     Z_PROJ,    
                     GEOM_PROJ, 
                     VEC_PROJ,  
                     NUM_PROJ_DIR_OPTIONS       
};
 
enum PROJ_TGT_TYPE { SET_TARGET,        
                     GEOM_TARGET,       
                     NUM_PROJ_TGT_OPTIONS       
};
 
enum PROP_MODE { PROP_BLADES,   
                 PROP_BOTH,     
                 PROP_DISK      
};
 
enum PROP_PCURVE { PROP_CHORD,  
                   PROP_TWIST,  
                   PROP_RAKE,   
                   PROP_SKEW,   
                   PROP_SWEEP,  
                   PROP_THICK,  
                   PROP_CLI,    
                   PROP_AXIAL,  
                   PROP_TANGENTIAL,     
                   NUM_PROP_PCURVE      
};
 
enum REORDER_TYPE { REORDER_MOVE_UP,    
                    REORDER_MOVE_DOWN,  
                    REORDER_MOVE_TOP,   
                    REORDER_MOVE_BOTTOM,        
                    NUM_REORDER_TYPES   
};
 
enum REF_WING_TYPE { MANUAL_REF = 0,    
                     COMPONENT_REF, 
                     NUM_REF_TYPES      
};
 
enum RES_DATA_TYPE {    INVALID_TYPE = -1,      
                        INT_DATA = 0,   
                        DOUBLE_DATA = 1,        
                        STRING_DATA = 2,        
                        VEC3D_DATA = 3, 
                        DOUBLE_MATRIX_DATA = 4, 
};
 
enum RES_GEOM_TYPE {    MESH_INDEXED_TRI,       
                        MESH_SLICE_TRI, 
                        GEOM_XSECS,     
                        MESH_INDEX_AND_SLICE_TRI,       
};
 
enum RHO_UNITS { RHO_UNIT_SLUG_FT3 = 0, 
                 RHO_UNIT_G_CM3,        
                 RHO_UNIT_KG_M3,        
                 RHO_UNIT_TONNE_MM3,    
                 RHO_UNIT_LBM_FT3,      
                 RHO_UNIT_LBFSEC2_IN4,  
                 RHO_UNIT_LBM_IN3,      
                 NUM_RHO_UNIT   
};
 
enum SCALE_TYPE { SCALE_WIDTH,  
                  SCALE_HEIGHT, 
                  SCALE_WIDTH_HEIGHT,   
                  SCALE_RESOLUTION,     
                  NUM_SCALE_TYPES,      
};
 
enum SET_TYPE { SET_NONE = -1,  
                SET_ALL = 0,    
                SET_SHOWN = 1,  
                SET_NOT_SHOWN = 2,      
                SET_FIRST_USER = 3,     
                MIN_NUM_USER = 20,  
                MAX_NUM_SETS = 1000     
};
 
enum STEP_REPRESENTATION { STEP_SHELL,  
                           STEP_BREP    
};
 
enum SUBSURF_INCLUDE { SS_INC_TREAT_AS_PARENT,  
                       SS_INC_SEPARATE_TREATMENT,       
                       SS_INC_ZERO_DRAG,        
};
 
enum SUBSURF_INOUT { INSIDE,    
                     OUTSIDE,   
                     NONE       
};
 
enum SUBSURF_LINE_TYPE { CONST_U,       
                         CONST_W        
};
 
enum SUBSURF_TYPE { SS_LINE,    
                    SS_RECTANGLE,       
                    SS_ELLIPSE, 
                    SS_CONTROL, 
                    SS_LINE_ARRAY,      
                    SS_FINITE_LINE,     
                    SS_NUM_TYPES        
};
 
enum SYM_FLAG {  SYM_XY = ( 1 << 0 ),    
                 SYM_XZ = ( 1 << 1 ),   
                 SYM_YZ = ( 1 << 2 ),   
                 SYM_ROT_X = ( 1 << 3 ),        
                 SYM_ROT_Y = ( 1 << 4 ),        
                 SYM_ROT_Z = ( 1 << 5 ),        
                 SYM_PLANAR_TYPES = 3,  
                 SYM_NUM_TYPES = 6      
};
 
enum SYM_XSEC_TYP { SYM_NONE,    
                    SYM_RL,    
                    SYM_TB,    
                    SYM_ALL    
};
 
enum TEMP_UNITS { TEMP_UNIT_K = 0,      
                  TEMP_UNIT_C,  
                  TEMP_UNIT_F,  
                  TEMP_UNIT_R,  
                  NUM_TEMP_UNIT 
};
 
enum VEL_UNITS { V_UNIT_FT_S = 0,       
                 V_UNIT_M_S,    
                 V_UNIT_MPH,    
                 V_UNIT_KM_HR,  
                 V_UNIT_KEAS,   
                 V_UNIT_KTAS,   
                 V_UNIT_MACH,   
};
 
enum VIEW_NUM { VIEW_1, 
                VIEW_2HOR,      
                VIEW_2VER,      
                VIEW_4, 
};
 
enum VIEW_ROT { ROT_0,  
                ROT_90, 
                ROT_180,        
                ROT_270,        
};
 
enum VIEW_TYPE { VIEW_LEFT,     
                 VIEW_RIGHT,    
                 VIEW_TOP,      
                 VIEW_BOTTOM,   
                 VIEW_FRONT,    
                 VIEW_REAR,     
                 VIEW_NONE,     
                 VIEW_NUM_TYPES 
};
 
enum VSPAERO_ANALYSIS_METHOD { VORTEX_LATTICE,  
                               PANEL    
};
 
enum VSPAERO_NOISE_TYPE { NOISE_FLYBY,  
                          NOISE_FOOTPRINT,      
                          NOISE_STEADY, 
};
 
enum VSPAERO_NOISE_UNIT { NOISE_SI,     
                          NOISE_ENGLISH 
};
 
enum VSPAERO_PRECONDITION { PRECON_MATRIX = 0,  
                            PRECON_JACOBI,      
                            PRECON_SSOR,        
};
 
enum VSPAERO_STABILITY_TYPE { STABILITY_OFF = 0,        
                              STABILITY_DEFAULT = 1,    
                              STABILITY_P_ANALYSIS = 2, 
                              STABILITY_Q_ANALYSIS = 3, 
                              STABILITY_R_ANALYSIS = 4, 
                              STABILITY_PITCH = 5,      
                              STABILITY_NUM_TYPES = 6   
};
 
enum VSPAERO_CLMAX_TYPE { CLMAX_OFF,    
                          CLMAX_2D,     
                          CLMAX_CARLSON    
};
 
enum VSP_SURF_CFD_TYPE { CFD_NORMAL,    
                         CFD_NEGATIVE,  
                         CFD_TRANSPARENT,       
                         CFD_STRUCTURE, 
                         CFD_STIFFENER, 
                         CFD_MEASURE_DUCT,      
                         CFD_NUM_TYPES, 
};
 
enum VSP_SURF_TYPE { NORMAL_SURF,       
                     WING_SURF, 
                     DISK_SURF, 
                     NUM_SURF_TYPES,    
};
 
enum W_HINT { W_RIGHT_0,    
              W_BOTTOM,    
              W_LEFT,   
              W_TOP,    
              W_RIGHT_1,        
              W_FREE,   
};
 
enum WING_BLEND { BLEND_FREE,   
                  BLEND_ANGLES, 
                  BLEND_MATCH_IN_LE_TRAP,       
                  BLEND_MATCH_IN_TE_TRAP,       
                  BLEND_MATCH_OUT_LE_TRAP,      
                  BLEND_MATCH_OUT_TE_TRAP,      
                  BLEND_MATCH_IN_ANGLES,        
                  BLEND_MATCH_LE_ANGLES,        
                  BLEND_NUM_TYPES       
};
 
enum WING_DRIVERS { AR_WSECT_DRIVER,    
                    SPAN_WSECT_DRIVER,  
                    AREA_WSECT_DRIVER,  
                    TAPER_WSECT_DRIVER, 
                    AVEC_WSECT_DRIVER,  
                    ROOTC_WSECT_DRIVER, 
                    TIPC_WSECT_DRIVER,  
                    SECSWEEP_WSECT_DRIVER,      
                    NUM_WSECT_DRIVER,   
                    SWEEP_WSECT_DRIVER = SECSWEEP_WSECT_DRIVER + 1,     
                    SWEEPLOC_WSECT_DRIVER = SECSWEEP_WSECT_DRIVER + 2,  
                    SECSWEEPLOC_WSECT_DRIVER = SECSWEEP_WSECT_DRIVER + 3,       
};
 
enum XDDM_QUANTITY_TYPE { XDDM_VAR,     
                          XDDM_CONST,   
};
 
enum XSEC_CLOSE_TYPE { CLOSE_NONE,      
                       CLOSE_SKEWLOW,   
                       CLOSE_SKEWUP,    
                       CLOSE_SKEWBOTH,  
                       CLOSE_EXTRAP,    
                       CLOSE_NUM_TYPES  
};
 
enum XSEC_CRV_TYPE {XS_UNDEFINED = -1,  
                    XS_POINT,   
                    XS_CIRCLE,  
                    XS_ELLIPSE, 
                    XS_SUPER_ELLIPSE,   
                    XS_ROUNDED_RECTANGLE,       
                    XS_GENERAL_FUSE,    
                    XS_FILE_FUSE,       
                    XS_FOUR_SERIES,     
                    XS_SIX_SERIES,      
                    XS_BICONVEX,        
                    XS_WEDGE,   
                    XS_EDIT_CURVE,      
                    XS_FILE_AIRFOIL,    
                    XS_CST_AIRFOIL,     
                    XS_VKT_AIRFOIL,     
                    XS_FOUR_DIGIT_MOD,  
                    XS_FIVE_DIGIT,      
                    XS_FIVE_DIGIT_MOD,  
                    XS_ONE_SIX_SERIES,  
                    XS_NUM_TYPES        
};
 
enum XSEC_DRIVERS { WIDTH_XSEC_DRIVER,     // First two are used for Circle.  Others are used for general XSecCurves    
                    AREA_XSEC_DRIVER,      // Area must be second entry.        
                    HEIGHT_XSEC_DRIVER, 
                    HWRATIO_XSEC_DRIVER,        
                    NUM_XSEC_DRIVER,    
                    CIRCLE_NUM_XSEC_DRIVER = 2  
};
 
enum XSEC_SIDES_TYPE {  XSEC_BOTH_SIDES,        
                        XSEC_LEFT_SIDE, 
                        XSEC_RIGHT_SIDE 
};
 
enum XSEC_TRIM_TYPE { TRIM_NONE,        
                      TRIM_X,   
                      TRIM_THICK,       
                      TRIM_NUM_TYPES    
};
 
enum XSEC_TYPE { XSEC_FUSE,     
                 XSEC_STACK,    
                 XSEC_WING,     
                 XSEC_CUSTOM,   
                 XSEC_PROP,     
                 XSEC_NUM_TYPES 
};
 
enum XSEC_WIDTH_SHIFT { XS_SHIFT_LE = 0,        
                        XS_SHIFT_MID = 1,       
                        XS_SHIFT_TE = 2 
};
 
}
 
#endif